Lines Matching +full:boot +full:- +full:page +full:- +full:step
1 Updating Information for users of FreeBSD-CURRENT.
9 https://docs.freebsd.org/en/books/handbook/cutting-edge/#makeworld
22 includes various WITNESS- related kernel options, INVARIANTS, malloc
28 at runtime, run "ln -s 'abort:false,junk:false' /etc/malloc.conf".)
32 "pam" package. The pam-lib subpackage, which includes libpam, will
35 If you have set-minimal(-jail) installed, the pam base package which
37 If you don't, you MUST manually install the FreeBSD-pam package if you
43 pf(4) now supports nat64 via the af-to keyword.
51 flua(1) has moved to the new FreeBSD-flua package. If you use flua,
73 The "FreeBSD-unbound" package is renamed to "FreeBSD-local-unbound".
74 If you have set-optional or set-base installed, the new package will
87 Audio-related utilities including mixer(8) and virtual_oss(8) have
88 moved to the new FreeBSD-sound package. If you have set-optional or
89 set-base installed this package will be installed automatically,
93 Both drm-kmod and nividia-drm ports had to be updated to either no
101 can install the ftp/freebsd-ftpd port. pkgbase users should remove
102 the orphaned FreeBSD-ftpd package.
107 powerd has been moved to a new FreeBSD-powerd package. If you have
108 FreeBSD-set-minimal installed, the new package will be installed
112 FreeBSD-pmc package. If you use these, you may want to install the
116 been moved to the new package. If you have set-minimal installed,
124 FreeBSD-mandoc. If you have the minimal set installed, this package
127 Kyua has been moved to the FreeBSD-kyua package, and ATF has been moved
128 to the FreeBSD-atf* packages. If you have FreeBSD-tests installed,
141 will no longer generate "-man" subpackages; instead the manpages will
146 FreeBSD 16.0-CURRENT.
154 changed: "FreeBSD" is now "FreeBSD-ports", and "FreeBSD-kmods" is now
155 "FreeBSD-ports-kmods". Users with /usr/local/etc/pkg/repos files
163 'pkg install -r base -g FreeBSD-openssl\* FreeBSD-kerberos\*'
171 if you require bridge for network access during boot, in which case
177 a no-op for MIT Kerberos, so this only affects builds which set
191 The CLEAN option has been switched back from default-on to default-off.
200 FreeBSD-libmilter* packages.
202 If you only have FreeBSD-sendmail installed for applications that
216 has been reverted. (However, it is still non-functional.)
238 The CLEAN option has been switched back from default-off to
239 default-on. This reverts the 20240729 change below.
242 routed(8) and route6d(8) have moved to the FreeBSD-rip package.
254 install FreeBSD-bsdconfig.
268 package, FreeBSD-bmake. If you use pkgbase and you need make, you
275 gssd(8) has been moved to a new package, FreeBSD-gssd. If you use
280 have been renamed from FreeBSD-krb5* to FreeBSD-kerberos*. This
285 In either case, if you have FreeBSD-krb5* packages installed, you
286 should remove them and (re)install the equivalent FreeBSD-kerberos*
302 sysutils/freebsd-shar port was created to maintain this version of
306 LinuxKPI device.h and acpi changes effecting drivers and drm-kmod.
313 All NFS related modules must be rebuilt from up-to-date
317 "make delete-old" will now remove the Forth bootloader entirely
321 MIT KRB5 (MIT Kerberos5) has been imported into 15-CURRENT. To
324 1.5.2 when delete-old and delete-old-libs are run. To revert back
325 simply buildworld/installworld again with delete-old-libs and
326 delete-old.
330 The few affected ports must be rebuilt. A successful exp-run will be
338 LinuxKPI dma-mapping.h were pulled into the tree from drm-kmod.
347 pf now blocks IPv6 packets with a hop-by-hop or destination options header by
348 default. Such packets can be passed by adding "allow-opts" to the rule. IPv6
353 has moved to the new FreeBSD-ctl package. If you use pkgbase and you
356 Development-related tools (e.g. ar and nm) have moved to the new
357 "FreeBSD-toolchain" package, which subsumes and obsoletes the
358 existing "FreeBSD-elftoolchain" package. If you use pkgbase and
360 ensure the old FreeBSD-elftoolchain* packages are completely removed.
365 however it does not have any in-tree consumers since the introduction
380 UMASS quirks and auto-quirk probing has been overhauled. CAM now won't
381 send SYNCHRONIZE CACHE unless MODE PAGE 8 is present and valid. This
383 in 14 and broke several e-readers and the like). Please send imp@freebsd.org
392 memory where expected. These changes may require out-of-tree drivers
422 different transport - netlink(4) socket instead of unix(4). Users of
452 to install the FreeBSD-firmware-iwm package.
463 comms/rtlbt-firmware port.
479 The build now defaults to WITHOUT_CLEAN - i.e., no automatic clean
485 freebsd-current mailing list so that a special-case dependency can be
493 uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
508 package FreeBSD-audit. If you use OpenBSM auditing and pkgbase, you
509 should install FreeBSD-audit.
512 cron, lpr, and ntpd have been moved from FreeBSD-utilities into their
514 packages: FreeBSD-cron, FreeBSD-lp, or FreeBSD-ntp.
517 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
518 been upgraded to 18.1.6. It is important that you run `make delete-old`
531 Files listed here are the last ones read. And /boot/loader.conf.local was
538 /boot/defaults/loader.conf
541 /boot/device.hints
542 /boot/loader.conf
545 /boot/loader.conf.d/*.conf
548 /boot/loader.conf.local
554 non-compliant MTAs; please see the first 8.18.1 release note in
588 box, bsddialog(1) is not considered as a drop-in replacement for
611 Move standard include files to the clibs-dev package and move clang
612 internal libraries and headers to clang and clang-dev. Upgrading systems
616 pkg upgrade -y FreeBSD-utilities
617 pkg upgrade -y FreeBSD-utilities-dev
618 pkg upgrade -y
622 belongs to VNETs can be initialized during early boot or module
631 FreeBSD 15.0-CURRENT.
634 Serial communication (in boot loaders, kernel, and userland) has
641 set BOOT_COMCONSOLE_SPEED=9600 to use 9600 for all of the boot
646 Following the general removal of MIPS support, the ath(4) AHB bus-
649 no longer a need for if_ath_pci_load="YES" in /boot/loader.conf or
654 Out-of-tree kernel modules will need to be rebuilt.
674 the base system. It is important to rebuild third-party software
703 all non-x86 platforms for some time now. If you need to fall back,
714 Add jobs.mk to save typing. Enables -j${JOB_MAX} and logging
716 make buildworld-jobs
718 make -j${JOB_MAX} buildworld > ../buildworld.log 2>&1
755 LinuxKPI pci.h changes may require out-of-tree drivers to be recompiled.
759 llvm-objdump is now always installed as objdump. Previously there was
768 to re-enable sendmail(8):
779 needs to use devctl to re-enable the device, and reprobe it (or set
785 pf no longer accepts 'scrub fragment crop' or 'scrub fragment drop-ovl'.
797 pkg install FreeBSD-dhclient FreeBSD-geom FreeBSD-resolvconf \
798 FreeBSD-devd FreeBSD-devmatch
810 LinuxKPI pm.h changes require an update to the latest drm-kmod version
811 before re-compiling to avoid errors.
838 Unbound support for RFC8375: The special-use domain 'home.arpa' is
839 by default blocked. To unblock it use a local-zone nodefault
841 local-zone: "home.arpa." nodefault
843 Or use another type of local-zone to override with your choice.
884 # chsh -s csh
900 new syntax. Please refer to the mixer(8) manual page for more
902 audio/freebsd-13-mixer
915 application-specific configuration option for applications
947 % sudo -E make install
956 awk has been updated to the latest one-true-awk version 20210215.
990 https://lists.freebsd.org/archives/freebsd-current/2021-June/000153.html
993 git update-ref -d refs/remotes/freebsd/vendor/openzfs
998 which break drm-kmod. In addition various other additions where
1006 pkg install -f FreeBSD-openssl
1016 delegations by setting vfs.nfsd.issue_delegations non-zero
1025 needing a working back channel for server->client RPCs.
1034 For 64-bit architectures the base system is now built with Position
1040 Please update your drm-kmod port to after the __FreeBSD_version 1400003
1053 Transport-independent parts of HID support have been split off the USB
1066 https://github.com/bsdimp/freebsd-git-docs/blob/main/src-cvt.md
1076 Obsolete in-tree GDB 6.1.1 has been removed. GDB (including kgdb)
1080 ping6 has been merged into ping. It can now be called as "ping -6".
1085 If you have multi-fib configuration and rely on existence of all
1089 The internal pre-processor in the calendar(1) program has been
1090 extended to support more C pre-processor commands (e.g. #ifdef, #else,
1097 have been moved to the deskutils/calendar-data port, much like the
1099 make delete-old-files, you need to install it to retain full
1106 find sys -name LINT\* -delete
1110 command you want to un-auger the tree is
1112 svn revert -R .
1126 The ZFS cache file has moved from /boot to /etc to match the OpenZFS
1127 upstream default. A fallback to /boot has been added for mountroot.
1129 Pool auto import behavior at boot has been moved from the kernel module
1130 to an explicit "zpool import -a" in one of the rc scripts enabled by
1131 zfs_enable=YES. This means your non-root zpools won't auto import until
1147 As such, all the NFS modules must be re-compiled from sources.
1150 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
1169 accepted. An exp-run has identified all of the problems with this in
1170 ports, but other non-ports software may need extra escapes removed to
1174 from rtld: Undefined symbol "regcomp@FBSD_1.6" -- It is imperative that
1180 implementation corrects non-conformant behavior of the previous bc
1198 re-enable it for system root only on non-ZFS filesystems with the
1202 It may be advised to setup aliases for grep to default to `-d skip` if
1203 commonly non-recursively grepping a list that includes directories and
1209 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
1222 a slightly older -CURRENT userland and older FreeBSD userlands may not
1234 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
1242 amd is still available in the sysutils/am-utils port.
1248 The WITH_GPL_DTC option has been removed. The BSD-licenced device tree
1263 ncurses has been updated to a newer version (6.2-20200215). Given the ABI
1286 Architectures not supported by in-tree Clang/LLVM require an
1293 short-term transition aid they may be enabled via WITH_* options.
1294 GCC 4.2.1 is expected to be removed from the tree on 2020-03-31.
1309 Kernel-loadable random(4) modules are no longer unloadable.
1312 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
1366 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
1374 to /boot/loader.conf hpt27xx_load="YES", hptmv_load="YES",
1385 with ping. If you use any of -ARWXaghmrtwx, you must update your
1390 and the "-o sync_unmount" and "-o init_backgrounded" mount options have
1398 a non-default value, please tell asomers@FreeBSD.org why.
1404 world-readable. If the /var/account directory must be created by
1416 Clang, llvm, lld, lldb, compiler-rt, libc++, libunwind and openmp have
1427 User-wired pages now have their own counter,
1430 long. bhyve VMs wired with the -S are now subject to the user
1442 if_tun_load="YES" entries in /boot/loader.conf to load the if_tuntap
1452 non-zero to bypass the random device prior to seeding, or zero to
1454 For now, set to 1 (unsafe) by default to restore pre-r346250 boot
1458 read-only diagnostic sysctl that is set when bypass is enabled and
1466 non-zero to disable warnings in dmesg when the same conditions are
1479 r338192 (Aug. 22, 2018) will not work unless the "-use-udpsock"
1481 nfsuserd daemons built from head sources that are post-r338192 are
1487 /etc/rc.conf, fuse_load="YES" entries in /boot/loader.conf, and
1491 Clang, llvm, lld, lldb, compiler-rt and libc++ have been upgraded to
1521 the -b (bootnum) parameter for commands where the bootnum was previously
1522 specified with each option. For example 'efibootmgr -B 0001' is now
1523 'efibootmgr -B -b 0001'.
1534 The XLP config has been removed. We can't support 64-bit atomics in this
1535 kernel because it is running in 32-bit mode. XLP users must transition
1536 to running a 64-bit kernel (XLP64 or XLPN32).
1545 Clang, llvm, lld, lldb, compiler-rt and libc++ have been upgraded to
1563 by building a world with -DWITHOUT_BSD_CRTBEGIN.
1568 FreeBSD-13. It is available as a package (ctm) for all supported
1579 $ newsyslog -Nrv
1586 just install the drm-kmod port. All others should install
1587 drm-legacy-kmod.
1590 drm-kmod. For hardware older than 2013, however, some users will need
1591 to use drm-legacy-kmod if drm-kmod doesn't work for them. Hardware older
1592 than 2008 usually only works in drm-legacy-kmod. The graphics team can
1595 have hardware supported by drm-kmod, you are strongly encouraged to use
1598 Other than KPI chasing, drm-legacy-kmod will not be updated. As outlined
1603 Generally, anybody using the drm*-kmod packages should add
1605 cross-threading surprises, especially with automatic driver
1606 loading from X11 startup. These will become the defaults in 13-current
1619 important to rebuild third-party software after upgrading. The value
1633 driver. Make sure to edit /boot/etc/kboot.conf and fstab to use the
1647 default since FreeBSD-11.
1663 bhyve uses userboot.so. It remains 4th-only until some issues are solved
1671 environment, or using `ls --color=never`. The ls(1) specific CLICOLOR
1676 restore the old behavior, set PAGER="more" and MANPAGER="more -s" in
1687 This should have no effect if the kernel is booted via BIOS/legacy boot.
1689 has a buggy firmware that prevents a successful boot due to use of
1699 UEFI boot manager protocol. loader.efi will now look at the
1707 boot blocks. For a transition period, we will install a
1709 until the boot blocks can be updated (hard link because old
1710 zfs boot blocks don't understand symlinks).
1718 in /boot/loader.conf
1721 u-boot will expose as an EFI frame buffer.
1726 existing systems. Do not skip the "mergemaster -Fp" step before
1732 still be run as non-root by setting ntpd_user=ntpd in rc.conf, after
1748 netstat has been broken to allow 32-bit binaries to work on
1749 64-bit kernels without modification. These programs will need
1752 structures from pointers to 64-bit virtual addresses.
1768 Clang, llvm, lld, lldb, compiler-rt and libc++ have been upgraded to
1795 The on-disk format for hwpmc callchain records has changed to include
1819 The nxge(4) driver has been removed. This driver was for PCI-X 10g
1868 When using syslog-ng, add the 'syslog-protocol' flag to local
1872 unix-dgram("/var/run/log" flags(syslog-protocol));
1898 makefs was modified to be able to tag ISO9660 El Torito boot catalog
1909 FreeBSD boot loader enhanced with Lua scripting. It's purely opt-in for
1911 Co-existence for the transition period will come shortly. Booting is a
1912 complex environment and test coverage for Lua-enabled loaders has been
1914 provisions for backup boot methods.
1923 Clang, llvm, lld, lldb, compiler-rt and libc++ have been upgraded to
1938 into apm. It was a no-op on ACPI in current for a while now (but was
1947 This can be re-enabled by setting the following in loader.conf:
1952 hardclock-based software watchdog if no hardware watchdog is
1963 by default as the lesser evil in r326857. If you boot off ZFS and/or
1972 Newer versions of loader can boot old kernels without issue.
1980 The naive and non-compliant support of posix_fallocate(2) in ZFS
1991 /etc/src-env.conf (not /etc/src.conf), or passing the option in the
1996 builds, and /usr/obj/<arch>/<srcdir> for cross-builds, to a unified
1998 format by setting WITHOUT_UNIFIED_OBJDIR=yes in /etc/src-env.conf,
1999 the environment, or with -DWITHOUT_UNIFIED_OBJDIR when building.
2002 tools by looking up the OBJDIR used by 'make -V .OBJDIR' means rather
2006 The native-xtools target no longer installs the files by default to the
2007 OBJDIR. Use the native-xtools-install target with a DESTDIR to install
2008 to ${DESTDIR}/${NXTP} where NXTP defaults to /nxb-bin.
2011 As part of the boot loader infrastructure cleanup, LOADER_*_SUPPORT
2017 libstand has turned into a private library for sys/boot use only.
2018 It is no longer supported as a public interface outside of sys/boot.
2027 When building multiple kernels using KERNCONF, non-existent KERNCONF
2041 For 32-bit arm compiled for hard-float support, soft-floating point
2044 /usr/libsoft also existed). Only users with a hard-float ld.so, but
2045 soft-float everything else should be affected.
2048 The geli password typed at boot is now hidden. To restore the previous
2062 - The "beforecheck" and "aftercheck" targets are now specified.
2063 - ${CHECKDIR} (added in commit noted above) has been removed.
2064 - Legacy behavior can be enabled by setting
2073 The end-user should set "WITH_INSTALL_AS_USER" in src.conf(5) or the
2081 moved to the end of the area reserved for the boot block.
2086 foreground mode (i.e., do not use the -p or -y options). As it
2098 Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 5.0.0.
2104 r-commands (rlogin, rsh, etc.) to be built with the base system.
2107 The FreeBSD/powerpc platform now uses a 64-bit type for time_t. This is
2113 of 32-bit compatibility. All 32-bit binaries will be affected.
2118 fashion. This prevents many of the common foot-shooting actions in the
2130 fashion. This prevents many of the common foot-shooting actions in the
2152 via pkg install heirloom-doctools.
2159 If you load it as a module, make sure this is in /boot/loader.conf:
2164 If you have if_ath_pci in /boot/loader.conf, ensure it is after
2175 bus bind type - this is where probe/attach is done.
2180 The "ino64" 64-bit inode project has been committed, which extends
2188 For the safest in-place upgrade begin by removing previous build
2189 artifacts via "rm -rf /usr/obj/*". Then, carefully follow the full
2200 migration before the end-of-life date for FreeBSD 11.
2218 instead of requiring that the aarch64-binutils port or package be
2219 installed. To continue using aarch64-binutils, set
2220 CROSS_BINUTILS_PREFIX=/usr/local/aarch64-freebsd/bin .
2238 - `cfiscsi_load="YES"` in loader.conf(5).
2239 - Add `cfiscsi` to `$kld_list` in rc.conf(5).
2240 - ctladm(8)/ctld(8), when compiled with iSCSI support
2264 Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 4.0.0.
2292 but you use igb(4), you need to re-add em(4) to your custom
2296 Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 3.9.1.
2301 Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 3.9.0.
2312 chromebook_platform(4), to work properly on Chromebook-class hardware.
2318 rtwn(4) main module + rtwn_usb(4) and rtwn_pci(4) bus-specific
2321 conflict (rtwnrtl8192cU(B) -> rtwnrtl8192cE(B))
2325 - rcs: Latest GPLv3 GNU rcs version.
2326 - rcs57: Copy of the latest version of GNU rcs (GPLv2) before it was
2341 to avoid a name clash with shared libraries on case-insensitive file
2348 - rcs: Latest GPLv3 GNU rcs version.
2349 - rcs57: Copy of the latest version of GNU rcs (GPLv2) from base.
2370 standards-conforming UDP application. The new behaviour can be
2381 After branch N is created, entries older than the N-2 branch point are removed
2389 -------------
2394 commands with 'env -i '. See the env(1) manual page for more details.
2395 Occasionally a build failure will occur with "make -j" due to a race
2396 condition. If this happens try building again without -j, and please
2401 do an upgrade to the new branch. This is the best-tested upgrade path,
2412 major release at a time, including running `make delete-old` at each
2413 step.
2428 ---------
2429 When upgrading the boot ZFS pool to a new version (via zpool upgrade),
2432 1) recompile and reinstall the ZFS boot loader and boot block
2435 2) update the ZFS boot block on your boot drive (only required when
2438 When booting on x86 via BIOS, use the following to update the ZFS boot
2439 block on the freebsd-boot partition of a GPT partitioned drive ada0:
2440 gpart bootcode -p /boot/gptzfsboot -i $N ada0
2447 Non-boot pools do not need these updates.
2450 ---------
2452 There are two locations the boot loader can be installed into. The
2456 fallback location of \EFI\BOOT\BOOTxxx.EFI. Generally, you will copy
2457 /boot/loader.efi to this location, but on systems installed a long time
2458 ago the ESP may be too small and /boot/boot1.efi may be needed unless
2461 Recent systems will have the ESP mounted on /boot/efi, but older ones
2463 location. Older arm SD images with MBR used /boot/msdos as the
2466 The EFI boot loader rarely needs to be updated. For ZFS booting,
2474 -----------------
2477 failsafe as it uses a /usr/obj tree with a fresh mini-buildworld,
2479 make kernel-toolchain
2480 make -DALWAYS_CHECK_MAKE buildkernel KERNCONF=YOUR_KERNEL_HERE
2481 make -DALWAYS_CHECK_MAKE installkernel KERNCONF=YOUR_KERNEL_HERE
2486 ---------------------
2487 If you just want to boot a kernel once (because you are not sure
2488 if it works, or if you want to boot a known bad kernel to provide
2490 make installkernel KERNCONF=YOUR_KERNEL_HERE KODIR=/boot/testkernel
2491 nextboot -k testkernel
2494 -----------------------------------------------------------
2504 etcupdate -p [5]
2506 etcupdate -B [4]
2507 make delete-old [6]
2510 To cross-install current onto a separate partition
2511 --------------------------------------------------
2518 <boot into -stable>
2523 make installworld DESTDIR=${CURRENT_ROOT} -DDB_FROM_SRC
2534 To upgrade in-place from stable to current
2535 ----------------------------------------------
2542 etcupdate -p [5]
2544 etcupdate -B [4]
2545 make delete-old [6]
2554 Also, if you are tracking -current, you must be subscribed to
2555 freebsd-current@freebsd.org. Make sure that before you update
2557 messages there. If in doubt, please track -stable which has
2562 [1] If you have third party modules, such as drm-kmod or vmware, you
2565 your system and install them as well. If you are running -current, you
2571 PORTS_MODULES+=graphics/drm-kmod graphics/nvidia-drm-kmod
2578 [3] From the bootblocks, boot -s, and then do
2579 fsck -p
2580 mount -u /
2581 mount -a
2584 adjkerntz -i # if CMOS is wall time
2585 Also, when doing a major release upgrade, it is required that you boot
2588 [4] Note: This step is non-optional. Failure to do this step
2592 as the archives of freebsd-current and freebsd-hackers mailing lists
2595 [5] Usually this step is a no-op. However, from time to time
2597 step.
2600 can be deleted by "make delete-old-libs", but you have to make
2607 to do so may leave you with a system that is hard to boot to recover. A
2627 breakages in tracking -current. It is not guaranteed to be a complete
2634 Copyright 1998-2009 M. Warner Losh <imp@FreeBSD.org>