Merge tag 'at91-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt

AT91 DT #1 for 5.17:

- 2 low priority fixes about pin function for sama7g5 and better
tailored mmc

Merge tag 'at91-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt

AT91 DT #1 for 5.17:

- 2 low priority fixes about pin function for sama7g5 and better
tailored mmc interface on sama5d2 xplained
- Addition of the Microchip EVB-KSZ9477: a Gigabit Ethernet
managed Switch Evaluation Board
- QSPI: addition of sama5d2 clock name and nodes for new sama7g7 and its
associated Evaluation Kit

* tag 'at91-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5ek: Add QSPI0 node
ARM: dts: at91: sama7g5: Add QSPI nodes
ARM: dts: at91: sama5d2: Name the qspi clock
ARM: dts: at91: add Microchip EVB-KSZ9477 board
ARM: dts: at91: sama5d2_xplained: remove PA11__SDMMC0_VDDSEL from pinctrl
ARM: dts: at91: update alternate function of signal PD20

Link: https://lore.kernel.org/r/20211213161451.90786-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: dts: qcom: Build apq8016-sbc/DragonBoard 410c DTB on ARM32

The DragonBoard 410c is a convenient device for testing and debugging.
Since there is support for using ARM32 kernels on MSM8916 now,

ARM: dts: qcom: Build apq8016-sbc/DragonBoard 410c DTB on ARM32

The DragonBoard 410c is a convenient device for testing and debugging.
Since there is support for using ARM32 kernels on MSM8916 now, also
build the DB410c DTB on ARM32 so it can be used for testing. ARM64
is still the main supported architecture for DB410c but it actually
works great on ARM32 as well.

The "apq8016-sbc.dts" is simply included as-is from ARM64 similar
to the approach used for Raspberry Pi (e.g. bcm2711-rpi-4-b.dts).

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213113250.4249-1-stephan@gerhold.net

show more ...

ARM: dts: ixp4xx: Add devicetree for Gateway 7001

This adds a device tree for the Gateway 7001 AP, based on
Intel IXP422.

Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Zoltan HERPAI <wigyori@ui

ARM: dts: ixp4xx: Add devicetree for Gateway 7001

This adds a device tree for the Gateway 7001 AP, based on
Intel IXP422.

Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not specified in the device tree, this function
returns NULL instead of an error."

This dependency is needed for the Generic Timer Module (a.k.a OSTM)
support for RZ/G2L.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

show more ...

Merge tag 'v5.15' into next

Sync up with the mainline to get the latest APIs and DT bindings.

ARM: dts: at91: add Microchip EVB-KSZ9477 board

Add KSZ9477 managed switch evaluation kit with SAMA5D36 MPU:
https://www.microchip.com/en-us/development-tool/evb-ksz9477

Signed-off-by: Oleksij Remp

ARM: dts: at91: add Microchip EVB-KSZ9477 board

Add KSZ9477 managed switch evaluation kit with SAMA5D36 MPU:
https://www.microchip.com/en-us/development-tool/evb-ksz9477

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211111081045.711323-1-o.rempel@pengutronix.de

show more ...

ARM: dts: imx6dl-yapp4: Add Y Soft IOTA Crux/Crux+ board

Add devicetrees for the new boards in the Y Soft IOTA family.
These boards are based on Orion but use Quad/QuadPlus SoC
instead of DualLite.

ARM: dts: imx6dl-yapp4: Add Y Soft IOTA Crux/Crux+ board

Add devicetrees for the new boards in the Y Soft IOTA family.
These boards are based on Orion but use Quad/QuadPlus SoC
instead of DualLite.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: aspeed: add device tree for YADRO VEGMAN BMC

YADRO VEGMAN is x86 based servers family with ASPEED AST2500-based BMC.
Currently there are three models:
* VEGMAN N110
* VEGMAN S220/320
* VEG

ARM: dts: aspeed: add device tree for YADRO VEGMAN BMC

YADRO VEGMAN is x86 based servers family with ASPEED AST2500-based BMC.
Currently there are three models:
* VEGMAN N110
* VEGMAN S220/320
* VEGMAN R120/220

The dts files provides configuration for BMC system.

Signed-off-by: Andrei Kartashev <a.kartashev@yadro.com>
Link: https://lore.kernel.org/r/20211119120057.12118-3-a.kartashev@yadro.com
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>

show more ...

ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF

Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.

Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A

ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF

Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.

Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- 10" LVDS Panel (SN65DSI84 DSI-LVDS bridge on SoM)

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.

i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with
pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0
10.1" Open Frame board.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

ARM: dts: Add Goramo MultiLink device tree

This adds a device tree for the Goramo MultiLink IXP425-based
WAN router.

Cc: Krzysztof Hałasa <khalasa@piap.pl>
Cc: openwrt-devel@lists.openwrt.org
Signe

ARM: dts: Add Goramo MultiLink device tree

This adds a device tree for the Goramo MultiLink IXP425-based
WAN router.

Cc: Krzysztof Hałasa <khalasa@piap.pl>
Cc: openwrt-devel@lists.openwrt.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

ARM: dts: imx6qdl: add TQ-Systems MBa6x device trees

Add device trees for the MBa6x mainboard with TQMa6Q/QP/DL SoMs.

As discussed, all new files are added with GPL-2.0-only license, as they
are to

ARM: dts: imx6qdl: add TQ-Systems MBa6x device trees

Add device trees for the MBa6x mainboard with TQMa6Q/QP/DL SoMs.

As discussed, all new files are added with GPL-2.0-only license, as they
are too tightly intertwined with the SoC DTSIs imx6dl.dtsi and imx6q.dtsi,
which are GPL-2.0.

Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: add JOZ Access Point

JOZ Access Point is imx6ull based device designed for agricultural
cleaning machines.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo

ARM: dts: add JOZ Access Point

JOZ Access Point is imx6ull based device designed for agricultural
cleaning machines.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next

Sync up with drm-next to get v5.16-rc2.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Thomas needs the dma_resv_for_each_fence API for i915/ttm async migration
work.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging from drm/drm-next for v5.16-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-fixes into drm-misc-fixes

We need -rc1 to address a breakage in drm/scheduler affecting panfrost.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

arm: dts: mt6589: Add device tree for Fairphone 1

Add rudimentary support for the Fairphone 1, based on MT6589 to boot to
UART console.

The recently added SMP support needs to be disabled for this

arm: dts: mt6589: Add device tree for Fairphone 1

Add rudimentary support for the Fairphone 1, based on MT6589 to boot to
UART console.

The recently added SMP support needs to be disabled for this board as
the kernel panics executing /init with it, even though the CPUs seem to
start up fine - maybe a stability issue.

[ 0.072010] smp: Bringing up secondary CPUs ...
[ 0.131888] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.191889] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.251890] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.251982] smp: Brought up 1 node, 4 CPUs
[ 0.254745] SMP: Total of 4 processors activated (7982.28 BogoMIPS).
[ 0.255582] CPU: All CPU(s) started in SVC mode.

[ 0.472039] Run /init as init process
[ 0.473317] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20211024084535.30959-1-luca@z3ntu.xyz
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

show more ...

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up some tools/perf/ patches that went via tip/perf/core, such
as:

tools/perf: Add mem_hops field in perf_mem_data_src structu

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up some tools/perf/ patches that went via tip/perf/core, such
as:

tools/perf: Add mem_hops field in perf_mem_data_src structure

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC DT updates from Arnd Bergmann:
"This is a rather large update for the ARM devicetree files, after a
few q

Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC DT updates from Arnd Bergmann:
"This is a rather large update for the ARM devicetree files, after a
few quieter releases, with 775 total commits and 47 branches pulled
into this one.

There are 5 new SoC types plus some minor variations, and a total of
60 new machines, so I'm limiting the summary to the main noteworthy
items:

- Apple M1 gain support for PCI and pinctrl, getting a bit closer to
a usable system out of the box.

- Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
SM7225, 11 new smartphones, and three additional Chromebooks, and
improvements all over the place.

- Samsung gains support for ExynosAutov9, an automotive version of
their smartphone SoC, but otherwise no major changes.

- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
of improvements for the recently added SAMA7 family. The LAN966 SoC
that was added in the platform code does not have dts files yet.
Two board files are added for the older at91sam9g20 SoC

- Aspeed supports two additional server boards using their AST2600 as
BMC, and improves support for qemu models

- Rockchip RK3566/RK3688 gets added, along with six new development
boards using RK3328/RK3399/RK3566, and one Chromebook tablet.

- Two NAS boxes are added using the ARMv4 based Gemini platform

- One new board is added to the Intel Arria SoC FPGA family

- Marvell adds one network switch based on Armada 381 and the new
MOCHAbin 7040 development board

- NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
readers, and three additional development boards, which is notably
less than their usual additions, but they also gain improvements to
their many existing boards

- STmicroelectronics adds their stm32mp13 SoC family along with a
reference board

- Renesas adds new versions of their R-Car Gen3 SoCs and many updates
for their older generations

- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards

- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs

- NVIDIA adds a number of cleanups and additional support for more
hardware on the already supported machines

- TI K3 adds support for three new boards along with cleanups

- Toshiba adds one board for the Visconti family

- Xilinx adds five new ZynqMP based machines

- Amlogic support is added for the Radxa Zero and two Jethub home
automation controllers, along with changes to other machines

- Rob Herring continues his work on fixing dtc warnings all over the
tree.

- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc"

* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
arm64: dts: apple: t8103: Add root port interrupt routing
arm64: dts: apple: t8103: Add PCIe DARTs
arm64: apple: Add PCIe node
arm64: apple: Add pinctrl nodes
ARM: dts: arm: Update ICST clock nodes 'reg' and node names
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
arm64: dts: exynos: add chipid node for exynosautov9 SoC
ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
...

show more ...

Merge tag 'qcom-arm64-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DTS additional patches for v5.16

The RPM and RPMh sleep stats are introduced

Merge tag 'qcom-arm64-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DTS additional patches for v5.16

The RPM and RPMh sleep stats are introduced on a number of platforms, to
aid the enablement of entering low power mode.

The MSM8916 support receives some polishing touches, followed by
introduction of the necessary pieces to use the DeviceTree on 32-bit
variants of the MSM8916 platform, in particular to boot the secondary
CPUs. Based on this support for the Samsung Galaxy S4 Mini Value Edition
is introduced.

The Asus Zenfone 2 Laser gained touchscreen, sensors and sdcard support.

MSM8996 got support for the its crypto hardware and the Xiaomi Mi 5
gained a description of its LCD panel.

The Trogdor device on SC7180 gained support for a second source eDP
brigde, while SC7280 gains PCIe support and the newly introduced
Herobrine device.

Both MSM8916 and SDM845 has their standalong SMEM node dropped, in favour
of the newly introduced support for specifying the compatible directly
on the reserved-memory node.

The SM7225 platform is introduced, as a derrivative of SM6350, initial
support for the PM6350 PMIC and based on this the Fairphone 4 is
introduced.

The RB3 and RB5 devices gains msm-id and board-id, to allow the two DTBs
to be baked into a single boot.img that can be booted on both devices.

As the GDSC driver has been extended to properly describe the
relationship between MMCX and MDSS_GDSC, the now deprecated mmcx
regulator is removed from SM8250.

SM8350 gained CPU topology, idle-states and fastrpc support. FastRPC was
also added for SM8150 and the SA8155p ADP got a couple of remoteprocs
enabled.

Additionally a number of DT validation issues was corrected across the
various platforms and devices.

* tag 'qcom-arm64-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (77 commits)
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
arm64: dts: qcom: sdm845: Fix Qualcomm crypto engine bus clock
arm64: dts: qcom: msm8996: Add device tree entries to support crypto engine
arm64: dts: qcom: msm8996: move clock-frequency from PN547 NFC to I2C bus
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: sdm630: Add disabled Venus support
arm64: dts: qcom: pm660l: Remove board-specific WLED configuration
arm64: dts: qcom: Move WLED num-strings from pmi8994 to sony-xperia-tone
arm64: dts: qcom: pmi8994: Remove hardcoded linear WLED enabled-strings
arm64: dts: qcom: pmi8994: Fix "eternal"->"external" typo in WLED node
...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'qcom-dts-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm DTS more changes for v5.16

The multi-purpose-pin (MPP) driver is finally migrated to

Merge tag 'qcom-dts-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm DTS more changes for v5.16

The multi-purpose-pin (MPP) driver is finally migrated to use
hierarchical IRQ domains, so this bring the associated changes.

The remainder of the changes are correcting binding issues, primarily
found through DT validation.

* tag 'qcom-dts-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (26 commits)
ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
ARM: dts: qcom: fix thermal zones naming
ARM: dts: qcom: fix flash node naming for RB3011
ARM: dts: qcom: correct mmc node naming
ARM: dts: qcom: fix memory and mdio nodes naming for RB3011
dt-bindings: arm: qcom: Fix Nexus 4 vendor prefix
ARM: dts: ipq4019-ap.dk01.1-c1: add device compatible in the dts
dt-bindings: arm: qcom-ipq4019: add missing device compatible
ARM: dts: qcom: apq8026-lg-lenok: rename board vendor
dt-bindings: arm: qcom: rename vendor of apq8026-lenok
ARM: dts: qcom: sdx55: Drop '#clock-cells' from QMP PHY node
ARM: dts: qcom: mdm9615: fix memory node for Sierra Wireless WP8548
ARM: dts: qcom-pma8084: add interrupt controller properties
ARM: dts: qcom-pm8941: add interrupt controller properties
ARM: dts: qcom-pm8841: add interrupt controller properties
ARM: dts: qcom-msm8660: add interrupt controller properties
ARM: dts: qcom-mdm9615: add interrupt controller properties
ARM: dts: qcom-apq8064: add interrupt controller properties
ARM: dts: qcom-apq8060-dragonboard: fix mpps state names
ARM: dts: qcom-mdm9615: add gpio-ranges to mpps node, fix its name
...

Link: https://lore.kernel.org/r/20211026135855.1205262-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: dts: qcom: apq8026-lg-lenok: rename board vendor

In order to avoid having prefixes for multiple internal divisions of LG
use the "lg" prefix instead of "lge".

Fixes: ad3f04b7bef6 ("ARM: dts: q

ARM: dts: qcom: apq8026-lg-lenok: rename board vendor

In order to avoid having prefixes for multiple internal divisions of LG
use the "lg" prefix instead of "lge".

Fixes: ad3f04b7bef6 ("ARM: dts: qcom: Add support for LG G Watch R")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928203815.77175-2-luca@z3ntu.xyz

show more ...

ARM: dts: qcom: msm8916-samsung-serranove: Include dts from arm64

After adding all necessary support for MSM8916 SMP/cpuidle without PSCI
on ARM32, build the Samsung Galaxy S4 Mini VE device tree fr

ARM: dts: qcom: msm8916-samsung-serranove: Include dts from arm64

After adding all necessary support for MSM8916 SMP/cpuidle without PSCI
on ARM32, build the Samsung Galaxy S4 Mini VE device tree from the arm64
tree together with the ARM32 include to allow booting this device on ARM32.

The approach to include device tree files from other architectures is
inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is
used to build the device tree for both ARM32 and ARM64.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-15-stephan@gerhold.net

show more ...

Merge tag 'aspeed-5.16-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt

ASPEED device tree updates for 5.16, round 2

- New machines:

* Inventec Transformers,

Merge tag 'aspeed-5.16-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt

ASPEED device tree updates for 5.16, round 2

- New machines:

* Inventec Transformers, an x86 family server with an AST2600 BMC

- Updates to the Everest and Rainier sensors, gpios and KCS devices

- New UART routing device tree description

* tag 'aspeed-5.16-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: Add uart routing to device tree
ARM: dts: aspeed: rainier: Enable earlycon
ARM: dts: aspeed: rainier: Add front panel LEDs
ARM: dts: aspeed: rainier: Add 'factory-reset-toggle' as GPIOF6
ARM: dts: aspeed: rainier: Remove PSU gpio-keys
ARM: dts: aspeed: rainier: Remove gpio hog for GPIOP7
ARM: dts: aspeed: rainier: Add eeprom on bus 12
ARM: dts: aspeed: p10bmc: Enable KCS channel 2
ARM: dts: aspeed: p10bmc: Use KCS 3 for MCTP binding
ARM: dts: aspeed: Adding Inventec Transformers BMC
ARM: dts: aspeed: everest: Fix bus 15 muxed eeproms
ARM: dts: aspeed: everest: Add IBM Operation Panel I2C device
ARM: dts: aspeed: everest: Add I2C switch on bus 8
ARM: dts: aspeed: rainier and everest: Remove PCA gpio specification
ARM: dts: aspeed: p10bmc: Fix ADC iio-hwmon battery node name

Link: https://lore.kernel.org/r/CACPK8Xd=eAMk-S3akhGgL4i_K190Nz9t=_CrdHQMJ+nbW172mg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

dts: socfpga: Add Mercury+ AA1 devicetree

Add support for the Mercury+ AA1 module for Arria 10 SoC FPGA.

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Signed-off-by: Joanna Brozek <jbrozek@antmic

dts: socfpga: Add Mercury+ AA1 devicetree

Add support for the Mercury+ AA1 module for Arria 10 SoC FPGA.

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Signed-off-by: Joanna Brozek <jbrozek@antmicro.com>
Signed-off-by: Mariusz Glebocki <mglebocki@antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Signed-off-by: Maciej Mikunda <mmikunda@antmicro.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211021151736.2096926-2-pan@semihalf.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...