Merge drm/drm-next into drm-misc-next-fixes

Backmerging from drm/drm-next for the final fixes that will go
into v5.20.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v5.19-rc5' into next

Merge with mainline to bring up the latest definition from MFD subsystem
needed for Mediatek keypad driver.

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major -

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get new regmap APIs of v5.19-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'topic/ctl-enhancements' into for-next

Pull ALSA control enhancement patches.
One is the faster lookup of control elements, and another is to
introduce the input data validation.

Signe

Merge branch 'topic/ctl-enhancements' into for-next

Pull ALSA control enhancement patches.
One is the faster lookup of control elements, and another is to
introduce the input data validation.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 5.19, take #1

- Typo fix in arch/riscv/kvm/vmid.c

- Remove broken reference pattern from MAIN

Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 5.19, take #1

- Typo fix in arch/riscv/kvm/vmid.c

- Remove broken reference pattern from MAINTAINERS entry

show more ...

Merge v5.19-rc1 into drm-misc-fixes

Let's kick-off the start of the 5.19 fix cycle

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v5.19-rc1' into asoc-5.19

Linux 5.19-rc1

Merge tag 'hardening-v5.19-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull kernel hardening fix from Kees Cook:
"This fixes an unlucky build race condition when using the

Merge tag 'hardening-v5.19-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull kernel hardening fix from Kees Cook:
"This fixes an unlucky build race condition when using the GCC plugins,
noticed by a few folks.

- Avoid GCC plugins needing utsrelease.h build target (Masahiro Yamada)"

* tag 'hardening-v5.19-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: use KERNELVERSION for plugin version

show more ...

Merge tag 'kernel-hardening-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull kernel hardening updates from Kees Cook:

- usercopy hardening expanded to check other alloca

Merge tag 'kernel-hardening-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull kernel hardening updates from Kees Cook:

- usercopy hardening expanded to check other allocation types (Matthew
Wilcox, Yuanzheng Song)

- arm64 stackleak behavioral improvements (Mark Rutland)

- arm64 CFI code gen improvement (Sami Tolvanen)

- LoadPin LSM block dev API adjustment (Christoph Hellwig)

- Clang randstruct support (Bill Wendling, Kees Cook)

* tag 'kernel-hardening-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (34 commits)
loadpin: stop using bdevname
mm: usercopy: move the virt_addr_valid() below the is_vmalloc_addr()
gcc-plugins: randstruct: Remove cast exception handling
af_unix: Silence randstruct GCC plugin warning
niu: Silence randstruct warnings
big_keys: Use struct for internal payload
gcc-plugins: Change all version strings match kernel
randomize_kstack: Improve docs on requirements/rationale
lkdtm/stackleak: fix CONFIG_GCC_PLUGIN_STACKLEAK=n
arm64: entry: use stackleak_erase_on_task_stack()
stackleak: add on/off stack variants
lkdtm/stackleak: check stack boundaries
lkdtm/stackleak: prevent unexpected stack usage
lkdtm/stackleak: rework boundary management
lkdtm/stackleak: avoid spurious failure
stackleak: rework poison scanning
stackleak: rework stack high bound handling
stackleak: clarify variable names
stackleak: rework stack low bound handling
stackleak: remove redundant check
...

show more ...

gcc-plugins: use KERNELVERSION for plugin version

Commit 61f60bac8c05 ("gcc-plugins: Change all version strings match
kernel") broke parallel builds.

Instead of adding the dependency between GCC pl

gcc-plugins: use KERNELVERSION for plugin version

Commit 61f60bac8c05 ("gcc-plugins: Change all version strings match
kernel") broke parallel builds.

Instead of adding the dependency between GCC plugins and utsrelease.h,
let's use KERNELVERSION, which does not require any build artifact.

Another reason why I want to avoid utsrelease.h is because it depends
on CONFIG_LOCALVERSION(_AUTO) and localversion* files.

(include/generated/utsrelease.h depends on include/config/kernel.release,
which is generated by scripts/setlocalversion)

I want to keep host tools independent of the kernel configuration.

There is no good reason to rebuild GCC plugins just because of
CONFIG_LOCALVERSION being changed.

We just want to associate the plugin versions with the kernel source
version. KERNELVERSION should be enough for our purpose.

Fixes: 61f60bac8c05 ("gcc-plugins: Change all version strings match kernel")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-mm/202205230239.EZxeZ3Fv-lkp@intel.com
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220524135541.1453693-1-masahiroy@kernel.org

show more ...

gcc-plugins: Change all version strings match kernel

It's not meaningful for the GCC plugins to track their versions separately
from the rest of the kernel. Switch all versions to the kernel version

gcc-plugins: Change all version strings match kernel

It's not meaningful for the GCC plugins to track their versions separately
from the rest of the kernel. Switch all versions to the kernel version.

Fix mismatched indenting while we're at it.

Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

show more ...

randstruct: Move seed generation into scripts/basic/

To enable Clang randstruct support, move the structure layout
randomization seed generation out of scripts/gcc-plugins/ into
scripts/basic/ so it

randstruct: Move seed generation into scripts/basic/

To enable Clang randstruct support, move the structure layout
randomization seed generation out of scripts/gcc-plugins/ into
scripts/basic/ so it happens early enough that it can be used by either
compiler implementation. The gcc-plugin still builds its own header file,
but now does so from the common "randstruct.seed" file.

Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503205503.3054173-6-keescook@chromium.org

show more ...

Merge tag 'v5.13-rc2' into spi-5.13

Linux 5.13-rc2

Merge branch 'fixes-rc1' into fixes

Merge branch 'next' into for-linus

Prepare input updates for 5.13 merge window.

Merge tag 'v5.12-rc8' into sched/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v5.12-rc7' into ecryptfs/next

Required to pick up idmapped mount changes which changed some function
parameters.

Merge tags 'ib-mfd-clk-gpio-regulator-rtc-v5.13', 'ib-mfd-extcon-v5.13', 'ib-mfd-input-v5.13-1', 'ib-mfd-platform-x86-v5.13', 'ib-mfd-power-v5.13', 'ib-mfd-pwm-rtc-v5.13-1' and 'ib-regulator-list-ram

Merge tags 'ib-mfd-clk-gpio-regulator-rtc-v5.13', 'ib-mfd-extcon-v5.13', 'ib-mfd-input-v5.13-1', 'ib-mfd-platform-x86-v5.13', 'ib-mfd-power-v5.13', 'ib-mfd-pwm-rtc-v5.13-1' and 'ib-regulator-list-ramp-helpers-v5.13' into ibs-for-mfd-merged

Immutable branch between MFD, Clock, GPIO, Regulator and RTC due for the v5.13 merge window

Immutable branch between MFD and Extcon due for the v5.13 merge window

Immutable branch between MFD and Input due for the v5.13 merge window

Immutable branch between MFD and Platform/x86 due for the v5.13 merge window

Immutable branch between MFD and Power due for the v5.13 merge window

Immutable branch between MFD, PWM and RTC due for the v5.13 merge window

show more ...

Merge drm/drm-next into drm-intel-next

Sync up with topic/i915-gem-next and drm-intel-gt-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge series "Support ROHM BD71815 PMIC" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

Patch series introducing support for ROHM BD71815 PMIC

ROHM BD71815 is a power management IC used

Merge series "Support ROHM BD71815 PMIC" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

Patch series introducing support for ROHM BD71815 PMIC

ROHM BD71815 is a power management IC used in some battery powered
systems. It contains regulators, GPO(s), charger + coulomb counter, RTC
and a clock gate.

All regulators can be controlled via I2C. LDO4 can additionally be set to
be enabled/disabled by a GPIO. LDO3 voltage could be selected from two
voltages written into separate VSEL reisters using GPIO but this mode is
not supported by driver. On top of that the PMIC has the typical HW
state machine which is present also on many other ROHM PMICs.

IC contains two GPOs - but one of the GPOs is marked as GND in
data-sheet. Thus the driver by default only exposes one GPO. The second
GPO can be enabled by special DT property.

RTC is almost similar to what is on BD71828. For currently used features
only the register address offset to RTC block differs.

The charger driver is not included in this series. ROHM has a charger
driver with some fuel-gauging logig written in but this is not included
here. I am working on separating the logic from HW specific driver and
supporting both BD71815 and BD71828 chargers in separate patch series.

Changelog v5:
Regulator:
- Added regmap helper for regulator ramp-delay and taken it in use
(patches 13, 14, 16 - they can be just dropped if ramp-delay helper is not
a good idea. Patch 15 implements old-fashioned ramp-delay)
GPIO:
- styling changes to GPIO (Mostly suggested by Andy)
- implemented init_valid_mask (but can't count on it yet)
Changelog v4:
- Sorted ROHM chip ID enum
- Statcized DVS structures in regulator driver
- Minor styling for regulator driver
- rebased on v5.12-rc4
Changelog v3:
- GPIO clean-up as suggested by Bartosz
- MFD clean-up as suggested by Lee
- clk-mode dt-binding handling in MFD driver corrected to reflect new
property values.
- Dropped already applied patches
- Rebased on v5.12-rc2
Changelog v2:
- Rebased on top of v5.11-rc3
- Added another "preliminary patch" which fixes HW-dvs voltage
handling (patch 1)
- split regulator patch to two.
- changed dt-binding patch ordering.
regulators:
- staticized probe
- removed some unnecessary defines
- updated comments
- split rohm-regulator patch adding SNVS and supporting simple
linear mapping into two - one adding support for mapping, other
adding SNVS.
GPIO:
- removed unnecessary headers
- clarified dev/parent->dev usage
- removed forgotten #define DEBUG
dt-bindings:
- changed patch order to meet ref-dependencies
- added missing regulator nodes
- changed string property for clk mode to tristated
MFD:
- header cleanups.
CLK:
- fixed commit message

--

Matti Vaittinen (19):
rtc: bd70528: Do not require parent data
mfd: bd718x7: simplify by cleaning unnecessary device data
dt_bindings: bd71828: Add clock output mode
dt_bindings: regulator: Add ROHM BD71815 PMIC regulators
dt_bindings: mfd: Add ROHM BD71815 PMIC
mfd: Add ROHM BD71815 ID
mfd: Sort ROHM chip ID list for better readability
mfd: Support for ROHM BD71815 PMIC core
gpio: support ROHM BD71815 GPOs
regulator: helpers: Export helper voltage listing
regulator: rohm-regulator: linear voltage support
regulator: rohm-regulator: Support SNVS HW state.
regulator: Add regmap helper for ramp-delay setting
regulator: bd718x7, bd71828: Use ramp-delay helper
regulator: Support ROHM BD71815 regulators
regulator: bd71815: use ramp-delay helper
clk: bd718x7: Add support for clk gate on ROHM BD71815 PMIC
rtc: bd70528: Support RTC on ROHM BD71815
MAINTAINERS: Add ROHM BD71815AGW

.../bindings/mfd/rohm,bd71815-pmic.yaml | 201 ++++++
.../bindings/mfd/rohm,bd71828-pmic.yaml | 6 +
.../regulator/rohm,bd71815-regulator.yaml | 116 ++++
MAINTAINERS | 3 +
drivers/clk/clk-bd718x7.c | 9 +-
drivers/gpio/Kconfig | 10 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-bd71815.c | 193 ++++++
drivers/mfd/Kconfig | 15 +-
drivers/mfd/rohm-bd71828.c | 486 +++++++++----
drivers/mfd/rohm-bd718x7.c | 43 +-
drivers/regulator/Kconfig | 11 +
drivers/regulator/Makefile | 1 +
drivers/regulator/bd71815-regulator.c | 651 ++++++++++++++++++
drivers/regulator/bd71828-regulator.c | 51 +-
drivers/regulator/bd718x7-regulator.c | 60 +-
drivers/regulator/helpers.c | 101 ++-
drivers/regulator/rohm-regulator.c | 23 +-
drivers/rtc/Kconfig | 6 +-
drivers/rtc/rtc-bd70528.c | 104 +--
include/linux/mfd/rohm-bd71815.h | 562 +++++++++++++++
include/linux/mfd/rohm-bd71828.h | 3 +
include/linux/mfd/rohm-bd718x7.h | 13 -
include/linux/mfd/rohm-generic.h | 15 +-
include/linux/regulator/driver.h | 7 +
25 files changed, 2393 insertions(+), 298 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
create mode 100644 drivers/gpio/gpio-bd71815.c
create mode 100644 drivers/regulator/bd71815-regulator.c
create mode 100644 include/linux/mfd/rohm-bd71815.h

base-commit: 0d02ec6b3136c73c09e7859f0d0e4e2c4c07b49b
--
2.25.4

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]

show more ...

Merge tag 'mute-led-rework' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.13

ALSA: control - add generic LED API

This patchset tries to resolve the diversity in the aud

Merge tag 'mute-led-rework' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.13

ALSA: control - add generic LED API

This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.

A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).

The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.

The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).

snd_ctl_led 24576 0

The sound driver implementation is really easy:

1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED

Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge tag 'tags/mute-led-rework' into for-next

ALSA: control - add generic LED API

This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer

Merge tag 'tags/mute-led-rework' into for-next

ALSA: control - add generic LED API

This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.

A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).

The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.

The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).

snd_ctl_led 24576 0

The sound driver implementation is really easy:

1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED

Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up fixes sent via perf/urgent and in the BPF tools/ directories.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Signed-off-by: David S. Miller <davem@davemloft.net>