Lines Matching +full:non +full:- +full:armv7
1 Updating Information for users of FreeBSD-CURRENT.
9 https://docs.freebsd.org/en/books/handbook/cutting-edge/#makeworld
22 includes various WITNESS- related kernel options, INVARIANTS, malloc
28 at runtime, run "ln -s 'abort:false,junk:false' /etc/malloc.conf".)
42 package, FreeBSD-bmake. If you use pkgbase and you need make, you
49 gssd(8) has been moved to a new package, FreeBSD-gssd. If you use
54 have been renamed from FreeBSD-krb5* to FreeBSD-kerberos*. This
59 In either case, if you have FreeBSD-krb5* packages installed, you
60 should remove them and (re)install the equivalent FreeBSD-kerberos*
76 sysutils/freebsd-shar port was created to maintain this version of
80 LinuxKPI device.h and acpi changes effecting drivers and drm-kmod.
87 All NFS related modules must be rebuilt from up-to-date
91 "make delete-old" will now remove the Forth bootloader entirely
95 MIT KRB5 (MIT Kerberos5) has been imported into 15-CURRENT. To
98 1.5.2 when delete-old and delete-old-libs are run. To revert back
99 simply buildworld/installworld again with delete-old-libs and
100 delete-old.
104 The few affected ports must be rebuilt. A successful exp-run will be
112 LinuxKPI dma-mapping.h were pulled into the tree from drm-kmod.
121 pf now blocks IPv6 packets with a hop-by-hop or destination options header by
122 default. Such packets can be passed by adding "allow-opts" to the rule. IPv6
127 has moved to the new FreeBSD-ctl package. If you use pkgbase and you
130 Development-related tools (e.g. ar and nm) have moved to the new
131 "FreeBSD-toolchain" package, which subsumes and obsoletes the
132 existing "FreeBSD-elftoolchain" package. If you use pkgbase and
134 ensure the old FreeBSD-elftoolchain* packages are completely removed.
139 however it does not have any in-tree consumers since the introduction
154 UMASS quirks and auto-quirk probing has been overhauled. CAM now won't
157 in 14 and broke several e-readers and the like). Please send imp@freebsd.org
166 memory where expected. These changes may require out-of-tree drivers
196 different transport - netlink(4) socket instead of unix(4). Users of
226 to install the FreeBSD-firmware-iwm package.
237 comms/rtlbt-firmware port.
253 The build now defaults to WITHOUT_CLEAN - i.e., no automatic clean
259 freebsd-current mailing list so that a special-case dependency can be
267 uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
282 package FreeBSD-audit. If you use OpenBSM auditing and pkgbase, you
283 should install FreeBSD-audit.
286 cron, lpr, and ntpd have been moved from FreeBSD-utilities into their
288 packages: FreeBSD-cron, FreeBSD-lp, or FreeBSD-ntp.
291 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
292 been upgraded to 18.1.6. It is important that you run `make delete-old`
328 non-compliant MTAs; please see the first 8.18.1 release note in
362 box, bsddialog(1) is not considered as a drop-in replacement for
385 Move standard include files to the clibs-dev package and move clang
386 internal libraries and headers to clang and clang-dev. Upgrading systems
390 pkg upgrade -y FreeBSD-utilities
391 pkg upgrade -y FreeBSD-utilities-dev
392 pkg upgrade -y
405 FreeBSD 15.0-CURRENT.
420 Following the general removal of MIPS support, the ath(4) AHB bus-
428 Out-of-tree kernel modules will need to be rebuilt.
448 the base system. It is important to rebuild third-party software
477 all non-x86 platforms for some time now. If you need to fall back,
488 Add jobs.mk to save typing. Enables -j${JOB_MAX} and logging
490 make buildworld-jobs
492 make -j${JOB_MAX} buildworld > ../buildworld.log 2>&1
529 LinuxKPI pci.h changes may require out-of-tree drivers to be recompiled.
533 llvm-objump is now always installed as objdump. Previously there was
553 needs to use devctl to re-enable the device, and reprobe it (or set
559 pf no longer accepts 'scrub fragment crop' or 'scrub fragment drop-ovl'.
571 pkg install FreeBSD-dhclient FreeBSD-geom FreeBSD-resolvconf \
572 FreeBSD-devd FreeBSD-devmatch
584 LinuxKPI pm.h changes require an update to the latest drm-kmod version
585 before re-compiling to avoid errors.
612 Unbound support for RFC8375: The special-use domain 'home.arpa' is
613 by default blocked. To unblock it use a local-zone nodefault
615 local-zone: "home.arpa." nodefault
617 Or use another type of local-zone to override with your choice.
658 # chsh -s csh
676 audio/freebsd-13-mixer
689 application-specific configuration option for applications
721 % sudo -E make install
730 awk has been updated to the latest one-true-awk version 20210215.
764 https://lists.freebsd.org/archives/freebsd-current/2021-June/000153.html
767 git update-ref -d refs/remotes/freebsd/vendor/openzfs
772 which break drm-kmod. In addition various other additions where
780 pkg install -f FreeBSD-openssl
790 delegations by setting vfs.nfsd.issue_delegations non-zero
799 needing a working back channel for server->client RPCs.
808 For 64-bit architectures the base system is now built with Position
814 Please update your drm-kmod port to after the __FreeBSD_version 1400003
827 Transport-independent parts of HID support have been split off the USB
840 https://github.com/bsdimp/freebsd-git-docs/blob/main/src-cvt.md
850 Obsolete in-tree GDB 6.1.1 has been removed. GDB (including kgdb)
854 ping6 has been merged into ping. It can now be called as "ping -6".
859 If you have multi-fib configuration and rely on existence of all
863 The internal pre-processor in the calendar(1) program has been
864 extended to support more C pre-processor commands (e.g. #ifdef, #else,
871 have been moved to the deskutils/calendar-data port, much like the
873 make delete-old-files, you need to install it to retain full
880 find sys -name LINT\* -delete
884 command you want to un-auger the tree is
886 svn revert -R .
904 to an explicit "zpool import -a" in one of the rc scripts enabled by
905 zfs_enable=YES. This means your non-root zpools won't auto import until
921 As such, all the NFS modules must be re-compiled from sources.
924 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
943 accepted. An exp-run has identified all of the problems with this in
944 ports, but other non-ports software may need extra escapes removed to
948 from rtld: Undefined symbol "regcomp@FBSD_1.6" -- It is imperative that
954 implementation corrects non-conformant behavior of the previous bc
972 re-enable it for system root only on non-ZFS filesystems with the
976 It may be advised to setup aliases for grep to default to `-d skip` if
977 commonly non-recursively grepping a list that includes directories and
983 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
996 a slightly older -CURRENT userland and older FreeBSD userlands may not
1008 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
1016 amd is still available in the sysutils/am-utils port.
1022 The WITH_GPL_DTC option has been removed. The BSD-licenced device tree
1037 ncurses has been updated to a newer version (6.2-20200215). Given the ABI
1060 Architectures not supported by in-tree Clang/LLVM require an
1067 short-term transition aid they may be enabled via WITH_* options.
1068 GCC 4.2.1 is expected to be removed from the tree on 2020-03-31.
1073 You must now use a MACHINE_ARCH of armv6 or armv7. The default
1074 MACHINE_ARCH for MACHINE=arm is now armv7.
1083 Kernel-loadable random(4) modules are no longer unloadable.
1086 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
1140 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
1159 with ping. If you use any of -ARWXaghmrtwx, you must update your
1164 and the "-o sync_unmount" and "-o init_backgrounded" mount options have
1172 a non-default value, please tell asomers@FreeBSD.org why.
1178 world-readable. If the /var/account directory must be created by
1190 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
1201 User-wired pages now have their own counter,
1204 long. bhyve VMs wired with the -S are now subject to the user
1226 non-zero to bypass the random device prior to seeding, or zero to
1228 For now, set to 1 (unsafe) by default to restore pre-r346250 boot
1232 read-only diagnostic sysctl that is set when bypass is enabled and
1240 non-zero to disable warnings in dmesg when the same conditions are
1253 r338192 (Aug. 22, 2018) will not work unless the "-use-udpsock"
1255 nfsuserd daemons built from head sources that are post-r338192 are
1265 Clang, llvm, lld, lldb, compiler-rt and libc++ have been upgraded to
1295 the -b (bootnum) parameter for commands where the bootnum was previously
1296 specified with each option. For example 'efibootmgr -B 0001' is now
1297 'efibootmgr -B -b 0001'.
1308 The XLP config has been removed. We can't support 64-bit atomics in this
1309 kernel because it is running in 32-bit mode. XLP users must transition
1310 to running a 64-bit kernel (XLP64 or XLPN32).
1319 Clang, llvm, lld, lldb, compiler-rt and libc++ have been upgraded to
1329 On amd64, arm64 and armv7 (architectures that install LLVM's ld.lld
1337 by building a world with -DWITHOUT_BSD_CRTBEGIN.
1342 FreeBSD-13. It is available as a package (ctm) for all supported
1353 $ newsyslog -Nrv
1360 just install the drm-kmod port. All others should install
1361 drm-legacy-kmod.
1364 drm-kmod. For hardware older than 2013, however, some users will need
1365 to use drm-legacy-kmod if drm-kmod doesn't work for them. Hardware older
1366 than 2008 usually only works in drm-legacy-kmod. The graphics team can
1369 have hardware supported by drm-kmod, you are strongly encouraged to use
1372 Other than KPI chasing, drm-legacy-kmod will not be updated. As outlined
1377 Generally, anybody using the drm*-kmod packages should add
1379 cross-threading surprises, especially with automatic driver
1380 loading from X11 startup. These will become the defaults in 13-current
1393 important to rebuild third-party software after upgrading. The value
1421 default since FreeBSD-11.
1437 bhyve uses userboot.so. It remains 4th-only until some issues are solved
1445 environment, or using `ls --color=never`. The ls(1) specific CLICOLOR
1450 restore the old behavior, set PAGER="more" and MANPAGER="more -s" in
1495 u-boot will expose as an EFI frame buffer.
1500 existing systems. Do not skip the "mergemaster -Fp" step before
1506 still be run as non-root by setting ntpd_user=ntpd in rc.conf, after
1522 netstat has been broken to allow 32-bit binaries to work on
1523 64-bit kernels without modification. These programs will need
1526 structures from pointers to 64-bit virtual addresses.
1542 Clang, llvm, lld, lldb, compiler-rt and libc++ have been upgraded to
1569 The on-disk format for hwpmc callchain records has changed to include
1593 The nxge(4) driver has been removed. This driver was for PCI-X 10g
1642 When using syslog-ng, add the 'syslog-protocol' flag to local
1646 unix-dgram("/var/run/log" flags(syslog-protocol));
1683 FreeBSD boot loader enhanced with Lua scripting. It's purely opt-in for
1685 Co-existence for the transition period will come shortly. Booting is a
1686 complex environment and test coverage for Lua-enabled loaders has been
1697 Clang, llvm, lld, lldb, compiler-rt and libc++ have been upgraded to
1712 into apm. It was a no-op on ACPI in current for a while now (but was
1721 This can be re-enabled by setting the following in loader.conf:
1726 hardclock-based software watchdog if no hardware watchdog is
1754 The naive and non-compliant support of posix_fallocate(2) in ZFS
1765 /etc/src-env.conf (not /etc/src.conf), or passing the option in the
1770 builds, and /usr/obj/<arch>/<srcdir> for cross-builds, to a unified
1772 format by setting WITHOUT_UNIFIED_OBJDIR=yes in /etc/src-env.conf,
1773 the environment, or with -DWITHOUT_UNIFIED_OBJDIR when building.
1776 tools by looking up the OBJDIR used by 'make -V .OBJDIR' means rather
1780 The native-xtools target no longer installs the files by default to the
1781 OBJDIR. Use the native-xtools-install target with a DESTDIR to install
1782 to ${DESTDIR}/${NXTP} where NXTP defaults to /nxb-bin.
1795 The arm port has split armv6 into armv6 and armv7. armv7 is now
1796 a valid TARGET_ARCH/MACHINE_ARCH setting. If you have an armv7 system
1798 MACHINE_ARCH=armv7 to 'make buildworld' to do a native build.
1801 When building multiple kernels using KERNCONF, non-existent KERNCONF
1815 For 32-bit arm compiled for hard-float support, soft-floating point
1818 /usr/libsoft also existed). Only users with a hard-float ld.so, but
1819 soft-float everything else should be affected.
1836 - The "beforecheck" and "aftercheck" targets are now specified.
1837 - ${CHECKDIR} (added in commit noted above) has been removed.
1838 - Legacy behavior can be enabled by setting
1847 The end-user should set "WITH_INSTALL_AS_USER" in src.conf(5) or the
1860 foreground mode (i.e., do not use the -p or -y options). As it
1872 Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 5.0.0.
1878 r-commands (rlogin, rsh, etc.) to be built with the base system.
1881 The FreeBSD/powerpc platform now uses a 64-bit type for time_t. This is
1887 of 32-bit compatibility. All 32-bit binaries will be affected.
1892 fashion. This prevents many of the common foot-shooting actions in the
1904 fashion. This prevents many of the common foot-shooting actions in the
1926 via pkg install heirloom-doctools.
1949 bus bind type - this is where probe/attach is done.
1954 The "ino64" 64-bit inode project has been committed, which extends
1962 For the safest in-place upgrade begin by removing previous build
1963 artifacts via "rm -rf /usr/obj/*". Then, carefully follow the full
1974 migration before the end-of-life date for FreeBSD 11.
1992 instead of requiring that the aarch64-binutils port or package be
1993 installed. To continue using aarch64-binutils, set
1994 CROSS_BINUTILS_PREFIX=/usr/local/aarch64-freebsd/bin .
2012 - `cfiscsi_load="YES"` in loader.conf(5).
2013 - Add `cfiscsi` to `$kld_list` in rc.conf(5).
2014 - ctladm(8)/ctld(8), when compiled with iSCSI support
2038 Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 4.0.0.
2066 but you use igb(4), you need to re-add em(4) to your custom
2070 Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 3.9.1.
2075 Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 3.9.0.
2086 chromebook_platform(4), to work properly on Chromebook-class hardware.
2092 rtwn(4) main module + rtwn_usb(4) and rtwn_pci(4) bus-specific
2095 conflict (rtwnrtl8192cU(B) -> rtwnrtl8192cE(B))
2099 - rcs: Latest GPLv3 GNU rcs version.
2100 - rcs57: Copy of the latest version of GNU rcs (GPLv2) before it was
2115 to avoid a name clash with shared libraries on case-insensitive file
2122 - rcs: Latest GPLv3 GNU rcs version.
2123 - rcs57: Copy of the latest version of GNU rcs (GPLv2) from base.
2144 standards-conforming UDP application. The new behaviour can be
2155 After branch N is created, entries older than the N-2 branch point are removed
2163 -------------
2168 commands with 'env -i '. See the env(1) manual page for more details.
2169 Occasionally a build failure will occur with "make -j" due to a race
2170 condition. If this happens try building again without -j, and please
2175 do an upgrade to the new branch. This is the best-tested upgrade path,
2186 major release at a time, including running `make delete-old` at each
2202 ---------
2213 block on the freebsd-boot partition of a GPT partitioned drive ada0:
2214 gpart bootcode -p /boot/gptzfsboot -i $N ada0
2221 Non-boot pools do not need these updates.
2224 ---------
2248 -----------------
2251 failsafe as it uses a /usr/obj tree with a fresh mini-buildworld,
2253 make kernel-toolchain
2254 make -DALWAYS_CHECK_MAKE buildkernel KERNCONF=YOUR_KERNEL_HERE
2255 make -DALWAYS_CHECK_MAKE installkernel KERNCONF=YOUR_KERNEL_HERE
2260 ---------------------
2265 nextboot -k testkernel
2268 -----------------------------------------------------------
2278 etcupdate -p [5]
2280 etcupdate -B [4]
2281 make delete-old [6]
2284 To cross-install current onto a separate partition
2285 --------------------------------------------------
2292 <boot into -stable>
2297 make installworld DESTDIR=${CURRENT_ROOT} -DDB_FROM_SRC
2308 To upgrade in-place from stable to current
2309 ----------------------------------------------
2316 etcupdate -p [5]
2318 etcupdate -B [4]
2319 make delete-old [6]
2328 Also, if you are tracking -current, you must be subscribed to
2329 freebsd-current@freebsd.org. Make sure that before you update
2331 messages there. If in doubt, please track -stable which has
2336 [1] If you have third party modules, such as drm-kmod or vmware, you
2339 your system and install them as well. If you are running -current, you
2345 PORTS_MODULES+=graphics/drm-kmod graphics/nvidia-drm-kmod
2352 [3] From the bootblocks, boot -s, and then do
2353 fsck -p
2354 mount -u /
2355 mount -a
2358 adjkerntz -i # if CMOS is wall time
2362 [4] Note: This step is non-optional. Failure to do this step
2366 as the archives of freebsd-current and freebsd-hackers mailing lists
2369 [5] Usually this step is a no-op. However, from time to time
2374 can be deleted by "make delete-old-libs", but you have to make
2401 breakages in tracking -current. It is not guaranteed to be a complete
2408 Copyright 1998-2009 M. Warner Losh <imp@FreeBSD.org>