Merge tag 'v5.14-rc6' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.

Signed-off-by: Maarten Lankhorst <maarten.lankh

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge tag 'v5.13' into next

Sync up with the mainline to get the latest parport API.

Merge drm/drm-next into drm-intel-gt-next

Catching up with 5.14-rc1 and also preparing for a
needed common topic branch for the "Minor revid/stepping
and workaround cleanup"

Reference: https://patc

Merge drm/drm-next into drm-intel-gt-next

Catching up with 5.14-rc1 and also preparing for a
needed common topic branch for the "Minor revid/stepping
and workaround cleanup"

Reference: https://patchwork.freedesktop.org/series/92299/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catching up with 5.14-rc1

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-next

Bring drm-intel-next closer to drm-next and drm-intel-gt-next for a more
feasible baseline for topic branches.

Signed-off-by: Jani Nikula <jani.nikula@intel.c

Merge drm/drm-next into drm-intel-next

Bring drm-intel-next closer to drm-next and drm-intel-gt-next for a more
feasible baseline for topic branches.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge branch 'fixes-v5.14' into fixes

Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tool updates from Arnaldo Carvalho de Melo:
"New features:

- Enable use of

Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tool updates from Arnaldo Carvalho de Melo:
"New features:

- Enable use of BPF counters with 'perf stat --for-each-cgroup',
using per-CPU 'cgroup-switch' events with an attached BPF program
that does aggregation per-cgroup in the kernel instead of using
per-cgroup perf events.

- Add Topdown metrics L2 events as default events in 'perf stat' for
systems having those events.

Hardware tracing:

- Add a config for max loops without consuming a packet in the Intel
PT packet decoder, set via 'perf config intel-pt.max-loops=N'

Hardware enablement:

- Disable misleading NMI watchdog message in 'perf stat' on hybrid
systems such as Intel Alder Lake.

- Add a dummy event on hybrid systems to collect metadata records.

- Add 24x7 nest metric events for the Power10 platform.

Fixes:

- Fix event parsing for PMUs starting with the same prefix.

- Fix the 'perf trace' 'trace' alias installation dir.

- Fix buffer size to report iregs in perf script python scripts,
supporting the extended registers in PowerPC.

- Fix overflow in elf_sec__is_text().

- Fix 's' on source line when disasm is empty in the annotation TUI,
accessible via 'perf annotate', 'perf report' and 'perf top'.

- Plug leaks in scandir() returned dirent entries in 'perf test' when
sorting the shell tests.

- Fix --task and --stat with pipe input in 'perf report'.

- Fix 'perf probe' use of debuginfo files by build id.

- If a DSO has both dynsym and symtab ELF sections, read from both
when loading the symbol table, fixing a problem processing Fedora
32 glibc DSOs.

Libraries:

- Add grouping of events to libperf, from code in tools/perf,
allowing libperf users to use that mode.

Misc:

- Filter plt stubs from the 'perf probe --functions' output.

- Update UAPI header copies for asound, DRM, mman-common.h and the
ones affected by the quotactl_fd syscall"

* tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits)
perf test: Add free() calls for scandir() returned dirent entries
libperf: Add tests for perf_evlist__set_leader()
libperf: Remove BUG_ON() from library code in get_group_fd()
libperf: Add group support to perf_evsel__open()
perf tools: Fix pattern matching for same substring in different PMU type
perf record: Add a dummy event on hybrid systems to collect metadata records
perf stat: Add Topdown metrics L2 events as default events
libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader()
libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups
libperf: Move 'leader' from tools/perf to perf_evsel::leader
libperf: Move 'idx' from tools/perf to perf_evsel::idx
libperf: Change tests to single static and shared binaries
perf intel-pt: Add a config for max loops without consuming a packet
perf stat: Disable the NMI watchdog message on hybrid
perf vendor events power10: Adds 24x7 nest metric events for power10 platform
perf script python: Fix buffer size to report iregs in perf script
perf trace: Fix the perf trace link location
perf top: Fix overflow in elf_sec__is_text()
perf annotate: Fix 's' on source line when disasm is empty
perf probe: Do not show @plt function by default
...

show more ...

perf intel-pt: Add a config for max loops without consuming a packet

The Intel PT decoder limits the number of unconditional branches (e.g.
jmps) decoded without consuming any trace packets. General

perf intel-pt: Add a config for max loops without consuming a packet

The Intel PT decoder limits the number of unconditional branches (e.g.
jmps) decoded without consuming any trace packets. Generally, a loop
needs a conditional branch which generates a TNT packet, whereas a "ret"
instruction will generate a TIP or TNT packet. So exceeding the limit is
assumed to be a never-ending loop, which can happen if there has been a
decoding error putting the decoder at the wrong place in the code.

Up until now, the limit of 10000 has been enough but some analytic
purposes have been reported to exceed that.

Increase the limit to 100000, and make it configurable via perf config
intel-pt.max-loops. Also amend the "Never-ending loop" message to
mention the configuration entry.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210701175132.3977-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'perf-tools-for-v5.14-2021-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tool updates from Arnaldo Carvalho de Melo:
"Tools:

- Add cgroup support for 'p

Merge tag 'perf-tools-for-v5.14-2021-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tool updates from Arnaldo Carvalho de Melo:
"Tools:

- Add cgroup support for 'perf top' (-G).

- Add support for KVM MSRs in 'perf kvm stat'

- Support probes on init functions in 'perf probe', to support the
bootconfig format.

- Improve error reporting in 'perf probe'.

- No need to synthesize BUILD_ID records in 'perf inject' if the
MMAP2 records have build ids already.

- Allow toggling source code ('s' hotkey) in 'perf annotate' in all
lines.

- Add itrace options support to 'perf annotate'.

- Support to custom DSO filters for 'perf script'.

Hardware enablement:

- Support the HYBRID_TOPOLOGY and HYBRID_CPU_PMU_CAPS features in the
perf.data file header.

- Support PMU prefix for mem-load and mem-store events, to support
hybrid (BIG little) CPUs such as Intel's Alderlake.

- Support hybrid CPUs in 'perf mem' and 'perf c2c'.

Hardware tracing:

- Intel PT now supports tracing KVM guests.

- Timestamp improvements for ARM's Coresight.

Build:

- Add 'make -C tools/perf build-test' entries for
libopencsd/CORESIGHT=1 and libbpf/LIBBPF_DYNAMIC=1.

- Use bison's --file-prefix-map option to avoid storing full paths
when using O= in the perf build.

Tests:

- Improve the 'perf test' entries for libpfm4 and BPF counters.

Misc:

- Sync msr-index.h, mount.h, kvm headers with the kernel originals.

- Add vendor events and metrics for Intel's Icelake Server & Client"

* tag 'perf-tools-for-v5.14-2021-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (123 commits)
perf session: Add missing evlist__delete when deleting a session
perf annotate: Allow 's' on source code lines
perf dlfilter: Add object_code() to perf_dlfilter_fns
perf dlfilter: Add attr() to perf_dlfilter_fns
perf dlfilter: Add srcline() to perf_dlfilter_fns
perf dlfilter: Add insn() to perf_dlfilter_fns
perf dlfilter: Add resolve_address() to perf_dlfilter_fns
perf build: Install perf_dlfilter.h
perf script: Add option to pass arguments to dlfilters
perf script: Add option to list dlfilters
perf script: Add dlfilter__filter_event_early()
perf script: Add API for filtering via dynamically loaded shared object
perf llvm: Return -ENOMEM when asprintf() fails
perf cs-etm: Delay decode of non-timeless data until cs_etm__flush_events()
tools headers UAPI: Synch KVM's svm.h header with the kernel
tools kvm headers arm64: Update KVM headers from the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools include UAPI: Update linux/mount.h copy
tools arch x86: Sync the msr-index.h copy with the kernel sources
...

show more ...

Merge branch 'cpufreq/cppc-fie' into cpufreq/arm/linux-next

Merge branch 'for-5.14/amd-sfh' into for-linus

- support for Renoir and Cezanne SoCs
- support for Ambient Light Sensor
- support for Human Presence Detection sensor

all from Basavaraj Natikar

Merge tag 'irqchip-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

- Revamped the irqdomain internals to consistently

Merge tag 'irqchip-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

- Revamped the irqdomain internals to consistently cache irqdata

- Expose a new API to simplify IRQ handling involving an irqdomain by
not using the IRQ number

- Convert all the irqchip drivers to this new API

- Allow the Qualcomm PDC driver to be compiled as a module

- Fix HiSi MBIGEN compile warning when CONFIG_ACPI isn't selected

- Remove a bunch of spurious printks on error paths

- The obligatory couple of DT updates

show more ...

Merge tag 'kvmarm-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 updates for v5.14.

- Add MTE support in guests, complete with tag save/restore interface
-

Merge tag 'kvmarm-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 updates for v5.14.

- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes

show more ...

Merge x86/urgent into x86/fpu

Pick up dependent changes which either went mainline (x86/urgent is
based on -rc7 and that contains them) as urgent fixes and the current
x86/urgent branch which contai

Merge x86/urgent into x86/fpu

Pick up dependent changes which either went mainline (x86/urgent is
based on -rc7 and that contains them) as urgent fixes and the current
x86/urgent branch which contains two more urgent fixes, so that the
bigger FPU rework can base off ontop.

Signed-off-by: Borislav Petkov <bp@suse.de>

show more ...

Merge series "ASoC: tlv320aic32x4: Add support for TAS2505" from Claudius Heine <ch@denx.de>:

Hi,

this is v2 from my patchset that add support for the TAS2505 to the tlv320aic32x4 driver.

kind reg

Merge series "ASoC: tlv320aic32x4: Add support for TAS2505" from Claudius Heine <ch@denx.de>:

Hi,

this is v2 from my patchset that add support for the TAS2505 to the tlv320aic32x4 driver.

kind regards,
Claudius

Changes from v1:
- clarified commit message of first patch, which add the type value to the struct
- removed unnecessary code to put and get speaker volume
- removed 'Gain' from 'HP Driver Playback Volume' control
- fixed rebase issues

Claudius Heine (3):
ASoC: tlv320aic32x4: add type to device private data struct
ASoC: tlv320aic32x4: add support for TAS2505
ASoC: tlv320aic32x4: dt-bindings: add TAS2505 to compatible

.../bindings/sound/tlv320aic32x4.txt | 1 +
sound/soc/codecs/tlv320aic32x4-i2c.c | 22 ++-
sound/soc/codecs/tlv320aic32x4-spi.c | 23 ++-
sound/soc/codecs/tlv320aic32x4.c | 139 +++++++++++++++++-
sound/soc/codecs/tlv320aic32x4.h | 10 ++
5 files changed, 186 insertions(+), 9 deletions(-)

base-commit: 70585216fe7730d9fb5453d3e2804e149d0fe201
--
2.32.0

show more ...

Backmerge tag 'v5.13-rc7' into drm-next

Backmerge Linux 5.13-rc7 to make some pulls from later bases apply,
and to bake in the conflicts so far.

Merge tag 'v5.13-rc7' into rdma.git for-next

Linux 5.13-rc7

Needed for dependencies in following patches. Merge conflict in rxe_cmop.c
resolved by compining both patches.

Signed-off-by: Jason Gunt

Merge tag 'v5.13-rc7' into rdma.git for-next

Linux 5.13-rc7

Needed for dependencies in following patches. Merge conflict in rxe_cmop.c
resolved by compining both patches.

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

Merge series "Extend regulator notification support" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

Extend regulator notification support

This series extends the regulator notification a

Merge series "Extend regulator notification support" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

Extend regulator notification support

This series extends the regulator notification and error flag support.
Initial discussion on the topic can be found here:
https://lore.kernel.org/lkml/6046836e22b8252983f08d5621c35ececb97820d.camel@fi.rohmeurope.com/

In a nutshell - the series adds:

1. WARNING level events/error flags. (Patch 3)
Current regulator 'ERROR' event notifications for over/under
voltage, over current and over temperature are used to indicate
condition where monitored entity is so badly "off" that it actually
indicates a hardware error which can not be recovered. The most
typical hanling for that is believed to be a (graceful)
system-shutdown. Here we add set of 'WARNING' level flags to allow
sending notifications to consumers before things are 'that badly off'
so that consumer drivers can implement recovery-actions.
2. Device-tree properties for specifying limit values. (Patches 1, 5)
Add limits for above mentioned 'ERROR' and 'WARNING' levels (which
send notifications to consumers) and also for a 'PROTECTION' level
(which will be used to immediately shut-down the regulator(s) W/O
informing consumer drivers. Typically implemented by hardware).
Property parsing is implemented in regulator core which then calls
callback operations for limit setting from the IC drivers. A
warning is emitted if protection is requested by device tree but the
underlying IC does not support configuring requested protection.
3. Helpers which can be registered by IC. (Patch 4)
Target is to avoid implementing IRQ handling and IRQ storm protection
in each IC driver. (Many of the ICs implementin these IRQs do not allow
masking or acking the IRQ but keep the IRQ asserted for the whole
duration of problem keeping the processor in IRQ handling loop).
4. Emergency poweroff function (refactored out of the thermal_core to
kernel/reboot.c) which is called if IC fires error IRQs but IC reading
fails and given retry-count is exceeded. (Patches 2, 4)
Please note that the mutex in the emergency shutdown was replaced by a
simple atomic in order to allow call from any context.

The helper was attempted to be done so it could be used to implement
roughly same logic as is used in qcom-labibb regulator. This means
amongst other things a safety shut-down if IC registers are not readable.
Using these shut-down retry counters are optional. The idea is that the
helper could be also used by simpler ICs which do not provide status
register(s) which can be used to check if error is still active.

ICs which do not have such status register can simply omit the 'renable'
callback (and retry-counts etc) - and helper assumes the situation is Ok
and re-enables IRQ after given time period. If problem persists the
handler is ran again and another notification is sent - but at least the
delay allows processor to avoid IRQ loop.

Patch 7 takes this notification support in use at BD9576MUF.
Patch 8 is related to MFD change which is not really related to the RFC
here. It was added to this series in order to avoid potential conflicts.
Patch 9 adds a maintainers entry.

Changelog v10-RESEND:
- rebased on v5.13-rc4
Changelog v10:
- rebased on v5.13-rc2
- Move rdev_*() print macros to the internal.h and use rdev_dbg()
from irq_helpers.c
- Export rdev_get_name() and move it from coupler.h to driver.h for
others to use. (It was already in coupler.h but not exported -
usage was limited and coupler.h does not sound like optimal place
as rdev_name is not only used by coupled regulators)
- Send all regulator notifications from irq_helpers.c at one OR'd
event for the sake of simplicity. For BD9576 this does not matter
as it has own IRQ for each event case. Header defining events says
they may be OR'd.
- Change WARN() at protection shutdown to pr_emerg as suggested by
Petr.
Changelog v9:
- rebases on v5.13-rc1
- Update thermal documentation
- Fix regulator notification event number
Changelog v8:
- split shutdown API adding and thermal core taking it in use to
own patches.
- replace the spinlock with atomic when ensuring the emergency
shutdown is only called once.
Changelog v7:
general:
- rebased on v5.12-rc7
- new patch for refactoring the hw-failure reboot logic out of
thermal_core.c for others to use.
notification helpers:
- fix regulator error_flags query
- grammar/typos
- do not BUG() but attempt to shut-down the system
- use BITS_PER_TYPE()

Changelog v6:
Add MAINTAINERS entry
Changes to IRQ notifiers
- move devm functions to drivers/regulator/devres.c
- drop irq validity check
- use devm_add_action_or_reset()
- fix styling issues
- fix kerneldocs

Changelog v5:
- Fix the badly formatted pr_emerg() call.

Changelog v4:
- rebased on v5.12-rc6
- dropped RFC
- fix external FET DT-binding.
- improve prints for cases when expecting HW failure.
- styling and typos

Changelog v3:
Regulator core:
- Fix dangling pointer access at regulator_irq_helper()
stpmic1_regulator:
- fix function prototype (compile error)
bd9576-regulator:
- Update over current limits to what was given in new data-sheet
(REV00K)
- Allow over-current monitoring without external FET. Set limits to
values given in data-sheet (REV00K).

Changelog v2:
Generic:
- rebase on v5.12-rc2 + BD9576 series
- Split devm variant of delayed wq to own series
Regulator framework:
- Provide non devm variant of IRQ notification helpers
- shorten dt-property names as suggested by Rob
- unconditionally call map_event in IRQ handling and require it to be
populated
BD9576 regulators:
- change the FET resistance property to micro-ohms
- fix voltage computation in OC limit setting

show more ...

Merge tag 'v5.13-rc3' into asoc-5.13

Linux 5.13-rc3

Merge branch 'rafael/acpica/cfmws' into for-5.14/cxl

Pick up the definition of the CXL Fixed Memory Window Structure from
Rafael's ACPICA development branch.

Merge tag 'v5.13-rc5' into x86/cleanups

Pick up dependent changes in order to base further cleanups ontop.

Signed-off-by: Borislav Petkov <bp@suse.de>

Merge branch 'sched/urgent' into sched/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v5.13-rc4' into media_tree

Linux 5.13-rc4

* tag 'v5.13-rc4': (976 commits)
Linux 5.13-rc4
seccomp: Refactor notification handler to prepare for new semantics
selftests: kvm: fix ov

Merge tag 'v5.13-rc4' into media_tree

Linux 5.13-rc4

* tag 'v5.13-rc4': (976 commits)
Linux 5.13-rc4
seccomp: Refactor notification handler to prepare for new semantics
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
Documentation: seccomp: Fix user notification documentation
MAINTAINERS: adjust to removing i2c designware platform data
perf vendor events powerpc: Fix eventcode of power10 JSON events
Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
perf stat: Fix error check for bpf_program__attach
cifs: change format of CIFS_FULL_KEY_DUMP ioctl
i2c: i801: Don't generate an interrupt on bus reset
i2c: mpc: implement erratum A-004447 workaround
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
...

show more ...

Merge drm/drm-next into drm-intel-gt-next

Pulling in -rc2 fixes and TTM changes that next upcoming patches depend
on.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>