Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

tools bpftool: Don't display disassembler-four-args feature test

The feature check does not seem important enough to display.

Requested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andres Freund

tools bpftool: Don't display disassembler-four-args feature test

The feature check does not seem important enough to display.

Requested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andres Freund <andres@anarazel.de>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ben Hutchings <benh@debian.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de
Link: https://lore.kernel.org/r/20220801013834.156015-9-andres@anarazel.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

tools bpftool: Fix compilation error with new binutils

binutils changed the signature of init_disassemble_info(), which now causes
compilation to fail for tools/bpf/bpftool/jit_disasm.c, e.g. on deb

tools bpftool: Fix compilation error with new binutils

binutils changed the signature of init_disassemble_info(), which now causes
compilation to fail for tools/bpf/bpftool/jit_disasm.c, e.g. on debian
unstable.

Relevant binutils commit:

https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=60a3da00bd5407f07

Wire up the feature test and switch to init_disassemble_info_compat(),
which were introduced in prior commits, fixing the compilation failure.

I verified that bpftool can still disassemble bpf programs, both with an
old and new dis-asm.h API. There are no output changes for plain and json
formats. When comparing the output from old binutils (2.35)
to new bintuils with the patch (upstream snapshot) there are a few output
differences, but they are unrelated to this patch. An example hunk is:

2f: pop %r14
31: pop %r13
33: pop %rbx
- 34: leaveq
- 35: retq
+ 34: leave
+ 35: ret

Signed-off-by: Andres Freund <andres@anarazel.de>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ben Hutchings <benh@debian.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de
Link: https://lore.kernel.org/r/20220801013834.156015-8-andres@anarazel.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-07-09

We've added 94 non-merge commits during the last 19

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-07-09

We've added 94 non-merge commits during the last 19 day(s) which contain
a total of 125 files changed, 5141 insertions(+), 6701 deletions(-).

The main changes are:

1) Add new way for performing BTF type queries to BPF, from Daniel Müller.

2) Add inlining of calls to bpf_loop() helper when its function callback is
statically known, from Eduard Zingerman.

3) Implement BPF TCP CC framework usability improvements, from Jörn-Thorben Hinz.

4) Add LSM flavor for attaching per-cgroup BPF programs to existing LSM
hooks, from Stanislav Fomichev.

5) Remove all deprecated libbpf APIs in prep for 1.0 release, from Andrii Nakryiko.

6) Add benchmarks around local_storage to BPF selftests, from Dave Marchevsky.

7) AF_XDP sample removal (given move to libxdp) and various improvements around AF_XDP
selftests, from Magnus Karlsson & Maciej Fijalkowski.

8) Add bpftool improvements for memcg probing and bash completion, from Quentin Monnet.

9) Add arm64 JIT support for BPF-2-BPF coupled with tail calls, from Jakub Sitnicki.

10) Sockmap optimizations around throughput of UDP transmissions which have been
improved by 61%, from Cong Wang.

11) Rework perf's BPF prologue code to remove deprecated functions, from Jiri Olsa.

12) Fix sockmap teardown path to avoid sleepable sk_psock_stop, from John Fastabend.

13) Fix libbpf's cleanup around legacy kprobe/uprobe on error case, from Chuang Wang.

14) Fix libbpf's bpf_helpers.h to work with gcc for the case of its sec/pragma
macro, from James Hilliard.

15) Fix libbpf's pt_regs macros for riscv to use a0 for RC register, from Yixun Lan.

16) Fix bpftool to show the name of type BPF_OBJ_LINK, from Yafang Shao.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (94 commits)
selftests/bpf: Fix xdp_synproxy build failure if CONFIG_NF_CONNTRACK=m/n
bpf: Correctly propagate errors up from bpf_core_composites_match
libbpf: Disable SEC pragma macro on GCC
bpf: Check attach_func_proto more carefully in check_return_code
selftests/bpf: Add test involving restrict type qualifier
bpftool: Add support for KIND_RESTRICT to gen min_core_btf command
MAINTAINERS: Add entry for AF_XDP selftests files
selftests, xsk: Rename AF_XDP testing app
bpf, docs: Remove deprecated xsk libbpf APIs description
selftests/bpf: Add benchmark for local_storage RCU Tasks Trace usage
libbpf, riscv: Use a0 for RC register
libbpf: Remove unnecessary usdt_rel_ip assignments
selftests/bpf: Fix few more compiler warnings
selftests/bpf: Fix bogus uninitialized variable warning
bpftool: Remove zlib feature test from Makefile
libbpf: Cleanup the legacy uprobe_event on failed add/attach_event()
libbpf: Fix wrong variable used in perf_event_uprobe_open_legacy()
libbpf: Cleanup the legacy kprobe_event on failed add/attach_event()
selftests/bpf: Add type match test against kernel's task_struct
selftests/bpf: Add nested type to type based tests
...
====================

Link: https://lore.kernel.org/r/20220708233145.32365-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

bpftool: Remove zlib feature test from Makefile

The feature test to detect the availability of zlib in bpftool's
Makefile does not bring much. The library is not optional: it may or may
not be requi

bpftool: Remove zlib feature test from Makefile

The feature test to detect the availability of zlib in bpftool's
Makefile does not bring much. The library is not optional: it may or may
not be required along libbfd for disassembling instructions, but in any
case it is necessary to build feature.o or even libbpf, on which bpftool
depends.

If we remove the feature test, we lose the nicely formatted error
message, but we get a compiler error about "zlib.h: No such file or
directory", which is equally informative. Let's get rid of the test.

Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220705200456.285943-1-quentin@isovalent.com

show more ...

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-06-17

We've added 72 non-merge commits during the last 15

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-06-17

We've added 72 non-merge commits during the last 15 day(s) which contain
a total of 92 files changed, 4582 insertions(+), 834 deletions(-).

The main changes are:

1) Add 64 bit enum value support to BTF, from Yonghong Song.

2) Implement support for sleepable BPF uprobe programs, from Delyan Kratunov.

3) Add new BPF helpers to issue and check TCP SYN cookies without binding to a
socket especially useful in synproxy scenarios, from Maxim Mikityanskiy.

4) Fix libbpf's internal USDT address translation logic for shared libraries as
well as uprobe's symbol file offset calculation, from Andrii Nakryiko.

5) Extend libbpf to provide an API for textual representation of the various
map/prog/attach/link types and use it in bpftool, from Daniel Müller.

6) Provide BTF line info for RV64 and RV32 JITs, and fix a put_user bug in the
core seen in 32 bit when storing BPF function addresses, from Pu Lehui.

7) Fix libbpf's BTF pointer size guessing by adding a list of various aliases
for 'long' types, from Douglas Raillard.

8) Fix bpftool to readd setting rlimit since probing for memcg-based accounting
has been unreliable and caused a regression on COS, from Quentin Monnet.

9) Fix UAF in BPF cgroup's effective program computation triggered upon BPF link
detachment, from Tadeusz Struk.

10) Fix bpftool build bootstrapping during cross compilation which was pointing
to the wrong AR process, from Shahab Vahedi.

11) Fix logic bug in libbpf's is_pow_of_2 implementation, from Yuze Chi.

12) BPF hash map optimization to avoid grabbing spinlocks of all CPUs when there
is no free element. Also add a benchmark as reproducer, from Feng Zhou.

13) Fix bpftool's codegen to bail out when there's no BTF, from Michael Mullin.

14) Various minor cleanup and improvements all over the place.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
bpf: Fix bpf_skc_lookup comment wrt. return type
bpf: Fix non-static bpf_func_proto struct definitions
selftests/bpf: Don't force lld on non-x86 architectures
selftests/bpf: Add selftests for raw syncookie helpers in TC mode
bpf: Allow the new syncookie helpers to work with SKBs
selftests/bpf: Add selftests for raw syncookie helpers
bpf: Add helpers to issue and check SYN cookies in XDP
bpf: Allow helpers to accept pointers with a fixed size
bpf: Fix documentation of th_len in bpf_tcp_{gen,check}_syncookie
selftests/bpf: add tests for sleepable (uk)probes
libbpf: add support for sleepable uprobe programs
bpf: allow sleepable uprobe programs to attach
bpf: implement sleepable uprobes by chaining gps
bpf: move bpf_prog to bpf.h
libbpf: Fix internal USDT address translation logic for shared libraries
samples/bpf: Check detach prog exist or not in xdp_fwd
selftests/bpf: Avoid skipping certain subtests
selftests/bpf: Fix test_varlen verification failure with latest llvm
bpftool: Do not check return value from libbpf_set_strict_mode()
Revert "bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK"
...
====================

Link: https://lore.kernel.org/r/20220617220836.7373-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

bpftool: Fix bootstrapping during a cross compilation

This change adjusts the Makefile to use "HOSTAR" as the archive tool
to keep the sanity of the build process for the bootstrap part in
check. Fo

bpftool: Fix bootstrapping during a cross compilation

This change adjusts the Makefile to use "HOSTAR" as the archive tool
to keep the sanity of the build process for the bootstrap part in
check. For the rationale, please continue reading.

When cross compiling bpftool with buildroot, it leads to an invocation
like:

$ AR="/path/to/buildroot/host/bin/arc-linux-gcc-ar" \
CC="/path/to/buildroot/host/bin/arc-linux-gcc" \
...
make

Which in return fails while building the bootstrap section:

----------------------------------8<----------------------------------

make: Entering directory '/src/bpftool-v6.7.0/src'
... libbfd: [ on ]
... disassembler-four-args: [ on ]
... zlib: [ on ]
... libcap: [ OFF ]
... clang-bpf-co-re: [ on ] <-- triggers bootstrap

.
.
.

LINK /src/bpftool-v6.7.0/src/bootstrap/bpftool
/usr/bin/ld: /src/bpftool-v6.7.0/src/bootstrap/libbpf/libbpf.a:
error adding symbols: archive has no index; run ranlib
to add one
collect2: error: ld returned 1 exit status
make: *** [Makefile:211: /src/bpftool-v6.7.0/src/bootstrap/bpftool]
Error 1
make: *** Waiting for unfinished jobs....
AR /src/bpftool-v6.7.0/src/libbpf/libbpf.a
make[1]: Leaving directory '/src/bpftool-v6.7.0/libbpf/src'
make: Leaving directory '/src/bpftool-v6.7.0/src'

---------------------------------->8----------------------------------

This occurs because setting "AR" confuses the build process for the
bootstrap section and it calls "arc-linux-gcc-ar" to create and index
"libbpf.a" instead of the host "ar".

Signed-off-by: Shahab Vahedi <shahab@synopsys.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/bpf/8d297f0c-cfd0-ef6f-3970-6dddb3d9a87a@synopsys.com

show more ...

Merge tag 'v5.18'

Linux 5.18

Merge tag 'v5.18' into next

Sync up with mainline to get updates to OMAP4 keypad driver and other
upstream goodies.

Merge tag 'asoc-fix-v5.18-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.18

A collection of fixes that came in since the merge window, plus

Merge tag 'asoc-fix-v5.18-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.18

A collection of fixes that came in since the merge window, plus one new
device ID for an x86 laptop. Nothing that really stands out with
particularly big impact outside of the affected device.

show more ...

Merge branch 'topic/cs35l41' into for-next

Pull CS35L41 codec updates

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge drm/drm-next into drm-intel-gt-next

Pull in TTM changes needed for DG2 CCS enabling from Ram.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Let's start the 5.18 fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Let's start the 5.19 development cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branches 'fixes' and 'misc' into for-linus

Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

- Add new environment variables, USERCFLAGS and USERLD

Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.

- Fix missing fflush() bugs in Kconfig and fixdep

- Fix a minor bug in the comment format of the .config file

- Make kallsyms ignore llvm's local labels, .L*

- Fix UAPI compile-test for cross-compiling with Clang

- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.

- Clean up Makefiles

* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped

show more ...

Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one

Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.

Core
----

- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).

- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.

- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).

- Continue the work of annotating packet drop reasons throughout the
stack.

- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.

- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.

- Extend the ref_tracker to allow catching use-after-free bugs.

BPF
---

- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.

- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.

- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.

- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.

- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.

- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).

- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.

- Allow cgroup BPF progs to return custom errors to user space.

- Add support for AF_UNIX iterator batching.

- Allow iterator programs to use sleepable helpers.

- Support JIT of add, and, or, xor and xchg atomic ops on arm64.

- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.

- Large number of libbpf API improvements, cleanups and deprecations.

Protocols
---------

- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.

- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.

- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.

- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.

- Support inserting IPv6 IOAM information to a fraction of frames.

- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)

- Support setting socket and IPv6 options via cmsg on ping6 sockets.

- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.

- Add support for locked bridge ports (for 802.1X).

- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.

- IPv6 extension header handling in Open vSwitch.

- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.

- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY

- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)

- Multi-BSSID beacon handling in AP mode for WiFi.

- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events

- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements

- Increase the max PDU size in CAN ISOTP to 64 kB.

Driver API
----------

- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.

- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.

- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.

- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.

- Allow configuring completion queue event size.

- Refactor page_pool to enable fragmenting after allocation.

- Add allocation and page reuse statistics to page_pool.

- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.

- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering

New hardware / drivers
----------------------

- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches

- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6

- Mobile:
- iosm: Intel M.2 7360 WWAN card

Drivers
-------

- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.

- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support

- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions

- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP

- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support

- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports

- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload

- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches

- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock

- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets

- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode

- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices

- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915

- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan

- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)

- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"

* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...

show more ...

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-03-04

We've added 32 non-merge commits during the last 14

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-03-04

We've added 32 non-merge commits during the last 14 day(s) which contain
a total of 59 files changed, 1038 insertions(+), 473 deletions(-).

The main changes are:

1) Optimize BPF stackmap's build_id retrieval by caching last valid build_id,
as consecutive stack frames are likely to be in the same VMA and therefore
have the same build id, from Hao Luo.

2) Several improvements to arm64 BPF JIT, that is, support for JITing
the atomic[64]_fetch_add, atomic[64]_[fetch_]{and,or,xor} and lastly
atomic[64]_{xchg|cmpxchg}. Also fix the BTF line info dump for JITed
programs, from Hou Tao.

3) Optimize generic BPF map batch deletion by only enforcing synchronize_rcu()
barrier once upon return to user space, from Eric Dumazet.

4) For kernel build parse DWARF and generate BTF through pahole with enabled
multithreading, from Kui-Feng Lee.

5) BPF verifier usability improvements by making log info more concise and
replacing inv with scalar type name, from Mykola Lysenko.

6) Two follow-up fixes for BPF prog JIT pack allocator, from Song Liu.

7) Add a new Kconfig to allow for loading kernel modules with non-matching
BTF type info; their BTF info is then removed on load, from Connor O'Brien.

8) Remove reallocarray() usage from bpftool and switch to libbpf_reallocarray()
in order to fix compilation errors for older glibc, from Mauricio Vásquez.

9) Fix libbpf to error on conflicting name in BTF when type declaration
appears before the definition, from Xu Kuohai.

10) Fix issue in BPF preload for in-kernel light skeleton where loaded BPF
program fds prevent init process from setting up fd 0-2, from Yucong Sun.

11) Fix libbpf reuse of pinned perf RB map when max_entries is auto-determined
by libbpf, from Stijn Tintel.

12) Several cleanups for libbpf and a fix to enforce perf RB map #pages to be
non-zero, from Yuntao Wang.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (32 commits)
bpf: Small BPF verifier log improvements
libbpf: Add a check to ensure that page_cnt is non-zero
bpf, x86: Set header->size properly before freeing it
x86: Disable HAVE_ARCH_HUGE_VMALLOC on 32-bit x86
bpf, test_run: Fix overflow in XDP frags bpf_test_finish
selftests/bpf: Update btf_dump case for conflicting names
libbpf: Skip forward declaration when counting duplicated type names
bpf: Add some description about BPF_JIT_ALWAYS_ON in Kconfig
bpf, docs: Add a missing colon in verifier.rst
bpf: Cache the last valid build_id
libbpf: Fix BPF_MAP_TYPE_PERF_EVENT_ARRAY auto-pinning
bpf, selftests: Use raw_tp program for atomic test
bpf, arm64: Support more atomic operations
bpftool: Remove redundant slashes
bpf: Add config to allow loading modules with BTF mismatches
bpf, arm64: Feed byte-offset into bpf line info
bpf, arm64: Call build_prologue() first in first JIT pass
bpf: Fix issue with bpf preload module taking over stdout/stdin of kernel.
bpftool: Bpf skeletons assert type sizes
bpf: Cleanup comments
...
====================

Link: https://lore.kernel.org/r/20220304164313.31675-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'v5.17-rc4' into for-linus

Merge with mainline to get the Intel ASoC generic helpers header and
other changes.

bpftool: Remove redundant slashes

Because the OUTPUT variable ends with a slash but CURDIR doesn't, to keep
the _OUTPUT value consistent, we add a trailing slash to CURDIR when
defining _OUTPUT vari

bpftool: Remove redundant slashes

Because the OUTPUT variable ends with a slash but CURDIR doesn't, to keep
the _OUTPUT value consistent, we add a trailing slash to CURDIR when
defining _OUTPUT variable.

Since the _OUTPUT variable holds a value ending with a trailing slash,
there is no need to add another one when defining BOOTSTRAP_OUTPUT and
LIBBPF_OUTPUT variables. Likewise, when defining LIBBPF_INCLUDE and
LIBBPF_BOOTSTRAP_INCLUDE, we shouldn't add an extra slash either for the
same reason.

When building libbpf, the value of the DESTDIR argument should also not
end with a trailing slash.

Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220226163815.520133-1-ytcoode@gmail.com

show more ...

bpftool: Remove usage of reallocarray()

This commit fixes a compilation error on systems with glibc < 2.26 [0]:

```
In file included from main.h:14:0,
from gen.c:24:
linux/tools/in

bpftool: Remove usage of reallocarray()

This commit fixes a compilation error on systems with glibc < 2.26 [0]:

```
In file included from main.h:14:0,
from gen.c:24:
linux/tools/include/tools/libc_compat.h:11:21: error: attempt to use poisoned "reallocarray"
static inline void *reallocarray(void *ptr, size_t nmemb, size_t size)
```

This happens because gen.c pulls <bpf/libbpf_internal.h>, and then
<tools/libc_compat.h> (through main.h). When
COMPAT_NEED_REALLOCARRAY is set, libc_compat.h defines reallocarray()
which libbpf_internal.h poisons with a GCC pragma.

This commit reuses libbpf_reallocarray() implemented in commit
029258d7b228 ("libbpf: Remove any use of reallocarray() in libbpf").

v1 -> v2:
- reuse libbpf_reallocarray() instead of reimplementing it

Fixes: a9caaba399f9 ("bpftool: Implement "gen min_core_btf" logic")
Reported-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220221125617.39610-1-mauricio@kinvolk.io

[0]: https://lore.kernel.org/bpf/3bf2bd49-9f2d-a2df-5536-bc0dde70a83b@isovalent.com/

show more ...

Merge tag 'v5.17-rc4' into next

Sync up with mainline to get the latest changes in HID subsystem.

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
bpf-next 2022-02-17

We've added 29 non-merge commits during the last 8 day(s) which co

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
bpf-next 2022-02-17

We've added 29 non-merge commits during the last 8 day(s) which contain
a total of 34 files changed, 1502 insertions(+), 524 deletions(-).

The main changes are:

1) Add BTFGen support to bpftool which allows to use CO-RE in kernels without
BTF info, from Mauricio Vásquez, Rafael David Tinoco, Lorenzo Fontana and
Leonardo Di Donato. (Details: https://lpc.events/event/11/contributions/948/)

2) Prepare light skeleton to be used in both kernel module and user space
and convert bpf_preload.ko to use light skeleton, from Alexei Starovoitov.

3) Rework bpftool's versioning scheme and align with libbpf's version number;
also add linked libbpf version info to "bpftool version", from Quentin Monnet.

4) Add minimal C++ specific additions to bpftool's skeleton codegen to
facilitate use of C skeletons in C++ applications, from Andrii Nakryiko.

5) Add BPF verifier sanity check whether relative offset on kfunc calls overflows
desc->imm and reject the BPF program if the case, from Hou Tao.

6) Fix libbpf to use a dynamically allocated buffer for netlink messages to
avoid receiving truncated messages on some archs, from Toke Høiland-Jørgensen.

7) Various follow-up fixes to the JIT bpf_prog_pack allocator, from Song Liu.

8) Various BPF selftest and vmtest.sh fixes, from Yucong Sun.

9) Fix bpftool pretty print handling on dumping map keys/values when no BTF
is available, from Jiri Olsa and Yinjun Zhang.

10) Extend XDP frags selftest to check for invalid length, from Lorenzo Bianconi.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (29 commits)
bpf: bpf_prog_pack: Set proper size before freeing ro_header
selftests/bpf: Fix crash in core_reloc when bpftool btfgen fails
selftests/bpf: Fix vmtest.sh to launch smp vm.
libbpf: Fix memleak in libbpf_netlink_recv()
bpftool: Fix C++ additions to skeleton
bpftool: Fix pretty print dump for maps without BTF loaded
selftests/bpf: Test "bpftool gen min_core_btf"
bpftool: Gen min_core_btf explanation and examples
bpftool: Implement btfgen_get_btf()
bpftool: Implement "gen min_core_btf" logic
bpftool: Add gen min_core_btf command
libbpf: Expose bpf_core_{add,free}_cands() to bpftool
libbpf: Split bpf_core_apply_relo()
bpf: Reject kfunc calls that overflow insn->imm
selftests/bpf: Add Skeleton templated wrapper as an example
bpftool: Add C++-specific open/load/etc skeleton wrappers
selftests/bpf: Fix GCC11 compiler warnings in -O2 mode
bpftool: Fix the error when lookup in no-btf maps
libbpf: Use dynamically allocated buffer when receiving netlink messages
libbpf: Fix libbpf.map inheritance chain for LIBBPF_0.7.0
...
====================

Link: https://lore.kernel.org/r/20220217232027.29831-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'libbpf: Implement BTFGen'

Mauricio Vásquez <mauricio@kinvolk.io> says:

====================

CO-RE requires to have BTF information describing the kernel types in
order to perform the

Merge branch 'libbpf: Implement BTFGen'

Mauricio Vásquez <mauricio@kinvolk.io> says:

====================

CO-RE requires to have BTF information describing the kernel types in
order to perform the relocations. This is usually provided by the kernel
itself when it's configured with CONFIG_DEBUG_INFO_BTF. However, this
configuration is not enabled in all the distributions and it's not
available on kernels before 5.12.

It's possible to use CO-RE in kernels without CONFIG_DEBUG_INFO_BTF
support by providing the BTF information from an external source.
BTFHub[0] contains BTF files to each released kernel not supporting BTF,
for the most popular distributions.

Providing this BTF file for a given kernel has some challenges:
1. Each BTF file is a few MBs big, then it's not possible to ship the
eBPF program with all the BTF files needed to run in different kernels.
(The BTF files will be in the order of GBs if you want to support a high
number of kernels)
2. Downloading the BTF file for the current kernel at runtime delays the
start of the program and it's not always possible to reach an external
host to download such a file.

Providing the BTF file with the information about all the data types of
the kernel for running an eBPF program is an overkill in many of the
cases. Usually the eBPF programs access only some kernel fields.

This series implements BTFGen support in bpftool. This idea was
discussed during the "Towards truly portable eBPF"[1] presentation at
Linux Plumbers 2021.

There is a good example[2] on how to use BTFGen and BTFHub together
to generate multiple BTF files, to each existing/supported kernel,
tailored to one application. For example: a complex bpf object might
support nearly 400 kernels by having BTF files summing only 1.5 MB.

[0]: https://github.com/aquasecurity/btfhub/
[1]: https://www.youtube.com/watch?v=igJLKyP1lFk&t=2418s
[2]: https://github.com/aquasecurity/btfhub/tree/main/tools

Changelog:
v6 > v7:
- use array instead of hashmap to store ids
- use btf__add_{struct,union}() instead of memcpy()
- don't use fixed path for testing BTF file
- update example to use DECLARE_LIBBPF_OPTS()

v5 > v6:
- use BTF structure to store used member/types instead of hashmaps
- remove support for input/output folders
- remove bpf_core_{created,free}_cand_cache()
- reorganize commits to avoid having unused static functions
- remove usage of libbpf_get_error()
- fix some errno propagation issues
- do not record full types for type-based relocations
- add support for BTF_KIND_FUNC_PROTO
- implement tests based on core_reloc ones

v4 > v5:
- move some checks before invoking prog->obj->gen_loader
- use p_info() instead of printf()
- improve command output
- fix issue with record_relo_core()
- implement bash completion
- write man page
- implement some tests

v3 > v4:
- parse BTF and BTF.ext sections in bpftool and use
bpf_core_calc_relo_insn() directly
- expose less internal details from libbpf to bpftool
- implement support for enum-based relocations
- split commits in a more granular way

v2 > v3:
- expose internal libbpf APIs to bpftool instead
- implement btfgen in bpftool
- drop btf__raw_data() from libbpf

v1 > v2:
- introduce bpf_object__prepare() and ‘record_core_relos’ to expose
CO-RE relocations instead of bpf_object__reloc_info_gen()
- rename btf__save_to_file() to btf__raw_data()

v1: https://lore.kernel.org/bpf/20211027203727.208847-1-mauricio@kinvolk.io/
v2: https://lore.kernel.org/bpf/20211116164208.164245-1-mauricio@kinvolk.io/
v3: https://lore.kernel.org/bpf/20211217185654.311609-1-mauricio@kinvolk.io/
v4: https://lore.kernel.org/bpf/20220112142709.102423-1-mauricio@kinvolk.io/
v5: https://lore.kernel.org/bpf/20220128223312.1253169-1-mauricio@kinvolk.io/
v6: https://lore.kernel.org/bpf/20220209222646.348365-1-mauricio@kinvolk.io/

Mauricio Vásquez (6):
libbpf: split bpf_core_apply_relo()
libbpf: Expose bpf_core_{add,free}_cands() to bpftool
bpftool: Add gen min_core_btf command
bpftool: Implement "gen min_core_btf" logic
bpftool: Implement btfgen_get_btf()
selftests/bpf: Test "bpftool gen min_core_btf"
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

show more ...