Merge tag 'v5.1-rc1' into asoc-5.2

Linux 5.1-rc1

Merge tag 'v5.1-rc1' into asoc-5.1

Linux 5.1-rc1

ARM: dts: sun8i-h3: Add support for the RerVision H3-DVK board

This is an H3-based board that sticks close to the reference design.

Supported features:
* UART
* DRAM
* MMC
* eMMC
* Ethernet
* USB h

ARM: dts: sun8i-h3: Add support for the RerVision H3-DVK board

This is an H3-based board that sticks close to the reference design.

Supported features:
* UART
* DRAM
* MMC
* eMMC
* Ethernet
* USB host
* USB peripheral
* HDMI

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

show more ...

Merge tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM new SoC family support from Arnd Bergmann:
"Two new SoC families are added this time.

Sugaya Taichi su

Merge tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM new SoC family support from Arnd Bergmann:
"Two new SoC families are added this time.

Sugaya Taichi submitted support for the Milbeaut SoC family from
Socionext and explains:

"SC2000 is a SoC of the Milbeaut series. equipped with a DSP
optimized for computer vision. It also features advanced
functionalities such as 360-degree, real-time spherical stitching
with multi cameras, image stabilization for without mechanical
gimbals, and rolling shutter correction. More detail is below:

https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"

Interestingly, this one has a history dating back to older chips made
by Socionext and previously Matsushita/Panasonic based on their own
mn10300 CPU architecture that was removed from the kernel last year.

Manivannan Sadhasivam adds support for another SoC family, this is the
Bitmain BM1880 chip used in the Sophon Edge TPU developer board.

The chip is intended for Deep Learning applications, and comes with
dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
microcontroller core to control the tensor unit. For the moment, the
TPU is not accessible in mainline Linux, so we treat it as a generic
Arm SoC.

More information is available at

https://www.sophon.ai/"

* tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V
ARM: configs: Add Milbeaut M10V defconfig
ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs
dt-bindings: timer: Add Milbeaut M10V timer description
ARM: milbeaut: Add basic support for Milbeaut m10v SoC
dt-bindings: Add documentation for Milbeaut SoCs
dt-bindings: arm: Add SMP enable-method for Milbeaut
dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram
MAINTAINERS: Add entry for Bitmain SoC platform
arm64: dts: bitmain: Add Sophon Egde board support
arm64: dts: bitmain: Add BM1880 SoC support
arm64: Add ARCH_BITMAIN platform
dt-bindings: arm: Document Bitmain BM1880 SoC

show more ...

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC device tree updates from Arnd Bergmann:
"This is a smaller update than the past few times, but with just

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC device tree updates from Arnd Bergmann:
"This is a smaller update than the past few times, but with just over
500 non-merge changesets still dwarfes the rest of the SoC tree.

Three new SoC platforms get added, each one a follow-up to an existing
product, and added here in combination with a reference platform:

- Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging
processor:

https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html

- Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics
Applications":

https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html

- NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC:

https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X

These are actual commercial products we now support with an in-kernel
device tree source file:

- Bosch Guardian is a product made by Bosch Power Tools GmbH, based
on the Texas Instruments AM335x chip

- Winterland IceBoard is a Texas Instruments AM3874 based machine
used in telescopes at the south pole and elsewhere, see commit
d031773169df2 for some pointers:

- Inspur on5263m5 is an x86 server platform with an Aspeed ast2500
baseboard management controller. This is for running on the BMC.

- Zodiac Digital Tapping Unit, apparently a kind of ethernet switch
used in airplanes.

- Phicomm K3 is a WiFi router based on Broadcom bcm47094

- Methode Electronics uDPU FTTdp distribution point unit

- X96 Max, a generic TV box based on Amlogic G12a (S905X2)

- NVIDIA Shield TV (Darcy) based on Tegra210

And then there are several new SBC, evaluation, development or modular
systems that we add:

- Three new Rockchips rk3399 based boards:
- FriendlyElec NanoPC-T4 and NanoPi M4
- Radxa ROCK Pi 4

- Five new i.MX6 family SoM modules and boards for industrial
products:
- Logic PD i.MX6QD SoM and evaluation baseboad
- Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL
- Phytec phyCORE i.MX6 UltraLite SoM and evaluation module

- MYIR Tech MYD-LPC4357 development based on the NXP lpc4357
microcontroller

- Chameleon96, an Intel/Altera Cyclone5 based FPGA development system
in 96boards form factor

- Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual
platform for corresponding to the latest "fast model"

- Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit
and 64-bit mode.

- Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards
enterprise form factor

- Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108

For already supported boards and SoCs, we often add support for new
devices after merging the drivers. This time, the largest changes
include updates for

- STMicroelectronics stm32mp1, which was now formally launched last
week

- Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip

- Action Semi S700

- TI AM654x, their recently merged 64-bit SoC from the OMAP family

- Various Amlogic Meson SoCs

- Mediatek MT2712

- NVIDIA Tegra186 and Tegra210

- The ancient NXP lpc32xx family

- Samsung s5pv210, used in some older mobile phones

Many other chips see smaller updates and bugfixes beyond that"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits)
ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4
dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
ARM: dts: am335x: switch to use phy-gmii-sel
ARM: dts: am4372: switch to use phy-gmii-sel
ARM: dts: dm814x: switch to use phy-gmii-sel
ARM: dts: dra7: switch to use phy-gmii-sel
arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference
ARM: dts: exynos: Add support for secondary DAI to Odroid XU4
ARM: dts: exynos: Add support for secondary DAI to Odroid XU3
ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite
ARM: dts: exynos: Add stdout path property to Arndale board
ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU
ARM: dts: exynos: Enable ADC on Odroid HC1
arm64: dts: sprd: Remove wildcard compatible string
arm64: dts: sprd: Add SC27XX fuel gauge device
arm64: dts: sprd: Add SC2731 charger device
arm64: dts: sprd: Add ADC calibration support
arm64: dts: sprd: Remove PMIC INTC irq trigger type
arm64: dts: rockchip: Enable tsadc device on rock960
ARM: dts: rockchip: add chosen node on veyron devices
...

show more ...

Merge branch 'milbeaut/newsoc' into arm/newsoc

Sugaya Taichi <sugaya.taichi@socionext.com> explains:

Here is the series of patches the initial support for SC2000(M10V) of
Milbeaut SoCs. "M10V" is t

Merge branch 'milbeaut/newsoc' into arm/newsoc

Sugaya Taichi <sugaya.taichi@socionext.com> explains:

Here is the series of patches the initial support for SC2000(M10V) of
Milbeaut SoCs. "M10V" is the internal name of SC2000, so commonly used in
source code.

SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for
computer vision. It also features advanced functionalities such as 360-degree,
real-time spherical stitching with multi cameras, image stabilization for
without mechanical gimbals, and rolling shutter correction. More detail is
below:
https://www.socionext.com/en/products/assp/milbeaut/SC2000.html

Specifications for developers are below:
- Quad-core 32bit Cortex-A7 on ARMv7-A architecture
- NEON support
- DSP
- GPU
- MAX 3GB DDR3
- Cortex-M0 for power control
- NAND Flash Interface
- SD UHS-I
- SD UHS-II
- SDIO
- USB2.0 HOST / Device
- USB3.0 HOST / Device
- PCI express Gen2
- Ethernet Engine
- I2C
- UART
- SPI
- PWM

Support is quite minimal for now, since it only includes timer, clock,
pictrl and serial controller drivers, so we can only boot to userspace
through initramfs. Support for the other peripherals will come eventually.

* milbeaut/newsoc:
ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V
ARM: configs: Add Milbeaut M10V defconfig
ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs
dt-bindings: timer: Add Milbeaut M10V timer description
ARM: milbeaut: Add basic support for Milbeaut m10v SoC
dt-bindings: Add documentation for Milbeaut SoCs
dt-bindings: arm: Add SMP enable-method for Milbeaut
dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram

Link: https://lore.kernel.org/linux-arm-kernel/1551243056-10521-1-git-send-email-sugaya.taichi@socionext.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board

Add devicetree for Milbeaut M10V SoC and M10V Evaluation board.

Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed

ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board

Add devicetree for Milbeaut M10V SoC and M10V Evaluation board.

Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'omap-for-v5.1/cpsw-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late

One change to deprecate old CPSW Ethernet PHY mode selection driver

With the d

Merge tag 'omap-for-v5.1/cpsw-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late

One change to deprecate old CPSW Ethernet PHY mode selection driver

With the device tree changes configuring CPSW with a proper PHY driver,
we want to deprecate the old driver to avoid new users for it.

Note that this driver is based on the related dts changes.

* tag 'omap-for-v5.1/cpsw-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'omap-for-v5.1/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

More dts changes for omaps

We add support for Bosch Guardian am335x device, an

Merge tag 'omap-for-v5.1/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

More dts changes for omaps

We add support for Bosch Guardian am335x device, and configure more
devices like GNSS and LCD backlight for omap3-gta04. And we replace
the wlcore binding documentation URL with a local file that we have.

* tag 'omap-for-v5.1/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap3-gta04: declare backlight in lcd node
ARM: dts: am335x: Add support for Bosch Guardian
ARM: dts: gta04: add gps support
ARM: dts: gta04: add ldo 3v3 regulator
ARM: dts: gta04: add pinctrl settings for wkup domain
ARM: dts: omap3-gta04a5: Replace LXR reference with a local one

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'imx-dt-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX device tree changes for 5.1:
- New board support: Logic PD i.MX6QD EVM, ZII SSMB DTU, Phytec

Merge tag 'imx-dt-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX device tree changes for 5.1:
- New board support: Logic PD i.MX6QD EVM, ZII SSMB DTU, Phytec
phyBOARD i.MX6UL Segin, Y Soft IOTA Draco, Hydra and Ursa boards.
- Add regulator control for various sensors on imx6qdl-sabresd board.
- Add DISPLAY power domain support for i.MX6SX SoC.
- Add stmpe-adc device node for Toradex iMX6 module.
- Switch to SPDX identifier for imx6q-tbs2910 board.
- Add proper ksz9031 clock skew values for imx6qdl-phytec-pfla02 board.
- Mark I2C recovery GPIOs as open drain and correct and WEIM range
configuration for apalis/colibri boards.
- Small and random updates to various devices.

* tag 'imx-dt-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (31 commits)
ARM: dts: imx: Add support for Logic PD i.MX6QD EVM
ARM: dts: imx6qdl-sabresd: remove reg_sensors' regulator-always-on
ARM: dts: imx6qdl-sabresd: add regulators control for mma8451 sensor
ARM: dts: imx6qdl-sabresd: add regulators control for mag3110 sensor
ARM: dts: imx6qdl-sabresd: add regulator control for isl29023 sensor
ARM: dts: vf610: Add ZII SSMB DTU board
ARM: dts: pfla02: add ksz9031 clock skew values
ARM: dts: imx6qdl-phytec-pfla02: add missing interrupt-controller property
ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modules
ARM: dts: Add devicetree compatibles for LS1021A based boards
ARM: dts: colibri: use valid range configuration for weim
ARM: dts: imx6: Add support for Phytec phyBOARD i.MX6UL Segin
ARM: dts: imx6*-apalis/-colibri: mark I2C recovery GPIOs as open drain
ARM: dts: vf610-zii-ssmb-spu3: Pass "no-sdio"/"no-sd" properties
ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards
ARM: dts: imx7ulp: add sim node
ARM: dts: imx6ull: change to use new compatible "fsl,imx6ull-usdhc" for usdhc
ARM: dts: imx6ull: Fix i.MX6ULL/ULZ ocotp compatible
ARM: dts: imx6sx: Add DISPLAY power domain support
ARM: dts: i.MX51: digi-connectcore-som: Add support for I2C bus recovery
...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'renesas-arm-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM Based SoC DT Updates for v5.1

* R-Car H2 (r8a7790) based Stout board
- C

Merge tag 'renesas-arm-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM Based SoC DT Updates for v5.1

* R-Car H2 (r8a7790) based Stout board
- Convert to new LVDS DT bindings

* R-Car H1 (r8a7779) and M1A (r8a7778) SoCs
- Describe HSCIF0/1 devices in DT

* RZ/G1M (r8a7743) SoC
- Correct sort order of the RWDT node
- Remove aliases: should be defined in board rather than SoC DT if needed
- Remove generic compatible string from iic3: it is not compatible

* RZ/G1N (r8a7744) SoC
- Describe LVDS and DU devices in DT
- Correct sort order of VSP and MSIOF noces

* RZ/G1C (r8a7747) based iWave SBC
- Enable RTC

* RZ/A2M (r7s9210) SoC and EVB
- Initial support

* tag 'renesas-arm-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: r8a7744: Add LVDS support
ARM: dts: r8a7744: Add DU support
ARM: dts: r7s9210-rza2mevb: Add support for RZ/A2M EVB
ARM: dts: r7s9210: Initial SoC device tree
ARM: dts: r8a7779: Add HSCIF0/1 device nodes
ARM: dts: r8a7778: Add HSCIF0/1 support
ARM: dts: r8a7743: Fix sorting of rwdt node
ARM: dts: r8a7743: Remove aliases from SoC dtsi
ARM: dts: r8a7743: Remove generic compatible string from iic3
ARM: dts: r8a7744: Fix sorting of vsp and msiof nodes
ARM: dts: iwg23s-sbc: Enable RTC
ARM: dts: stout: Convert to new LVDS DT bindings

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.1
- Add SMMU node for Stratix10
- Add vendor prefix fo Novtech

Merge tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.1
- Add SMMU node for Stratix10
- Add vendor prefix fo Novtech
- Add a new 96Boards Chameleon96 board that uses a Cyclone5 SoCFPGA
- Add missing reset properties for all IP on Cyclone5 and Arria10

* tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: update more missing reset properties
ARM: dts: socfpga: update missing reset property peripherals
ARM: dts: Add support for 96Boards Chameleon96 board
dt-bindings: vendor-prefixes: Add Novtech Vendor Prefix
arm64: dts: stratix10: Add Stratix10 SMMU support

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'lpc32xx-dt-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx into arm/dt

ARM: lpc32xx: devicetree updates for v5.1

Here are the changes for ARM NXP LPC32xx and ARM NXP LPC18xx/LPC4

Merge tag 'lpc32xx-dt-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx into arm/dt

ARM: lpc32xx: devicetree updates for v5.1

Here are the changes for ARM NXP LPC32xx and ARM NXP LPC18xx/LPC43xx
devicetree files:

* added dts file for MYIR Tech MYD-LPC4357 development board,
* two missing properties are added to LPC32xx keypad controller device
tree node, this fixes a long-standing problem with its initialization,
* LPC32xx PL11x LCD controller device node got corrected properties,
which allows to use it with a new PL11x DRM driver,
* output voltage level on one of Phytec phyCORE-LPC3250 fixed regulators
is corrected, the fix is needed to remove duplicating platform data,
* Phytec phyCORE-LPC3250 board gets a description of a kit LCD panel,
this completes setup of CLCD device tree node for the board,
* added unit addresses to memory device nodes on EA and Phytec boards,
* fixes of ordinary warnings in dts formatting like leading zeroes,
unused address and size cell properties and so on.

* tag 'lpc32xx-dt-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx:
ARM: dts: lpc32xx: ea3250: beautify gpio keys children nodes
ARM: dts: lpc32xx: ea3250: add unit address to memory device node
ARM: dts: lpc32xx: phy3250: add unit address to memory device node
ARM: dts: lpc32xx: phy3250: setup LCD controller to panel interface
ARM: dts: lpc32xx: phy3250: remove regulators umbrella device node
ARM: dts: lpc32xx: phy3250: fix SD card regulator voltage
ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller clocks property
ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller variant
ARM: dts: lpc32xx: reparent keypad controller to SIC1
ARM: dts: lpc32xx: add required clocks property to keypad device node
ARM: dts: Add DT for MYIR Tech MYD-LPC4357 Development Board
ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notation
ARM: dts: lpc435x: remove address and size cells from gpio-keys-polled nodes

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'arm-soc/for-5.1/devicetree' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.1, please pull the following:

Merge tag 'arm-soc/for-5.1/devicetree' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.1, please pull the following:

- Dan relicenses the Luxul DTS files to GPL 2.0+/MIT

- Hao adds support for the Phicomm K3 which is a BCM4709 SoC with dual
BCM4366 radio

- Stefan adds support for the Raspberry Pi A+: binding and DTS files. He
also provides a bunch of DTC warning fixes for the different RPi DTS(i)
files and adds support for missing GPIO lines on RPi 2/3

* tag 'arm-soc/for-5.1/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2835-rpi-zero-w: Drop unnecessary pinctrl
ARM: dts: bcm283x: Add missing GPIO line names
ARM: dts: bcm2837-rpi-3-b-plus: Clarify label for STATUS_LED
ARM: dts: bcm2837-rpi-3-b: Use consistent label for HDMI hotplug
ARM: dts: bcm2835: Fix labels for GPIO 0,1
ARM: dts: bcm2835-rpi: Drop unnecessary #address-cells/#size-cells
ARM: dts: bcm283x: Fix DTC warning for memory node
ARM: dts: add Raspberry Pi 3 A+
dt-bindings: bcm: Add Raspberry Pi 3 A+
ARM: dts: BCM5301X: Add basic DT for Phicomm K3
ARM: dts: BCM53573: Relicense Luxul files to the GPL 2.0+ / MIT

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'v5.1-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

New board the Elgin-R1 based on the rv1108 soc and a number of small
improvements

Merge tag 'v5.1-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

New board the Elgin-R1 based on the rv1108 soc and a number of small
improvements for rv1108 as well. RK3066 got support for the core
display components and the Edison tablet got its touchscreen added.
Apart from that a wider fix to drop display-wp usage from places where
it shouldn't be used, a pin fix for Edison and a cleanup to prevent
rk3036 board from defining sound-dai-cells for core components in
each board separately.

* tag 'v5.1-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: clean up the abuse of disable-wp
ARM: dts: rv1108: Add support for rv1108-elgin-r1 board
dt-bindings: Add vendor prefix for elgin
ARM: dts: rockchip: rv1108: Add spim0 and spim1 pinctrl groups
ARM: dts: rockchip: Add missing dma-names SPI support for rv1108
ARM: dts: rockchip: add rk3066 vop display nodes
ARM: dts: rockchip: add focaltech touchscreen to rk3188-bqedison2qc
ARM: dts: rockchip: fix cif1_pdn pin on rk3188-bqedison2qc
ARM: dts: rockchip: add HCLK_HDMI to rk3066 vio power-domain
ARM: dts: rockchip: move rk3036 i2s sound-dail-cells into soc dtsi

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'omap-for-v5.1/dt-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

dts updates for ti81xx for v5.1 merge window

Two changes to add support fo

Merge tag 'omap-for-v5.1/dt-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

dts updates for ti81xx for v5.1 merge window

Two changes to add support for McGill University's IceBoard telescope
ARM + FPGA instrumentation board. This board is used for several
telescopes around the world, see the related device tree commit for
some interesting links for more information.

Note that these changes are based on the related ti81xx soc changes.

* tag 'omap-for-v5.1/dt-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Adds device tree file for McGill's IceBoard, based on TI AM3874
ARM: dts: ti81xx: Add dts boilerplate for all GPIO and SPI peripherals

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: dts: am335x: Add support for Bosch Guardian

The Bosch Guardian is a TI am335x based device.

It's hardware specifications are as follows:

* 256 MB DDR3 memory
* 512 MB NAND Flash
* USB OTG

ARM: dts: am335x: Add support for Bosch Guardian

The Bosch Guardian is a TI am335x based device.

It's hardware specifications are as follows:

* 256 MB DDR3 memory
* 512 MB NAND Flash
* USB OTG
* RS232
* MicroSD external storage
* LCD Display interface

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
[tony@atomide.com: updated to use #include]
Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

ARM: dts: vf610: Add ZII SSMB DTU board

Add the Zodiac Digital Tapping Unit, a VF610 based network device with
5 Ethernet ports. One of these ports supports 1000Base-T2.

Signed-off-by: Andrew Lunn

ARM: dts: vf610: Add ZII SSMB DTU board

Add the Zodiac Digital Tapping Unit, a VF610 based network device with
5 Ethernet ports. One of these ports supports 1000Base-T2.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: imx6: Add support for Phytec phyBOARD i.MX6UL Segin

The Phytec phyBOARD Segin is i.MX6 based SBC, available with either an
i.MX6UL or i.MX6ULL SOM and various add-on boards.

The following

ARM: dts: imx6: Add support for Phytec phyBOARD i.MX6UL Segin

The Phytec phyBOARD Segin is i.MX6 based SBC, available with either an
i.MX6UL or i.MX6ULL SOM and various add-on boards.

The following adds support for the "Full Featured" version of the Segin,
which is provided with the i.MX6UL SOM and the PEB-EVAL-01 evaluation
module.

Its hardware specifications are:

* 512MB DDR3 memory
* 512MB NAND flash
* Dual 10/100 Ethernet
* USB Host and USB OTG
* RS232
* MicroSD external storage
* Audio, RS232, I2C, SPI, CAN headers
* Further I/O options via A/V and Expansion headers

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards

These are i.MX6S/DL based SBCs embedded in various Y Soft products.
All share the same board design but have slightly different HW
configu

ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards

These are i.MX6S/DL based SBCs embedded in various Y Soft products.
All share the same board design but have slightly different HW
configuration.

Ursa
- i.MX6S SoC, 512MB RAM DDR3, 4GB eMMC, microSD
- parallel WVGA 7" LCD with touch panel
- 1x Eth (QCA8334 switch)
- USB OTG
- USB host (micro-B)

Draco
- i.MX6S SoC, 512MB RAM DDR3, 4GB eMMC, microSD
- parallel WVGA 7" LCD with touch panel
- 2x Eth (QCA8334 switch)
- USB OTG
- USB host (micro-B)
- RGB LED (I2C LP5562)
- 3.5mm audio jack + codec (LM49350)

Hydra
- i.MX6DL SoC, 2GB RAM DDR3, 4GB eMMC, microSD
- I2C OLED display, capacitive matrix keys
- 2x Eth (QCA8334 switch)
- USB OTG
- RGB LED (I2C LP5562)
- 3.5mm audio jack + codec (LM49350)
- HDMI
- miniPCIe slot

Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

Merge tag 'v5.0-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 5.0-rc5

Sync with upstream (which now contains fbdev-v5.0-rc3 changes) to
prepare a

Merge tag 'v5.0-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 5.0-rc5

Sync with upstream (which now contains fbdev-v5.0-rc3 changes) to
prepare a base for fbdev-v5.1 changes.

show more ...

ARM: dts: Add DT for MYIR Tech MYD-LPC4357 Development Board

Add support for MYIR Tech MYD-LPC4357 Development Board and
MY-LCD70TP-C 7" TFT LCD module with Innolux AT070TN82 panel.

The board conta

ARM: dts: Add DT for MYIR Tech MYD-LPC4357 Development Board

Add support for MYIR Tech MYD-LPC4357 Development Board and
MY-LCD70TP-C 7" TFT LCD module with Innolux AT070TN82 panel.

The board contains quite rich periferals, the list features
NXP LPC4357 SoC, 32 MB SDRAM, 4 MB SPI Flash, audio input/output
interface, LCD panel, micro SD card slot, USB, USB OTG, Ethernet,
2 CAN ports, 4 UARTs, I2C and SPI interfaces routed to external
interface.

More information can be found on http://www.myirtech.com/list.asp?id=422

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

show more ...

Merge tag 'tags/bcm2835-dt-64-next-2019-02-01' into devicetree-arm64/next

This pull request brings in the arm64 reference for Raspberry Pi 3 A+.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.co

Merge tag 'tags/bcm2835-dt-64-next-2019-02-01' into devicetree-arm64/next

This pull request brings in the arm64 reference for Raspberry Pi 3 A+.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

ARM: dts: add Raspberry Pi 3 A+

The Raspberry Pi 3 A+ is similar to the Pi 3 B+ but has only 512 MB RAM,
1 USB 2.0 port and no Ethernet.

Compared to the Raspberry Pi 3 B it isn't possible to contro

ARM: dts: add Raspberry Pi 3 A+

The Raspberry Pi 3 A+ is similar to the Pi 3 B+ but has only 512 MB RAM,
1 USB 2.0 port and no Ethernet.

Compared to the Raspberry Pi 3 B it isn't possible to control BT_ON and
WL_ON separately.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Eric Anholt <eric@anholt.net>

show more ...

Merge tag 'tags/bcm2835-dt-next-2019-02-01' into devicetree/next

This pull request adds support for the new Raspberry Pi 3 A+ and
the missing GPIO labels for RPi 2/3. Additionally it contains
some m

Merge tag 'tags/bcm2835-dt-next-2019-02-01' into devicetree/next

This pull request adds support for the new Raspberry Pi 3 A+ and
the missing GPIO labels for RPi 2/3. Additionally it contains
some minor DT fixes.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...