Merge tag 'asoc-fix-v5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.1

A few core fixes along with the driver specific ones, mainly fixing

Merge tag 'asoc-fix-v5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.1

A few core fixes along with the driver specific ones, mainly fixing
small issues that only affect x86 platforms for various reasons (their
unusual machine enumeration mechanisms mainly, plus a fix for error
handling in topology).

There's some of the driver fixes that look larger than they are, like
the hdmi-codec changes which resulted in an indentation change, and most
of the other large changes are for new drivers like the STM32 changes.

show more ...

Merge drm/drm-next into drm-misc-next

Finally have a reason for a backmerge other than "it's been a while"!

Backmerging drm-next to -misc-next to facilitate Rob Herring's work on
Panfrost.

Signed-

Merge drm/drm-next into drm-misc-next

Finally have a reason for a backmerge other than "it's been a while"!

Backmerging drm-next to -misc-next to facilitate Rob Herring's work on
Panfrost.

Signed-off-by: Sean Paul <seanpaul@chromium.org>

show more ...

Merge tag 'v5.1-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 5.1-rc3

Sync with upstream (which now contains fbdev-v5.1 changes) to
prepare a base

Merge tag 'v5.1-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 5.1-rc3

Sync with upstream (which now contains fbdev-v5.1 changes) to
prepare a base for fbdev-v5.2 changes.

show more ...

Merge drm/drm-next into drm-intel-next-queued

This is needed to get the fourcc code merged without conflicts.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge tag 'v5.1-rc2' into next-general

Merge to Linux 5.1-rc2 for subsystems to work with.

Merge remote-tracking branch 'net/master'

Merge tag 'v5.1-rc1' into spi-5.2

Linux 5.1-rc1

Merge tag 'v5.1-rc1' into regulator-5.2

Linux 5.1-rc1

Merge tag 'v5.1-rc1' into asoc-5.2

Linux 5.1-rc1

Merge tag 'v5.1-rc1' into asoc-5.1

Linux 5.1-rc1

arm64: dts: renesas: cat875: Add CAN support

Add CAN support to the CAT875 sub board.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@

arm64: dts: renesas: cat875: Add CAN support

Add CAN support to the CAT875 sub board.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC device tree updates from Arnd Bergmann:
"This is a smaller update than the past few times, but with just

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC device tree updates from Arnd Bergmann:
"This is a smaller update than the past few times, but with just over
500 non-merge changesets still dwarfes the rest of the SoC tree.

Three new SoC platforms get added, each one a follow-up to an existing
product, and added here in combination with a reference platform:

- Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging
processor:

https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html

- Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics
Applications":

https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html

- NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC:

https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X

These are actual commercial products we now support with an in-kernel
device tree source file:

- Bosch Guardian is a product made by Bosch Power Tools GmbH, based
on the Texas Instruments AM335x chip

- Winterland IceBoard is a Texas Instruments AM3874 based machine
used in telescopes at the south pole and elsewhere, see commit
d031773169df2 for some pointers:

- Inspur on5263m5 is an x86 server platform with an Aspeed ast2500
baseboard management controller. This is for running on the BMC.

- Zodiac Digital Tapping Unit, apparently a kind of ethernet switch
used in airplanes.

- Phicomm K3 is a WiFi router based on Broadcom bcm47094

- Methode Electronics uDPU FTTdp distribution point unit

- X96 Max, a generic TV box based on Amlogic G12a (S905X2)

- NVIDIA Shield TV (Darcy) based on Tegra210

And then there are several new SBC, evaluation, development or modular
systems that we add:

- Three new Rockchips rk3399 based boards:
- FriendlyElec NanoPC-T4 and NanoPi M4
- Radxa ROCK Pi 4

- Five new i.MX6 family SoM modules and boards for industrial
products:
- Logic PD i.MX6QD SoM and evaluation baseboad
- Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL
- Phytec phyCORE i.MX6 UltraLite SoM and evaluation module

- MYIR Tech MYD-LPC4357 development based on the NXP lpc4357
microcontroller

- Chameleon96, an Intel/Altera Cyclone5 based FPGA development system
in 96boards form factor

- Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual
platform for corresponding to the latest "fast model"

- Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit
and 64-bit mode.

- Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards
enterprise form factor

- Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108

For already supported boards and SoCs, we often add support for new
devices after merging the drivers. This time, the largest changes
include updates for

- STMicroelectronics stm32mp1, which was now formally launched last
week

- Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip

- Action Semi S700

- TI AM654x, their recently merged 64-bit SoC from the OMAP family

- Various Amlogic Meson SoCs

- Mediatek MT2712

- NVIDIA Tegra186 and Tegra210

- The ancient NXP lpc32xx family

- Samsung s5pv210, used in some older mobile phones

Many other chips see smaller updates and bugfixes beyond that"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits)
ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4
dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
ARM: dts: am335x: switch to use phy-gmii-sel
ARM: dts: am4372: switch to use phy-gmii-sel
ARM: dts: dm814x: switch to use phy-gmii-sel
ARM: dts: dra7: switch to use phy-gmii-sel
arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference
ARM: dts: exynos: Add support for secondary DAI to Odroid XU4
ARM: dts: exynos: Add support for secondary DAI to Odroid XU3
ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite
ARM: dts: exynos: Add stdout path property to Arndale board
ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU
ARM: dts: exynos: Enable ADC on Odroid HC1
arm64: dts: sprd: Remove wildcard compatible string
arm64: dts: sprd: Add SC27XX fuel gauge device
arm64: dts: sprd: Add SC2731 charger device
arm64: dts: sprd: Add ADC calibration support
arm64: dts: sprd: Remove PMIC INTC irq trigger type
arm64: dts: rockchip: Enable tsadc device on rock960
ARM: dts: rockchip: add chosen node on veyron devices
...

show more ...

Merge tag 'renesas-arm64-dt2-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v5.1

* R-Car Gen3 SoC based

Merge tag 'renesas-arm64-dt2-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v5.1

* R-Car Gen3 SoC based Salvator-X, Salvator-XS and ULCB boards
- Enable HS400 support for eMMC

* R-Car E3 (r7a77990) SoC
- Add OPPs table for cpu devices

* RZ/G2E (r8a774c0) SoC
- Describe TMU, CMT, SDHI devices in DT
- Describe pincontrol support for SCIF2 device in DT
- Add OPPs table for cpu devices

* RZ/G2E (r8a774c0) based EK874 board and CAT875 sub-board,
and CAT874 board
- Initial support

* tag 'renesas-arm64-dt2-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: cat875: Enable PCIe support
arm64: dts: renesas: r8a774c0-cat874: Add pciec0 support
arm64: dts: renesas: r8a774c0: Add TMU device nodes
arm64: dts: renesas: r8a774c0: Add CMT device nodes
arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices
arm64: dts: renesas: r8a77990: Add OPPs table for cpu devices
arm64: dts: renesas: enable HS400 on R-Car Gen3
arm64: dts: renesas: cat875: Add ethernet support
arm64: dts: renesas: r8a774c0-cat874: Add uSD support
arm64: dts: renesas: r8a774c0-cat874: Add pincontrol support to scif2
arm64: dts: renesas: Add Si-Linux EK874 board support
arm64: dts: renesas: Add Si-Linux CAT874 board support

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm64: dts: renesas: cat875: Enable PCIe support

This patch enables PCIEC0 PCI express controller on the sub board.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven

arm64: dts: renesas: cat875: Enable PCIe support

This patch enables PCIEC0 PCI express controller on the sub board.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: cat875: Add ethernet support

This patch adds ethernet support to the sub board.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castr

arm64: dts: renesas: cat875: Add ethernet support

This patch adds ethernet support to the sub board.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: Add Si-Linux EK874 board support

The EK874 development kit from Silicon Linux is made of CAT874 (the main
board) and CAT875 (the sub board that goes on top of CAT874).

Signed-o

arm64: dts: renesas: Add Si-Linux EK874 board support

The EK874 development kit from Silicon Linux is made of CAT874 (the main
board) and CAT875 (the sub board that goes on top of CAT874).

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...