Revision tags: v5.7-rc1 |
|
#
ff2ae607 |
| 03-Apr-2020 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a si
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed.
Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.)
All three of these have been in linux-next for a while, with no reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
show more ...
|
#
29d9f30d |
| 01-Apr-2020 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller: "Highlights:
1) Fix the iwlwifi regression, from Johannes Berg.
2) Support BSS
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller: "Highlights:
1) Fix the iwlwifi regression, from Johannes Berg.
2) Support BSS coloring and 802.11 encapsulation offloading in hardware, from John Crispin.
3) Fix some potential Spectre issues in qtnfmac, from Sergey Matyukevich.
4) Add TTL decrement action to openvswitch, from Matteo Croce.
5) Allow paralleization through flow_action setup by not taking the RTNL mutex, from Vlad Buslov.
6) A lot of zero-length array to flexible-array conversions, from Gustavo A. R. Silva.
7) Align XDP statistics names across several drivers for consistency, from Lorenzo Bianconi.
8) Add various pieces of infrastructure for offloading conntrack, and make use of it in mlx5 driver, from Paul Blakey.
9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.
10) Lots of parallelization improvements during configuration changes in mlxsw driver, from Ido Schimmel.
11) Add support to devlink for generic packet traps, which report packets dropped during ACL processing. And use them in mlxsw driver. From Jiri Pirko.
12) Support bcmgenet on ACPI, from Jeremy Linton.
13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei Starovoitov, and your's truly.
14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.
15) Fix sysfs permissions when network devices change namespaces, from Christian Brauner.
16) Add a flags element to ethtool_ops so that drivers can more simply indicate which coalescing parameters they actually support, and therefore the generic layer can validate the user's ethtool request. Use this in all drivers, from Jakub Kicinski.
17) Offload FIFO qdisc in mlxsw, from Petr Machata.
18) Support UDP sockets in sockmap, from Lorenz Bauer.
19) Fix stretch ACK bugs in several TCP congestion control modules, from Pengcheng Yang.
20) Support virtual functiosn in octeontx2 driver, from Tomasz Duszynski.
21) Add region operations for devlink and use it in ice driver to dump NVM contents, from Jacob Keller.
22) Add support for hw offload of MACSEC, from Antoine Tenart.
23) Add support for BPF programs that can be attached to LSM hooks, from KP Singh.
24) Support for multiple paths, path managers, and counters in MPTCP. From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti, and others.
25) More progress on adding the netlink interface to ethtool, from Michal Kubecek"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits) net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline cxgb4/chcr: nic-tls stats in ethtool net: dsa: fix oops while probing Marvell DSA switches net/bpfilter: remove superfluous testing message net: macb: Fix handling of fixed-link node net: dsa: ksz: Select KSZ protocol tag netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write net: stmmac: add EHL 2.5Gbps PCI info and PCI ID net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID net: stmmac: create dwmac-intel.c to contain all Intel platform net: dsa: bcm_sf2: Support specifying VLAN tag egress rule net: dsa: bcm_sf2: Add support for matching VLAN TCI net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT net: dsa: bcm_sf2: Disable learning for ASP port net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge net: dsa: b53: Prevent tagged VLAN on port 7 for 7278 net: dsa: b53: Restore VLAN entries upon (re)configuration net: dsa: bcm_sf2: Fix overflow checks hv_netvsc: Remove unnecessary round_up for recv_completion_cnt ...
show more ...
|
Revision tags: v5.6, v5.6-rc7, v5.6-rc6, v5.6-rc5 |
|
#
d198b34f |
| 03-Mar-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
.gitignore: add SPDX License Identifier
Add SPDX License Identifier to all .gitignore files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfou
.gitignore: add SPDX License Identifier
Add SPDX License Identifier to all .gitignore files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
44ef976a |
| 14-Mar-2020 |
David S. Miller <davem@davemloft.net> |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
==================== pull-request: bpf-next 2020-03-13
The following pull-request contains BPF updates for yo
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
==================== pull-request: bpf-next 2020-03-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 86 non-merge commits during the last 12 day(s) which contain a total of 107 files changed, 5771 insertions(+), 1700 deletions(-).
The main changes are:
1) Add modify_return attach type which allows to attach to a function via BPF trampoline and is run after the fentry and before the fexit programs and can pass a return code to the original caller, from KP Singh.
2) Generalize BPF's kallsyms handling and add BPF trampoline and dispatcher objects to be visible in /proc/kallsyms so they can be annotated in stack traces, from Jiri Olsa.
3) Extend BPF sockmap to allow for UDP next to existing TCP support in order in order to enable this for BPF based socket dispatch, from Lorenz Bauer.
4) Introduce a new bpftool 'prog profile' command which attaches to existing BPF programs via fentry and fexit hooks and reads out hardware counters during that period, from Song Liu. Example usage:
bpftool prog profile id 337 duration 3 cycles instructions llc_misses
4228 run_cnt 3403698 cycles (84.08%) 3525294 instructions # 1.04 insn per cycle (84.05%) 13 llc_misses # 3.69 LLC misses per million isns (83.50%)
5) Batch of improvements to libbpf, bpftool and BPF selftests. Also addition of a new bpf_link abstraction to keep in particular BPF tracing programs attached even when the applicaion owning them exits, from Andrii Nakryiko.
6) New bpf_get_current_pid_tgid() helper for tracing to perform PID filtering and which returns the PID as seen by the init namespace, from Carlos Neira.
7) Refactor of RISC-V JIT code to move out common pieces and addition of a new RV32G BPF JIT compiler, from Luke Nelson.
8) Add gso_size context member to __sk_buff in order to be able to know whether a given skb is GSO or not, from Willem de Bruijn.
9) Add a new bpf_xdp_output() helper which reuses XDP's existing perf RB output implementation but can be called from tracepoint programs, from Eelco Chaudron. ====================
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
8d830f54 |
| 12-Mar-2020 |
Song Liu <songliubraving@fb.com> |
bpftool: Add _bpftool and profiler.skel.h to .gitignore
These files are generated, so ignore them.
Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.n
bpftool: Add _bpftool and profiler.skel.h to .gitignore
These files are generated, so ignore them.
Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20200312182332.3953408-4-songliubraving@fb.com
show more ...
|
Revision tags: v5.6-rc4, v5.6-rc3, v5.6-rc2, v5.6-rc1, v5.5, v5.5-rc7, v5.5-rc6, v5.5-rc5, v5.5-rc4, v5.5-rc3, v5.5-rc2, v5.5-rc1 |
|
#
976e3645 |
| 25-Nov-2019 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 5.5 merge window.
|
Revision tags: v5.4 |
|
#
9f4813b5 |
| 19-Nov-2019 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'v5.4-rc8' into WIP.x86/mm, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
Revision tags: v5.4-rc8 |
|
#
ac94be49 |
| 15-Nov-2019 |
Thomas Gleixner <tglx@linutronix.de> |
Merge branch 'linus' into x86/hyperv
Pick up upstream fixes to avoid conflicts.
|
Revision tags: v5.4-rc7, v5.4-rc6 |
|
#
728d90bd |
| 27-Oct-2019 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.4-rc5' into next
Sync up with mainline.
|
Revision tags: v5.4-rc5, v5.4-rc4 |
|
#
112d6212 |
| 18-Oct-2019 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v5.4-rc3' into spi-5.4
Linux 5.4-rc3
|
#
fa41d6ee |
| 15-Oct-2019 |
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> |
Merge drm/drm-next into drm-intel-next-queued
Backmerging to pull in HDR DP code:
https://lists.freedesktop.org/archives/dri-devel/2019-September/236453.html
Signed-off-by: Joonas Lahtinen <joonas
Merge drm/drm-next into drm-intel-next-queued
Backmerging to pull in HDR DP code:
https://lists.freedesktop.org/archives/dri-devel/2019-September/236453.html
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
show more ...
|
Revision tags: v5.4-rc3, v5.4-rc2 |
|
#
1913c7f3 |
| 04-Oct-2019 |
Tony Lindgren <tony@atomide.com> |
Merge tag 'fix-missing-panels' into fixes
|
#
4092de1b |
| 03-Oct-2019 |
Maxime Ripard <mripard@kernel.org> |
Merge drm/drm-next into drm-misc-next
We haven't done any backmerge for a while due to the merge window, and it starts to become an issue for komeda. Let's bring 5.4-rc1 in.
Signed-off-by: Maxime R
Merge drm/drm-next into drm-misc-next
We haven't done any backmerge for a while due to the merge window, and it starts to become an issue for komeda. Let's bring 5.4-rc1 in.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
show more ...
|
#
77fdaa09 |
| 03-Oct-2019 |
Maxime Ripard <mripard@kernel.org> |
Merge drm/drm-fixes into drm-misc-fixes
We haven't backmerged for a while, let's start the -rc period by pulling rc1.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
Revision tags: v5.4-rc1 |
|
#
81160dda |
| 18-Sep-2019 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:
1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.
2) Use bio_
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:
1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.
2) Use bio_vec in the networking instead of custom skb_frag_t, from Matthew Wilcox.
3) Make use of xmit_more in r8169 driver, from Heiner Kallweit.
4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen.
5) Support all variants of 5750X bnxt_en chips, from Michael Chan.
6) More RTNL avoidance work in the core and mlx5 driver, from Vlad Buslov.
7) Add TCP syn cookies bpf helper, from Petar Penkov.
8) Add 'nettest' to selftests and use it, from David Ahern.
9) Add extack support to drop_monitor, add packet alert mode and support for HW drops, from Ido Schimmel.
10) Add VLAN offload to stmmac, from Jose Abreu.
11) Lots of devm_platform_ioremap_resource() conversions, from YueHaibing.
12) Add IONIC driver, from Shannon Nelson.
13) Several kTLS cleanups, from Jakub Kicinski.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits) mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer mlxsw: spectrum: Register CPU port with devlink mlxsw: spectrum_buffers: Prevent changing CPU port's configuration net: ena: fix incorrect update of intr_delay_resolution net: ena: fix retrieval of nonadaptive interrupt moderation intervals net: ena: fix update of interrupt moderation register net: ena: remove all old adaptive rx interrupt moderation code from ena_com net: ena: remove ena_restore_ethtool_params() and relevant fields net: ena: remove old adaptive interrupt moderation code from ena_netdev net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*() net: ena: enable the interrupt_moderation in driver_supported_features net: ena: reimplement set/get_coalesce() net: ena: switch to dim algorithm for rx adaptive interrupt moderation net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable ethtool: implement Energy Detect Powerdown support via phy-tunable xen-netfront: do not assume sk_buff_head list is empty in error handling s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb” net: ena: don't wake up tx queue when down drop_monitor: Better sanitize notified packets ...
show more ...
|
Revision tags: v5.3, v5.3-rc8 |
|
#
1e46c09e |
| 06-Sep-2019 |
David S. Miller <davem@davemloft.net> |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
==================== The following pull-request contains BPF updates for your *net-next* tree.
The main chang
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
==================== The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add the ability to use unaligned chunks in the AF_XDP umem. By relaxing where the chunks can be placed, it allows to use an arbitrary buffer size and place whenever there is a free address in the umem. Helps more seamless DPDK AF_XDP driver integration. Support for i40e, ixgbe and mlx5e, from Kevin and Maxim.
2) Addition of a wakeup flag for AF_XDP tx and fill rings so the application can wake up the kernel for rx/tx processing which avoids busy-spinning of the latter, useful when app and driver is located on the same core. Support for i40e, ixgbe and mlx5e, from Magnus and Maxim.
3) bpftool fixes for printf()-like functions so compiler can actually enforce checks, bpftool build system improvements for custom output directories, and addition of 'bpftool map freeze' command, from Quentin.
4) Support attaching/detaching XDP programs from 'bpftool net' command, from Daniel.
5) Automatic xskmap cleanup when AF_XDP socket is released, and several barrier/{read,write}_once fixes in AF_XDP code, from Björn.
6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf inclusion as well as libbpf versioning improvements, from Andrii.
7) Several new BPF kselftests for verifier precision tracking, from Alexei.
8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya.
9) And more BPF kselftest improvements all over the place, from Stanislav.
10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub.
11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan.
12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni.
13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin.
14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar.
15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari, Peter, Wei, Yue. ====================
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v5.3-rc7 |
|
#
c5a2c734 |
| 31-Aug-2019 |
Daniel Borkmann <daniel@iogearbox.net> |
Merge branch 'bpf-bpftool-build-improvements'
Quentin Monnet says:
==================== This set attempts to make it easier to build bpftool, in particular when passing a specific output directory.
Merge branch 'bpf-bpftool-build-improvements'
Quentin Monnet says:
==================== This set attempts to make it easier to build bpftool, in particular when passing a specific output directory. This is a follow-up to the conversation held last month by Lorenz, Ilya and Jakub [0].
The first patch is a minor fix to bpftool's Makefile, regarding the retrieval of kernel version (which currently prints a non-relevant make warning on some invocations).
Second patch improves the Makefile commands to support more "make" invocations, or to fix building with custom output directory. On Jakub's suggestion, a script is also added to BPF selftests in order to keep track of the supported build variants.
Building bpftool with "make tools/bpf" from the top of the repository generates files in "libbpf/" and "feature/" directories under tools/bpf/ and tools/bpf/bpftool/. The third patch ensures such directories are taken care of on "make clean", and add them to the relevant .gitignore files.
At last, fourth patch is a sligthly modified version of Ilya's fix regarding libbpf.a appearing twice on the linking command for bpftool.
[0] https://lore.kernel.org/bpf/CACAyw9-CWRHVH3TJ=Tke2x8YiLsH47sLCijdp=V+5M836R9aAA@mail.gmail.com/
v2: - Return error from check script if one of the make invocations returns non-zero (even if binary is successfully produced). - Run "make clean" from bpf/ and not only bpf/bpftool/ in that same script, when relevant. - Add a patch to clean up generated "feature/" and "libbpf/" directories. ====================
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Lorenz Bauer <lmb@cloudflare.com> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
show more ...
|
#
fbdb620b |
| 30-Aug-2019 |
Quentin Monnet <quentin.monnet@netronome.com> |
tools: bpf: account for generated feature/ and libbpf/ directories
When building "tools/bpf" from the top of the Linux repository, the build system passes a value for the $(OUTPUT) Makefile variable
tools: bpf: account for generated feature/ and libbpf/ directories
When building "tools/bpf" from the top of the Linux repository, the build system passes a value for the $(OUTPUT) Makefile variable to tools/bpf/Makefile and tools/bpf/bpftool/Makefile, which results in generating "libbpf/" (for bpftool) and "feature/" (bpf and bpftool) directories inside the tree.
This commit adds such directories to the relevant .gitignore files, and edits the Makefiles to ensure they are removed on "make clean". The use of "rm" is also made consistent throughout those Makefiles (relies on the $(RM) variable, use "--" to prevent interpreting $(OUTPUT)/$(DESTDIR) as options.
v2: - New patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
show more ...
|
Revision tags: v5.3-rc6, v5.3-rc5, v5.3-rc4, v5.3-rc3, v5.3-rc2, v5.3-rc1 |
|
#
c39f2d9d |
| 20-Jul-2019 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare second round of input updates for 5.3 merge window.
|
#
ecb41832 |
| 15-Jul-2019 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.2' into next
Sync up with mainline to resolve conflicts in iforce driver.
|
#
74acee30 |
| 10-Jul-2019 |
Jiri Kosina <jkosina@suse.cz> |
Merge branches 'for-5.2/fixes', 'for-5.3/doc', 'for-5.3/ish', 'for-5.3/logitech' and 'for-5.3/wacom' into for-linus
|
Revision tags: v5.2, v5.2-rc7 |
|
#
355a47ae |
| 26-Jun-2019 |
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> |
Merge remote-tracking branch 'drm/drm-next' into drm-misc-next-fixes
Some fixes have been accidentally pushed to this, so I cannot fost-forward. Required to pull in the remove-fbcon-notifiers fixes.
Merge remote-tracking branch 'drm/drm-next' into drm-misc-next-fixes
Some fixes have been accidentally pushed to this, so I cannot fost-forward. Required to pull in the remove-fbcon-notifiers fixes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
show more ...
|
Revision tags: v5.2-rc6, v5.2-rc5, v5.2-rc4, v5.2-rc3 |
|
#
860dbce3 |
| 02-Jun-2019 |
Yoshinori Sato <ysato@users.sourceforge.jp> |
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux
|
#
2491b544 |
| 28-May-2019 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next-queued
Get the HDR dependencies originally merged via drm-misc. Sync up all i915 changes applied via other trees. And get v5.2-rc2 as the baseline.
Signed-off
Merge drm/drm-next into drm-intel-next-queued
Get the HDR dependencies originally merged via drm-misc. Sync up all i915 changes applied via other trees. And get v5.2-rc2 as the baseline.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
show more ...
|
Revision tags: v5.2-rc2 |
|
#
374ed542 |
| 22-May-2019 |
Sean Paul <seanpaul@chromium.org> |
Merge drm/drm-next into drm-misc-next
Backmerging 5.2-rc1 to -misc-next for robher
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|