#
c8bdef15 |
| 04-Feb-2024 |
Andrew Morton <akpm@linux-foundation.org> |
Merge branch 'master' into mm-hotfixes-stable
|
#
41b9fb38 |
| 01-Feb-2024 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter.
As Paolo promised we continue to h
Merge tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter.
As Paolo promised we continue to hammer out issues in our selftests. This is not the end but probably the peak.
Current release - regressions:
- smc: fix incorrect SMC-D link group matching logic
Current release - new code bugs:
- eth: bnxt: silence WARN() when device skips a timestamp, it happens
Previous releases - regressions:
- ipmr: fix null-deref when forwarding mcast packets
- conntrack: evaluate window negotiation only for packets in the REPLY direction, otherwise SYN retransmissions trigger incorrect window scale negotiation
- ipset: fix performance regression in swap operation
Previous releases - always broken:
- tcp: add sanity checks to types of pages getting into the rx zerocopy path, we only support basic NIC -> user, no page cache pages etc.
- ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()
- nt_tables: more input sanitization changes
- dsa: mt7530: fix 10M/100M speed on MediaTek MT7988 switch
- bridge: mcast: fix loss of snooping after long uptime, jiffies do wrap on 32bit
- xen-netback: properly sync TX responses, protect with locking
- phy: mediatek-ge-soc: sync calibration values with MediaTek SDK, increase connection stability
- eth: pds: fixes for various teardown, and reset races
Misc:
- hsr: silence WARN() if we can't alloc supervision frame, it happens"
* tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits) doc/netlink/specs: Add missing attr in rt_link spec idpf: avoid compiler padding in virtchnl2_ptype struct selftests: mptcp: join: stop transfer when check is done (part 2) selftests: mptcp: join: stop transfer when check is done (part 1) selftests: mptcp: allow changing subtests prefix selftests: mptcp: decrease BW in simult flows selftests: mptcp: increase timeout to 30 min selftests: mptcp: add missing kconfig for NF Mangle selftests: mptcp: add missing kconfig for NF Filter in v6 selftests: mptcp: add missing kconfig for NF Filter mptcp: fix data re-injection from stale subflow selftests: net: enable some more knobs selftests: net: add missing config for NF_TARGET_TTL selftests: forwarding: List helper scripts in TEST_FILES Makefile variable selftests: net: List helper scripts in TEST_FILES Makefile variable selftests: net: Remove executable bits from library scripts selftests: bonding: Check initial state selftests: team: Add missing config options hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove xen-netback: properly sync TX responses ...
show more ...
|
#
cf6601e2 |
| 01-Feb-2024 |
Jakub Kicinski <kuba@kernel.org> |
Merge branch 'selftests-net-more-small-fixes'
Benjamin Poirier says:
==================== selftests: net: More small fixes
Some small fixes for net selftests which follow from these recent commits
Merge branch 'selftests-net-more-small-fixes'
Benjamin Poirier says:
==================== selftests: net: More small fixes
Some small fixes for net selftests which follow from these recent commits: dd2d40acdbb2 ("selftests: bonding: Add more missing config options") 49078c1b80b6 ("selftests: forwarding: Remove executable bits from lib.sh") ====================
Link: https://lore.kernel.org/r/20240131140848.360618-1-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
show more ...
|
#
9d851dd4 |
| 31-Jan-2024 |
Benjamin Poirier <bpoirier@nvidia.com> |
selftests: net: Remove executable bits from library scripts
setup_loopback.sh and net_helper.sh are meant to be sourced from other scripts, not executed directly. Therefore, remove the executable bi
selftests: net: Remove executable bits from library scripts
setup_loopback.sh and net_helper.sh are meant to be sourced from other scripts, not executed directly. Therefore, remove the executable bits from those files' permissions.
This change is similar to commit 49078c1b80b6 ("selftests: forwarding: Remove executable bits from lib.sh")
Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test") Fixes: 3bdd9fd29cb0 ("selftests/net: synchronize udpgro tests' tx and rx connection") Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Link: https://lore.kernel.org/r/20240131140848.360618-4-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
show more ...
|
Revision tags: v6.8-rc1 |
|
#
fe33c0fb |
| 17-Jan-2024 |
Andrew Morton <akpm@linux-foundation.org> |
Merge branch 'master' into mm-hotfixes-stable
|
#
cf79f291 |
| 22-Jan-2024 |
Maxime Ripard <mripard@kernel.org> |
Merge v6.8-rc1 into drm-misc-fixes
Let's kickstart the 6.8 fix cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
#
3e7aeb78 |
| 11-Jan-2024 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni: "The most interesting thing is probably the networking structs
Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni: "The most interesting thing is probably the networking structs reorganization and a significant amount of changes is around self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev, netns, mibs) to optimize cacheline consumption and set up build time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up to 40%
- Add page-pool netlink-based introspection, exposing the memory usage and recycling stats. This helps indentify bad PP users and possible leaks
- Refine TCP/DCCP source port selection to no longer favor even source port at connect() time when IP_LOCAL_PORT_RANGE is set. This lowers the time taken by connect() for hosts having many active connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to 128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the datapath first
- Introduce TC block ports tracking and use. This allows supporting multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements: - BPF register bounds logic and range support along with a large test suite - log improvements - complete precision tracking support for register spills - track aligned STACK_ZERO cases as imprecise spilled registers. This improves the verifier "instructions processed" metric from single digit to 50-60% for some programs - support for user's global BPF subprogram arguments with few commonly requested annotations for a better developer experience - support tracking of BPF_JNE which helps cases when the compiler transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like - several fixes
- Add initial TX metadata implementation for AF_XDP with support in mlx5 and stmmac drivers. Two types of offloads are supported right now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily instead of unconditionally before the main program, so they can be guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task within a specific cgroup v1 hierarchy where the latter is identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value field obtained via direct load which is a use-case needed in sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far undocumented features
- Convert all the net self-tests to run in unique netns, to avoid random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool can now generate user-space code for all genetlink families for which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the full C API, but already allow implementing functional PHY drivers in rust
- Introduce queue and NAPI support in the netdev Netlink interface, allowing complete access to the device <> NAPIs <> queues relationship
- Introduce notifications filtering for devlink to allow control application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD platform
- Expose pin fractional frequency offset value over new DPLL generic netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet: - Octeon CN10K devices - Broadcom 5760X P7 - Qualcomm SM8550 SoC - Texas Instrument DP83TG720S PHY
- Bluetooth: - IMC Networks Bluetooth radio
Removed:
- WiFi: - libertas 16-bit PCMCIA support - Atmel at76c50x drivers - HostAP ISA/PCMCIA style 802.11b driver - zd1201 802.11b USB dongles - Orinoco ISA/PCMCIA 802.11b driver - Aviator/Raytheon driver - Planet WL3501 driver - RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs: - Intel (100G, ice, idpf): - allow one by one port representors creation and removal - add temperature and clock information reporting - add get/set for ethtool's header split ringparam - add again FW logging - adds support switchdev hardware packet mirroring - iavf: implement symmetric-xor RSS hash - igc: add support for concurrent physical and free-running timers - i40e: increase the allowable descriptors - nVidia/Mellanox: - Preparation for Socket-Direct multi-dev netdev. That will allow in future releases combining multiple PFs devices attached to different NUMA nodes under the same netdev - Broadcom (bnxt): - TX completion handling improvements - add basic ntuple filter support - reduce MSIX vectors usage for MQPRIO offload - add VXLAN support, USO offload and TX coalesce completion for P7 - Marvell Octeon EP: - xmit-more support - add PF-VF mailbox support and use it for FW notifications for VFs - Wangxun (ngbe/txgbe): - implement ethtool functions to operate pause param, ring param, coalesce channel number and msglevel - Netronome/Corigine (nfp): - add flow-steering support - support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual: - Xilinx AXI: remove duplicate DMA code adopting the dma engine driver - stmmac: add support for HW-accelerated VLAN stripping - TI AM654x sw: add mqprio, frame preemption & coalescing - gve: add support for non-4k page sizes. - virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches: - allow firmware upgrade without a reboot - more flexible support for bridge flooding via the compressed FID flooding mode
- Ethernet embedded switches: - Microchip: - fine-tune flow control and speed configurations in KSZ8xxx - KSZ88X3: enable setting rmii reference - Renesas: - add jumbo frames support - Marvell: - 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs: - aquantia: add firmware load support - at803x: refactor the driver to simplify adding support for more chip variants - NXP C45 TJA11xx: Add MACsec offload support
- Wifi: - MediaTek (mt76): - NVMEM EEPROM improvements - mt7996 Extremely High Throughput (EHT) improvements - mt7996 Wireless Ethernet Dispatcher (WED) support - mt7996 36-bit DMA support - Qualcomm (ath12k): - support for a single MSI vector - WCN7850: support AP mode - Intel (iwlwifi): - new debugfs file fw_dbg_clear - allow concurrent P2P operation on DFS channels
- Bluetooth: - QCA2066: support HFP offload - ISO: more broadcast-related improvements - NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits) lan78xx: remove redundant statement in lan78xx_get_eee lan743x: remove redundant statement in lan743x_ethtool_get_eee bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer() bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel() bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter() tcp: Revert no longer abort SYN_SENT when receiving some ICMP Revert "mlx5 updates 2023-12-20" Revert "net: stmmac: Enable Per DMA Channel interrupt" ipvlan: Remove usage of the deprecated ida_simple_xx() API ipvlan: Fix a typo in a comment net/sched: Remove ipt action tests net: stmmac: Use interrupt mode INTM=1 for per channel irq net: stmmac: Add support for TX/RX channel interrupt net: stmmac: Make MSI interrupt routine generic dt-bindings: net: snps,dwmac: per channel irq net: phy: at803x: make read_status more generic net: phy: at803x: add support for cdt cross short test for qca808x net: phy: at803x: refactor qca808x cable test get status function net: phy: at803x: generalize cdt fault length function net: ethernet: cortina: Drop TSO support ...
show more ...
|
Revision tags: v6.7, v6.7-rc8, v6.7-rc7 |
|
#
2437c0f5 |
| 23-Dec-2023 |
David S. Miller <davem@davemloft.net> |
Merge branch 'net-selftests-unique-namespace-last-part'
Hangbin Liu says:
==================== Convert net selftests to run in unique namespace (last part)
Here is the last part of converting net
Merge branch 'net-selftests-unique-namespace-last-part'
Hangbin Liu says:
==================== Convert net selftests to run in unique namespace (last part)
Here is the last part of converting net selftests to run in unique namespace. This part converts all left tests. After the conversion, we can run the net sleftests in parallel. e.g.
# ./run_kselftest.sh -n -t net:reuseport_bpf TAP version 13 1..1 # selftests: net: reuseport_bpf ok 1 selftests: net: reuseport_bpf mod 10... # Socket 0: 0 # Socket 1: 1 ... # Socket 4: 19 # Testing filter add without bind... # SUCCESS
# ./run_kselftest.sh -p -n -t net:cmsg_so_mark.sh -t net:cmsg_time.sh -t net:cmsg_ipv6.sh TAP version 13 1..3 # selftests: net: cmsg_so_mark.sh ok 1 selftests: net: cmsg_so_mark.sh # selftests: net: cmsg_time.sh ok 2 selftests: net: cmsg_time.sh # selftests: net: cmsg_ipv6.sh ok 3 selftests: net: cmsg_ipv6.sh
# ./run_kselftest.sh -p -n -c net TAP version 13 1..95 # selftests: net: reuseport_bpf_numa ok 3 selftests: net: reuseport_bpf_numa # selftests: net: reuseport_bpf_cpu ok 2 selftests: net: reuseport_bpf_cpu # selftests: net: sk_bind_sendto_listen ok 9 selftests: net: sk_bind_sendto_listen # selftests: net: reuseaddr_conflict ok 5 selftests: net: reuseaddr_conflict ...
Here is the part 1 link: https://lore.kernel.org/netdev/20231202020110.362433-1-liuhangbin@gmail.com part 2 link: https://lore.kernel.org/netdev/20231206070801.1691247-1-liuhangbin@gmail.com part 3 link: https://lore.kernel.org/netdev/20231213060856.4030084-1-liuhangbin@gmail.com ====================
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
4416c5f5 |
| 19-Dec-2023 |
Hangbin Liu <liuhangbin@gmail.com> |
selftests/net: use unique netns name for setup_loopback.sh setup_veth.sh
The setup_loopback and setup_veth use their own way to create namespace. So let's just re-define server_ns/client_ns to uniqu
selftests/net: use unique netns name for setup_loopback.sh setup_veth.sh
The setup_loopback and setup_veth use their own way to create namespace. So let's just re-define server_ns/client_ns to unique name. At the same time update the namespace name in gro.sh and toeplitz.sh. As I don't have env to run toeplitz.sh. Here is only the gro test result.
# ./gro.sh running test ipv4 data Expected {200 }, Total 1 packets Received {200 }, Total 1 packets. ... Gro::large test passed. All Tests Succeeded!
Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v6.7-rc6, v6.7-rc5, v6.7-rc4, v6.7-rc3, v6.7-rc2, v6.7-rc1, v6.6, v6.6-rc7, v6.6-rc6, v6.6-rc5, v6.6-rc4, v6.6-rc3, v6.6-rc2, v6.6-rc1, v6.5, v6.5-rc7, v6.5-rc6, v6.5-rc5, v6.5-rc4, v6.5-rc3, v6.5-rc2, v6.5-rc1, v6.4, v6.4-rc7, v6.4-rc6, v6.4-rc5, v6.4-rc4, v6.4-rc3, v6.4-rc2, v6.4-rc1, v6.3, v6.3-rc7, v6.3-rc6, v6.3-rc5, v6.3-rc4, v6.3-rc3, v6.3-rc2, v6.3-rc1, v6.2, v6.2-rc8, v6.2-rc7, v6.2-rc6, v6.2-rc5, v6.2-rc4, v6.2-rc3, v6.2-rc2, v6.2-rc1, v6.1, v6.1-rc8, v6.1-rc7, v6.1-rc6, v6.1-rc5, v6.1-rc4, v6.1-rc3, v6.1-rc2, v6.1-rc1, v6.0, v6.0-rc7, v6.0-rc6, v6.0-rc5, v6.0-rc4, v6.0-rc3, v6.0-rc2, v6.0-rc1, v5.19, v5.19-rc8, v5.19-rc7, v5.19-rc6, v5.19-rc5, v5.19-rc4, v5.19-rc3, v5.19-rc2, v5.19-rc1, v5.18, v5.18-rc7, v5.18-rc6, v5.18-rc5, v5.18-rc4, v5.18-rc3, v5.18-rc2, v5.18-rc1, v5.17, v5.17-rc8, v5.17-rc7, v5.17-rc6, v5.17-rc5, v5.17-rc4, v5.17-rc3, v5.17-rc2, v5.17-rc1 |
|
#
762f99f4 |
| 15-Jan-2022 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 5.17 merge window.
|
Revision tags: v5.16, v5.16-rc8, v5.16-rc7, v5.16-rc6, v5.16-rc5 |
|
#
86329873 |
| 09-Dec-2021 |
Daniel Lezcano <daniel.lezcano@linaro.org> |
Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next
"Add optional variant of of_reset_control_get_exclusive(). If the requested reset is not
Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next
"Add optional variant of of_reset_control_get_exclusive(). If the requested reset is not specified in the device tree, this function returns NULL instead of an error."
This dependency is needed for the Generic Timer Module (a.k.a OSTM) support for RZ/G2L.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
show more ...
|
#
5d8dfaa7 |
| 09-Dec-2021 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.15' into next
Sync up with the mainline to get the latest APIs and DT bindings.
|
Revision tags: v5.16-rc4, v5.16-rc3, v5.16-rc2, v5.16-rc1, v5.15, v5.15-rc7, v5.15-rc6, v5.15-rc5 |
|
#
e700ac21 |
| 06-Oct-2021 |
Tony Lindgren <tony@atomide.com> |
Merge branch 'pruss-fix' into fixes
Merge in a fix for pruss reset issue caused by enabling pruss for am335x.
|
Revision tags: v5.15-rc4, v5.15-rc3 |
|
#
ffb1e76f |
| 20-Sep-2021 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v5.15-rc2' into spi-5.15
Linux 5.15-rc2
|
Revision tags: v5.15-rc2 |
|
#
d1b803f4 |
| 15-Sep-2021 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-next
Catch-up on 5.15-rc1 and sync with drm-intel-gt-next to prepare the PXP topic branch.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
#
d5dd580d |
| 15-Sep-2021 |
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> |
Merge drm/drm-next into drm-intel-gt-next
Close the divergence which has caused patches not to apply and have a solid baseline for the PXP patches that Rodrigo will send a topic branch PR for.
Sign
Merge drm/drm-next into drm-intel-gt-next
Close the divergence which has caused patches not to apply and have a solid baseline for the PXP patches that Rodrigo will send a topic branch PR for.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
show more ...
|
#
2f765205 |
| 14-Sep-2021 |
Maxime Ripard <maxime@cerno.tech> |
Merge drm/drm-next into drm-misc-next
Kickstart new drm-misc-next cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
Revision tags: v5.15-rc1 |
|
#
c2f4954c |
| 11-Sep-2021 |
Thomas Gleixner <tglx@linutronix.de> |
Merge branch 'linus' into smp/urgent
Ensure that all usage sites of get/put_online_cpus() except for the struggler in drivers/thermal are gone. So the last user and the deprecated inlines can be rem
Merge branch 'linus' into smp/urgent
Ensure that all usage sites of get/put_online_cpus() except for the struggler in drivers/thermal are gone. So the last user and the deprecated inlines can be removed.
show more ...
|
#
9e9fb765 |
| 01-Sep-2021 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski: "Core:
- Enable memcg accounting for various networking o
Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski: "Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call bpf_setsockopt(), e.g. to switch to another congestion control algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp: - enable mid-stream window clamping (by user space or BPF) - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD - more accurate DSACK processing for RACK-TLP
- mptcp: - add full mesh path manager option - add partial support for MP_FAIL - improve use of backup subflows - optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb): - support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105): - fast aging support - support for "H" switch topologies - traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet - support getcrosststamp() with PCIe PTM (Precision Time Measurement) for better time sync - support Credit-Based Shaper (CBS) offload, enabling HW traffic prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt) - support pulse-per-second output - support larger Rx rings
- Mellanox Ethernet (mlx5) - support ethtool RSS contexts and MQPRIO channel mode - support LAG offload with bridging - support devlink rate limit API - support packet sampling on tunnels
- Huawei Ethernet (hns3): - basic devlink support - add extended IRQ coalescing support - report extended link state
- Netronome Ethernet (nfp): - add conntrack offload support
- Broadcom WiFi (brcmfmac): - add WPA3 Personal with FT to supported cipher suites - support 43752 SDIO device
- Intel WiFi (iwlwifi): - support scanning hidden 6GHz networks - support for a new hardware family (Bz)
- Xen pv driver: - harden netfront against malicious backends
- Qualcomm mobile - ipa: refactor power management and enable automatic suspend - mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits) net: Add depends on OF_NET for LiteX's LiteETH ipv6: seg6: remove duplicated include net: hns3: remove unnecessary spaces net: hns3: add some required spaces net: hns3: clean up a type mismatch warning net: hns3: refine function hns3_set_default_feature() ipv6: remove duplicated 'net/lwtunnel.h' include net: w5100: check return value after calling platform_get_resource() net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource() net: mdio-ipq4019: Make use of devm_platform_ioremap_resource() fou: remove sparse errors ipv4: fix endianness issue in inet_rtm_getroute_build_skb() octeontx2-af: Set proper errorcode for IPv4 checksum errors octeontx2-af: Fix static code analyzer reported issues octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg octeontx2-af: Fix loop in free and unmap counter af_unix: fix potential NULL deref in unix_dgram_connect() dpaa2-eth: Replace strlcpy with strscpy octeontx2-af: Use NDC TX for transmit packet data ...
show more ...
|
Revision tags: v5.14 |
|
#
9af771d2 |
| 26-Aug-2021 |
Paolo Abeni <pabeni@redhat.com> |
selftests/net: allow GRO coalesce test on veth
This change extends the existing GRO coalesce test to allow running on top of a veth pair, so that no H/W dep is required to run them.
By default gro.
selftests/net: allow GRO coalesce test on veth
This change extends the existing GRO coalesce test to allow running on top of a veth pair, so that no H/W dep is required to run them.
By default gro.sh will use the veth backend, and will try to use exiting H/W in loopback mode if a specific device name is provided with the '-i' command line option.
No functional change is intended for the loopback-based tests, just move all the relevant initialization/cleanup code into the related script.
Introduces a new initialization helper script for the veth backend, and plugs the correct helper script according to the provided command line.
Additionally, enable veth-based tests by default.
v1 -> v2: - drop unused code in setup_veth_ns() - Willem
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v5.14-rc7, v5.14-rc6, v5.14-rc5 |
|
#
6234219d |
| 05-Aug-2021 |
David S. Miller <davem@davemloft.net> |
Merge branch 'GRO-Toeplitz-selftests'
Coco Li says:
==================== GRO and Toeplitz hash selftests
This patch contains two selftests in net, as well as respective scripts to run the tests on
Merge branch 'GRO-Toeplitz-selftests'
Coco Li says:
==================== GRO and Toeplitz hash selftests
This patch contains two selftests in net, as well as respective scripts to run the tests on a single machine in loopback mode. GRO: tests the Linux kernel GRO behavior Toeplitz: tests the toeplitz hash implementation ====================
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
7d157501 |
| 05-Aug-2021 |
Coco Li <lixiaoyan@google.com> |
selftests/net: GRO coalesce test
Implement a GRO testsuite that expects Linux kernel GRO behavior. All tests pass with the kernel software GRO stack. Run against a device with hardware GRO to verify
selftests/net: GRO coalesce test
Implement a GRO testsuite that expects Linux kernel GRO behavior. All tests pass with the kernel software GRO stack. Run against a device with hardware GRO to verify that it matches the software stack.
gro.c generates packets and sends them out through a packet socket. The receiver in gro.c (run separately) receives the packets on a packet socket, filters them by destination ports using BPF and checks the packet geometry to see whether GRO was applied.
gro.sh provides a wrapper to run the gro.c in NIC loopback mode. It is not included in continuous testing because it modifies network configuration around a physical NIC: gro.sh sets the NIC in loopback mode, creates macvlan devices on the physical device in separate namespaces, and sends traffic generated by gro.c between the two namespaces to observe coalescing behavior.
GRO coalescing is time sensitive. Some tests may prove flaky on some hardware.
Note that this test suite tests for software GRO unless hardware GRO is enabled (ethtool -K $DEV rx-gro-hw on).
To test, run ./gro.sh. The wrapper will output success or failed test names, and generate log.txt and stderr.
Sample log.txt result: ... pure data packet of same size: Test succeeded
large data packets followed by a smaller one: Test succeeded
small data packets followed by a larger one: Test succeeded ...
Sample stderr result: ... carrier ready running test ipv4 data Expected {200 }, Total 1 packets Received {200 }, Total 1 packets. ...
Signed-off-by: Coco Li <lixiaoyan@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|