Merge branch 'elan-i2c' into next

Bring in update to Elan touchpad driver to support newer touchpads with
higher resolution.

Merge tag 'tegra-for-5.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v5.9-rc1

This contains a slew of fixes in preparati

Merge tag 'tegra-for-5.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v5.9-rc1

This contains a slew of fixes in preparation for validating device trees
against json-schema bindings. In addition, this enables the CPU complex
(for CPU frequency scaling) and GPU on Tegra194.

* tag 'tegra-for-5.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (56 commits)
arm64: tegra: Add the GPU on Tegra194
arm64: tegra: Add compatible string for Tegra194 CPU complex
arm64: tegra: Add HDMI supplies on Norrin
arm64: tegra: Add #{address,size}-cells for VI I2C on Tegra210
arm64: tegra: Add missing clocks and power-domains to Tegra210 VI I2C
arm64: tegra: Add clocks and resets for ISP on Tegra210
arm64: tegra: Fix compatible string for DPAUX on Tegra210
arm64: tegra: Add i2c-bus subnode for DPAUX controllers
arm64: tegra: Sort aliases alphabetically
arm64: tegra: Remove spurious tabs
arm64: tegra: Populate VBUS for USB3 on Jetson TX2
arm64: tegra: Enable DFLL support on Jetson Nano
arm64: tegra: Add support for Jetson Xavier NX
arm64: tegra: Re-order PCIe aperture mappings
arm64: tegra: Enable Tegra VI CSI support for Jetson Nano
arm64: tegra: jetson-tx1: Add camera supplies
arm64: tegra: Fix order of XUSB controller clocks
arm64: tegra: Rename cbb@0 to bus@0 on Tegra194
arm64: tegra: Sort nodes by unit-address on Jetson Nano
arm64: tegra: Various fixes for PMICs
...

Link: https://lore.kernel.org/r/20200717161300.1661002-7-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm64: tegra: Sort aliases alphabetically

Most device tree files already do this, so update the remaining ones
for consistency.

Signed-off-by: Thierry Reding <treding@nvidia.com>

arm64: tegra: Use standard EEPROM properties

The address-bits and page-size properties that are currently used are
not valid properties according to the bindings. Use the address-width
and pagesize

arm64: tegra: Use standard EEPROM properties

The address-bits and page-size properties that are currently used are
not valid properties according to the bindings. Use the address-width
and pagesize properties instead.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Remove simple regulators bus

The standard way to do this is to list out the regulators at the top-
level. Adopt the standard way to fix validation.

Signed-off-by: Thierry Reding <tred

arm64: tegra: Remove simple regulators bus

The standard way to do this is to list out the regulators at the top-
level. Adopt the standard way to fix validation.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Fix atomicity of affinity update in the G

Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Fix atomicity of affinity update in the GIC driver
- Don't sleep in atomic when waiting for a GICv4.1 RD to respond
- Fix a couple of typos in user-visible messages

show more ...

Merge tag 'v5.8-rc3' into arm/qcom

Linux 5.8-rc3

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.

Signed-off-by: Maarten Lankhorst <maarten.la

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking
API: convert mmap_sem comments").

Signed-off-by: Jani Nikula <jani.nikula@inte

Merge drm/drm-next into drm-intel-next-queued

Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking
API: convert mmap_sem comments").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

arm64: tegra: Rename sdhci nodes to mmc

The new json-schema based validation tools require SD/MMC controller
nodes to be named mmc. Rename all references to them.

Signed-off-by: Thierry Reding <tre

arm64: tegra: Rename sdhci nodes to mmc

The new json-schema based validation tools require SD/MMC controller
nodes to be named mmc. Rename all references to them.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Add unit-address to memory node

The memory node requires a unit-address. For some boards the bootloader,
which is usually locked down, uses a hard-coded name for the memory node
withou

arm64: tegra: Add unit-address to memory node

The memory node requires a unit-address. For some boards the bootloader,
which is usually locked down, uses a hard-coded name for the memory node
without a unit-address, so we can't fix it on those boards.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Add missing #phy-cells property on Jetson TX2

PHYs need to have a #phy-cells property that defines how many cells are
required in their specifier. The standard Ethernet PHY doesn't req

arm64: tegra: Add missing #phy-cells property on Jetson TX2

PHYs need to have a #phy-cells property that defines how many cells are
required in their specifier. The standard Ethernet PHY doesn't require
a specifier, so set its #phy-cells to 0.

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

Merge tag 'v5.8-rc1' into regulator-5.8

Linux 5.8-rc1

Merge tag 'v5.8-rc1' into fixes

Linux 5.8-rc1

Merge v5.8-rc1 into drm-misc-fixes

Beginning a new release cycles for what will become v5.8. Updating
drm-misc-fixes accordingly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'dt/schema-cleanups' into dt/linus

Merge branch 'x86/entry' into ras/core

to fixup conflicts in arch/x86/kernel/cpu/mce/core.c so MCE specific follow
up patches can be applied without creating a horrible merge conflict
afterwards.

Merge branch 'next' into for-linus

Prepare input updates for 5.8 merge window.

Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
"This is the set of device tree changes, mostly covering new hardware

Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
"This is the set of device tree changes, mostly covering new hardware
support, with 577 patches touching a little over 500 files.

There are five new Arm SoCs supported in this release, all of them for
existing SoC families:

- Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS
devices and Android Set-top-box designs, along with the
"Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the
Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4
single-board computer.

- Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and
the iW-RainboW-G21D-Qseven-RZG1H board/SoM

- Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO
Advance game console

Newly added machines on already supported SoCs are:

- AMLogic S905D based Smartlabs SML-5442TW TV box

- AMLogic S905X3 based ODROID-C4 SBC

- AMLogic S922XH based Beelink GT-King Pro TV box

- Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC

- Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO
OpenPower P9 "Nicole"

- Marvell Kirkwood based Check Point L-50 router

- Mediatek MT8173 based Elm/Hana Chromebook laptops

- Microchip SAMA5D2 "Industrial Connectivity Platform" reference
board

- NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit

- Octavo OSDMP15x based Linux Automation MC-1 development board

- Qualcomm SDM630 based Xiaomi Redmi Note 7 phone

- Realtek RTD1295 based Xnano X5 TV Box

- STMicroelectronics STM32MP1 based Stinger96 single-board computer
and IoT Box

- Samsung Exynos4210 based based Samsung Galaxy S2 phone

- Socionext Uniphier based Akebi96 SBC

- TI Keystone based K2G Evaluation board

- TI am5729 based Beaglebone-AI development board

Include device descriptions for additional hardware support in
existing SoCs and machines based on all major SoC platforms:

- AMlogic Meson

- Allwinner sunxi

- Arm Juno/VFP/Vexpress/Integrator

- Broadcom bcm283x/bcm2711

- Hisilicon hi6220

- Marvell EBU

- Mediatek MT27xx, MT76xx, MT81xx and MT67xx

- Microchip SAMA5D2

- NXP i.MX6/i.MX7/i.MX8 and Layerscape

- Nvidia Tegra

- Qualcomm Snapdragon

- Renesas r8a77961, r8a7791

- Rockchips RK32xx/RK33xx

- ST-Ericsson ux500

- STMicroelectronics SMT32

- Samsung Exynos and S5PV210

- Socionext Uniphier

- TI OMAP5/DRA7 and Keystone"

* tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits)
ARM: dts: keystone: Rename "msmram" node to "sram"
arm: dts: mt2712: add uart APDMA to device tree
arm64: dts: mt8183: add mmc node
arm64: dts: mt2712: add ethernet device node
arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1
ARM: dts: mmp3: Add the fifth SD HCI
ARM: dts: berlin*: Fix up the SDHCI node names
ARM: dts: mmp3: Fix USB & USB PHY node names
ARM: dts: mmp3: Fix L2 cache controller node name
ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property
ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property
ARM: dts: pxa910: Fix the gpio interrupt cell number
ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property
ARM: dts: pxa168: Fix the gpio interrupt cell number
ARM: dts: pxa168: Add missing address/size cells to i2c nodes
ARM: dts: dove: Fix interrupt controller node name
ARM: dts: kirkwood: Fix interrupt controller node name
arm64: dts: Add SC9863A emmc and sd card nodes
arm64: dts: Add SC9863A clock nodes
arm64: dts: mt6358: add PMIC MT6358 related nodes
...

show more ...

Merge branches 'for-5.7/upstream-fixes', 'for-5.8/apple', 'for-5.8/asus', 'for-5.8/core', 'for-5.8/intel-ish', 'for-5.8/logitech', 'for-5.8/mcp2221' and 'for-5.8/multitouch' into for-linus

Merge branch 'for-5.8' into for-linus

Merge tag 'tegra-for-5.8-arm64-dt-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v5.8-rc1

This contains a couple of fixes for min

Merge tag 'tegra-for-5.8-arm64-dt-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v5.8-rc1

This contains a couple of fixes for minor issues, enables XUDC support
on Tegra194, and enables EMC frequency scaling and video capture on
Tegra210.

* tag 'tegra-for-5.8-arm64-dt-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1
arm64: tegra: Make the RTC a wakeup source on Jetson TX2
arm64: tegra: Enable VI I2C on Jetson Nano
arm64: tegra: Fix flag for 64-bit resources in 'ranges' property
arm64: tegra: Add Tegra VI CSI support in device tree
arm64: tegra: Add reset-cells to memory controller
arm64: tegra: Fix SOR powergate clocks and reset
arm64: tegra: Allow the PMIC RTC to wakeup Jetson Xavier
arm64: tegra: Fix ethernet phy-mode for Jetson Xavier
arm64: tegra: Hook up EMC cooling device
arm64: tegra: Add external memory controller node for Tegra210
arm64: tegra: Add XUDC node on Tegra194
arm64: tegra: Kill off "simple-panel" compatibles

Link: https://lore.kernel.org/r/20200522142846.2376224-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge branch 'timers/drivers/timer-ti' into timers/drivers/next

arm64: tegra: Make the RTC a wakeup source on Jetson TX2

The RTC found on the MAX77620 PMIC can be used as a wakeup source on
Jetson TX2, which is useful to wake the system from suspend at a given
t

arm64: tegra: Make the RTC a wakeup source on Jetson TX2

The RTC found on the MAX77620 PMIC can be used as a wakeup source on
Jetson TX2, which is useful to wake the system from suspend at a given
time.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>

show more ...

Merge branch 'kvm-amd-fixes' into HEAD