Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Introduce and use a single page frag cache for al

Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.

- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.

- Shrink the size of the base zero-copy send structure.

- Move TCP init under a new slow / sleepable version of DO_ONCE().

BPF:

- Add BPF-specific, any-context-safe memory allocator.

- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.

- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).

- Allow targeting BPF iterators to loop through resources of one
task/thread.

- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.

- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.

- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.

- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).

- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.

- Support accessing network tunnel metadata's flags.

- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.

- Add support for writing to Netfilter's nf_conn:mark.

Protocols:

- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).

- vsock: improve support for SO_RCVLOWAT.

- SMC: support SO_REUSEPORT.

- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.

- IPSec: support collect metadata mode for xfrm interfaces.

- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.

- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).

- MPTCP: support TCP_FASTOPEN_CONNECT.

- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.

- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.

- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.

- TLS: support the Korean ARIA-GCM crypto algorithm.

- Remove DECnet support.

Driver API:

- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.

- Ethernet Power Sourcing Equipment and Power Device support.

- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.

- Support PHY rate matching - adapting between differing host-side
and link-side speeds.

- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.

- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.

- Require that flash component name used during update matches one of
the components for which version is reported by info_get().

- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.

- Support offload of TLS connections with 256 bit keys.

New hardware / drivers:

- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).

- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module

- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)

Drivers:

- CAN:
- gs_usb: HW timestamp support

- Ethernet PHYs:
- lan8814: cable diagnostics

- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit

- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support

- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz

- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips

- RealTek WiFi (rtw89):
- P2P support"

* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...

show more ...

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-10-03

We've added 143 non-merge commits during the last 27

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-10-03

We've added 143 non-merge commits during the last 27 day(s) which contain
a total of 151 files changed, 8321 insertions(+), 1402 deletions(-).

The main changes are:

1) Add kfuncs for PKCS#7 signature verification from BPF programs, from Roberto Sassu.

2) Add support for struct-based arguments for trampoline based BPF programs,
from Yonghong Song.

3) Fix entry IP for kprobe-multi and trampoline probes under IBT enabled, from Jiri Olsa.

4) Batch of improvements to veristat selftest tool in particular to add CSV output,
a comparison mode for CSV outputs and filtering, from Andrii Nakryiko.

5) Add preparatory changes needed for the BPF core for upcoming BPF HID support,
from Benjamin Tissoires.

6) Support for direct writes to nf_conn's mark field from tc and XDP BPF program
types, from Daniel Xu.

7) Initial batch of documentation improvements for BPF insn set spec, from Dave Thaler.

8) Add a new BPF_MAP_TYPE_USER_RINGBUF map which provides single-user-space-producer /
single-kernel-consumer semantics for BPF ring buffer, from David Vernet.

9) Follow-up fixes to BPF allocator under RT to always use raw spinlock for the BPF
hashtab's bucket lock, from Hou Tao.

10) Allow creating an iterator that loops through only the resources of one
task/thread instead of all, from Kui-Feng Lee.

11) Add support for kptrs in the per-CPU arraymap, from Kumar Kartikeya Dwivedi.

12) Add a new kfunc helper for nf to set src/dst NAT IP/port in a newly allocated CT
entry which is not yet inserted, from Lorenzo Bianconi.

13) Remove invalid recursion check for struct_ops for TCP congestion control BPF
programs, from Martin KaFai Lau.

14) Fix W^X issue with BPF trampoline and BPF dispatcher, from Song Liu.

15) Fix percpu_counter leakage in BPF hashtab allocation error path, from Tetsuo Handa.

16) Various cleanups in BPF selftests to use preferred ASSERT_* macros, from Wang Yufen.

17) Add invocation for cgroup/connect{4,6} BPF programs for ICMP pings, from YiFei Zhu.

18) Lift blinding decision under bpf_jit_harden = 1 to bpf_capable(), from Yauheni Kaliuta.

19) Various libbpf fixes and cleanups including a libbpf NULL pointer deref, from Xin Liu.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (143 commits)
net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c
Documentation: bpf: Add implementation notes documentations to table of contents
bpf, docs: Delete misformatted table.
selftests/xsk: Fix double free
bpftool: Fix error message of strerror
libbpf: Fix overrun in netlink attribute iteration
selftests/bpf: Fix spelling mistake "unpriviledged" -> "unprivileged"
samples/bpf: Fix typo in xdp_router_ipv4 sample
bpftool: Remove unused struct event_ring_info
bpftool: Remove unused struct btf_attach_point
bpf, docs: Add TOC and fix formatting.
bpf, docs: Add Clang note about BPF_ALU
bpf, docs: Move Clang notes to a separate file
bpf, docs: Linux byteswap note
bpf, docs: Move legacy packet instructions to a separate file
selftests/bpf: Check -EBUSY for the recurred bpf_setsockopt(TCP_CONGESTION)
bpf: tcp: Stop bpf_setsockopt(TCP_CONGESTION) in init ops to recur itself
bpf: Refactor bpf_setsockopt(TCP_CONGESTION) handling into another function
bpf: Move the "cdg" tcp-cc check to the common sol_tcp_sockopt()
bpf: Add __bpf_prog_{enter,exit}_struct_ops for struct_ops trampoline
...
====================

Link: https://lore.kernel.org/r/20221003194915.11847-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'for-6.1/nvdimm' into libnvdimm-for-next

Add v6.1 content on top of some straggling updates that missed v6.0.

Merge branch 'mlx5-vfio' into mlx5-next

Merge net/mlx5 dependencies for device DMA logging.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

Merge branch 'for-6.0/dax' into libnvdimm-fixes

Pick up another "Soft Reservation" fix for v6.0-final on top of some
straggling nvdimm fixes that missed v5.19.

Merge branch 'bpf: Add user-space-publisher ring buffer map type'

David Vernet says:

====================
This patch set defines a new map type, BPF_MAP_TYPE_USER_RINGBUF, which
provides single-use

Merge branch 'bpf: Add user-space-publisher ring buffer map type'

David Vernet says:

====================
This patch set defines a new map type, BPF_MAP_TYPE_USER_RINGBUF, which
provides single-user-space-producer / single-kernel-consumer semantics over
a ring buffer. Along with the new map type, a helper function called
bpf_user_ringbuf_drain() is added which allows a BPF program to specify a
callback with the following signature, to which samples are posted by the
helper:

void (struct bpf_dynptr *dynptr, void *context);

The program can then use the bpf_dynptr_read() or bpf_dynptr_data() helper
functions to safely read the sample from the dynptr. There are currently no
helpers available to determine the size of the sample, but one could easily
be added if required.

On the user-space side, libbpf has been updated to export a new
'struct ring_buffer_user' type, along with the following symbols:

struct ring_buffer_user *
ring_buffer_user__new(int map_fd,
const struct ring_buffer_user_opts *opts);
void ring_buffer_user__free(struct ring_buffer_user *rb);
void *ring_buffer_user__reserve(struct ring_buffer_user *rb,
uint32_t size);
void *ring_buffer_user__poll(struct ring_buffer_user *rb, uint32_t size,
int timeout_ms);
void ring_buffer_user__discard(struct ring_buffer_user *rb, void *sample);
void ring_buffer_user__submit(struct ring_buffer_user *rb, void *sample);

These symbols are exported for inclusion in libbpf version 1.0.0.

Signed-off-by: David Vernet <void@manifault.com>
---
v5 -> v6:
- Fixed s/BPF_MAP_TYPE_RINGBUF/BPF_MAP_TYPE_USER_RINGBUF typo in the
libbpf user ringbuf doxygen header comment for ring_buffer_user__new()
(Andrii).
- Specify that pointer returned from ring_buffer_user__reserve() and its
blocking counterpart is 8-byte aligned (Andrii).
- Renamed user_ringbuf__commit() to user_ringbuf_commit(), as it's static
(Andrii).
- Another slight reworking of user_ring_buffer__reserve_blocking() to
remove some extraneous nanosecond variables + checking (Andrii).
- Add a final check of user_ring_buffer__reserve() in
user_ring_buffer__reserve_blocking().
- Moved busy bit lock / unlock logic from __bpf_user_ringbuf_peek() to
bpf_user_ringbuf_drain() (Andrii).
- -ENOSPC -> -ENODATA for an empty ring buffer in
__bpf_user_ringbuf_peek() (Andrii).
- Updated BPF_RB_FORCE_WAKEUP to only force a wakeup notification to be
sent if even if no sample was drained.
- Changed a bit of the wording in the UAPI header for
bpf_user_ringbuf_drain() to mention the BPF_RB_FORCE_WAKEUP behavior.
- Remove extra space after return in ringbuf_map_poll_user() (Andrii).
- Removed now-extraneous paragraph from the commit summary of patch 2/4
(Andrii).
v4 -> v5:
- DENYLISTed the user-ringbuf test suite on s390x. We have a number of
functions in the progs/user_ringbuf_success.c prog that user-space
fires by invoking a syscall. Not all of these syscalls are available
on s390x. If and when we add the ability to kick the kernel from
user-space, or if we end up using iterators for that per Hao's
suggestion, we could re-enable this test suite on s390x.
- Fixed a few more places that needed ringbuffer -> ring buffer.
v3 -> v4:
- Update BPF_MAX_USER_RINGBUF_SAMPLES to not specify a bit, and instead
just specify a number of samples. (Andrii)
- Update "ringbuffer" in comments and commit summaries to say "ring
buffer". (Andrii)
- Return -E2BIG from bpf_user_ringbuf_drain() both when a sample can't
fit into the ring buffer, and when it can't fit into a dynptr. (Andrii)
- Don't loop over samples in __bpf_user_ringbuf_peek() if a sample was
discarded. Instead, return -EAGAIN so the caller can deal with it. Also
updated the caller to detect -EAGAIN and skip over it when iterating.
(Andrii)
- Removed the heuristic for notifying user-space when a sample is drained,
causing the ring buffer to no longer be full. This may be useful in the
future, but is being removed now because it's strictly a heuristic.
- Re-add BPF_RB_FORCE_WAKEUP flag to bpf_user_ringbuf_drain(). (Andrii)
- Remove helper_allocated_dynptr tracker from verifier. (Andrii)
- Add libbpf function header comments to tools/lib/bpf/libbpf.h, so that
they will be included in rendered libbpf docs. (Andrii)
- Add symbols to a new LIBBPF_1.1.0 section in linker version script,
rather than including them in LIBBPF_1.0.0. (Andrii)
- Remove libbpf_err() calls from static libbpf functions. (Andrii)
- Check user_ring_buffer_opts instead of ring_buffer_opts in
user_ring_buffer__new(). (Andrii)
- Avoid an extra if in the hot path in user_ringbuf__commit(). (Andrii)
- Use ENOSPC rather than ENODATA if no space is available in the ring
buffer. (Andrii)
- Don't round sample size in header to 8, but still round size that is
reserved and written to 8, and validate positions are multiples of 8
(Andrii).
- Use nanoseconds for most calculations in
user_ring_buffer__reserve_blocking(). (Andrii)
- Don't use CHECK() in testcases, instead use ASSERT_*. (Andrii)
- Use SEC("?raw_tp") instead of SEC("?raw_tp/sys_nanosleep") in negative
test. (Andrii)
- Move test_user_ringbuf.h header to live next to BPF program instead of
a directory up from both it and the user-space test program. (Andrii)
- Update bpftool help message / docs to also include user_ringbuf.
v2 -> v3:
- Lots of formatting fixes, such as keeping things on one line if they fit
within 100 characters, and removing some extraneous newlines. Applies
to all diffs in the patch-set. (Andrii)
- Renamed ring_buffer_user__* symbols to user_ring_buffer__*. (Andrii)
- Added a missing smb_mb__before_atomic() in
__bpf_user_ringbuf_sample_release(). (Hao)
- Restructure how and when notification events are sent from the kernel to
the user-space producers via the .map_poll() callback for the
BPF_MAP_TYPE_USER_RINGBUF map. Before, we only sent a notification when
the ringbuffer was fully drained. Now, we guarantee user-space that
we'll send an event at least once per bpf_user_ringbuf_drain(), as long
as at least one sample was drained, and BPF_RB_NO_WAKEUP was not passed.
As a heuristic, we also send a notification event any time a sample being
drained causes the ringbuffer to no longer be full. (Andrii)
- Continuing on the above point, updated
user_ring_buffer__reserve_blocking() to loop around epoll_wait() until a
sufficiently large sample is found. (Andrii)
- Communicate BPF_RINGBUF_BUSY_BIT and BPF_RINGBUF_DISCARD_BIT in sample
headers. The ringbuffer implementation still only supports
single-producer semantics, but we can now add synchronization support in
user_ring_buffer__reserve(), and will automatically get multi-producer
semantics. (Andrii)
- Updated some commit summaries, specifically adding more details where
warranted. (Andrii)
- Improved function documentation for bpf_user_ringbuf_drain(), more
clearly explaining all function arguments and return types, as well as
the semantics for waking up user-space producers.
- Add function header comments for user_ring_buffer__reserve{_blocking}().
(Andrii)
- Rounding-up all samples to 8-bytes in the user-space producer, and
enforcing that all samples are properly aligned in the kernel. (Andrii)
- Added testcases that verify that bpf_user_ringbuf_drain() properly
validates samples, and returns error conditions if any invalid samples
are encountered. (Andrii)
- Move atomic_t busy field out of the consumer page, and into the
struct bpf_ringbuf. (Andrii)
- Split ringbuf_map_{mmap, poll}_{kern, user}() into separate
implementations. (Andrii)
- Don't silently consume errors in bpf_user_ringbuf_drain(). (Andrii)
- Remove magic number of samples (4096) from bpf_user_ringbuf_drain(),
and instead use BPF_MAX_USER_RINGBUF_SAMPLES macro, which allows
128k samples. (Andrii)
- Remove MEM_ALLOC modifier from PTR_TO_DYNPTR register in verifier, and
instead rely solely on the register being PTR_TO_DYNPTR. (Andrii)
- Move freeing of atomic_t busy bit to before we invoke irq_work_queue() in
__bpf_user_ringbuf_sample_release(). (Andrii)
- Only check for BPF_RB_NO_WAKEUP flag in bpf_ringbuf_drain().
- Remove libbpf function names from kernel smp_{load, store}* comments in
the kernel. (Andrii)
- Don't use double-underscore naming convention in libbpf functions.
(Andrii)
- Use proper __u32 and __u64 for types where we need to guarantee their
size. (Andrii)

v1 -> v2:
- Following Joanne landing 883743422ced ("bpf: Fix ref_obj_id for dynptr
data slices in verifier") [0], removed [PATCH 1/5] bpf: Clear callee
saved regs after updating REG0 [1]. (Joanne)
- Following the above adjustment, updated check_helper_call() to not store
a reference for bpf_dynptr_data() if the register containing the dynptr
is of type MEM_ALLOC. (Joanne)
- Fixed casting issue pointed out by kernel test robot by adding a missing
(uintptr_t) cast. (lkp)

[0] https://lore.kernel.org/all/20220809214055.4050604-1-joannelkoong@gmail.com/
[1] https://lore.kernel.org/all/20220808155341.2479054-1-void@manifault.com/
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

show more ...

bpf: Define new BPF_MAP_TYPE_USER_RINGBUF map type

We want to support a ringbuf map type where samples are published from
user-space, to be consumed by BPF programs. BPF currently supports a
kernel

bpf: Define new BPF_MAP_TYPE_USER_RINGBUF map type

We want to support a ringbuf map type where samples are published from
user-space, to be consumed by BPF programs. BPF currently supports a
kernel -> user-space circular ring buffer via the BPF_MAP_TYPE_RINGBUF
map type. We'll need to define a new map type for user-space -> kernel,
as none of the helpers exported for BPF_MAP_TYPE_RINGBUF will apply
to a user-space producer ring buffer, and we'll want to add one or
more helper functions that would not apply for a kernel-producer
ring buffer.

This patch therefore adds a new BPF_MAP_TYPE_USER_RINGBUF map type
definition. The map type is useless in its current form, as there is no
way to access or use it for anything until we one or more BPF helpers. A
follow-on patch will therefore add a new helper function that allows BPF
programs to run callbacks on samples that are published to the ring
buffer.

Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220920000100.477320-2-void@manifault.com

show more ...

Merge tag 'v6.0-rc6' into locking/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-misc-next

We need 6.0-rc1 to merge the backlight rework PR.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'am5748-fix' into fixes

Merge branch 'linus' into x86/mm, to refresh the branch

This branch is ~14k commits behind upstream, and has an old merge base
from early into the merge window, refresh it to v6.0-rc3+fixes before
q

Merge branch 'linus' into x86/mm, to refresh the branch

This branch is ~14k commits behind upstream, and has an old merge base
from early into the merge window, refresh it to v6.0-rc3+fixes before
queueing up new commits.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'sched/warnings' into sched/core, to pick up WARN_ON_ONCE() conversion commit

Merge in the BUG_ON() => WARN_ON_ONCE() conversion commit.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next.

Since drm-next does not have commit f0c70d41e4e8 ("drm/i915/guc: remove
runtime info pri

Merge drm/drm-next into drm-intel-next

Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next.

Since drm-next does not have commit f0c70d41e4e8 ("drm/i915/guc: remove
runtime info printing from time stamp logging") yet, only
drm-intel-gt-next, will need to do that as part of the merge here to
build.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Sync up with the latest I2C code base to get updated prototype of I2C
bus

Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Sync up with the latest I2C code base to get updated prototype of I2C
bus remove() method.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging for v6.0-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge part of branch 'for-next.instantiate' into for-next

Merge drm/drm-next into drm-intel-next

Sync up. In special to get the drm-intel-gt-next stuff.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Paolo Abeni:
"Core:

- Refactor the forward memory allocation to better cop

Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Paolo Abeni:
"Core:

- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one

- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.

- Network-side support for IO uring zero-copy send.

- A few skb drop reason improvements, including codegen the source
file with string mapping instead of using macro magic.

- Rename reference tracking helpers to a more consistent netdev_*
schema.

- Adapt u64_stats_t type to address load/store tearing issues.

- Refine debug helper usage to reduce the log noise caused by bots.

BPF:

- Improve socket map performance, avoiding skb cloning on read
operation.

- Add support for 64 bits enum, to match types exposed by kernel.

- Introduce support for sleepable uprobes program.

- Introduce support for enum textual representation in libbpf.

- New helpers to implement synproxy with eBPF/XDP.

- Improve loop performances, inlining indirect calls when possible.

- Removed all the deprecated libbpf APIs.

- Implement new eBPF-based LSM flavor.

- Add type match support, which allow accurate queries to the eBPF
used types.

- A few TCP congetsion control framework usability improvements.

- Add new infrastructure to manipulate CT entries via eBPF programs.

- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.

Protocols:

- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.

- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.

- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.

- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.

- Support for changing the initial MTPCP subflow priority/backup
status

- Introduce virtually contingus buffers for sockets over RDMA, to
cope better with memory pressure.

- Extend CAN ethtool support with timestamping capabilities

- Refactor CAN build infrastructure to allow building only the needed
features.

Driver API:

- Remove devlink mutex to allow parallel commands on multiple links.

- Add support for pause stats in distributed switch.

- Implement devlink helpers to query and flash line cards.

- New helper for phy mode to register conversion.

New hardware / drivers:

- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.

- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.

- Ethernet DSA driver for the Microchip LAN937x switch.

- Ethernet PHY driver for the Aquantia AQR113C EPHY.

- CAN driver for the OBD-II ELM327 interface.

- CAN driver for RZ/N1 SJA1000 CAN controller.

- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.

Drivers:

- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload

- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate

- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default

- Microsoft vNIC driver (mana)
- add support for XDP redirect

- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support

- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability (parts 1-6)
- support for PTP in Spectrum-2 asics

- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY

- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload

- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share the
probe code (parts 1, 2), add support for phylink mac
configuration

- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support

Old code removal:

- Neterion vxge ethernet driver: this is untouched since more than 10 years"

* tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits)
doc: sfp-phylink: Fix a broken reference
wireguard: selftests: support UML
wireguard: allowedips: don't corrupt stack when detecting overflow
wireguard: selftests: update config fragments
wireguard: ratelimiter: use hrtimer in selftest
net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ
net: usb: ax88179_178a: Bind only to vendor-specific interface
selftests: net: fix IOAM test skip return code
net: usb: make USB_RTL8153_ECM non user configurable
net: marvell: prestera: remove reduntant code
octeontx2-pf: Reduce minimum mtu size to 60
net: devlink: Fix missing mutex_unlock() call
net/tls: Remove redundant workqueue flush before destroy
net: txgbe: Fix an error handling path in txgbe_probe()
net: dsa: Fix spelling mistakes and cleanup code
Documentation: devlink: add add devlink-selftests to the table of contents
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
net: ionic: fix error check for vlan flags in ionic_set_nic_features()
net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
nfp: flower: add support for tunnel offload without key ID
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging from drm/drm-next for the final fixes that will go
into v5.20.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v5.19-rc5' into next

Merge with mainline to bring up the latest definition from MFD subsystem
needed for Mediatek keypad driver.

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major -

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get new regmap APIs of v5.19-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-06-17

We've added 72 non-merge commits during the last 15

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-06-17

We've added 72 non-merge commits during the last 15 day(s) which contain
a total of 92 files changed, 4582 insertions(+), 834 deletions(-).

The main changes are:

1) Add 64 bit enum value support to BTF, from Yonghong Song.

2) Implement support for sleepable BPF uprobe programs, from Delyan Kratunov.

3) Add new BPF helpers to issue and check TCP SYN cookies without binding to a
socket especially useful in synproxy scenarios, from Maxim Mikityanskiy.

4) Fix libbpf's internal USDT address translation logic for shared libraries as
well as uprobe's symbol file offset calculation, from Andrii Nakryiko.

5) Extend libbpf to provide an API for textual representation of the various
map/prog/attach/link types and use it in bpftool, from Daniel Müller.

6) Provide BTF line info for RV64 and RV32 JITs, and fix a put_user bug in the
core seen in 32 bit when storing BPF function addresses, from Pu Lehui.

7) Fix libbpf's BTF pointer size guessing by adding a list of various aliases
for 'long' types, from Douglas Raillard.

8) Fix bpftool to readd setting rlimit since probing for memcg-based accounting
has been unreliable and caused a regression on COS, from Quentin Monnet.

9) Fix UAF in BPF cgroup's effective program computation triggered upon BPF link
detachment, from Tadeusz Struk.

10) Fix bpftool build bootstrapping during cross compilation which was pointing
to the wrong AR process, from Shahab Vahedi.

11) Fix logic bug in libbpf's is_pow_of_2 implementation, from Yuze Chi.

12) BPF hash map optimization to avoid grabbing spinlocks of all CPUs when there
is no free element. Also add a benchmark as reproducer, from Feng Zhou.

13) Fix bpftool's codegen to bail out when there's no BTF, from Michael Mullin.

14) Various minor cleanup and improvements all over the place.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
bpf: Fix bpf_skc_lookup comment wrt. return type
bpf: Fix non-static bpf_func_proto struct definitions
selftests/bpf: Don't force lld on non-x86 architectures
selftests/bpf: Add selftests for raw syncookie helpers in TC mode
bpf: Allow the new syncookie helpers to work with SKBs
selftests/bpf: Add selftests for raw syncookie helpers
bpf: Add helpers to issue and check SYN cookies in XDP
bpf: Allow helpers to accept pointers with a fixed size
bpf: Fix documentation of th_len in bpf_tcp_{gen,check}_syncookie
selftests/bpf: add tests for sleepable (uk)probes
libbpf: add support for sleepable uprobe programs
bpf: allow sleepable uprobe programs to attach
bpf: implement sleepable uprobes by chaining gps
bpf: move bpf_prog to bpf.h
libbpf: Fix internal USDT address translation logic for shared libraries
samples/bpf: Check detach prog exist or not in xdp_fwd
selftests/bpf: Avoid skipping certain subtests
selftests/bpf: Fix test_varlen verification failure with latest llvm
bpftool: Do not check return value from libbpf_set_strict_mode()
Revert "bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK"
...
====================

Link: https://lore.kernel.org/r/20220617220836.7373-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...