Merge drm/drm-next into drm-intel-next

Sync up with topic/i915-gem-next and drm-intel-gt-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge series "Support ROHM BD71815 PMIC" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

Patch series introducing support for ROHM BD71815 PMIC

ROHM BD71815 is a power management IC used

Merge series "Support ROHM BD71815 PMIC" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

Patch series introducing support for ROHM BD71815 PMIC

ROHM BD71815 is a power management IC used in some battery powered
systems. It contains regulators, GPO(s), charger + coulomb counter, RTC
and a clock gate.

All regulators can be controlled via I2C. LDO4 can additionally be set to
be enabled/disabled by a GPIO. LDO3 voltage could be selected from two
voltages written into separate VSEL reisters using GPIO but this mode is
not supported by driver. On top of that the PMIC has the typical HW
state machine which is present also on many other ROHM PMICs.

IC contains two GPOs - but one of the GPOs is marked as GND in
data-sheet. Thus the driver by default only exposes one GPO. The second
GPO can be enabled by special DT property.

RTC is almost similar to what is on BD71828. For currently used features
only the register address offset to RTC block differs.

The charger driver is not included in this series. ROHM has a charger
driver with some fuel-gauging logig written in but this is not included
here. I am working on separating the logic from HW specific driver and
supporting both BD71815 and BD71828 chargers in separate patch series.

Changelog v5:
Regulator:
- Added regmap helper for regulator ramp-delay and taken it in use
(patches 13, 14, 16 - they can be just dropped if ramp-delay helper is not
a good idea. Patch 15 implements old-fashioned ramp-delay)
GPIO:
- styling changes to GPIO (Mostly suggested by Andy)
- implemented init_valid_mask (but can't count on it yet)
Changelog v4:
- Sorted ROHM chip ID enum
- Statcized DVS structures in regulator driver
- Minor styling for regulator driver
- rebased on v5.12-rc4
Changelog v3:
- GPIO clean-up as suggested by Bartosz
- MFD clean-up as suggested by Lee
- clk-mode dt-binding handling in MFD driver corrected to reflect new
property values.
- Dropped already applied patches
- Rebased on v5.12-rc2
Changelog v2:
- Rebased on top of v5.11-rc3
- Added another "preliminary patch" which fixes HW-dvs voltage
handling (patch 1)
- split regulator patch to two.
- changed dt-binding patch ordering.
regulators:
- staticized probe
- removed some unnecessary defines
- updated comments
- split rohm-regulator patch adding SNVS and supporting simple
linear mapping into two - one adding support for mapping, other
adding SNVS.
GPIO:
- removed unnecessary headers
- clarified dev/parent->dev usage
- removed forgotten #define DEBUG
dt-bindings:
- changed patch order to meet ref-dependencies
- added missing regulator nodes
- changed string property for clk mode to tristated
MFD:
- header cleanups.
CLK:
- fixed commit message

--

Matti Vaittinen (19):
rtc: bd70528: Do not require parent data
mfd: bd718x7: simplify by cleaning unnecessary device data
dt_bindings: bd71828: Add clock output mode
dt_bindings: regulator: Add ROHM BD71815 PMIC regulators
dt_bindings: mfd: Add ROHM BD71815 PMIC
mfd: Add ROHM BD71815 ID
mfd: Sort ROHM chip ID list for better readability
mfd: Support for ROHM BD71815 PMIC core
gpio: support ROHM BD71815 GPOs
regulator: helpers: Export helper voltage listing
regulator: rohm-regulator: linear voltage support
regulator: rohm-regulator: Support SNVS HW state.
regulator: Add regmap helper for ramp-delay setting
regulator: bd718x7, bd71828: Use ramp-delay helper
regulator: Support ROHM BD71815 regulators
regulator: bd71815: use ramp-delay helper
clk: bd718x7: Add support for clk gate on ROHM BD71815 PMIC
rtc: bd70528: Support RTC on ROHM BD71815
MAINTAINERS: Add ROHM BD71815AGW

.../bindings/mfd/rohm,bd71815-pmic.yaml | 201 ++++++
.../bindings/mfd/rohm,bd71828-pmic.yaml | 6 +
.../regulator/rohm,bd71815-regulator.yaml | 116 ++++
MAINTAINERS | 3 +
drivers/clk/clk-bd718x7.c | 9 +-
drivers/gpio/Kconfig | 10 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-bd71815.c | 193 ++++++
drivers/mfd/Kconfig | 15 +-
drivers/mfd/rohm-bd71828.c | 486 +++++++++----
drivers/mfd/rohm-bd718x7.c | 43 +-
drivers/regulator/Kconfig | 11 +
drivers/regulator/Makefile | 1 +
drivers/regulator/bd71815-regulator.c | 651 ++++++++++++++++++
drivers/regulator/bd71828-regulator.c | 51 +-
drivers/regulator/bd718x7-regulator.c | 60 +-
drivers/regulator/helpers.c | 101 ++-
drivers/regulator/rohm-regulator.c | 23 +-
drivers/rtc/Kconfig | 6 +-
drivers/rtc/rtc-bd70528.c | 104 +--
include/linux/mfd/rohm-bd71815.h | 562 +++++++++++++++
include/linux/mfd/rohm-bd71828.h | 3 +
include/linux/mfd/rohm-bd718x7.h | 13 -
include/linux/mfd/rohm-generic.h | 15 +-
include/linux/regulator/driver.h | 7 +
25 files changed, 2393 insertions(+), 298 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
create mode 100644 drivers/gpio/gpio-bd71815.c
create mode 100644 drivers/regulator/bd71815-regulator.c
create mode 100644 include/linux/mfd/rohm-bd71815.h

base-commit: 0d02ec6b3136c73c09e7859f0d0e4e2c4c07b49b
--
2.25.4

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]

show more ...

Merge tag 'mute-led-rework' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.13

ALSA: control - add generic LED API

This patchset tries to resolve the diversity in the aud

Merge tag 'mute-led-rework' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.13

ALSA: control - add generic LED API

This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.

A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).

The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.

The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).

snd_ctl_led 24576 0

The sound driver implementation is really easy:

1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED

Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge tag 'tags/mute-led-rework' into for-next

ALSA: control - add generic LED API

This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer

Merge tag 'tags/mute-led-rework' into for-next

ALSA: control - add generic LED API

This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.

A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).

The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.

The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).

snd_ctl_led 24576 0

The sound driver implementation is really easy:

1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED

Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge tag 'v5.12-rc4' into next

Sync up with the mainline to bring in newest APIs.

Merge tag 'v5.12-rc3' into kvm-arm64/host-stage2

Linux 5.12-rc3

Signed-off-by: Marc Zyngier <maz@kernel.org>

# gpg: Signature made Sun 14 Mar 2021 21:41:02 GMT
# gpg: using RSA key

Merge tag 'v5.12-rc3' into kvm-arm64/host-stage2

Linux 5.12-rc3

Signed-off-by: Marc Zyngier <maz@kernel.org>

# gpg: Signature made Sun 14 Mar 2021 21:41:02 GMT
# gpg: using RSA key ABAF11C65A2970B130ABE3C479BE3E4300411886
# gpg: issuer "torvalds@linux-foundation.org"
# gpg: Can't check signature: No public key

show more ...

Merge branch 'locking/urgent' into locking/core, to pick up dependent commits

We are applying further, lower-prio fixes on top of two ww_mutex fixes in locking/urgent.

Signed-off-by: Ingo Molnar <m

Merge branch 'locking/urgent' into locking/core, to pick up dependent commits

We are applying further, lower-prio fixes on top of two ww_mutex fixes in locking/urgent.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge tag 'v5.12-rc3' into x86/seves

Pick up dependent SEV-ES urgent changes which went into -rc3 to base new
work ontop.

Signed-off-by: Borislav Petkov <bp@suse.de>

Merge tag 'v5.12-rc3' into x86/cleanups, to refresh the tree

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-misc-next

Noralf needs some patches in 5.12-rc3, and we've been delaying the 5.12
merge due to the swap issue so it looks like a good time.

Signed-off-by: Maxime Ripard

Merge drm/drm-next into drm-misc-next

Noralf needs some patches in 5.12-rc3, and we've been delaying the 5.12
merge due to the swap issue so it looks like a good time.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

show more ...

Merge tag 'v5.12-rc3' into x86/core

Pick up dependent SEV-ES urgent changes to base new work ontop.

Signed-off-by: Borislav Petkov <bp@suse.de>

Merge 5.12-rc3 into usb-next

We want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.12-rc3 into tty-next

Resolves a merge issue with:
drivers/tty/hvc/hvcs.c
and we want the tty/serial fixes from 5.12-rc3 in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoun

Merge 5.12-rc3 into tty-next

Resolves a merge issue with:
drivers/tty/hvc/hvcs.c
and we want the tty/serial fixes from 5.12-rc3 in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge v5.12-rc3 into char-misc-next

We need the char/misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.12-rc3 into staging-next

We need the staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up the fixes sent for v5.12 and continue development based on
v5.12-rc2, i.e. without the swap on file bug.

This also gets a sl

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up the fixes sent for v5.12 and continue development based on
v5.12-rc2, i.e. without the swap on file bug.

This also gets a slightly newer and better tools/perf/arch/arm/util/cs-etm.c
patch version, using the BIT() macro, that had already been slated to
v5.13 but ended up going to v5.12-rc1 on an older version.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'perf-tools-fixes-for-v5.12-2020-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:
"Perf tool fixes:

- Fix wrong

Merge tag 'perf-tools-fixes-for-v5.12-2020-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:
"Perf tool fixes:

- Fix wrong skipping for per-die aggregation in 'perf stat'.

- Fix race in signal handling on large core count machines, setting
up signal handlers earlier.

- Fix -F for branch & mem modes in 'perf report'.

- Fix the condition checks for max number of NUMA nodes in 'perf
bench numa'.

- Fix crash in 'perf diff' error path.

- Fix filtering of empty build-ids in 'perf archive'.

- Ensure read cmdlines from libtraceevent are null terminated.

Recent regressions:

- Fix control fifo permissions in 'perf daemon'.

- Fix 'perf daemon' compile error with ASAN.

- Fix running 'perf daemon' test for non root user.

- Fix PERF_SAMPLE_WEIGHT_STRUCT 'perf test' failure on non-x86
arches.

- Fix event's PMU name parsing related to new drm/i915/gt
software-gt-awake-time event.

Fixes from compiler instrumentation:

- Fix leaks in 'perf test' entries, found using ASAN.

- Fix use-after-free when 'perf stat -r' option is used.

Arch specific:

- Fix bitmap for option om ARM's CS-ETM.

Documentation:

- Fix documentation of verbose options.

Build:

- Clean 'generated' directory used for creating the syscall table on
x86.

- Fix ccache usage in $(CC) when generating arch errno table.

- Cast (struct timeval).tv_sec when printing, fixing the build with
MUSL libc.

- Tighten snprintf() string precision to pass gcc check on some
32-bit arches.

- Update UAPI copies from the kernel sources.

- Fix regression on feature detection 'make clean' target"

* tag 'perf-tools-fixes-for-v5.12-2020-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (44 commits)
perf cs-etm: Fix bitmap for option
perf trace: Fix race in signal handling
perf map: Tighten snprintf() string precision to pass gcc check on some 32-bit arches
perf report: Fix -F for branch & mem modes
perf tests x86: Move insn.h include to make sure it finds stddef.h
perf test: Support the ins_lat check in the X86 specific test
perf test: Fix sample-parsing failure on non-x86 platforms
perf archive: Fix filtering of empty build-ids
perf daemon: Fix compile error with Asan
perf stat: Fix use-after-free when -r option is used
libperf: Add perf_evlist__reset_id_hash()
perf stat: Fix wrong skipping for per-die aggregation
tools headers UAPI: Sync KVM's kvm.h and vmx.h headers with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Update tools' copy of linux/coresight-pmu.h
tools headers: Update syscall.tbl files to support mount_setattr
perf test: Fix cpu and thread map leaks in perf_time_to_tsc test
perf test: Fix cpu map leaks in cpu_map_print test
perf test: Fix a memory leak in thread_map_remove test
perf test: Fix a thread map leak in thread_map_synthesize test
...

show more ...

perf test: Support the ins_lat check in the X86 specific test

The ins_lat of PERF_SAMPLE_WEIGHT_STRUCT stands for the instruction
latency, which is only available for X86. Add a X86 specific test fo

perf test: Support the ins_lat check in the X86 specific test

The ins_lat of PERF_SAMPLE_WEIGHT_STRUCT stands for the instruction
latency, which is only available for X86. Add a X86 specific test for
the ins_lat and PERF_SAMPLE_WEIGHT_STRUCT type.

The test__x86_sample_parsing() uses the same way as the
test__sample_parsing() to verify a sample type. Since the ins_lat and
PERF_SAMPLE_WEIGHT_STRUCT are the only X86 specific sample type for now,
the test__x86_sample_parsing() only verify the PERF_SAMPLE_WEIGHT_STRUCT
type. Other sample types are still verified in the generic test.

$ perf test 77 -v
77: x86 Sample parsing :
--- start ---
test child forked, pid 102370
test child finished with 0
---- end ----
x86 Sample parsing: Ok

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1614787285-104151-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge remote-tracking branch 'net/master'

Merge branches 'rgrp-glock-sharing' and 'gfs2-revoke' from https://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2.git

Merge the resource group glock sharing feature and the revoke accountin

Merge branches 'rgrp-glock-sharing' and 'gfs2-revoke' from https://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2.git

Merge the resource group glock sharing feature and the revoke accounting rework.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

show more ...

Merge branch 'for-5.12/google' into for-linus

- User experience improvements for hid-google from Nicolas Boichat

Merge branch 'next' into for-linus

Prepare input updates for 5.12 merge window.

Merge tag 'v5.11' into next

Merge with mainline to get latest APIs and device tree bindings.

Merge tag 'amba-make-remove-return-void' of https://git.pengutronix.de/git/ukl/linux into devel-stable

Tag for adaptions to struct amba_driver::remove changing prototype

Merge branch 'cpuidle-fix' into fixes