arm64: dts: renesas: Remove unneeded status from thermal nodes

The thermal device is supposed to be always enabled. As the default
value of the status property is "okay", there is no need to make t

arm64: dts: renesas: Remove unneeded status from thermal nodes

The thermal device is supposed to be always enabled. As the default
value of the status property is "okay", there is no need to make this
explicit in SoC-specific .dtsi files where no override is involved.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: r8a77965: add FDP1 device nodes

The r8a77965 has a single FDP1 instance.

Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard

arm64: dts: r8a77965: add FDP1 device nodes

The r8a77965 has a single FDP1 instance.

Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: r8a77965: Fix clock/reset for usb2_phy1

usb2_phy1 accidentally uses the same clock/reset as usb2_phy0.

Fixes: b5857630a829a8d5 ("arm64: dts: renesas: r8a77965: add usb2_phy nod

arm64: dts: renesas: r8a77965: Fix clock/reset for usb2_phy1

usb2_phy1 accidentally uses the same clock/reset as usb2_phy0.

Fixes: b5857630a829a8d5 ("arm64: dts: renesas: r8a77965: add usb2_phy nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: r8a77965: Fix HS-USB compatible

Should be "renesas,usbhs-r8a77965", not "renesas,usbhs-r8a7796".

Fixes: a06e8af801760a98 ("arm64: dts: renesas: r8a77965: add HS-USB node")
Sign

arm64: dts: renesas: r8a77965: Fix HS-USB compatible

Should be "renesas,usbhs-r8a77965", not "renesas,usbhs-r8a7796".

Fixes: a06e8af801760a98 ("arm64: dts: renesas: r8a77965: add HS-USB node")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: r8a77965: Move timer node

To preserve alphabetical sort order.

Fixes: 4c529600eef0a6b7 ("arm64: dts: renesas: r8a77965: Add R-Car Gen3 thermal support")
Signed-off-by: Geert Uy

arm64: dts: renesas: r8a77965: Move timer node

To preserve alphabetical sort order.

Fixes: 4c529600eef0a6b7 ("arm64: dts: renesas: r8a77965: Add R-Car Gen3 thermal support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: Fix whitespace around assignments

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: updated for a few new cases]
Signed-off-by: Simon Horman <horms+renesas@ver

arm64: dts: renesas: Fix whitespace around assignments

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: updated for a few new cases]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: r8a77965: Add OPPs table for cpu devices

This patch adds OPPs table for CA57{0,1} cpu devices

Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Takeshi Kihara

arm64: dts: renesas: r8a77965: Add OPPs table for cpu devices

This patch adds OPPs table for CA57{0,1} cpu devices

Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
[simon: do not give nodes unit names as they have no bus addresses]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: r8a77965: Add CAN{0,1} placeholder nodes

According to R-Car Gen3 HW manual rev1.00, R-Car M3-N has two CAN
interfaces, similar to H3, M3-W and other SoCs from the same family.

arm64: dts: renesas: r8a77965: Add CAN{0,1} placeholder nodes

According to R-Car Gen3 HW manual rev1.00, R-Car M3-N has two CAN
interfaces, similar to H3, M3-W and other SoCs from the same family.

Add CAN placeholder nodes to avoid below DTC errors:
Error: arch/arm64/boot/dts/renesas/ulcb-kf.dtsi:19.1-6 Label or path can0 not found
Error: arch/arm64/boot/dts/renesas/ulcb-kf.dtsi:25.1-6 Label or path can1 not found

These errors occur *after* the addition of r8a77965-m3nulcb-kf.dts.
Fix them beforehand.

CAN support is inspired from below commits:
- v4.7 commit 308b7e4ba62e ("arm64: dts: r8a7795: Add CAN support")
- v4.11 commit 909c16252415 ("arm64: dts: r8a7796: Add CAN support")
- v4.12 commit bec0948e810f ("arm64: dts: r8a7796: Add reset control properties")

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
[simon: make placeholder minimal by only including reg property]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: r8a77965: Attach the SYS-DMAC to the IPMMU

For R-Car M3-N hook up SYS-DMAC0, SYS-DMAC1 and SYS-DMAC2 to
IPMMU-DS0 and IPMMU-DS1 in same way as for R-Car M3-W.
This follows the R

arm64: dts: renesas: r8a77965: Attach the SYS-DMAC to the IPMMU

For R-Car M3-N hook up SYS-DMAC0, SYS-DMAC1 and SYS-DMAC2 to
IPMMU-DS0 and IPMMU-DS1 in same way as for R-Car M3-W.
This follows the R-Car Gen3 Rev.1.00 (April 2018) datasheet.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: r8a77965: Add SATA controller node

This patch adds SATA controller node for the R8A77965 SoC.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[wsa: rebased to ups

arm64: dts: renesas: r8a77965: Add SATA controller node

This patch adds SATA controller node for the R8A77965 SoC.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[wsa: rebased to upstream base]
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge tag 'v4.19-rc2' into next-general

Sync to Linux 4.19-rc2 for downstream developers.

Merge tag 'v4.19-rc1' into asoc-4.19

Linux 4.19-rc1

Merge branch 'perm-fix' into omap-for-v4.19/fixes-v2

Merge drm/drm-next into drm-misc-next

Now that 4.19-rc1 is cut, backmerge it into -misc-next.

Signed-off-by: Sean Paul <seanpaul@chromium.org>

arm64: dts: renesas: Include R-Car product name in DTSI files

Browsing the DTS for all the R-Car SoCs with similar part numbers
makes my head hurt, so to improve the user friendliness of the
DTS cod

arm64: dts: renesas: Include R-Car product name in DTSI files

Browsing the DTS for all the R-Car SoCs with similar part numbers
makes my head hurt, so to improve the user friendliness of the
DTS code base include R-Car product name in each DTSI file.

Product names are derived from
Documentation/devicetree/bindings/arm/shmobile.txt

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Olof Johansson:
"Business as usual -- the bulk of our changes are to devicetree

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Olof Johansson:
"Business as usual -- the bulk of our changes are to devicetree files
with new hardware support, new SoCs and platforms, and new board
types.

New SoCs/platforms:
- Raspberry Pi Compute Module (CM1) and IO board
- i.MX6SSL from NXP
- Renesas RZ/N1D SoC (R9A06G032), Dual Cortex-A7 with Ethernet, CAN
and PLC interfaces
- TI AM654 SoC, Quad Cortex-A53, safety subsystem with Cortex-R5
controllers, communication and PRU subsystem and lots of other
interfaces (PCIe, USB3, etc).

New boards and systems:
- Several Atmel at91-based boards from Laird
- Marvell Armada388-based Helios4 board from SolidRun
- Samsung Aires-based phones (s5pv210)
- Allwinner A64-based Pinebook laptop

In addition to the above, there's the usual amount of new devices
described on existing platforms, fixes and tweaks and new minor
variants of boards/platforms"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (478 commits)
arm64: dts: sdm845: Add tsens nodes
arm64: dts: msm8996: thermal: Initialise via DT and add second controller
arm64: dts: sprd: Add one suspend timer
arm64: dts: sprd: Add SC27XX ADC device
arm64: dts: sprd: Add SC27XX eFuse device
arm64: dts: sprd: Add SC27XX vibrator device
arm64: dts: sprd: Add SC27XX breathing light controller device
arm64: dts: meson-axg: add spdif-dit codec
arm64: dts: meson-axg: add lineout codec
arm64: dts: meson-axg: add linein codec
arm64: dts: meson-axg: add tdm interfaces
arm64: dts: meson-axg: add tdmout formatters
arm64: dts: meson-axg: add tdmin formatters
arm64: dts: meson-axg: add spdifout
arm64: dts: rockchip: add led support for Firefly-RK3399
arm64: dts: rockchip: remove deprecated Type-C PHY properties on rk3399
arm64: dts: rockchip: add power button support for Firefly-RK3399
ARM: dts: aspeed: Add coprocessor interrupt controller
arm64: dts: meson-axg: add audio arb reset controller
arm64: dts: meson-axg: add usb power regulator
...

show more ...

Merge branch 'for-4.19/cougar' into for-linus

New device support for hid-cougar

Merge branch 'iomap-write' into linux-gfs2/for-next

Pull in the gfs2 iomap-write changes: Tweak the existing code to
properly support iomap write and eliminate an unnecessary special case
in gfs2_bl

Merge branch 'iomap-write' into linux-gfs2/for-next

Pull in the gfs2 iomap-write changes: Tweak the existing code to
properly support iomap write and eliminate an unnecessary special case
in gfs2_block_map. Implement iomap write support for buffered and
direct I/O. Simplify some of the existing code and eliminate code that
is no longer used:

gfs2: Remove gfs2_write_{begin,end}
gfs2: iomap direct I/O support
gfs2: gfs2_extent_length cleanup
gfs2: iomap buffered write support
gfs2: Further iomap cleanups

This is based on the following changes on the xfs 'iomap-4.19-merge'
branch:

iomap: add private pointer to struct iomap
iomap: add a page_done callback
iomap: generic inline data handling
iomap: complete partial direct I/O writes synchronously
iomap: mark newly allocated buffer heads as new
fs: factor out a __generic_write_end helper

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

show more ...

Merge drm/drm-next into drm-intel-next-queued

We need a backmerge to get DP_DPCD_REV_14 before we push other
i915 changes to dinq that could break compilation.

Signed-off-by: Rodrigo Vivi <rodrigo.

Merge drm/drm-next into drm-intel-next-queued

We need a backmerge to get DP_DPCD_REV_14 before we push other
i915 changes to dinq that could break compilation.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge tag 'renesas-arm64-dt2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v4.19

Corrections:

* Re

Merge tag 'renesas-arm64-dt2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v4.19

Corrections:

* Remove non-existing STBE region from Ether-AVB node in DT of
R-Car E3 (r8a77990) SoC

Cleanups:

* Consistently use rwdt as label for Renesas Watchdog Timer devices
* Add second port to rcar_sound placeholder in DT of R-Car M3-N (r8a77965) SoC
* Fix adv7482 decimal unit addresses in DT of Salvator-X and -XS boards

Enhancements:

* Describe in DT:
- INTC-EX of R-Car V3H (r8a77980) SoC
- USB3.0 of R-Car E3 (r8a77980) SoC
- All SCIF and HSCIF devices of R-Car D3 (r8a77995) SoC.
Previously only SCIF2, used as the debug consile, was described.
- All IPMMU devicesof R-Car M3-N (r8a77965), V3H (r8a77980) and
E3 (r8a77990) SoCs
* Enable USB3.0 in DT of R-Car E3 (r8a77980) based Ebisu board
* Prefer HSCIF1 over SCIF1 in DT of Salvator-X and -XS boards

* tag 'renesas-arm64-dt2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: r8a77980: add INTC-EX support
arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board
arm64: dts: renesas: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes
arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes
arm64: dts: renesas: Unify the labels for RWDT
arm64: dts: renesas: salvator-common: Prefer HSCIF1 over SCIF1
arm64: dts: renesas: r8a77965: Add second port to rcar_sound placeholder
arm64: dts: renesas: salvator-common: Fix adv7482 decimal unit addresses
arm64: dts: renesas: r8a77990: Remove non-existing STBE region

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes

Add IPMMU device nodes for the R-Car M3-N (r8a77965),
V3H (r8a77980) and E3 (r8a77990) SoCs.

* The r8a77965 IPMMU is quite similar to

arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes

Add IPMMU device nodes for the R-Car M3-N (r8a77965),
V3H (r8a77980) and E3 (r8a77990) SoCs.

* The r8a77965 IPMMU is quite similar to r8a7796 however VP0
has been added and PV1 has been removed. Also the IMSSTR
bit assignment has been reworked.

* The r8a77980 IPMMU is quite similar to r8a77970 however VC0
has been added. The IMSSTR bit assignment has also been
reworked. Power domains are also quite different however the
the documentation is rather unclear about this topic.

Until we know better VC0 gets assigned to R8A77980_PD_ALWAYS_ON.

* The r8a77990 IPMMU is similar to r8a77995. Power domains are
however different and the public documentation is still unclear.

Based on preliminary information from the hardware team the R-Car E3
SoC comes with an IPMMU-VP0 device in an Always-on power domain and
the IPMMU-VC0 is placed as expected in the A3VC power domain.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: Unify the labels for RWDT

The labels for RWDT device node were named as 2 types now:

- wdt0: r8a7795, r8a7796, r8a77965.
- rwdt: r8a77970, r8a77990, r8a77995.

To be made con

arm64: dts: renesas: Unify the labels for RWDT

The labels for RWDT device node were named as 2 types now:

- wdt0: r8a7795, r8a7796, r8a77965.
- rwdt: r8a77970, r8a77990, r8a77995.

To be made consistent, this patch unifis the labels as the hardware
name "rwdt".

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge tag 'renesas-arm64-dt-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM64 Based SoC DT Updates for v4.19

* All applicable R-Car Gen 3 SoCs

Merge tag 'renesas-arm64-dt-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM64 Based SoC DT Updates for v4.19

* All applicable R-Car Gen 3 SoCs
- Correct VSPD registers range
- Convert R-Car Gen3 SoC and board DT files to SPDX identifiers

* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
- Salvator-X and Salvator-XS boards
+ Describe HSCIF1 device
+ Correct I2C ch4 clock to 400kHz
- Salvator-X, Salvator-XS and ULCB boards
+ Add sdhi2_ds pin group to SDHI2 pinctrl groups

* R-Car H3 (r8a7795) SoC
- Describe CryptoCAL (CCREE) device

* R-Car M3-W (r8a7796) SoC
- Describe PCIe devices
- Describe HSCIF nodes

* R-Car M3-N (r8a77965) SoC
- Describe PCIe devices
- Use CPG MSSR symbols instead of numeric indicies

* R-Car D3 (r8a77995) SoC
- Describe Thermal device
- Describe MSIOF devices
- Add power domains to description of IPMMU devices
- Do not use deprecated renesas,gpio-rcar compat string
- Describe HDMI and CVBS input in DT of R-Car Gen3 D3 Draak board

* R-Car V3H (r8a77980) SoC
- Describe secondary CA53 CPU cores, and GPIO and
interconected FCPVD0, VSPD0, DU, and LVDS0 devices
- Enable ethernet on V3HSK board
- Specify Ethernet PHY IRQs in the DT of the Condor and V3HSK boards.
This is possible now that GPIO support is present.
Previously phylib had to resort to polling.
- Enable I2C0 on Condor board

* R-Car E3 (r8a77990)
- Enable Watchdog timer and USB2.0 host on Ebisu board
- Enable secondary CA53 CPU core

* tag 'renesas-arm64-dt-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (29 commits)
arm64: dts: renesas: r8a77995: Add MSIOF device nodes
arm64: dts: renesas: salvator-common: Add HSCIF1 device support
arm64: dts: renesas: r8a77980: add FCPVD/VSPD/DU/LVDS support
arm64: dts: renesas: condor/v3hsk: specify Ethernet PHY IRQs
arm64: dts: renesas: r8a77965: Add PCIe device nodes
arm64: dts: renesas: Fix VSPD registers range
arm64: dts: renesas: convert to SPDX identifiers
arm64: dts: renesas: r8a77980: add GPIO support
arm64: dts: renesas: r8a77990: Enable USB2.0 Host for Ebisu board
arm64: dts: renesas: r8a7796: Add PCIe device nodes
arm64: dts: renesas: r8a77990: Add secondary CA53 CPU core
arm64: dts: renesas: r8a77990: ebisu: Enable watchdog timer
arm64: dts: renesas: condor: add I2C0 support
arm64: dts: renesas: r8a77980: add I2C support
arm64: dts: renesas: salvator-x(s): Update I2C ch4 clock to 400kHz
arm64: dts: renesas: Add sdhi2_ds pin group to SDHI2 pinctrl groups
arm64: dts: renesas: r8a77965: Add all HSCIF nodes
arm64: dts: renesas: r8a77965: Use r8a77965-cpg-mssr binding definitions
arm64: dts: renesas: r8a7795: add ccree to device tree
arm64: dts: renesas: r8a77965: Add Watchdog Timer controller node using RCLK Watchdog Timer
...

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

arm64: dts: renesas: r8a77965: Add second port to rcar_sound placeholder

This node is just a placeholder but fills that function better if it does
not trigger build warnings. This update satisfies t

arm64: dts: renesas: r8a77965: Add second port to rcar_sound placeholder

This node is just a placeholder but fills that function better if it does
not trigger build warnings. This update satisfies the requirement that
nodes with #address-cells/#size-cells properties have more than one child
node.

This is flagged by dtc as follows:
# make dtbs W=1
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning (graph_child_address): /soc/sound@ec500000/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dtb: Warning (graph_child_address): /soc/sound@ec500000/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

Merge tag 'v4.18-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.18-rc2