#
c0949b27 |
| 01-Oct-2015 |
Takashi Sakamoto <o-takashi@sakamocchi.jp> |
ALSA: firewire-tascam: add skeleton for TASCAM FireWire series
This commit adds a new driver for TASCAM FireWire series. In this commit, this driver just creates/removes card instance according to b
ALSA: firewire-tascam: add skeleton for TASCAM FireWire series
This commit adds a new driver for TASCAM FireWire series. In this commit, this driver just creates/removes card instance according to bus event. More functionalities will be added in following commits.
TASCAM FireWire series consists of: * PDI 1394P23 for IEEE 1394 PHY layer * PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface * XILINX XC9536XL * XILINX Spartan-II XC2S100 * ATMEL AT91M42800A
Ilya Zimnovich had investigated TASCAM FireWire series in 2011, and discover some features of his FW-1804. You can see a part of his research in FFADO project. http://subversion.ffado.org/wiki/Tascam
A part of my work are based on Ilya's investigation, while this series doesn't support the FW-1804, because of a lack of config ROM information and its protocol detail, especially for PCM channels.
I observed that FW-1884 and FW-1082 don't work properly with 1394 OHCI controller based on VT6315. The controller can actually communicate packets to these models, while these models generate no sounds. It may be due to the PHY/LINK layer issues. Using 1394 OHCI controller produced by the other vendors such as Texas Instruments may work. Or adding another node on the bus.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
#
660dd3d5 |
| 30-Sep-2015 |
Takashi Sakamoto <o-takashi@sakamocchi.jp> |
ALSA: firewire-digi00x: add hwdep interface
This commit adds hwdep interface so as the other sound drivers for units on IEEE 1394 bus have.
This interface is designed for mixer/control applications
ALSA: firewire-digi00x: add hwdep interface
This commit adds hwdep interface so as the other sound drivers for units on IEEE 1394 bus have.
This interface is designed for mixer/control applications. By using this interface, an application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
#
9edf723f |
| 30-Sep-2015 |
Takashi Sakamoto <o-takashi@sakamocchi.jp> |
ALSA: firewire-digi00x: add skeleton for Digi 002/003 family
This commit adds a new driver for Digidesign 002/003 family. This commit just creates/removes card instance according to bus event. More
ALSA: firewire-digi00x: add skeleton for Digi 002/003 family
This commit adds a new driver for Digidesign 002/003 family. This commit just creates/removes card instance according to bus event. More functions will be added in following commits.
Digidesign 002/003 family consists of: * Agere FW802B for IEEE 1394 PHY layer * PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface * ALTERA ACEX EP1K50 for IEC 61883 layer and DSP controller * ADSP-21065L for signal processing
[minor cleanup using skip_spaces() by tiwai]
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v4.3-rc3, v4.3-rc2, v4.3-rc1 |
|
#
01b944fe |
| 03-Sep-2015 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare first round of input updates for 4.3 merge window.
|
#
067e2601 |
| 01-Sep-2015 |
Jiri Kosina <jkosina@suse.cz> |
Merge branch 'for-4.3/gembird' into for-linus
|
Revision tags: v4.2 |
|
#
8d58b66e |
| 25-Aug-2015 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'v4.2-rc8' into x86/mm, before applying new changes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
Revision tags: v4.2-rc8, v4.2-rc7 |
|
#
473e0bc3 |
| 16-Aug-2015 |
Emmanuel Grumbach <emmanuel.grumbach@intel.com> |
Merge tag 'mac80211-next-for-davem-2015-08-14' into next
Another pull request for the next cycle, this time with quite a bit of content: * mesh fixes/improvements from Alexis, Bob, Chun-Yeow and Je
Merge tag 'mac80211-next-for-davem-2015-08-14' into next
Another pull request for the next cycle, this time with quite a bit of content: * mesh fixes/improvements from Alexis, Bob, Chun-Yeow and Jesse * TDLS higher bandwidth support (Arik) * OCB fixes from Bertold Van den Bergh * suspend/resume fixes from Eliad * dynamic SMPS support for minstrel-HT (Krishna Chaitanya) * VHT bitrate mask support (Lorenzo Bianconi) * better regulatory support for 5/10 MHz channels (Matthias May) * basic support for MU-MIMO to avoid the multi-vif issue (Sara Sharon) along with a number of other cleanups.
show more ...
|
Revision tags: v4.2-rc6, v4.2-rc5, v4.2-rc4 |
|
#
c57d5621 |
| 20-Jul-2015 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v4.2-rc3' into next
Sync up with Linux 4.2-rc3 to bring in infrastructure (OF) pieces.
|
Revision tags: v4.2-rc3 |
|
#
ca6e4405 |
| 15-Jul-2015 |
Daniel Vetter <daniel.vetter@ffwll.ch> |
Merge tag 'drm-intel-fixes-2015-07-15' into drm-intel-next-queued
Backmerge fixes since it's getting out of hand again with the massive split due to atomic between -next and 4.2-rc. All the bugfixes
Merge tag 'drm-intel-fixes-2015-07-15' into drm-intel-next-queued
Backmerge fixes since it's getting out of hand again with the massive split due to atomic between -next and 4.2-rc. All the bugfixes in 4.2-rc are addressed already (by converting more towards atomic instead of minimal duct-tape) so just always pick the version in next for the conflicts in modeset code.
All the other conflicts are just adjacent lines changed.
Conflicts: drivers/gpu/drm/i915/i915_drv.h drivers/gpu/drm/i915/i915_gem_gtt.c drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_drv.h drivers/gpu/drm/i915/intel_ringbuffer.h
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
show more ...
|
Revision tags: v4.2-rc2 |
|
#
06be5eef |
| 07-Jul-2015 |
Russell King <rmk+kernel@arm.linux.org.uk> |
Merge branches 'fixes' and 'ioremap' into for-linus
|
#
83dcf400 |
| 06-Jul-2015 |
Brian Norris <computersforpeace@gmail.com> |
Merge 4.2-rc1 into MTD -next
|
#
ae745302 |
| 06-Jul-2015 |
Tony Lindgren <tony@atomide.com> |
Merge branch 'fixes-rc1' into omap-for-v4.2/fixes
|
#
98006636 |
| 06-Jul-2015 |
Mauro Carvalho Chehab <mchehab@osg.samsung.com> |
Merge tag 'v4.2-rc1' into patchwork
Linux 4.2-rc1
* tag 'v4.2-rc1': (12415 commits) Linux 4.2-rc1 bluetooth: fix list handling 9p: cope with bogus responses from server in p9_client_{read,wri
Merge tag 'v4.2-rc1' into patchwork
Linux 4.2-rc1
* tag 'v4.2-rc1': (12415 commits) Linux 4.2-rc1 bluetooth: fix list handling 9p: cope with bogus responses from server in p9_client_{read,write} p9_client_write(): avoid double p9_free_req() 9p: forgetting to cancel request on interrupted zero-copy RPC dax: bdev_direct_access() may sleep block: Add support for DAX reads/writes to block devices dax: Use copy_from_iter_nocache dax: Add block size note to documentation NTB: Add split BAR output for debugfs stats NTB: Change WARN_ON_ONCE to pr_warn_once on unsafe NTB: Print driver name and version in module init NTB: Increase transport MTU to 64k from 16k NTB: Rename Intel code names to platform names NTB: Default to CPU memcpy for performance NTB: Improve performance with write combining NTB: Use NUMA memory in Intel driver NTB: Use NUMA memory and DMA chan in transport NTB: Rate limit ntb_qp_link_work NTB: Add tool test client ...
show more ...
|
Revision tags: v4.2-rc1 |
|
#
4570a371 |
| 26-Jun-2015 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai: "It was a busy development cycle at this time, as you can see a wide r
Merge tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai: "It was a busy development cycle at this time, as you can see a wide range of changes in diffstat. There are no big changes but many refactoring and improvements. Here we go some highlights:
ALSA core: - Procfs codes were cleaned up to use seq_file - Procfs can be opt out via Kconfig (only for EXPERT) - Two types of jack API were unified finally; now both kctl and input jack devs are handled via a single function call.
HD-audio: - Continued code restructuring for the future ASoC driver; now HDA controller driver is split to a core helper module. - Preliminary codes for Skylake audio support in HDA core. - Proper i915 gfx power well management for SKL & co - Enabled runtime PM as default for Intel HDMI/DP codecs - Newer Tegra chip supports - More quirks for Dell headsets, Alienware (with CA0132), etc. - A couple of DRM ELD helper API functions
ASoC: - Support for loading ASoC topology maps from firmware, intended to be used to allow self-describing DSP firmware images to be built which can map controls added by the DSP to userspace without the kernel needing to know about individual DSP firmwares - Lots of refactoring to avoid direct access to snd_soc_codec where it's not needed supporting future refactoring - Big refactoring, cleanup and enhancement for the Wolfson ADSP driver - Cleanup series for TI TAS2552 and R-CAR drivers - Fixes and improvements on RT56xx codecs - Support for TI TAS571x power amplifiers - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs - Support for x86 systems with RT5650 and Qualcomm Storm - Support for Mediatek AFE (Audio Front End) unit - Other various small fixes to ASoC codec drivers
Firewire: - Enhanced to allow non-blocking streams to use timestamp synchronization - Improve support for DM1500 and BeBoBv3
Misc: - Cleanup of old pci API functions over all PCI sound drivers - Fix long-standing regression of the old powermac i2c setup"
* tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (533 commits) ALSA: pcm: Fix pcm_class sysfs output ALSA: hda-beep: Update authors dead email address ASoC: wm_adsp: Move DSP Rate controls into the codec ASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 case ALSA: hda: provide default bus io ops extended hdac ALSA: hda: add hda link cleanup routine ALSA: hda: add hdac_ext stream creation and cleanup routines ASoC: rsrc-card: remove unused ret ALSA: HDAC: move SND_HDA_PREALLOC_SIZE to core ASoC: mediatek: Add machine driver for rt5650 rt5676 codec ASoC: mediatek: Add machine driver for MAX98090 codec ASoC: mediatek: Add AFE platform driver ASoC: rsnd: remove io from rsnd_mod ASoC: rsnd: move rsnd_mod_is_working() to rsnd_io_is_working() ASoC: rsnd: don't use rsnd_mod_to_io() on snd_kcontrol ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_src_xxx() ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_ssi_xxx() ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_dma_xxx() ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_get_adinr() ASoC: rsnd: add common interrupt handler for SSI/SRC/DMA ...
show more ...
|
Revision tags: v4.1, v4.1-rc8 |
|
#
cf8a4719 |
| 14-Jun-2015 |
Takashi Sakamoto <o-takashi@sakamocchi.jp> |
ALSA: bebob: add support for Behringer FCA 610/1616
They're based on DM1500 (ArchWave produced), and BeBoB version 3 is installed.
$ cat /proc/asound/FCA610/firewire/firmware Manufacturer: bridgeCo
ALSA: bebob: add support for Behringer FCA 610/1616
They're based on DM1500 (ArchWave produced), and BeBoB version 3 is installed.
$ cat /proc/asound/FCA610/firewire/firmware Manufacturer: bridgeCo Protocol Ver: 3 Build Ver: 0 GUID: 0x001564000002AD73 Model ID: 0x03 Model Rev: 0 Firmware Date: 20121102 Firmware Time: 153431 Firmware ID: 0x610 Firmware Ver: 8348 Base Addr: 0x400C0080 Max Size: 1422624 Loader Date: 20121015 Loader Time: 104710
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v4.1-rc7, v4.1-rc6, v4.1-rc5 |
|
#
146a5e3c |
| 24-May-2015 |
Takashi Sakamoto <o-takashi@sakamocchi.jp> |
ALSA: bebob: add Digidesign Mbox 2 Pro support
This device is based on DM1000E, and BeBoB version 1 firmware is installed.
$ cat /proc/asound/cards 0 [Pro ]: BeBoB - Mbox 2 Pro
ALSA: bebob: add Digidesign Mbox 2 Pro support
This device is based on DM1000E, and BeBoB version 1 firmware is installed.
$ cat /proc/asound/cards 0 [Pro ]: BeBoB - Mbox 2 Pro DIGIDESIGN Mbox 2 Pro (id:1, rev:1), GUID 00a07e0100a90000 at fw1.0, S400
$ cat /proc/asound/Pro/firewire/firmware Manufacturer: bridgeCo Protocol Ver: 1 Build Ver: 0 GUID: 0x00A07E0100A90000 Model ID: 0x01 Model Rev: 1 Firmware Date: 20071031 Firmware Time: 034402 Firmware ID: 0xA9 Firmware Ver: 16777215 Base Addr: 0x20080000 Max Size: 1572864 Loader Date: 20051207 Loader Time: 205554
With this patch, ALSA BeBoB driver can start packet streaming to/from this model, while as a default, internal multiplexer of this model is not initialized and generates no sound even if the driver transfers any packets with PCM samples. To hear any sounds from this model, userspace applications should be developed to set parameters to the internal multiplexer. You can see raw information in FFADO website: http://subversion.ffado.org/wiki/AvcModels/DigiDesignMboxPro2
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1 |
|
#
4ba24fef |
| 10-Feb-2015 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare first round of input updates for 3.20.
|
Revision tags: v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5 |
|
#
0c49cd29 |
| 15-Jan-2015 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v3.19-rc4' into next
Merge with mainline to bring in the latest thermal and other changes.
|
#
0a87a2db |
| 12-Jan-2015 |
Daniel Vetter <daniel.vetter@ffwll.ch> |
Merge tag 'topic/i915-hda-componentized-2015-01-12' into drm-intel-next-queued
Conflicts: drivers/gpu/drm/i915/intel_runtime_pm.c
Separate branch so that Takashi can also pull just this refactorin
Merge tag 'topic/i915-hda-componentized-2015-01-12' into drm-intel-next-queued
Conflicts: drivers/gpu/drm/i915/intel_runtime_pm.c
Separate branch so that Takashi can also pull just this refactoring into sound-next.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
show more ...
|
#
2f5eaf66 |
| 12-Jan-2015 |
Thomas Gleixner <tglx@linutronix.de> |
Merge tag 'irqchip-urgent-3.19' of git://git.infradead.org/users/jcooper/linux into irq/urgent
irqchip urgent fixes for v3.19 from Jason Cooper - mtk-sysirq: Fix error handling - hip04: Fix cpu ma
Merge tag 'irqchip-urgent-3.19' of git://git.infradead.org/users/jcooper/linux into irq/urgent
irqchip urgent fixes for v3.19 from Jason Cooper - mtk-sysirq: Fix error handling - hip04: Fix cpu map for 16bit value - gic-v3-its: Clear a warning regarding decimal constants - omap-intc: Fix legacy DMA regression - atmel-aic-common: Retain priority when changing type
show more ...
|
Revision tags: v3.19-rc4, v3.19-rc3 |
|
#
7ebdfaa5 |
| 30-Dec-2014 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'mvebu-fixes-3.19' of git://git.infradead.org/linux-mvebu into fixes
Pull "Fixes for 3.19" from Andrew Lunn:
Jason is taking a back seat this cycle and i'm doing all the patch wrangling f
Merge tag 'mvebu-fixes-3.19' of git://git.infradead.org/linux-mvebu into fixes
Pull "Fixes for 3.19" from Andrew Lunn:
Jason is taking a back seat this cycle and i'm doing all the patch wrangling for mvebu.
* tag 'mvebu-fixes-3.19' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Fix pinctrl configuration for Armada 370 DB
Also update to Linux 3.19-rc1, which this was based on.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
Revision tags: v3.19-rc2, v3.19-rc1 |
|
#
bae41e45 |
| 11-Dec-2014 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'sound-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai: "This became a fairly large pull request. In addition to the usual d
Merge tag 'sound-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai: "This became a fairly large pull request. In addition to the usual driver updates / fixes, there have been a high amount of cleanups in ASoC area, as well as control API helpers and kernel documentations fixes touching through the whole tree.
In the driver side, the biggest changes are the support for new Intel SoC found on new x86 machines, and the updates of FireWire dice and oxfw drivers.
Some remarkable items are below:
ALSA core: - PCM mmap code cleanup, removal of arch-dependent codes - PCM xrun injection support - PCM hwptr tracepoint support - Refactoring of snd_pcm_action(), simplification of PCM locking - Robustified sequecner auto-load functionality - New control API helpers and lots of cleanups along with them - Lots of kerneldoc fixes and cleanups
USB-audio: - The mixer resume code was largely rewritten, and the devices with quirks are resumed properly. - New hardware support: Focusrite Scarlett, Digidesign Mbox1, Denon/Marantz DACs, Zoom R16/24
FireWire: - DICE driver updates with better duplex and sync support, including MIDI support - New OXFW driver for Oxford Semiconductor FW970/971 chipset, including the previous LaCie Speakers device. Fullduplex and MIDI support included as well as DICE driver.
HD-audio: - Refactoring the driver-caps quirk handling in snd-hda-intel - More consistent control names representing the topology better - Fixups: HP mute LED with ALC268 codec, Ideapad S210 built-in mic fix, ASUS Z99He laptop EAPD
ASoC: - Conversion of AC'97 drivers to use regmap, bringing us closer to the removal of the ASoC level I/O code - Clean up a lot of old drivers that were open coding things that have subsequently been implemented in the core - Some DAPM performance improvements - Removal of the now seldom used CODEC mutex - Lots of updates for the newer Intel SoC support, including support for the DSP and some Cherrytrail and Braswell machine drivers - Support for Samsung boards using rt5631 as the CODEC - Removal of the obsolete AFEB9260 machine driver - Driver support for the TI TS3A227E headset driver used in some Chrombeooks
Others: - ASIHPI driver update and cleanups - Lots of dev_*() printk conversions - Lots of trivial cleanups for the codes spotted by Coccinelle"
* tag 'sound-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (594 commits) ALSA: pcxhr: NULL dereference on probe failure ALSA: lola: NULL dereference on probe failure ALSA: hda - Add "eapd" model string for AD1986A codec ALSA: hda - Add EAPD fixup for ASUS Z99He laptop ALSA: oxfw: Add hwdep interface ALSA: oxfw: Add support for capture/playback MIDI messages ALSA: oxfw: add support for capturing PCM samples ALSA: oxfw: Add support AMDTP in-stream ALSA: oxfw: Add support for Behringer/Mackie devices ALSA: oxfw: Change the way to start stream ALSA: oxfw: Add proc interface for debugging purpose ALSA: oxfw: Change the way to make PCM rules/constraints ALSA: oxfw: Add support for AV/C stream format command to get/set supported stream formation ALSA: oxfw: Change the way to name card ALSA: dice: Add support for MIDI capture/playback ALSA: dice: Add support for capturing PCM samples ALSA: dice: Support for non SYT-Match sampling clock source mode ALSA: dice: Add support for duplex streams with synchronization ALSA: dice: Change the way to start stream ALSA: jack: Add dummy snd_jack_set_key() definition ...
show more ...
|
#
8985f4ac |
| 08-Dec-2014 |
Takashi Sakamoto <o-takashi@sakamocchi.jp> |
ALSA: oxfw: Add hwdep interface
This interface is designed for mixer/control application. By using this interface, an application can get information about firewire node, can lock/unlock kernel stre
ALSA: oxfw: Add hwdep interface
This interface is designed for mixer/control application. By using this interface, an application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
#
ec4dba50 |
| 08-Dec-2014 |
Takashi Sakamoto <o-takashi@sakamocchi.jp> |
ALSA: oxfw: Add support for Behringer/Mackie devices
Some devices produced by Behringer/Mackie are based on OXFW970/971. This commit adds support for them. Additionally, this commit changes the way
ALSA: oxfw: Add support for Behringer/Mackie devices
Some devices produced by Behringer/Mackie are based on OXFW970/971. This commit adds support for them. Additionally, this commit changes the way to name card with some information in config rom.
Ids of some Mackie(Loud) models are not identified, therefore this commit applies name detection for these models.
The devices support capture/playback of PCM-samples and some of them supports capture/playback of MIDI messages. These functionalities are implemented by followed commits.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
#
69dcf3e4 |
| 08-Dec-2014 |
Takashi Sakamoto <o-takashi@sakamocchi.jp> |
ALSA: dice: Add support for capturing PCM samples
This commit adds a support for capturing PCM samples.
When opposite PCM substream is already running, available sampling rate is limited at current
ALSA: dice: Add support for capturing PCM samples
This commit adds a support for capturing PCM samples.
When opposite PCM substream is already running, available sampling rate is limited at current one.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|