objtool: Combine UNWIND_HINT_RET_OFFSET and UNWIND_HINT_FUNC

The ORC metadata generated for UNWIND_HINT_FUNC isn't actually very
func-like. With certain usages it can cause stack state mismatches
b

objtool: Combine UNWIND_HINT_RET_OFFSET and UNWIND_HINT_FUNC

The ORC metadata generated for UNWIND_HINT_FUNC isn't actually very
func-like. With certain usages it can cause stack state mismatches
because it doesn't set the return address (CFI_RA).

Also, users of UNWIND_HINT_RET_OFFSET no longer need to set a custom
return stack offset. Instead they just need to specify a func-like
situation, so the current ret_offset code is hacky for no good reason.

Solve both problems by simplifying the RET_OFFSET handling and
converting it into a more useful UNWIND_HINT_FUNC.

If we end up needing the old 'ret_offset' functionality again in the
future, we should be able to support it pretty easily with the addition
of a custom 'sp_offset' in UNWIND_HINT_FUNC.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/db9d1f5d79dddfbb3725ef6d8ec3477ad199948d.1611263462.git.jpoimboe@redhat.com

show more ...

objtool: Fix retpoline detection in asm code

The JMP_NOSPEC macro branches to __x86_retpoline_*() rather than the
__x86_indirect_thunk_*() wrappers used by C code. Detect jumps to
__x86_retpoline_*

objtool: Fix retpoline detection in asm code

The JMP_NOSPEC macro branches to __x86_retpoline_*() rather than the
__x86_indirect_thunk_*() wrappers used by C code. Detect jumps to
__x86_retpoline_*() as retpoline dynamic jumps.

Presumably this doesn't trigger a user-visible bug. I only found it
when testing vmlinux.o validation.

Fixes: 39b735332cb8 ("objtool: Detect jumps to retpoline thunks")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/31f5833e2e4f01e3d755889ac77e3661e906c09f.1611263461.git.jpoimboe@redhat.com

show more ...

objtool: Support stack layout changes in alternatives

The ORC unwinder showed a warning [1] which revealed the stack layout
didn't match what was expected. The problem was that paravirt patching
ha

objtool: Support stack layout changes in alternatives

The ORC unwinder showed a warning [1] which revealed the stack layout
didn't match what was expected. The problem was that paravirt patching
had replaced "CALL *pv_ops.irq.save_fl" with "PUSHF;POP". That changed
the stack layout between the PUSHF and the POP, so unwinding from an
interrupt which occurred between those two instructions would fail.

Part of the agreed upon solution was to rework the custom paravirt
patching code to use alternatives instead, since objtool already knows
how to read alternatives (and converging runtime patching infrastructure
is always a good thing anyway). But the main problem still remains,
which is that runtime patching can change the stack layout.

Making stack layout changes in alternatives was disallowed with commit
7117f16bf460 ("objtool: Fix ORC vs alternatives"), but now that paravirt
is going to be doing it, it needs to be supported.

One way to do so would be to modify the ORC table when the code gets
patched. But ORC is simple -- a good thing! -- and it's best to leave
it alone.

Instead, support stack layout changes by "flattening" all possible stack
states (CFI) from parallel alternative code streams into a single set of
linear states. The only necessary limitation is that CFI conflicts are
disallowed at all possible instruction boundaries.

For example, this scenario is allowed:

Alt1 Alt2 Alt3

0x00 CALL *pv_ops.save_fl CALL xen_save_fl PUSHF
0x01 POP %RAX
0x02 NOP
...
0x05 NOP
...
0x07 <insn>

The unwind information for offset-0x00 is identical for all 3
alternatives. Similarly offset-0x05 and higher also are identical (and
the same as 0x00). However offset-0x01 has deviating CFI, but that is
only relevant for Alt3, neither of the other alternative instruction
streams will ever hit that offset.

This scenario is NOT allowed:

Alt1 Alt2

0x00 CALL *pv_ops.save_fl PUSHF
0x01 NOP6
...
0x07 NOP POP %RAX

The problem here is that offset-0x7, which is an instruction boundary in
both possible instruction patch streams, has two conflicting stack
layouts.

[ The above examples were stolen from Peter Zijlstra. ]

The new flattened CFI array is used both for the detection of conflicts
(like the second example above) and the generation of linear ORC
entries.

BTW, another benefit of these changes is that, thanks to some related
cleanups (new fake nops and alt_group struct) objtool can finally be rid
of fake jumps, which were a constant source of headaches.

[1] https://lkml.kernel.org/r/20201111170536.arx2zbn4ngvjoov7@treble

Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>

show more ...

objtool: Add 'alt_group' struct

Create a new struct associated with each group of alternatives
instructions. This will help with the removal of fake jumps, and more
importantly with adding support

objtool: Add 'alt_group' struct

Create a new struct associated with each group of alternatives
instructions. This will help with the removal of fake jumps, and more
importantly with adding support for stack layout changes in
alternatives.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>

show more ...

objtool: Refactor ORC section generation

Decouple ORC entries from instructions. This simplifies the
control/data flow, and is going to make it easier to support alternative
instructions which chan

objtool: Refactor ORC section generation

Decouple ORC entries from instructions. This simplifies the
control/data flow, and is going to make it easier to support alternative
instructions which change the stack layout.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>

show more ...

objtool: Rework header include paths

Currently objtool headers are being included either by their base name
or included via ../ from a parent directory. In case of a base name usage:

#include "war

objtool: Rework header include paths

Currently objtool headers are being included either by their base name
or included via ../ from a parent directory. In case of a base name usage:

#include "warn.h"
#include "arch_elf.h"

it does not make it apparent from which directory the file comes from.
To make it slightly better, and actually to avoid name clashes some arch
specific files have "arch_" suffix. And files from an arch folder have
to revert to including via ../ e.g:
#include "../../elf.h"

With additional architectures support and the code base growth there is
a need for clearer headers naming scheme for multiple reasons:
1. to make it instantly obvious where these files come from (objtool
itself / objtool arch|generic folders / some other external files),
2. to avoid name clashes of objtool arch specific headers, potential
obtool arch generic headers and the system header files (there is
/usr/include/elf.h already),
3. to avoid ../ includes and improve code readability.
4. to give a warm fuzzy feeling to developers who are mostly kernel
developers and are accustomed to linux kernel headers arranging
scheme.

Doesn't this make it instantly obvious where are these files come from?

#include <objtool/warn.h>
#include <arch/elf.h>

And doesn't it look nicer to avoid ugly ../ includes? Which also
guarantees this is elf.h from the objtool and not /usr/include/elf.h.

#include <objtool/elf.h>

This patch defines and implements new objtool headers arranging
scheme. Which is:
- all generic headers go to include/objtool (similar to include/linux)
- all arch headers go to arch/$(SRCARCH)/include/arch (to get arch
prefix). This is similar to linux arch specific "asm/*" headers but we
are not abusing "asm" name and calling it what it is. This also helps
to prevent name clashes (arch is not used in system headers or kernel
exports).

To bring objtool to this state the following things are done:
1. current top level tools/objtool/ headers are moved into
include/objtool/ subdirectory,
2. arch specific headers, currently only arch/x86/include/ are moved into
arch/x86/include/arch/ and were stripped of "arch_" suffix,
3. new -I$(srctree)/tools/objtool/include include path to make
includes like <objtool/warn.h> possible,
4. rewriting file includes,
5. make git not to ignore include/objtool/ subdirectory.

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>

show more ...