Lines Matching refs:channel
2 It can be configured to have one channel or two channels. If configured
7 target devices. It can be configured to have one channel or two channels.
28 - dma-channel child node: Should have at least one channel and can have up to
30 DMA channel (see child node properties below).
59 - xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
62 {2}, flush mm2s channel
63 {3}, flush s2mm channel
67 For VDMA: It should be either "xlnx,axi-vdma-mm2s-channel" or
68 "xlnx,axi-vdma-s2mm-channel".
69 For CDMA: It should be "xlnx,axi-cdma-channel".
70 For AXIDMA and MCDMA: It should be either "xlnx,axi-dma-mm2s-channel"
71 or "xlnx,axi-dma-s2mm-channel".
72 - interrupts: Should contain per channel VDMA interrupts.
101 dma-channel@40030000 {
102 compatible = "xlnx,axi-vdma-mm2s-channel";
106 dma-channel@40030030 {
107 compatible = "xlnx,axi-vdma-s2mm-channel";
119 channel. For MCMDA, MM2S channel(write/tx) ID start from
120 '0' and is in [0-15] range. S2MM channel(read/rx) ID start
124 - dma-names: a list of DMA channel names, one per "dmas" entry