Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Support usec resolution of TCP timest

Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Support usec resolution of TCP timestamps, enabled selectively by a
route attribute.

- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).

- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality

- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.

- Add more retransmission timeout (RTO) related statistics to
TCP_INFO.

- Support sending fragmented skbs over vsock sockets.

- Make sure we send SIGPIPE for vsock sockets if socket was
shutdown().

- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.

- Add sysctl to control activation of TCP ping-pong mode.

- Add sysctl to make connection timeout in MPTCP configurable.

- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.

- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.

- Support selective FDB flushing in the VXLAN tunnel driver.

- Allow limiting learned FDB entries in bridges, prevent OOM attacks.

- Allow controlling via configfs netconsole targets which were
created via the kernel cmdline at boot, rather than via configfs at
runtime.

- Support multiple PTP timestamp event queue readers with different
filters.

- MCTP over I3C.

BPF:

- Add new veth-like netdevice where BPF program defines the logic of
the xmit routine. It can operate in L3 and L2 mode.

- Support exceptions - allow asserting conditions which should never
be true but are hard for the verifier to infer. With some extra
flexibility around handling of the exit / failure:

https://lwn.net/Articles/938435/

- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on the
value for the current CPU.

This allows to deprecate local one-off implementations of per-CPU
storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.

- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.

- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.

- Add open-coded task, css_task and css iterator support. One of the
use cases is customizable OOM victim selection via BPF.

- Allow source address selection with bpf_*_fib_lookup().

- Add ability to pin BPF timer to the current CPU.

- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.

- Add missed stats for kprobes to retrieve the number of missed
kprobe executions and subsequent executions of BPF programs.

- Inherit system settings for CPU security mitigations.

- Add BPF v4 CPU instruction support for arm32 and s390x.

Changes to common code:

- overflow: add DEFINE_FLEX() for on-stack definition of structs with
flexible array members.

- Process doc update with more guidance for reviewers.

Driver API:

- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.

- Create a common DPLL configuration API. Allow configuring and
querying state of PLL circuits used for clock syntonization, in
network time distribution.

- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.

- Rework PHY state machine to avoid races with calls to phy_stop().

- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC
addresses.

- Allow antenna control on injected WiFi frames.

- Reduce the number of variants of napi_schedule().

- Simplify error handling when composing devlink health messages.

Misc:

- A lot of KCSAN data race "fixes", from Eric.

- A lot of __counted_by() annotations, from Kees.

- A lot of strncpy -> strscpy and printf format fixes.

- Replace master/slave terminology with conduit/user in DSA drivers.

- Handful of KUnit tests for netdev and WiFi core.

Removed:

- AppleTalk COPS.

- AppleTalk ipddp.

- TI AR7 CPMAC Ethernet driver.

Drivers:

- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload

- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)

- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block
selection for IPv6 multicast forwarding and ordering of blocks
in ACL region

- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port

- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking

- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers

- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support

- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend"

* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
net: mana: Use xdp_set_features_flag instead of direct assignment
vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
iavf: delete the iavf client interface
iavf: add a common function for undoing the interrupt scheme
iavf: use unregister_netdev
iavf: rely on netdev's own registered state
iavf: fix the waiting time for initial reset
iavf: in iavf_down, don't queue watchdog_task if comms failed
iavf: simplify mutex_trylock+sleep loops
iavf: fix comments about old bit locks
doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
tools: ynl: introduce option to process unknown attributes or types
ipvlan: properly track tx_errors
netdevsim: Block until all devices are released
nfp: using napi_build_skb() to replace build_skb()
net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
...

show more ...

Merge tag 'nfsd-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux

Pull nfsd updates from Chuck Lever:
"This release completes the SunRPC thread scheduler work that was begun
in v6.6

Merge tag 'nfsd-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux

Pull nfsd updates from Chuck Lever:
"This release completes the SunRPC thread scheduler work that was begun
in v6.6. The scheduler can now find an svc thread to wake in constant
time and without a list walk. Thanks again to Neil Brown for this
overhaul.

Lorenzo Bianconi contributed infrastructure for a netlink-based NFSD
control plane. The long-term plan is to provide the same functionality
as found in /proc/fs/nfsd, plus some interesting additions, and then
migrate the NFSD user space utilities to netlink.

A long series to overhaul NFSD's NFSv4 operation encoding was applied
in this release. The goals are to bring this family of encoding
functions in line with the matching NFSv4 decoding functions and with
the NFSv2 and NFSv3 XDR functions, preparing the way for better memory
safety and maintainability.

A further improvement to NFSD's write delegation support was
contributed by Dai Ngo. This adds a CB_GETATTR callback, enabling the
server to retrieve cached size and mtime data from clients holding
write delegations. If the server can retrieve this information, it
does not have to recall the delegation in some cases.

The usual panoply of bug fixes and minor improvements round out this
release. As always I am grateful to all contributors, reviewers, and
testers"

* tag 'nfsd-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (127 commits)
svcrdma: Fix tracepoint printk format
svcrdma: Drop connection after an RDMA Read error
NFSD: clean up alloc_init_deleg()
NFSD: Fix frame size warning in svc_export_parse()
NFSD: Rewrite synopsis of nfsd_percpu_counters_init()
nfsd: Clean up errors in nfs3proc.c
nfsd: Clean up errors in nfs4state.c
NFSD: Clean up errors in stats.c
NFSD: simplify error paths in nfsd_svc()
NFSD: Clean up nfsd4_encode_seek()
NFSD: Clean up nfsd4_encode_offset_status()
NFSD: Clean up nfsd4_encode_copy_notify()
NFSD: Clean up nfsd4_encode_copy()
NFSD: Clean up nfsd4_encode_test_stateid()
NFSD: Clean up nfsd4_encode_exchange_id()
NFSD: Clean up nfsd4_do_encode_secinfo()
NFSD: Clean up nfsd4_encode_access()
NFSD: Clean up nfsd4_encode_readdir()
NFSD: Clean up nfsd4_encode_entry4()
NFSD: Add an nfsd4_encode_nfs_cookie4() helper
...

show more ...

tools: ynl: Add source files for nfsd netlink protocol

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

tools: ynl: use ynl-gen -o instead of stdout in Makefile

Jiri added more careful handling of output of the code generator
to avoid wiping out existing files in
commit f65f305ae008 ("tools: ynl-gen:

tools: ynl: use ynl-gen -o instead of stdout in Makefile

Jiri added more careful handling of output of the code generator
to avoid wiping out existing files in
commit f65f305ae008 ("tools: ynl-gen: use temporary file for rendering")
Make use of the -o option in the Makefiles, it is already used
by ynl-regen.sh.

Link: https://lore.kernel.org/r/20231010202714.4045168-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'ynl-makefile-cleanup'

Jakub Kicinski says:

====================
ynl Makefile cleanup

While catching up on recent changes I noticed unexpected
changes to Makefiles in YNL. Indeed they

Merge branch 'ynl-makefile-cleanup'

Jakub Kicinski says:

====================
ynl Makefile cleanup

While catching up on recent changes I noticed unexpected
changes to Makefiles in YNL. Indeed they were not working
as intended but the fixes put in place were not what I had
in mind :)
====================

Link: https://lore.kernel.org/r/20231003153416.2479808-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: don't regen on every make

As far as I can tell the normal Makefile dependency tracking
works, generated files get re-generated if the YAML was updated.
Let make do its job, don't force t

tools: ynl: don't regen on every make

As far as I can tell the normal Makefile dependency tracking
works, generated files get re-generated if the YAML was updated.
Let make do its job, don't force the re-generation.
make hardclean can be used to force regeneration.

Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231003153416.2479808-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'v6.5' into next

Sync up with mainline to bring in updates to the shared infrastructure.

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work fo

Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.

Core:

- Rework the sendpage & splice implementations

Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES

Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is

Remove the MSG_SENDPAGE_NOTLAST flag completely

- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid

- Enable socket busy polling with CONFIG_RT

- Improve reliability and efficiency of reporting for ref_tracker

- Auto-generate a user space C library for various Netlink families

Protocols:

- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]

- Use per-VMA locking for "page-flipping" TCP receive zerocopy

- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags

- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative

- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)

- Avoid waking up applications using TLS sockets until we have a full
record

- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring

- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address

- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch

- PPPoE: make number of hash bits configurable

- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)

- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)

- Support matching on Connectivity Fault Management (CFM) packets

- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug

- HSR: don't enable promiscuous mode if device offloads the proto

- Support active scanning in IEEE 802.15.4

- Continue work on Multi-Link Operation for WiFi 7

BPF:

- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators

- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything

- Accept dynptr memory as memory arguments passed to helpers

- Add routing table ID to bpf_fib_lookup BPF helper

- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands

- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)

- Show target_{obj,btf}_id in tracing link fdinfo

- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs

Netfilter:

- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value

- Increase ip_vs_conn_tab_bits range for 64BIT builds

- Allow updating size of a set

- Improve NAT tuple selection when connection is closing

Driver API:

- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)

- Support configuring rate selection pins of SFP modules

- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines

- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer

- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)

- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message

- Split devlink instance and devlink port operations

New hardware / drivers:

- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver

- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE

- CAN:
- Fintek F81604

Drivers:

- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10

- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)

- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of

- CAN: Kvaser PCIEcan:
- support packet timestamping

- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"

* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...

show more ...

tools: ynl: work around stale system headers

The inability to include the uAPI headers directly in tools/
is one of the bigger annoyances of compiling user space code.
Most projects trade the pain f

tools: ynl: work around stale system headers

The inability to include the uAPI headers directly in tools/
is one of the bigger annoyances of compiling user space code.
Most projects trade the pain for smaller inconvenience of having
to copy the headers under tools/include.

In case of netlink headers I think that we can avoid both.
Netlink family headers are simple and should be self-contained.
We can try to twiddle the Makefile a little to force-include
just the family header, and use system headers for the rest.

This works fairly well. There are two warts - for some reason
if we specify -include $path/family.h as a compilation flag,
the #ifdef header guard does not seem to work. So we need
to throw the guard in on the command line as well. Seems like
GCC detects that the header is different and tries to include
both. Second problem is that make wants hash sign to be escaped
or not depending on the version. Sigh.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'ynl-ethtool'

Jakub Kicinski says:

====================
tools: ynl: generate code for the ethtool family

And finally ethtool support. Thanks to Stan's work the ethtool family
spec is

Merge branch 'ynl-ethtool'

Jakub Kicinski says:

====================
tools: ynl: generate code for the ethtool family

And finally ethtool support. Thanks to Stan's work the ethtool family
spec is quite complete, so there is a lot of operations to support.

I chickened out of stats-get support, they require at the very least
type-value support on a u64 scalar. Type-value is an arrangement where
a u16 attribute is encoded directly in attribute type. Code gen can
support this if the inside is a nest, we just throw in an extra
field into that nest to carry the attr type. But a little more coding
is needed to for a scalar, because first we need to turn the scalar
into a struct with one member, then we can add the attr type.

Other than that ethtool required event support (notification which
does not share contents with any GET), but the previous series
already added that to the codegen.

I haven't tested all the ops here, and a few I tried seem to work.
====================

Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

tools: ynl: generate code for the ethtool family

Generate the protocol code for ethtool. Skip the stats
for now, they are the only outlier in terms of complexity.
Stats are a sort-of semi-polymorphi

tools: ynl: generate code for the ethtool family

Generate the protocol code for ethtool. Skip the stats
for now, they are the only outlier in terms of complexity.
Stats are a sort-of semi-polymorphic (attr space of a nest
depends on value of another attr) or a type-value-scalar,
depending on how one wants to look at it...
A challenge for another time.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'tools-ynl-generate-code-for-the-devlink-family'

Jakub Kicinski says:

====================
tools: ynl: generate code for the devlink family

Another chunk of changes to support more ca

Merge branch 'tools-ynl-generate-code-for-the-devlink-family'

Jakub Kicinski says:

====================
tools: ynl: generate code for the devlink family

Another chunk of changes to support more capabilities in the YNL
code gen. Devlink brings in deep nesting and directional messages
(requests and responses have different IDs). We need a healthy
dose of codegen changes to support those (I wasn't planning to
support code gen for "directional" families initially, but
the importance of devlink and ethtool is undeniable).
====================

Link: https://lore.kernel.org/r/20230607202403.1089925-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: generate code for the devlink family

Admittedly the devlink.yaml spec is fairly limitted,
it only covers basic device get and info-get ops.
That's sufficient to be useful (monitoring FW

tools: ynl: generate code for the devlink family

Admittedly the devlink.yaml spec is fairly limitted,
it only covers basic device get and info-get ops.
That's sufficient to be useful (monitoring FW versions
in the fleet). Plus it gives us a chance to exercise
deep nesting and directional messaging in YNL.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'tools-ynl-generate-code-for-the-handshake-family'

Jakub Kicinski says:

====================
tools: ynl: generate code for the handshake family

Add necessary features and generate use

Merge branch 'tools-ynl-generate-code-for-the-handshake-family'

Jakub Kicinski says:

====================
tools: ynl: generate code for the handshake family

Add necessary features and generate user space C code for serializing
/ deserializing messages of the handshake family.

In addition to basics already present in netdev and fou, handshake
has nested attrs and multi-attr u32.
====================

Link: https://lore.kernel.org/r/20230606194302.919343-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: generate code for the handshake family

Generate support for the handshake family.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'tools-ynl-user-space-c'

Jakub Kicinski says:

====================
tools: ynl: user space C

Use the code gen which is already in tree to generate a user space
library for a handful of

Merge branch 'tools-ynl-user-space-c'

Jakub Kicinski says:

====================
tools: ynl: user space C

Use the code gen which is already in tree to generate a user space
library for a handful of simple families. I find YNL C quite useful
in some WIP projects, and I think others may find it useful, too.
I was hoping someone will pick this work up and finish it...
but it seems that Python YNL has largely stolen the thunder.
Python may not be great for selftest, tho, and actually this lib
is more fully-featured. The Python script was meant as a quick demo,
funny how those things go.

v2: https://lore.kernel.org/all/20230604175843.662084-1-kuba@kernel.org/
v1: https://lore.kernel.org/all/20230603052547.631384-1-kuba@kernel.org/
====================

Link: https://lore.kernel.org/r/20230605190108.809439-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: support fou and netdev in C

Generate the code for netdev and fou families. They are simple
and already supported by the code gen.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Sign

tools: ynl: support fou and netdev in C

Generate the code for netdev and fou families. They are simple
and already supported by the code gen.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: user space helpers

Add "fixed" part of the user space Netlink Spec-based library.
This will get linked with the protocol implementations to form
a full API.

Acked-by: Willem de Bruijn <

tools: ynl: user space helpers

Add "fixed" part of the user space Netlink Spec-based library.
This will get linked with the protocol implementations to form
a full API.

Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...