Lines Matching +full:mini +full:- +full:cards
1 Updating Information for users of FreeBSD-CURRENT.
9 https://docs.freebsd.org/en/books/handbook/cutting-edge/#makeworld
22 includes various WITNESS- related kernel options, INVARIANTS, malloc
28 at runtime, run "ln -s 'abort:false,junk:false' /etc/malloc.conf".)
33 install FreeBSD-bsdconfig.
47 package, FreeBSD-bmake. If you use pkgbase and you need make, you
54 gssd(8) has been moved to a new package, FreeBSD-gssd. If you use
59 have been renamed from FreeBSD-krb5* to FreeBSD-kerberos*. This
64 In either case, if you have FreeBSD-krb5* packages installed, you
65 should remove them and (re)install the equivalent FreeBSD-kerberos*
81 sysutils/freebsd-shar port was created to maintain this version of
85 LinuxKPI device.h and acpi changes effecting drivers and drm-kmod.
92 All NFS related modules must be rebuilt from up-to-date
96 "make delete-old" will now remove the Forth bootloader entirely
100 MIT KRB5 (MIT Kerberos5) has been imported into 15-CURRENT. To
103 1.5.2 when delete-old and delete-old-libs are run. To revert back
104 simply buildworld/installworld again with delete-old-libs and
105 delete-old.
109 The few affected ports must be rebuilt. A successful exp-run will be
117 LinuxKPI dma-mapping.h were pulled into the tree from drm-kmod.
126 pf now blocks IPv6 packets with a hop-by-hop or destination options header by
127 default. Such packets can be passed by adding "allow-opts" to the rule. IPv6
132 has moved to the new FreeBSD-ctl package. If you use pkgbase and you
135 Development-related tools (e.g. ar and nm) have moved to the new
136 "FreeBSD-toolchain" package, which subsumes and obsoletes the
137 existing "FreeBSD-elftoolchain" package. If you use pkgbase and
139 ensure the old FreeBSD-elftoolchain* packages are completely removed.
144 however it does not have any in-tree consumers since the introduction
159 UMASS quirks and auto-quirk probing has been overhauled. CAM now won't
162 in 14 and broke several e-readers and the like). Please send imp@freebsd.org
171 memory where expected. These changes may require out-of-tree drivers
201 different transport - netlink(4) socket instead of unix(4). Users of
231 to install the FreeBSD-firmware-iwm package.
242 comms/rtlbt-firmware port.
258 The build now defaults to WITHOUT_CLEAN - i.e., no automatic clean
264 freebsd-current mailing list so that a special-case dependency can be
272 uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
287 package FreeBSD-audit. If you use OpenBSM auditing and pkgbase, you
288 should install FreeBSD-audit.
291 cron, lpr, and ntpd have been moved from FreeBSD-utilities into their
293 packages: FreeBSD-cron, FreeBSD-lp, or FreeBSD-ntp.
296 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
297 been upgraded to 18.1.6. It is important that you run `make delete-old`
333 non-compliant MTAs; please see the first 8.18.1 release note in
367 box, bsddialog(1) is not considered as a drop-in replacement for
390 Move standard include files to the clibs-dev package and move clang
391 internal libraries and headers to clang and clang-dev. Upgrading systems
395 pkg upgrade -y FreeBSD-utilities
396 pkg upgrade -y FreeBSD-utilities-dev
397 pkg upgrade -y
410 FreeBSD 15.0-CURRENT.
425 Following the general removal of MIPS support, the ath(4) AHB bus-
433 Out-of-tree kernel modules will need to be rebuilt.
453 the base system. It is important to rebuild third-party software
482 all non-x86 platforms for some time now. If you need to fall back,
493 Add jobs.mk to save typing. Enables -j${JOB_MAX} and logging
495 make buildworld-jobs
497 make -j${JOB_MAX} buildworld > ../buildworld.log 2>&1
534 LinuxKPI pci.h changes may require out-of-tree drivers to be recompiled.
538 llvm-objump is now always installed as objdump. Previously there was
558 needs to use devctl to re-enable the device, and reprobe it (or set
564 pf no longer accepts 'scrub fragment crop' or 'scrub fragment drop-ovl'.
576 pkg install FreeBSD-dhclient FreeBSD-geom FreeBSD-resolvconf \
577 FreeBSD-devd FreeBSD-devmatch
589 LinuxKPI pm.h changes require an update to the latest drm-kmod version
590 before re-compiling to avoid errors.
617 Unbound support for RFC8375: The special-use domain 'home.arpa' is
618 by default blocked. To unblock it use a local-zone nodefault
620 local-zone: "home.arpa." nodefault
622 Or use another type of local-zone to override with your choice.
663 # chsh -s csh
681 audio/freebsd-13-mixer
694 application-specific configuration option for applications
726 % sudo -E make install
735 awk has been updated to the latest one-true-awk version 20210215.
769 https://lists.freebsd.org/archives/freebsd-current/2021-June/000153.html
772 git update-ref -d refs/remotes/freebsd/vendor/openzfs
777 which break drm-kmod. In addition various other additions where
785 pkg install -f FreeBSD-openssl
795 delegations by setting vfs.nfsd.issue_delegations non-zero
804 needing a working back channel for server->client RPCs.
813 For 64-bit architectures the base system is now built with Position
819 Please update your drm-kmod port to after the __FreeBSD_version 1400003
832 Transport-independent parts of HID support have been split off the USB
845 https://github.com/bsdimp/freebsd-git-docs/blob/main/src-cvt.md
855 Obsolete in-tree GDB 6.1.1 has been removed. GDB (including kgdb)
859 ping6 has been merged into ping. It can now be called as "ping -6".
864 If you have multi-fib configuration and rely on existence of all
868 The internal pre-processor in the calendar(1) program has been
869 extended to support more C pre-processor commands (e.g. #ifdef, #else,
876 have been moved to the deskutils/calendar-data port, much like the
878 make delete-old-files, you need to install it to retain full
885 find sys -name LINT\* -delete
889 command you want to un-auger the tree is
891 svn revert -R .
909 to an explicit "zpool import -a" in one of the rc scripts enabled by
910 zfs_enable=YES. This means your non-root zpools won't auto import until
926 As such, all the NFS modules must be re-compiled from sources.
929 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
948 accepted. An exp-run has identified all of the problems with this in
949 ports, but other non-ports software may need extra escapes removed to
953 from rtld: Undefined symbol "regcomp@FBSD_1.6" -- It is imperative that
959 implementation corrects non-conformant behavior of the previous bc
977 re-enable it for system root only on non-ZFS filesystems with the
981 It may be advised to setup aliases for grep to default to `-d skip` if
982 commonly non-recursively grepping a list that includes directories and
988 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
1001 a slightly older -CURRENT userland and older FreeBSD userlands may not
1013 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
1021 amd is still available in the sysutils/am-utils port.
1027 The WITH_GPL_DTC option has been removed. The BSD-licenced device tree
1042 ncurses has been updated to a newer version (6.2-20200215). Given the ABI
1065 Architectures not supported by in-tree Clang/LLVM require an
1072 short-term transition aid they may be enabled via WITH_* options.
1073 GCC 4.2.1 is expected to be removed from the tree on 2020-03-31.
1088 Kernel-loadable random(4) modules are no longer unloadable.
1091 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
1145 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
1164 with ping. If you use any of -ARWXaghmrtwx, you must update your
1169 and the "-o sync_unmount" and "-o init_backgrounded" mount options have
1177 a non-default value, please tell asomers@FreeBSD.org why.
1183 world-readable. If the /var/account directory must be created by
1195 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
1206 User-wired pages now have their own counter,
1209 long. bhyve VMs wired with the -S are now subject to the user
1231 non-zero to bypass the random device prior to seeding, or zero to
1233 For now, set to 1 (unsafe) by default to restore pre-r346250 boot
1237 read-only diagnostic sysctl that is set when bypass is enabled and
1245 non-zero to disable warnings in dmesg when the same conditions are
1258 r338192 (Aug. 22, 2018) will not work unless the "-use-udpsock"
1260 nfsuserd daemons built from head sources that are post-r338192 are
1270 Clang, llvm, lld, lldb, compiler-rt and libc++ have been upgraded to
1300 the -b (bootnum) parameter for commands where the bootnum was previously
1301 specified with each option. For example 'efibootmgr -B 0001' is now
1302 'efibootmgr -B -b 0001'.
1313 The XLP config has been removed. We can't support 64-bit atomics in this
1314 kernel because it is running in 32-bit mode. XLP users must transition
1315 to running a 64-bit kernel (XLP64 or XLPN32).
1324 Clang, llvm, lld, lldb, compiler-rt and libc++ have been upgraded to
1342 by building a world with -DWITHOUT_BSD_CRTBEGIN.
1347 FreeBSD-13. It is available as a package (ctm) for all supported
1358 $ newsyslog -Nrv
1365 just install the drm-kmod port. All others should install
1366 drm-legacy-kmod.
1369 drm-kmod. For hardware older than 2013, however, some users will need
1370 to use drm-legacy-kmod if drm-kmod doesn't work for them. Hardware older
1371 than 2008 usually only works in drm-legacy-kmod. The graphics team can
1373 market and difficulty to test all the older cards effectively. If you
1374 have hardware supported by drm-kmod, you are strongly encouraged to use
1377 Other than KPI chasing, drm-legacy-kmod will not be updated. As outlined
1382 Generally, anybody using the drm*-kmod packages should add
1384 cross-threading surprises, especially with automatic driver
1385 loading from X11 startup. These will become the defaults in 13-current
1398 important to rebuild third-party software after upgrading. The value
1426 default since FreeBSD-11.
1442 bhyve uses userboot.so. It remains 4th-only until some issues are solved
1450 environment, or using `ls --color=never`. The ls(1) specific CLICOLOR
1455 restore the old behavior, set PAGER="more" and MANPAGER="more -s" in
1500 u-boot will expose as an EFI frame buffer.
1505 existing systems. Do not skip the "mergemaster -Fp" step before
1511 still be run as non-root by setting ntpd_user=ntpd in rc.conf, after
1527 netstat has been broken to allow 32-bit binaries to work on
1528 64-bit kernels without modification. These programs will need
1531 structures from pointers to 64-bit virtual addresses.
1547 Clang, llvm, lld, lldb, compiler-rt and libc++ have been upgraded to
1574 The on-disk format for hwpmc callchain records has changed to include
1598 The nxge(4) driver has been removed. This driver was for PCI-X 10g
1599 cards made by s2io/Neterion. The company was acquired by Exar and
1647 When using syslog-ng, add the 'syslog-protocol' flag to local
1651 unix-dgram("/var/run/log" flags(syslog-protocol));
1688 FreeBSD boot loader enhanced with Lua scripting. It's purely opt-in for
1690 Co-existence for the transition period will come shortly. Booting is a
1691 complex environment and test coverage for Lua-enabled loaders has been
1702 Clang, llvm, lld, lldb, compiler-rt and libc++ have been upgraded to
1717 into apm. It was a no-op on ACPI in current for a while now (but was
1726 This can be re-enabled by setting the following in loader.conf:
1731 hardclock-based software watchdog if no hardware watchdog is
1759 The naive and non-compliant support of posix_fallocate(2) in ZFS
1770 /etc/src-env.conf (not /etc/src.conf), or passing the option in the
1775 builds, and /usr/obj/<arch>/<srcdir> for cross-builds, to a unified
1777 format by setting WITHOUT_UNIFIED_OBJDIR=yes in /etc/src-env.conf,
1778 the environment, or with -DWITHOUT_UNIFIED_OBJDIR when building.
1781 tools by looking up the OBJDIR used by 'make -V .OBJDIR' means rather
1785 The native-xtools target no longer installs the files by default to the
1786 OBJDIR. Use the native-xtools-install target with a DESTDIR to install
1787 to ${DESTDIR}/${NXTP} where NXTP defaults to /nxb-bin.
1806 When building multiple kernels using KERNCONF, non-existent KERNCONF
1820 For 32-bit arm compiled for hard-float support, soft-floating point
1823 /usr/libsoft also existed). Only users with a hard-float ld.so, but
1824 soft-float everything else should be affected.
1841 - The "beforecheck" and "aftercheck" targets are now specified.
1842 - ${CHECKDIR} (added in commit noted above) has been removed.
1843 - Legacy behavior can be enabled by setting
1852 The end-user should set "WITH_INSTALL_AS_USER" in src.conf(5) or the
1865 foreground mode (i.e., do not use the -p or -y options). As it
1877 Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 5.0.0.
1883 r-commands (rlogin, rsh, etc.) to be built with the base system.
1886 The FreeBSD/powerpc platform now uses a 64-bit type for time_t. This is
1892 of 32-bit compatibility. All 32-bit binaries will be affected.
1897 fashion. This prevents many of the common foot-shooting actions in the
1909 fashion. This prevents many of the common foot-shooting actions in the
1931 via pkg install heirloom-doctools.
1954 bus bind type - this is where probe/attach is done.
1959 The "ino64" 64-bit inode project has been committed, which extends
1967 For the safest in-place upgrade begin by removing previous build
1968 artifacts via "rm -rf /usr/obj/*". Then, carefully follow the full
1979 migration before the end-of-life date for FreeBSD 11.
1997 instead of requiring that the aarch64-binutils port or package be
1998 installed. To continue using aarch64-binutils, set
1999 CROSS_BINUTILS_PREFIX=/usr/local/aarch64-freebsd/bin .
2017 - `cfiscsi_load="YES"` in loader.conf(5).
2018 - Add `cfiscsi` to `$kld_list` in rc.conf(5).
2019 - ctladm(8)/ctld(8), when compiled with iSCSI support
2043 Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 4.0.0.
2071 but you use igb(4), you need to re-add em(4) to your custom
2075 Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 3.9.1.
2080 Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 3.9.0.
2091 chromebook_platform(4), to work properly on Chromebook-class hardware.
2097 rtwn(4) main module + rtwn_usb(4) and rtwn_pci(4) bus-specific
2100 conflict (rtwnrtl8192cU(B) -> rtwnrtl8192cE(B))
2104 - rcs: Latest GPLv3 GNU rcs version.
2105 - rcs57: Copy of the latest version of GNU rcs (GPLv2) before it was
2120 to avoid a name clash with shared libraries on case-insensitive file
2127 - rcs: Latest GPLv3 GNU rcs version.
2128 - rcs57: Copy of the latest version of GNU rcs (GPLv2) from base.
2149 standards-conforming UDP application. The new behaviour can be
2160 After branch N is created, entries older than the N-2 branch point are removed
2168 -------------
2173 commands with 'env -i '. See the env(1) manual page for more details.
2174 Occasionally a build failure will occur with "make -j" due to a race
2175 condition. If this happens try building again without -j, and please
2180 do an upgrade to the new branch. This is the best-tested upgrade path,
2191 major release at a time, including running `make delete-old` at each
2207 ---------
2218 block on the freebsd-boot partition of a GPT partitioned drive ada0:
2219 gpart bootcode -p /boot/gptzfsboot -i $N ada0
2226 Non-boot pools do not need these updates.
2229 ---------
2253 -----------------
2256 failsafe as it uses a /usr/obj tree with a fresh mini-buildworld,
2258 make kernel-toolchain
2259 make -DALWAYS_CHECK_MAKE buildkernel KERNCONF=YOUR_KERNEL_HERE
2260 make -DALWAYS_CHECK_MAKE installkernel KERNCONF=YOUR_KERNEL_HERE
2265 ---------------------
2270 nextboot -k testkernel
2273 -----------------------------------------------------------
2283 etcupdate -p [5]
2285 etcupdate -B [4]
2286 make delete-old [6]
2289 To cross-install current onto a separate partition
2290 --------------------------------------------------
2297 <boot into -stable>
2302 make installworld DESTDIR=${CURRENT_ROOT} -DDB_FROM_SRC
2313 To upgrade in-place from stable to current
2314 ----------------------------------------------
2321 etcupdate -p [5]
2323 etcupdate -B [4]
2324 make delete-old [6]
2333 Also, if you are tracking -current, you must be subscribed to
2334 freebsd-current@freebsd.org. Make sure that before you update
2336 messages there. If in doubt, please track -stable which has
2341 [1] If you have third party modules, such as drm-kmod or vmware, you
2344 your system and install them as well. If you are running -current, you
2350 PORTS_MODULES+=graphics/drm-kmod graphics/nvidia-drm-kmod
2357 [3] From the bootblocks, boot -s, and then do
2358 fsck -p
2359 mount -u /
2360 mount -a
2363 adjkerntz -i # if CMOS is wall time
2367 [4] Note: This step is non-optional. Failure to do this step
2371 as the archives of freebsd-current and freebsd-hackers mailing lists
2374 [5] Usually this step is a no-op. However, from time to time
2379 can be deleted by "make delete-old-libs", but you have to make
2406 breakages in tracking -current. It is not guaranteed to be a complete
2413 Copyright 1998-2009 M. Warner Losh <imp@FreeBSD.org>