Lines Matching +full:ath10k +full:- +full:calibration +full:- +full:variant

1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qcom/qcom-ipq4019.dtsi"
4 #include "qcom-ipq4019-ethernet.dtsi"
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8 #include <dt-bindings/soc/qcom,tcsr.h>
11 	model = "ASUS RT-AC58U";
12 	compatible = "asus,rt-ac58u";
20 		led-boot = &led_power;
21 		led-failsafe = &led_power;
22 		led-running = &led_power;
23 		led-upgrade = &led_power;
28 		bootargs-append = " ubi.mtd=UBI_DEV";
29 //		stdout-path = "serial0:115200n8";
30 		stdout-path = "serial0";
42 		ess-psgmii@98000 {
55 			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
61 			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
74 				#address-cells = <1>;
75 				#size-cells = <0>;
79 					#trigger-source-cells = <0>;
84 					#trigger-source-cells = <0>;
97 		ess-switch@c000000 {
107 		compatible = "gpio-keys";
123 		compatible = "gpio-leds";
138 			linux,default-trigger = "phy0tpt";
144 			linux,default-trigger = "phy1tpt";
150 			trigger-sources = <&usb3_port1>, <&usb3_port2>;
151 			linux,default-trigger = "usbport";
174 			bias-disable;
182 			drive-strength = <12>;
183 			bias-disable;
189 			drive-strength = <2>;
190 			bias-disable;
191 			output-high;
197 	pinctrl-0 = <&spi_0_pins>;
198 	pinctrl-names = "default";
200 	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
205 		 * U-boot looks for "n25q128a11" node,
209 		compatible = "jedec,spi-nor";
212 		spi-max-frequency = <30000000>;
215 			compatible = "fixed-partitions";
216 			#address-cells = <1>;
217 			#size-cells = <1>;
222 				read-only;
227 				read-only;
232 				read-only;
237 				read-only;
242 				read-only;
247 				read-only;
252 				read-only;
257 				read-only;
259 			/* 0x00180000 - 0x00200000 unused */
263 	spi-nand@1 {
264 		compatible = "spi-nand";
266 		spi-max-frequency = <30000000>;
269 		 * U-boot looks for "spinand,mt29f" node,
275 			compatible = "fixed-partitions";
276 			#address-cells = <1>;
277 			#size-cells = <1>;
282 				 *       also drop the bootargs-append and all the
293 	pinctrl-0 = <&serial_pins>;
294 	pinctrl-names = "default";
308 	qcom,ath10k-calibration-variant = "RT-AC58U";
313 	qcom,ath10k-calibration-variant = "RT-AC58U";