#
f97c81dc |
| 21-Sep-2019 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC late updates from Arnd Bergmann: "This is some material that we picked up into our tree late or that ha
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC late updates from Arnd Bergmann: "This is some material that we picked up into our tree late or that had complex inter-depondencies. The fact that there are these interdependencies tends to meant that these are often actually the most interesting new additions:
- The new Aspeed AST2600 baseboard management controller is added, this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and had some dependencies on other device drivers.
- After many years, support for the MMP2 based OLPC XO-1.75 finally makes it into the kernel.
- The Armada 3720 based Turris Mox open source router platform is a late addition and it follows some preparatory work across multiple branches.
- The OMAP2+ platform had some large-scale cleanup involving driver changes and DT changes, here we finish it off, dropping a lot of the now-unused platform data.
- The TI K3 platform that got added for 5.3 gains a lot more support for individual bits on the SoC, this part just came late for the merge window"
[ This pull request itself wasn't actually sent late at all by Arnd, but I waited on the branches that it used to be pulled first, so it ends up being merged much later than the other ARM SoC pull requests this merge window - Linus ]
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) ARM: dts: dir685: Drop spi-cpol from the display ARM: dts: aspeed: Add AST2600 pinmux nodes ARM: dts: aspeed: Add AST2600 and EVB ARM: exynos: Enable support for ARM architected timers ARM: samsung: Fix system restart on S3C6410 ARM: dts: mmp2: add OLPC XO 1.75 machine ARM: dts: mmp2: rename the USB PHY node ARM: dts: mmp2: specify reg-shift for the UARTs ARM: dts: mmp2: add camera interfaces ARM: dts: mmp2: fix the SPI nodes ARM: dts: mmp2: trivial whitespace fix arm64: dts: marvell: add DTS for Turris Mox dt-bindings: marvell: document Turris Mox compatible arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address arm64: dts: ti: k3-j721e-main: Add hwspinlock node arm64: dts: ti: k3-am65-main: Add hwspinlock node arm64: dts: k3-j721e: Add gpio-keys on common processor board dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E ...
show more ...
|
#
cef72982 |
| 17-Sep-2019 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann: "This is another huge branch with close to 450 changessets related to device
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann: "This is another huge branch with close to 450 changessets related to devicetree files, roughly half of this for 32-bit and 64-bit respectively. There are lots of cleanups and additional hardware support for platforms we already support based on SoCs from Renesas, ST-Microelectronics, Intel/Altera, Rockchips, Allwinner, Broadcom and other manufacturers.
A total of 6 new SoCs and 37 new boards gets added this time, one more SoC will come in a follow-up branch. Most of the new boards are for 64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7.
Going more into details for SoC platforms with new hardware support:
- The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone platform, usually paired with an external 5G modem. So far we only support the Qualcomm SM8150 MTP reference platform, but no actual products.
- For the slightly older Qualcomm platforms, support for several interesting products is getting added: Three laptops based on Snapdragon 835/MSM8998 (Asus NovaGo, HP Envy X2 and Lenovo Miix 630), one laptop based on Snapdragon 850/sdm850 (Lenovo Yoga C630) and several phones based on the older Snapdragon 410/MSM8916 (Samsung A3 and A5, Longcheer L8150 aka Android One 2nd gen "seed" aka Wileyfox Swift).
- Mediatek MT7629 is a new wireless network router chip, similar to the older MT7623. It gets added together with the reference board implementation.
- Allwinner V3 is a repackaged version of the existing low-end V3s chip, and is used in the tiny Lichee Pi Zero plus, also added here. There is also a new TV set-top box based on Allwinner H6, the Tanix TX6, and the eMMC variant of the Olimex A64-Olinuxino development board.
- NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC family, similar to the i.MX8M Mini. As usual, there is a large number of new boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML, SolidRun Hummingboard Pulse baseboard and System-on-Module, Boundary Devices i.MX8MQ Nitrogen8M, and TechNexion PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit, we get the Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight Innovations i.MX7 RMU2 board.
- In a different NXP product line, the Layerscape LS1046A "Freeway" reference board gets added.
- Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from their set-top-box line and smart speaker with newer CPU and GPU cores compared to their predecessors. Both are now also supported by the Khadas VIM3 development board series, and the dts files for that get reorganized a bit to better deal with all variants. Another board based on SM1 that gets added is the SEI Robotics SEI610.
- There are a handful of new x86 and Power9 server boards using Aspeed BMC chips that are gaining support for running Linux on the BMC through the OpenBMC project: Facebook Minipack/Wedge100/Wedge40, Lenovo Hr855xg2, and Mihawk. Notably these are still new machines using SoCs based on the ARM9 and ARM11 CPU cores, as support for the new Cortex-A7 based AST2600 is still ramping up.
- There are three new end-user products using 32-bit Rockchips SoCs: Mecer Xtreme Mini S6 is an Android "mini PC" box based on the low-end RK3229 chip, while the two AOpen products Chromebox Mini (Fievel) and Chromebase Mini (Tiger) run ChromeOS and are meant for commercial settings(digital signage, PoS, ...).
- One more single-board computer based on the popular 64-bit RK3399 is added: the Leez RK3399 P710"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (467 commits) arm64: dts: qcom: Add Lenovo Yoga C630 ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit ARM; dts: aspeed: mihawk: File should not be executable ARM: dts: aspeed: swift: Change power supplies to version 2 ARM: dts: aspeed: vesnin: Add secondary SPI flash chip ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option ARM: dts: aspeed-g4: Add all flash chips ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250 ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks ARM: dts: exynos: Remove not accurate secondary ADC compatible arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328 arm64: dts: meson-sm1-sei610: add stdout-path property back arm64: dts: meson-sm1-sei610: enable DVFS arm64: dts: khadas-vim3: add support for the SM1 based VIM3L dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi arm64: dts: meson: g12a: add reset to tdm formatters ...
show more ...
|
#
08987822 |
| 16-Sep-2019 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 5.4 merge window.
|
#
d3f9990f |
| 14-Sep-2019 |
Takashi Iwai <tiwai@suse.de> |
Merge branch 'for-next' into for-linus
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
#
375a7bad |
| 12-Sep-2019 |
Arnd Bergmann <arnd@arndb.de> |
Merge branch 'aspeed/dt-3' into arm/late
* aspeed/dt-3: ARM: dts: aspeed: Add AST2600 pinmux nodes ARM: dts: aspeed: Add AST2600 and EVB clk: Add support for AST2600 SoC clk: aspeed: Move st
Merge branch 'aspeed/dt-3' into arm/late
* aspeed/dt-3: ARM: dts: aspeed: Add AST2600 pinmux nodes ARM: dts: aspeed: Add AST2600 and EVB clk: Add support for AST2600 SoC clk: aspeed: Move structures to header clk: aspeed: Add SDIO gate
show more ...
|
#
2ca5646b |
| 11-Sep-2019 |
Joel Stanley <joel@jms.id.au> |
ARM: dts: aspeed: Add AST2600 and EVB
The AST2600 is a new SoC by ASPEED. It contains a dual core Cortex A7 CPU and shares many periperhals with the existing AST2400 and AST2500.
Link: https://lore
ARM: dts: aspeed: Add AST2600 and EVB
The AST2600 is a new SoC by ASPEED. It contains a dual core Cortex A7 CPU and shares many periperhals with the existing AST2400 and AST2500.
Link: https://lore.kernel.org/r/20190911165614.31641-1-joel@jms.id.au Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
548d52bc |
| 28-Aug-2019 |
Lubomir Rintel <lkundrak@v3.sk> |
ARM: dts: mmp2: add OLPC XO 1.75 machine
This is a fairly complete description of an OLPC XO 1.75 laptop. What's missing for now is the GPU, LCD controller, DCON, the panel and audio.
The machine i
ARM: dts: mmp2: add OLPC XO 1.75 machine
This is a fairly complete description of an OLPC XO 1.75 laptop. What's missing for now is the GPU, LCD controller, DCON, the panel and audio.
The machine is booted with OpenFirmware and thus has a devicetree. However, older versions are unable to create a valid FDT and don't follow the Linux bindings. Having an device tree in the kernel tree makes it easier to use mainline kernels on such machines, test changes with CONFIG_ARM_APPENDED_DTB and give a good reference on what bindings are used on the machine without an access to one.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz>
show more ...
|
#
6075a130 |
| 05-Sep-2019 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'v5.4-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Removal of the rk3288-fennec board which never made it to any market.
* tag 'v5.4
Merge tag 'v5.4-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Removal of the rk3288-fennec board which never made it to any market.
* tag 'v5.4-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: dt-bindings: arm: rockchip: remove reference to fennec board ARM: dts: rockchip: remove rk3288 fennec board support
Link: https://lore.kernel.org/r/1718334.9BoTfW0Ujv@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
a0a4c25f |
| 03-Sep-2019 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'imx-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm32 device tree changes for 5.4: - New board support: ZII i.MX7 RMU2, Kontron i.MX6UL N6310
Merge tag 'imx-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm32 device tree changes for 5.4: - New board support: ZII i.MX7 RMU2, Kontron i.MX6UL N6310, and PHYTEC phyBOARD-Segin based on i.MX6ULL. - A series from Andrey Smirnov to update vf610-zii boards on I2C pinmux, switch watchdog, GPIO expander IRQ. - Move GIC node into soc node for i.MX6 SoCs. - Add OV5645 camera support for imx6qdl-wandboard board. - Drop unneeded snvs_pwrkey node for imx7d-zii-rpu2 and imx7-colibri. - Use simple-mfd instead of simple-bus for i.MX6 ANATOP. - Move the native-mode property inside the display-timings node for various i.MX25 and i.MX27 boards. - Add EDMA devices for i.MX7ULP SoC. - A series from Stefan Riedmueller to update imx6ul-phytec-segin board on various devices. - Use OF graph to describe the display for opos6uldev board. - Misc random updates on i.MX7/6 boards.
* tag 'imx-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits) ARM: dts: vf610-zii-scu4-aib: Configure IRQ line for GPIO expander ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards ARM: dts: vf610-zii-cfu1: Slow I2C0 down to 100 kHz ARM: dts: pbab01: correct rtc vendor ARM: vf610-zii-cfu1: Add node for switch watchdog ARM: dts: imx6: drop gpmi-nand address and size cells ARM: dts: imx6: replace simple-bus by simple-mfd for anatop ARM: dts: imx6qdl-colibri: add phy to fec ARM: dts: imx7-colibri: add recovery for I2C for iMX7 ARM: dts: imx7-colibri: Add sleep pinctrl to ethernet ARM: dts: imx7-colibri: prepare module device tree for FlexCAN ARM: dts: imx7-colibri: disable HS400 ARM: dts: imx7-colibri: make sure module supplies are always on ARM: dts: imx7d: cl-som-imx7: add compatible for phy ARM: dts: imx7d: cl-som-imx7: make ethernet work again ARM: dts: imx6ul: Add csi node ARM: dts: imx25: mbimxsd25: native-mode is part of display-timings ARM: dts: apf27dev: native-mode is part of display-timings ARM: dts: edb7211: native-mode is part of display-timings ARM: dts: imx27-phytec-phycore-rdk: native-mode is part of display-timings ...
Link: https://lore.kernel.org/r/20190825153237.28829-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
48dd4cf0 |
| 03-Sep-2019 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'aspeed-5.4-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt
ASPEED device tree updates for 5.4
New machines:
- Facebook Wedge100, Wedge40 and Minipa
Merge tag 'aspeed-5.4-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt
ASPEED device tree updates for 5.4
New machines:
- Facebook Wedge100, Wedge40 and Minipack - Lenovo Hr855xg2 - Wistron Mihawk
There's a few other updates, notably some changes to to use the newly added SDHCI driver.
* tag 'aspeed-5.4-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: swift: Add eMMC device ARM: dts: aspeed: Enable first MMC slot on AST2500 EVB ARM: dts: aspeed: Describe SD controllers ARM: dts: aspeed: Add Mihawk BMC platform ARM: dts: aspeed: fp5280g2: Fix power supply address ARM: dts: aspeed: tiogapass: Add Riser card ARM: dts: aspeed: tiogapass: Move battery sensor ARM: dts: aspeed: Add Facebook Wedge100 BMC ARM: dts: aspeed: Add Facebook Wedge40 BMC ARM: dts: aspeed: swift: Fix FSI GPIOs ARM: dts: aspeed: Add SGPM pinmux ARM: dts: aspeed: tiogapass: Add VR devices ARM: dts: aspeed: Add Lenovo Hr855xg2 BMC ARM: dts: aspeed: Add Facebook Minipack BMC
Link: https://lore.kernel.org/r/CACPK8XfKHpNYXNE_VRaLeGUQa7-hkmUS0nsPfaeSLE4sckKFHg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
90104e2b |
| 03-Sep-2019 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'v5.3-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
add support for the mt7629 reference board
* tag 'v5.3-next-dts32' of git://git.kernel.or
Merge tag 'v5.3-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
add support for the mt7629 reference board
* tag 'v5.3-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mediatek: add basic support for MT7629 SoC
Link: https://lore.kernel.org/r/e236f659-2851-21b8-1873-314cd72ed6be@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
db2f7fe5 |
| 03-Sep-2019 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner DT changes for 5.4
Our usual pile of patches for the next release, which include mo
Merge tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner DT changes for 5.4
Our usual pile of patches for the next release, which include mostly: - More fixes thanks to the DT validation using the YAML bindings - IR receiver support on the H6 - SPDIF support on the H6 - I2C Support on the H6 - CSI support on the A20 - RTC support on the H6 - New Boards: Lichee Zero Plus, Tanix TX6, A64-Olinuxino-eMMC
* tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (40 commits) arm64: dts: allwinner: orange-pi-3: Enable WiFi ARM: dts: sunxi: Add missing watchdog clocks ARM: dts: sunxi: Add missing watchdog interrupts arm64: dts: allwinner: h6: Add support for RTC and fix the clock tree ARM: dts: sun7i: Add CSI0 controller arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC) dt-bindings: arm: sunxi: Add compatible for A64 OlinuXino with eMMC ARM: dts: v3s: Change the timers compatible ARM: dts: h3: Change the timers compatible ARM: dts: a83t: Change the timers compatible ARM: dts: a23/a33: Change the timers compatible ARM: dts: sun6i: Add missing timers interrupts ARM: dts: sun5i: Add missing timers interrupts ARM: dts: sun4i: Add missing timers interrupts dt-bindings: mfd: Convert Allwinner GPADC bindings to a schema arm64: dts: allwinner: h6: Introduce Tanix TX6 board dt-bindings: arm: sunxi: Add compatible for Tanix TX6 board arm64: allwinner: h6: add I2C nodes dt-bindings: i2c: mv64xxx: Add compatible for the H6 i2c node. ARM: dts: sunxi: Add mdio bus sub-node to GMAC ...
Link: https://lore.kernel.org/r/d97e6252-9dd7-4cf5-a3cf-56f78b0ca455.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
745d0c93 |
| 03-Sep-2019 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'v5.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
A lot more love for Veyron devices with cleanups in the display and wifi areas and
Merge tag 'v5.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
A lot more love for Veyron devices with cleanups in the display and wifi areas and also a 100ms speedup as a delay isn't needed anymore. New boards are Tiger and Fievel from the Veyron family and the Mecer Xtreme Mini S6, which I think is the first consumer-grade rk3229-based device in the kernel.
* tag 'v5.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: add device tree for Mecer Xtreme Mini S6 Revert "ARM: dts: rockchip: add startup delay to rk3288-veyron panel-regulators" ARM: dts: rockchip: Add pin names for rk3288-veyron fievel ARM: dts: rockchip: A few fixes for veyron-{fievel,tiger} ARM: dts: rockchip: Cleanup style around assignment operator ARM: dts: rockchip: add veyron-tiger board ARM: dts: rockchip: add veyron-fievel board dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-{fievel,tiger} ARM: dts: rockchip: consolidate veyron panel and backlight settings ARM: dts: rockchip: move rk3288-veryon display settings into a separate file ARM: dts: rockchip: Limit WiFi TX power on rk3288-veyron-jerry ARM: dts: rockchip: Specify rk3288-veyron-minnie's display timings ARM: dts: rockchip: Specify rk3288-veyron-chromebook's display timings
Link: https://lore.kernel.org/r/1611583.rKl1eQBRh8@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
1ea4b76c |
| 22-Aug-2019 |
Krzysztof Kozlowski <krzk@kernel.org> |
ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards
Add support for i.MX6UL modules from Kontron Electronics GmbH (before acquisition: Exceet Electronics) and evalkit boards bas
ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards
Add support for i.MX6UL modules from Kontron Electronics GmbH (before acquisition: Exceet Electronics) and evalkit boards based on it:
1. N6310 SOM: i.MX6 UL System-on-Module, a 25x25 mm solderable module (LGA pads and pin castellations) with 256 MB RAM, 1 MB NOR-Flash, 256 MB NAND and other interfaces, 2. N6310 S: evalkit, w/wo eMMC, without display, 3. N6310 S 43: evalkit with 4.3" display,
The work is based on Exceet/Kontron source code (GPLv2) with numerous changes: 1. Reorganize files, 2. Rename Exceet -> Kontron, 3. Rename models/compatibles to match newest Kontron product naming, 4. Fix coding style errors and adjust to device tree coding guidelines, 5. Fix DTC warnings, 6. Extend compatibles so eval boards inherit the SoM compatible, 7. Use defines instead of GPIO and interrupt flag values, 8. Use proper vendor compatible for Macronix SPI NOR, 9. Replace deprecated bindings with proper ones, 10. Sort nodes alphabetically, 11. Remove Admatec display nodes (not yet supported).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
#
6f50fa2a |
| 23-Aug-2019 |
Benjamin Tissoires <benjamin.tissoires@redhat.com> |
Merge branch 'master' into for-5.4/logitech
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
|
#
6f002c57 |
| 28-Jul-2019 |
Icenowy Zheng <icenowy@aosc.io> |
ARM: dts: sun8i: s3: add devicetree for Lichee zero plus w/ S3
Lichee zero plus is a core board made by Sipeed, which includes on-board TF slot or SMT SD NAND, and optional SPI NOR or eMMC, a UART d
ARM: dts: sun8i: s3: add devicetree for Lichee zero plus w/ S3
Lichee zero plus is a core board made by Sipeed, which includes on-board TF slot or SMT SD NAND, and optional SPI NOR or eMMC, a UART debug header, a microUSB slot and a gold finger connector for expansion. It can use either Sochip S3 or Allwinner S3L SoC.
Add the basic device tree for the core board, w/o optional onboard storage, and with S3 SoC.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
#
75bf465f |
| 23-Aug-2019 |
Paul Mackerras <paulus@ozlabs.org> |
Merge remote-tracking branch 'remotes/powerpc/topic/ppc-kvm' into kvm-ppc-next
This merges in fixes for the XIVE interrupt controller which touch both generic powerpc and PPC KVM code. To avoid mer
Merge remote-tracking branch 'remotes/powerpc/topic/ppc-kvm' into kvm-ppc-next
This merges in fixes for the XIVE interrupt controller which touch both generic powerpc and PPC KVM code. To avoid merge conflicts, these commits will go upstream via the powerpc tree as well as the KVM tree.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
show more ...
|
#
3bf7ec62 |
| 21-Aug-2019 |
Kever Yang <kever.yang@rock-chips.com> |
ARM: dts: rockchip: remove rk3288 fennec board support
Since there is no one using this board, remove it.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@
ARM: dts: rockchip: remove rk3288 fennec board support
Since there is no one using this board, remove it.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
show more ...
|
#
cc212241 |
| 11-Jul-2019 |
Ryder Lee <ryder.lee@mediatek.com> |
arm: dts: mediatek: add basic support for MT7629 SoC
This adds basic support for MT7629 reference board.
Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.
arm: dts: mediatek: add basic support for MT7629 SoC
This adds basic support for MT7629 reference board.
Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
show more ...
|
#
dd7c66ac |
| 12-Aug-2019 |
Justin Swartz <justin.swartz@risingedge.co.za> |
ARM: dts: add device tree for Mecer Xtreme Mini S6
The Mecer Xtreme Mini S6 features a Rockchip RK3229 SoC, 1GB DDR3 RAM, 8GB eMMC, MicroSD port, 10/100Mbps Ethernet, Realtek 8723BS WLAN module, 2 x
ARM: dts: add device tree for Mecer Xtreme Mini S6
The Mecer Xtreme Mini S6 features a Rockchip RK3229 SoC, 1GB DDR3 RAM, 8GB eMMC, MicroSD port, 10/100Mbps Ethernet, Realtek 8723BS WLAN module, 2 x USB 2.0 ports, HDMI output, and S/PDIF output.
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
show more ...
|
#
0a1dcf95 |
| 12-Aug-2019 |
Ben Pai <Ben_Pai@wistron.com> |
ARM: dts: aspeed: Add Mihawk BMC platform
The Mihawk BMC is an ASPEED ast2500 based BMC that is part of an OpenPower Power9 server.
Signed-off-by: Ben Pai <Ben_Pai@wistron.com> Reviewed-by: Andrew
ARM: dts: aspeed: Add Mihawk BMC platform
The Mihawk BMC is an ASPEED ast2500 based BMC that is part of an OpenPower Power9 server.
Signed-off-by: Ben Pai <Ben_Pai@wistron.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
#
58e16d79 |
| 13-Aug-2019 |
Tony Lindgren <tony@atomide.com> |
Merge branch 'ti-sysc-fixes' into fixes
|
#
cbd32a1c |
| 12-Aug-2019 |
Thomas Gleixner <tglx@linutronix.de> |
Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent
Pull a single EFI fix for v5.3 from Ard:
- Fix mixed mode breakage in EFI config table handling for
Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent
Pull a single EFI fix for v5.3 from Ard:
- Fix mixed mode breakage in EFI config table handling for TPM.
show more ...
|
#
4aa31b4b |
| 12-Aug-2019 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.3-rc4' into next
Sync up with mainline to bring in device_property_count_u32 andother newer APIs.
|
#
3f61fd41 |
| 09-Aug-2019 |
Alex Deucher <alexander.deucher@amd.com> |
Merge tag 'v5.3-rc3' into drm-next-5.4
Linux 5.3-rc3
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|