Merge branch 'fixes-v5.7' into fixes

Merge drm/drm-next into drm-misc-next

Backmerging required to pull topic/phy-compliance.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next-queued

Backmerging in order to pull "topic/phy-compliance".

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge v5.7-rc1 into drm-misc-fixes

Start the new drm-misc-fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh

Resolve these conflicts:

arch/x86/Kconfig
arch/x86/kernel/Makefile

Do a minor "evil merge" to move the KCSAN entry up a

Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh

Resolve these conflicts:

arch/x86/Kconfig
arch/x86/kernel/Makefile

Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines
in the Kconfig to reduce the probability of future conflicts.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'for-5.7/appleir' into for-linus

- small code cleanups in hid-appleir from Lucas Tanure

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:
"Highlights:

1) Fix the iwlwifi regression, from Johannes Berg.

2) Support BSS

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:
"Highlights:

1) Fix the iwlwifi regression, from Johannes Berg.

2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.

3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.

4) Add TTL decrement action to openvswitch, from Matteo Croce.

5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.

6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.

7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.

8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.

9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.

10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.

11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.

12) Support bcmgenet on ACPI, from Jeremy Linton.

13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.

14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.

15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.

16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.

17) Offload FIFO qdisc in mlxsw, from Petr Machata.

18) Support UDP sockets in sockmap, from Lorenz Bauer.

19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.

20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.

21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.

22) Add support for hw offload of MACSEC, from Antoine Tenart.

23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.

24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.

25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...

show more ...

Merge branch 'x86/kdump' into locking/kcsan, to resolve conflicts

Conflicts:
arch/x86/purgatory/Makefile

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-03-13

The following pull-request contains BPF updates for yo

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-03-13

The following pull-request contains BPF updates for your *net-next* tree.

We've added 86 non-merge commits during the last 12 day(s) which contain
a total of 107 files changed, 5771 insertions(+), 1700 deletions(-).

The main changes are:

1) Add modify_return attach type which allows to attach to a function via
BPF trampoline and is run after the fentry and before the fexit programs
and can pass a return code to the original caller, from KP Singh.

2) Generalize BPF's kallsyms handling and add BPF trampoline and dispatcher
objects to be visible in /proc/kallsyms so they can be annotated in
stack traces, from Jiri Olsa.

3) Extend BPF sockmap to allow for UDP next to existing TCP support in order
in order to enable this for BPF based socket dispatch, from Lorenz Bauer.

4) Introduce a new bpftool 'prog profile' command which attaches to existing
BPF programs via fentry and fexit hooks and reads out hardware counters
during that period, from Song Liu. Example usage:

bpftool prog profile id 337 duration 3 cycles instructions llc_misses

4228 run_cnt
3403698 cycles (84.08%)
3525294 instructions # 1.04 insn per cycle (84.05%)
13 llc_misses # 3.69 LLC misses per million isns (83.50%)

5) Batch of improvements to libbpf, bpftool and BPF selftests. Also addition
of a new bpf_link abstraction to keep in particular BPF tracing programs
attached even when the applicaion owning them exits, from Andrii Nakryiko.

6) New bpf_get_current_pid_tgid() helper for tracing to perform PID filtering
and which returns the PID as seen by the init namespace, from Carlos Neira.

7) Refactor of RISC-V JIT code to move out common pieces and addition of a
new RV32G BPF JIT compiler, from Luke Nelson.

8) Add gso_size context member to __sk_buff in order to be able to know whether
a given skb is GSO or not, from Willem de Bruijn.

9) Add a new bpf_xdp_output() helper which reuses XDP's existing perf RB output
implementation but can be called from tracepoint programs, from Eelco Chaudron.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

tools/bpf: Move linux/types.h for selftests and bpftool

Commit fe4eb069edb7 ("bpftool: Use linux/types.h from source tree for
profiler build") added a build dependency on tools/testing/selftests/bpf

tools/bpf: Move linux/types.h for selftests and bpftool

Commit fe4eb069edb7 ("bpftool: Use linux/types.h from source tree for
profiler build") added a build dependency on tools/testing/selftests/bpf
to tools/bpf/bpftool. This is suboptimal with respect to a possible
stand-alone build of bpftool.

Fix this by moving tools/testing/selftests/bpf/include/uapi/linux/types.h
to tools/include/uapi/linux/types.h.

This requires an adjustment in the include search path order for the
tests in tools/testing/selftests/bpf so that tools/include/linux/types.h
is selected when building host binaries and
tools/include/uapi/linux/types.h is selected when building bpf binaries.

Verified by compiling bpftool and the bpf selftests on x86_64 with this
change.

Fixes: fe4eb069edb7 ("bpftool: Use linux/types.h from source tree for profiler build")
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200313113105.6918-1-tklauser@distanz.ch

show more ...

bpftool: Skeleton should depend on libbpf

Add the dependency to libbpf, to fix build errors like:

In file included from skeleton/profiler.bpf.c:5:
.../bpf_helpers.h:5:10: fatal error: 'bpf_help

bpftool: Skeleton should depend on libbpf

Add the dependency to libbpf, to fix build errors like:

In file included from skeleton/profiler.bpf.c:5:
.../bpf_helpers.h:5:10: fatal error: 'bpf_helper_defs.h' file not found
#include "bpf_helper_defs.h"
^~~~~~~~~~~~~~~~~~~
1 error generated.
make: *** [skeleton/profiler.bpf.o] Error 1
make: *** Waiting for unfinished jobs....

Fixes: 47c09d6a9f67 ("bpftool: Introduce "prog profile" command")
Suggested-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200312182332.3953408-3-songliubraving@fb.com

show more ...

bpftool: Only build bpftool-prog-profile if supported by clang

bpftool-prog-profile requires clang to generate BTF for global variables.
When compared with older clang, skip this command. This is ac

bpftool: Only build bpftool-prog-profile if supported by clang

bpftool-prog-profile requires clang to generate BTF for global variables.
When compared with older clang, skip this command. This is achieved by
adding a new feature, clang-bpf-global-var, to tools/build/feature.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200312182332.3953408-2-songliubraving@fb.com

show more ...

bpftool: Use linux/types.h from source tree for profiler build

When compiling bpftool on a system where the /usr/include/asm symlink
doesn't exist (e.g. on an Ubuntu system without gcc-multilib inst

bpftool: Use linux/types.h from source tree for profiler build

When compiling bpftool on a system where the /usr/include/asm symlink
doesn't exist (e.g. on an Ubuntu system without gcc-multilib installed),
the build fails with:

CLANG skeleton/profiler.bpf.o
In file included from skeleton/profiler.bpf.c:4:
In file included from /usr/include/linux/bpf.h:11:
/usr/include/linux/types.h:5:10: fatal error: 'asm/types.h' file not found
#include <asm/types.h>
^~~~~~~~~~~~~
1 error generated.
make: *** [Makefile:123: skeleton/profiler.bpf.o] Error 1

This indicates that the build is using linux/types.h from system headers
instead of source tree headers.

To fix this, adjust the clang search path to include the necessary
headers from tools/testing/selftests/bpf/include/uapi and
tools/include/uapi. Also use __bitwise__ instead of __bitwise in
skeleton/profiler.h to avoid clashing with the definition in
tools/testing/selftests/bpf/include/uapi/linux/types.h.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200312130330.32239-1-tklauser@distanz.ch

show more ...

bpftool: Introduce "prog profile" command

With fentry/fexit programs, it is possible to profile BPF program with
hardware counters. Introduce bpftool "prog profile", which measures key
metrics of a

bpftool: Introduce "prog profile" command

With fentry/fexit programs, it is possible to profile BPF program with
hardware counters. Introduce bpftool "prog profile", which measures key
metrics of a BPF program.

bpftool prog profile command creates per-cpu perf events. Then it attaches
fentry/fexit programs to the target BPF program. The fentry program saves
perf event value to a map. The fexit program reads the perf event again,
and calculates the difference, which is the instructions/cycles used by
the target program.

Example input and output:

./bpftool prog profile id 337 duration 3 cycles instructions llc_misses

4228 run_cnt
3403698 cycles (84.08%)
3525294 instructions # 1.04 insn per cycle (84.05%)
13 llc_misses # 3.69 LLC misses per million isns (83.50%)

This command measures cycles and instructions for BPF program with id
337 for 3 seconds. The program has triggered 4228 times. The rest of the
output is similar to perf-stat. In this example, the counters were only
counting ~84% of the time because of time multiplexing of perf counters.

Note that, this approach measures cycles and instructions in very small
increments. So the fentry/fexit programs introduce noticeable errors to
the measurement results.

The fentry/fexit programs are generated with BPF skeletons. Therefore, we
build bpftool twice. The first time _bpftool is built without skeletons.
Then, _bpftool is used to generate the skeletons. The second time, bpftool
is built with skeletons.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200309173218.2739965-2-songliubraving@fb.com

show more ...

Merge drm/drm-next into drm-intel-next-queued

Some DSI and VBT pending patches from Hans will apply
cleanly and with less ugly conflicts if they are rebuilt
on top of other patches that recently lan

Merge drm/drm-next into drm-intel-next-queued

Some DSI and VBT pending patches from Hans will apply
cleanly and with less ugly conflicts if they are rebuilt
on top of other patches that recently landed on drm-next.

Reference: https://patchwork.freedesktop.org/series/70952/
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com

show more ...

Merge tag 'v5.6-rc3' into sched/core, to pick up fixes and dependent patches

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge v5.6-rc2 into drm-misc-next

Lyude needs some patches in 5.6-rc2 and we didn't bring drm-misc-next
forward yet, so it looks like a good occasion.

Signed-off-by: Maxime Ripard <maxime@cerno.tec

Merge v5.6-rc2 into drm-misc-next

Lyude needs some patches in 5.6-rc2 and we didn't bring drm-misc-next
forward yet, so it looks like a good occasion.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

show more ...

Merge v5.6-rc1 into drm-misc-fixes

We're based on v5.6, need v5.6-rc1 at least. :)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge branch 'linus' into perf/urgent, to synchronize with upstream

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Add WireGuard

2) Add HE and TWT support to ath11k driver, from John Crispin.

3

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Add WireGuard

2) Add HE and TWT support to ath11k driver, from John Crispin.

3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.

4) Add variable window congestion control to TIPC, from Jon Maloy.

5) Add BCM84881 PHY driver, from Russell King.

6) Start adding netlink support for ethtool operations, from Michal
Kubecek.

7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.

8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.

9) Add BPF dynamic program extensions, from Alexei Starovoitov.

10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.

11) Add support for macsec HW offloading, from Antoine Tenart.

12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.

13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-01-22

The following pull-request contains BPF updates for

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-01-22

The following pull-request contains BPF updates for your *net-next* tree.

We've added 92 non-merge commits during the last 16 day(s) which contain
a total of 320 files changed, 7532 insertions(+), 1448 deletions(-).

The main changes are:

1) function by function verification and program extensions from Alexei.

2) massive cleanup of selftests/bpf from Toke and Andrii.

3) batched bpf map operations from Brian and Yonghong.

4) tcp congestion control in bpf from Martin.

5) bulking for non-map xdp_redirect form Toke.

6) bpf_send_signal_thread helper from Yonghong.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'libbpf-include-path'

Toke Høiland-Jørgensen says:

====================
We are currently being somewhat inconsistent with the libbpf include paths,
which makes it difficult to move fil

Merge branch 'libbpf-include-path'

Toke Høiland-Jørgensen says:

====================
We are currently being somewhat inconsistent with the libbpf include paths,
which makes it difficult to move files from the kernel into an external
libbpf-using project without adjusting include paths.

Having the bpf/ subdir of $INCLUDEDIR in the include path has never been a
requirement for building against libbpf before, and indeed the libbpf pkg-config
file doesn't include it. So let's make all libbpf includes across the kernel
tree use the bpf/ prefix in their includes. Since bpftool skeleton generation
emits code with a libbpf include, this also ensures that those can be used in
existing external projects using the regular pkg-config include path.

This turns out to be a somewhat invasive change in the number of files touched;
however, the actual changes to files are fairly trivial (most of them are simply
made with 'sed'). The series is split to make the change for one tool subdir at
a time, while trying not to break the build along the way. It is structured like
this:

- Patch 1-3: Trivial fixes to Makefiles for issues I discovered while changing
the include paths.

- Patch 4-8: Change the include directives to use the bpf/ prefix, and updates
Makefiles to make sure tools/lib/ is part of the include path, but without
removing tools/lib/bpf

- Patch 9-11: Remove tools/lib/bpf from include paths to make sure we don't
inadvertently re-introduce includes without the bpf/ prefix.

Changelog:

v5:
- Combine the libbpf build rules in selftests Makefile (using Andrii's
suggestion for a make rule).
- Re-use self-tests libbpf build for runqslower (new patch 10)
- Formatting fixes

v4:
- Move runqslower error on missing BTF into make rule
- Make sure we don't always force a rebuild selftests
- Rebase on latest bpf-next (dropping patch 11)

v3:
- Don't add the kernel build dir to the runqslower Makefile, pass it in from
selftests instead.
- Use libbpf's 'make install_headers' in selftests instead of trying to
generate bpf_helper_defs.h in-place (to also work on read-only filesystems).
- Use a scratch builddir for both libbpf and bpftool when building in selftests.
- Revert bpf_helpers.h to quoted include instead of angled include with a bpf/
prefix.
- Fix a few style nits from Andrii

v2:
- Do a full cleanup of libbpf includes instead of just changing the
bpf_helper_defs.h include.
====================

Acked-by: Andrii Nakryiko <andriin@fb.com>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

bpftool: Use consistent include paths for libbpf

Fix bpftool to include libbpf header files with the bpf/ prefix, to be
consistent with external users of the library. Also ensure that all
includes o

bpftool: Use consistent include paths for libbpf

Fix bpftool to include libbpf header files with the bpf/ prefix, to be
consistent with external users of the library. Also ensure that all
includes of exported libbpf header files (those that are exported on 'make
install' of the library) use bracketed includes instead of quoted.

To make sure no new files are introduced that doesn't include the bpf/
prefix in its include, remove tools/lib/bpf from the include path entirely,
and use tools/lib instead.

Fixes: 6910d7d3867a ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560684.1683545.4765181397974997027.stgit@toke.dk

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.5 merge window.

Merge tag 'v5.4-rc8' into WIP.x86/mm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>