Merge drm/drm-next into drm-misc-next

Now that 4.19-rc1 is cut, backmerge it into -misc-next.

Signed-off-by: Sean Paul <seanpaul@chromium.org>

Merge branch 'linus/master' into rdma.git for-next

rdma.git merge resolution for the 4.19 merge window

Conflicts:
drivers/infiniband/core/rdma_core.c
- Use the rdma code and revise with the new

Merge branch 'linus/master' into rdma.git for-next

rdma.git merge resolution for the 4.19 merge window

Conflicts:
drivers/infiniband/core/rdma_core.c
- Use the rdma code and revise with the new spelling for
atomic_fetch_add_unless
drivers/nvme/host/rdma.c
- Replace max_sge with max_send_sge in new blk code
drivers/nvme/target/rdma.c
- Use the blk code and revise to use NULL for ib_post_recv when
appropriate
- Replace max_sge with max_recv_sge in new blk code
net/rds/ib_send.c
- Use the net code and revise to use NULL for ib_post_recv when
appropriate

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
"Highlights:

- Gustavo A. R. Silva keeps working on the implicit switch fallthru

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
"Highlights:

- Gustavo A. R. Silva keeps working on the implicit switch fallthru
changes.

- Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
Luca Coelho.

- Re-enable ASPM in r8169, from Kai-Heng Feng.

- Add virtual XFRM interfaces, which avoids all of the limitations of
existing IPSEC tunnels. From Steffen Klassert.

- Convert GRO over to use a hash table, so that when we have many
flows active we don't traverse a long list during accumluation.

- Many new self tests for routing, TC, tunnels, etc. Too many
contributors to mention them all, but I'm really happy to keep
seeing this stuff.

- Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

- Lots of cleanups and fixes in L2TP code from Guillaume Nault.

- Add IPSEC offload support to netdevsim, from Shannon Nelson.

- Add support for slotting with non-uniform distribution to netem
packet scheduler, from Yousuk Seung.

- Add UDP GSO support to mlx5e, from Boris Pismenny.

- Support offloading of Team LAG in NFP, from John Hurley.

- Allow to configure TX queue selection based upon RX queue, from
Amritha Nambiar.

- Support ethtool ring size configuration in aquantia, from Anton
Mikaev.

- Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

- Support list based batching and stack traversal of SKBs, this is
very exciting work. From Edward Cree.

- Busyloop optimizations in vhost_net, from Toshiaki Makita.

- Introduce the ETF qdisc, which allows time based transmissions. IGB
can offload this in hardware. From Vinicius Costa Gomes.

- Add parameter support to devlink, from Moshe Shemesh.

- Several multiplication and division optimizations for BPF JIT in
nfp driver, from Jiong Wang.

- Lots of prepatory work to make more of the packet scheduler layer
lockless, when possible, from Vlad Buslov.

- Add ACK filter and NAT awareness to sch_cake packet scheduler, from
Toke Høiland-Jørgensen.

- Support regions and region snapshots in devlink, from Alex Vesker.

- Allow to attach XDP programs to both HW and SW at the same time on
a given device, with initial support in nfp. From Jakub Kicinski.

- Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

- Use PHYLIB in r8169 driver, from Heiner Kallweit.

- All sorts of changes to support Spectrum 2 in mlxsw driver, from
Ido Schimmel.

- PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

- Make TCP_USER_TIMEOUT socket option more accurate, from Jon
Maxwell.

- Support for templates in packet scheduler classifier, from Jiri
Pirko.

- IPV6 support in RDS, from Ka-Cheong Poon.

- Native tproxy support in nf_tables, from Máté Eckl.

- Maintain IP fragment queue in an rbtree, but optimize properly for
in-order frags. From Peter Oskolkov.

- Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
hv/netvsc: Fix NULL dereference at single queue mode fallback
net: filter: mark expected switch fall-through
xen-netfront: fix warn message as irq device name has '/'
cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
net: dsa: mv88e6xxx: missing unlock on error path
rds: fix building with IPV6=m
inet/connection_sock: prefer _THIS_IP_ to current_text_addr
net: dsa: mv88e6xxx: bitwise vs logical bug
net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
ieee802154: hwsim: using right kind of iteration
net: hns3: Add vlan filter setting by ethtool command -K
net: hns3: Set tx ring' tc info when netdev is up
net: hns3: Remove tx ring BD len register in hns3_enet
net: hns3: Fix desc num set to default when setting channel
net: hns3: Fix for phy link issue when using marvell phy driver
net: hns3: Fix for information of phydev lost problem when down/up
net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
net: hns3: Add support for serdes loopback selftest
bnxt_en: take coredump_record structure off stack
...

show more ...

Merge remote-tracking branch 'net-next/master'

Merge drm/drm-next into drm-intel-next-queued

We need a backmerge to get DP_DPCD_REV_14 before we push other
i915 changes to dinq that could break compilation.

Signed-off-by: Rodrigo Vivi <rodrigo.

Merge drm/drm-next into drm-intel-next-queued

We need a backmerge to get DP_DPCD_REV_14 before we push other
i915 changes to dinq that could break compilation.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-07-20

The following pull-request contains BPF updates for yo

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-07-20

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add sharing of BPF objects within one ASIC: this allows for reuse of
the same program on multiple ports of a device, and therefore gains
better code store utilization. On top of that, this now also enables
sharing of maps between programs attached to different ports of a
device, from Jakub.

2) Cleanup in libbpf and bpftool's Makefile to reduce unneeded feature
detections and unused variable exports, also from Jakub.

3) First batch of RCU annotation fixes in prog array handling, i.e.
there are several __rcu markers which are not correct as well as
some of the RCU handling, from Roman.

4) Two fixes in BPF sample files related to checking of the prog_cnt
upper limit from sample loader, from Dan.

5) Minor cleanup in sockmap to remove a set but not used variable,
from Colin.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

tools: bpftool: don't pass FEATURES_DUMP to libbpf

bpftool does not export features it probed for, i.e.
FEATURE_DUMP_EXPORT is always empty, so don't try to communicate
the features to libbpf. It h

tools: bpftool: don't pass FEATURES_DUMP to libbpf

bpftool does not export features it probed for, i.e.
FEATURE_DUMP_EXPORT is always empty, so don't try to communicate
the features to libbpf. It has no effect.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-07-15

The following pull-request contains BPF updates for yo

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-07-15

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Various different arm32 JIT improvements in order to optimize code emission
and make the JIT code itself more robust, from Russell.

2) Support simultaneous driver and offloaded XDP in order to allow for advanced
use-cases where some work is offloaded to the NIC and some to the host. Also
add ability for bpftool to load programs and maps beyond just the cgroup case,
from Jakub.

3) Add BPF JIT support in nfp for multiplication as well as division. For the
latter in particular, it uses the reciprocal algorithm to emulate it, from Jiong.

4) Add BTF pretty print functionality to bpftool in plain and JSON output
format, from Okash.

5) Add build and installation to the BPF helper man page into bpftool, from Quentin.

6) Add a TCP BPF callback for listening sockets which is triggered right after
the socket transitions to TCP_LISTEN state, from Andrey.

7) Add a new cgroup tree command to bpftool which iterates over the whole cgroup
tree and prints all attached programs, from Roman.

8) Improve xdp_redirect_cpu sample to support parsing of double VLAN tagged
packets, from Jesper.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'bpf-bpftool-improved-prog-load'

Jakub Kicinski says:

====================
This series starts with two minor clean ups to test_offload.py
selftest script.

The next 11 patches extend t

Merge branch 'bpf-bpftool-improved-prog-load'

Jakub Kicinski says:

====================
This series starts with two minor clean ups to test_offload.py
selftest script.

The next 11 patches extend the abilities of bpftool prog load
beyond the simple cgroup use cases. Three new parameters are
added:

- type - allows specifying program type, independent of how
code sections are named;
- map - allows reusing existing maps, instead of creating a new
map on every program load;
- dev - offload/binding to a device.

A number of changes to libbpf is required to accomplish the task.
The section - program type logic mapping is exposed. We should
probably aim to use the libbpf program section naming everywhere.
For reuse of maps we need to allow users to set FD for bpf map
object in libbpf.

Examples

Load program my_xdp.o and pin it as /sys/fs/bpf/my_xdp, for xdp
program type:

$ bpftool prog load my_xdp.o /sys/fs/bpf/my_xdp \
type xdp

As above but for offload:

$ bpftool prog load my_xdp.o /sys/fs/bpf/my_xdp \
type xdp \
dev netdevsim0

Load program my_maps.o, but for the first map reuse map id 17,
and for the map called "other_map" reuse pinned map /sys/fs/bpf/map0:

$ bpftool prog load my_maps.o /sys/fs/bpf/prog \
map idx 0 id 17 \
map name other_map pinned /sys/fs/bpf/map0

v3:
- fix return codes in patch 5;
- rename libbpf_prog_type_by_string() -> libbpf_prog_type_by_name();
- fold file path into xattr in patch 8;
- add patch 10;
- use dup3() in patch 12;
- depend on fd value in patch 12;
- close old fd in patch 12.
v2:
- add compat for reallocarray().
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

show more ...

tools: bpf: make use of reallocarray

reallocarray() is a safer variant of realloc which checks for
multiplication overflow in case of array allocation. Since it's
not available in Glibc < 2.26 impo

tools: bpf: make use of reallocarray

reallocarray() is a safer variant of realloc which checks for
multiplication overflow in case of array allocation. Since it's
not available in Glibc < 2.26 import kernel's overflow.h and
add a static inline implementation when needed. Use feature
detection to probe for existence of reallocarray.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-07-03

The following pull-request contains BPF updates for yo

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-07-03

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Various improvements to bpftool and libbpf, that is, bpftool build
speed improvements, missing BPF program types added for detection
by section name, ability to load programs from '.text' section is
made to work again, and better bash completion handling, from Jakub.

2) Improvements to nfp JIT's map read handling which allows for optimizing
memcpy from map to packet, from Jiong.

3) New BPF sample is added which demonstrates XDP in combination with
bpf_perf_event_output() helper to sample packets on all CPUs, from Toke.

4) Add a new BPF kselftest case for tracking connect(2) BPF hooks
infrastructure in combination with TFO, from Andrey.

5) Extend the XDP/BPF xdp_rxq_info sample code with a cmdline option to
read payload from packet data in order to use it for benchmarking.
Also for '--action XDP_TX' option implement swapping of MAC addresses
to avoid drops on some hardware seen during testing, from Jesper.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'bpf-bpftool-libbpf-improvements'

Jakub Kicinski says:

====================
Set of random updates to bpftool and libbpf. I'm preparing for
extending bpftool prog load, but there is a

Merge branch 'bpf-bpftool-libbpf-improvements'

Jakub Kicinski says:

====================
Set of random updates to bpftool and libbpf. I'm preparing for
extending bpftool prog load, but there is a good number of
improvements that can be made before bpf -> bpf-next merge
helping to keep the later patch set to a manageable size as well.

First patch is a bpftool build speed improvement. Next missing
program types are added to libbpf program type detection by section
name. The ability to load programs from '.text' section is restored
when ELF file doesn't contain any pseudo calls.

In bpftool I remove my Author comments as unnecessary sign of vanity.
Last but not least missing option is added to bash completions and
processing of options in bash completions is improved.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

show more ...

tools: bpftool: use correct make variable type to improve compilation time

Commit 4bfe3bd3cc35 ("tools/bpftool: use version from the kernel
source tree") added version to bpftool. The version used

tools: bpftool: use correct make variable type to improve compilation time

Commit 4bfe3bd3cc35 ("tools/bpftool: use version from the kernel
source tree") added version to bpftool. The version used is
equal to the kernel version and obtained by running make kernelversion
against kernel source tree. Version is then communicated
to the sources with a command line define set in CFLAGS.

Use a simply expanded variable for the version, otherwise the
recursive make will run every time CFLAGS are used.

This brings the single-job compilation time for me from almost
16 sec down to less than 4 sec.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

show more ...

Merge tag 'v4.18-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.18-rc2

Merge tag 'v4.18-rc2' into next-general

Merge to Linux 4.18-rc2 for security subsystem developers.

Merge branch 'linus' into x86/urgent

Required to queue a dependent fix.

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

1) Add Maglev hashing scheduler to IPVS, from Inju Song.

2) Lots of new TC subsystem

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

1) Add Maglev hashing scheduler to IPVS, from Inju Song.

2) Lots of new TC subsystem tests from Roman Mashak.

3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.

4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.

5) Add ttl inherit support to vxlan, from Hangbin Liu.

6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.

7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.

8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.

9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.

10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.

11) Plumb extack down into fib_rules, from Roopa Prabhu.

12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.

13) Add UDP GSO support, from Willem de Bruijn.

14) Add documentation for eBPF helpers, from Quentin Monnet.

15) Add TLS tx offload to mlx5, from Ilya Lesokhin.

16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.

17) Add x86_32 eBPF JIT compiler, from Wang YanQing.

18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.

19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.

20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.

21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.

22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.

23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.

24) Add TCP SACK compression, from Eric Dumazet.

25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.

26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.

27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.

28) Add lots of forwarding selftests, from Petr Machata.

29) Add generic network device failover driver, from Sridhar Samudrala.

* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 4.18 merge window.

Merge branches 'clk-warn', 'clk-core', 'clk-spear' and 'clk-qcom-msm8998' into clk-next

* clk-warn:
clk: Print the clock name and warning cause

* clk-core:
clk: Remove clk_init_cb typedef

* cl

Merge branches 'clk-warn', 'clk-core', 'clk-spear' and 'clk-qcom-msm8998' into clk-next

* clk-warn:
clk: Print the clock name and warning cause

* clk-core:
clk: Remove clk_init_cb typedef

* clk-spear:
clk: spear: fix WDT clock definition on SPEAr600

* clk-qcom-msm8998:
clk: qcom: Add MSM8998 Global Clock Control (GCC) driver

show more ...

Merge tag 'v4.17-rc6' into next

Sync up with mainline to bring in Atmel controller changes for Caroline.

Merge remote-tracking branch 'net-next/master' into mac80211-next

Bring in net-next which had pulled in net, so I have the changes
from mac80211 and can apply a patch that would otherwise conflict.

Merge remote-tracking branch 'net-next/master' into mac80211-next

Bring in net-next which had pulled in net, so I have the changes
from mac80211 and can apply a patch that would otherwise conflict.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Merge branch 'drm-intel-next-queued' into gvt-next

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

drm-misc-next is still based on v4.16-rc7, and was getting a bit stale.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.inte

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

drm-misc-next is still based on v4.16-rc7, and was getting a bit stale.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Minor conflict, a CHECK was placed into an if() statement
in net-next, whilst a newline was added to that CHECK
call in 'net'. Thank

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Minor conflict, a CHECK was placed into an if() statement
in net-next, whilst a newline was added to that CHECK
call in 'net'. Thanks to Daniel for the merge resolution.

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'bpf-event-output-offload'

Jakub Kicinski says:

====================
This series centres on NFP offload of bpf_event_output(). The
first patch allows perf event arrays to be used by o

Merge branch 'bpf-event-output-offload'

Jakub Kicinski says:

====================
This series centres on NFP offload of bpf_event_output(). The
first patch allows perf event arrays to be used by offloaded
programs. Next patch makes the nfp driver keep track of such
arrays to be able to filter FW events referring to maps.
Perf event arrays are not device bound. Having driver
reimplement and manage the perf array seems brittle and unnecessary.

Patch 4 moves slightly the verifier step which replaces map fds
with map pointers. This is useful for nfp JIT since we can then
easily replace host pointers with NFP table ids (patch 6). This
allows us to lift the limitation on map helpers having to be used
with the same map pointer on all paths. Second use of replacing
fds with real host map pointers is that we can use the host map
pointer as a key for FW events in perf event array offload.

Patch 5 adds perf event output offload support for the NFP.

There are some differences between bpf_event_output() offloaded
and non-offloaded version. The FW messages which carry events
may get dropped and reordered relatively easily. The return codes
from the helper are also not guaranteed to match the host. Users
are warned about some of those discrepancies with a one time
warning message to kernel logs.

bpftool gains an ability to dump perf ring events in a very simple
format. This was very useful for testing and simple debug, maybe
it will be useful to others?

Last patch is a trivial comment fix.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

show more ...