#
3976d758 |
| 02-Aug-2022 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann: "As usual, the bulk of the changes for the SoC tree are devicetree file upd
Merge tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann: "As usual, the bulk of the changes for the SoC tree are devicetree file updates, and most of these changes are for 64-bit embedded machines. As before, there are a ton of style cleanups, and additional hardware support for existing machines.
Looking only at the new SoC, the notable additions are:
- A whole family of Broadcom broadband SoCs, both 32-bit and 64-bit: BCM63178, BCM63158, BCM4912, BCM6858, BCM6878, BCM6846, BCM63146, BCM6856, BCM6855, BCM6756, BCM63148, and BCM6813. Each SoC comes with a corresponding reference board.
- The new NXP i.MX93 SoC, the follow-up to the popular i.MX6 and i.MX8 embedded SoCs, now using Cortex-A55 cores and the Ethos-U65 NPU.
- Qualcomm Snapdragon 8cx Gen3 (SC8280XP), the current high end of Arm based Laptop SoCs, and its automotive cousin, the SA8540P. The SC8280XP is used in the Lenovo Thinkpad X13s laptop that also gets added here in addition to the reference boards.
- Allwinner H616, a newer version of the H6 SoC, targeted at Set-top-box applications. It comes with dts files for the Orange Pi zero2 single-board computer and the X96 Mate set-top-box
- Marvell Prestera 98DX2530 (AlleyCat5), a network switch chip in the Armada SoC family based on the Cortex-A55 core.
New machines based on previously supported SoCs include:
- Several new machines on NXP i.MX platforms: multiple Toradex Colibri boards using the "Iris" and "Ixora" carriers, DH electronics i.MX8M Plus DHCOM and PDK2, TQ-Systems TQMa8MPQL, and phytech phyBOARD-Polis-i.MX8MM.
- Google Chameleon v3 FPGA board based on Intel Arria10 and Stratix 10 Software Virtual platform, both in the SoCFPGA platform.
- Two new wireless devices based on Broadcom SoCs: The Asus GT-AX6000 Router and the Cisco Meraki MR26 access point
- Improved Chromebook support for both the Mediatek and Qualcomm SoC families brought added machines: Acer Chromebook 514 (MT8192), Acer Chromebook Spin 513 (MT8195) and a couple of SC7180 based machines including the Lenovo IdeaPad Chromebook Duet 3.
- Xiaomi Mi Mix2s, LG G7 and LG V35 are mobile phones based on Qualcomm SDM845, while Mi 5s Plus is based on MSM8996.
- Finally, there are a few development board on other chips: PCB8309 (Microchip lan966x), Radxa Rock Pi S (Rockchips RK3308) DH DRC Compact (ST STM32MP1) and Inforce IFC6560 (Qualcomm SDM660)"
* tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (829 commits) dt-bindings: soc: bcm: use absolute path to other schema dt-bindings: soc: bcm: drop quotes when not needed dt-bindings: soc: microchip: use absolute path to other schema dt-bindings: soc: microchip: drop quotes when not needed ARM: dts: lan966x: keep lan966 entries alphabetically sorted ARM: dts: lan966x: add support for pcb8309 dt-bindings: arm: at91: add lan966 pcb8309 board ARM: dts: lan966x: Enable network driver on pcb8291 ARM: dts: lan966x: Disable can0 on pcb8291 ARM: dts: lan966x: Add gpio-restart dt-bindings: arm: aspeed: add Aspeed Evaluation boards arm64: dts: qcom: Add support for Xiaomi Mi Mix2s dt-bindings: arm: qcom: Add Xiaomi Mi Mix2s bindings dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices dt-bindings: arm: qcom: add missing SM6350 board compatibles dt-bindings: arm: qcom: add missing SM6125 board compatibles dt-bindings: arm: qcom: add missing SDM845 board compatibles dt-bindings: arm: qcom: add missing SDM636 board compatibles dt-bindings: arm: qcom: add missing SDM630 board compatibles dt-bindings: arm: qcom: add missing QCS404 board compatibles ...
show more ...
|
#
0d98fbcf |
| 02-Aug-2022 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'socfpga_updates_for_v5.20_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/late
SoCFPGA dts updates for v5.20, part 2 - Update EMAC AXI settings for Cyclone
Merge tag 'socfpga_updates_for_v5.20_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/late
SoCFPGA dts updates for v5.20, part 2 - Update EMAC AXI settings for Cyclone5
* tag 'socfpga_updates_for_v5.20_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: add EMAC AXI settings for Cyclone5 arm64: dts: altera: socfpga_stratix10: move clocks out of soc node arm64: dts: Add support for Stratix 10 Software Virtual Platform dt-bindings: altera: document Stratix 10 SWVP compatibles arm64: dts: altera: adjust whitespace around '=' arm64: dts: intel: socfpga_agilex: use defined GIC interrupt type for ECC dt-bindings: altera: Add Chameleon v3 board ARM: dts: socfpga: Add Google Chameleon v3 devicetree ARM: dts: socfpga: Add atsha204a node to Mercury+ AA1 dts ARM: dts: socfpga: Move sdmmc-ecc node to Arria 10 dts ARM: dts: socfpga: Change Mercury+ AA1 dts to dtsi
Link: https://lore.kernel.org/r/20220728223237.3184243-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
9661524b |
| 01-Aug-2022 |
Richard Weinberger <richard@nod.at> |
Merge tag 'spi-nor/for-5.20' into mtd/next
SPI NOR core changes: - move SECT_4K_PMC flag out of the core as it's a vendor specific flag - s/addr_width/addr_nbytes: address width means the number of
Merge tag 'spi-nor/for-5.20' into mtd/next
SPI NOR core changes: - move SECT_4K_PMC flag out of the core as it's a vendor specific flag - s/addr_width/addr_nbytes: address width means the number of IO lines used for the address, whereas in the code it is used as the number of address bytes. - do not change nor->addr_nbytes at SFDP parsing time. At the SFDP parsing time we should not change members of struct spi_nor, but instead fill members of struct spi_nor_flash_parameters which could later on be used by the callers. - track flash's internal address mode so that we can use 4B opcodes together with opcodes that don't have a 4B opcode correspondent.
SPI NOR manufacturer drivers changes: - esmt: Rename "f25l32qa" flash name to "f25l32qa-2s". - micron-st: Skip FSR reading if SPI controller does not support it to allow flashes that support FSR to work even when attached to such SPI controllers. - spansion: Add s25hl-t/s25hs-t IDs and fixups.
show more ...
|
#
28188546 |
| 27-Jul-2022 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'at91-dt-5.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for v5.20 #4
It contains one new LAN966 based board, namely pcb8309, a cleanup on Makefile
Merge tag 'at91-dt-5.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for v5.20 #4
It contains one new LAN966 based board, namely pcb8309, a cleanup on Makefile to sort alphabetically LAN966 entries and 2 cleanups on bindings.
* tag 'at91-dt-5.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: dt-bindings: soc: microchip: use absolute path to other schema dt-bindings: soc: microchip: drop quotes when not needed ARM: dts: lan966x: keep lan966 entries alphabetically sorted ARM: dts: lan966x: add support for pcb8309 dt-bindings: arm: at91: add lan966 pcb8309 board
Link: https://lore.kernel.org/r/20220727075749.2445000-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
ed65704f |
| 26-Jul-2022 |
Claudiu Beznea <claudiu.beznea@microchip.com> |
ARM: dts: lan966x: keep lan966 entries alphabetically sorted
Keep LAN966 entries alphabetically sorted.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Krzysztof Kozlowski <k
ARM: dts: lan966x: keep lan966 entries alphabetically sorted
Keep LAN966 entries alphabetically sorted.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220726084931.1789855-1-claudiu.beznea@microchip.com
show more ...
|
#
6239b21b |
| 22-Jul-2022 |
Horatiu Vultur <horatiu.vultur@microchip.com> |
ARM: dts: lan966x: add support for pcb8309
Add basic support for pcb8309. It is similar with pcb8291 with one big difference that is having 2 SFP cages. Therefore it has 4 network ports.
Signed-off
ARM: dts: lan966x: add support for pcb8309
Add basic support for pcb8309. It is similar with pcb8291 with one big difference that is having 2 SFP cages. Therefore it has 4 network ports.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220722131836.2377720-3-horatiu.vultur@microchip.com
show more ...
|
#
3c69a99b |
| 25-Jul-2022 |
Michael Ellerman <mpe@ellerman.id.au> |
Merge tag 'v5.19-rc7' into fixes
Merge v5.19-rc7 into fixes to bring in: d11219ad53dc ("amdgpu: disable powerpc support for the newer display engine")
|
Revision tags: v5.19-rc7, v5.19-rc6, v5.19-rc5, v5.19-rc4 |
|
#
390ffde2 |
| 23-Jun-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
ARM: dts: aspeed: centriq2400: drop the board
The board is unmaintained and unused, according to Joel, so simply let's remove it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
ARM: dts: aspeed: centriq2400: drop the board
The board is unmaintained and unused, according to Joel, so simply let's remove it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/all/CACPK8XfxXi8kQr+vxta8rD6SBgxLf_oBjAH0UkPBacQta552YQ@mail.gmail.com/ Link: https://lore.kernel.org/r/20220623072428.33697-1-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
0698461a |
| 18-Jul-2022 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
Merge remote-tracking branch 'torvalds/master' into perf/core
To update the perf/core codebase.
Fix conflict by moving arch__post_evsel_config(evsel, attr) to the end of evsel__config(), after what
Merge remote-tracking branch 'torvalds/master' into perf/core
To update the perf/core codebase.
Fix conflict by moving arch__post_evsel_config(evsel, attr) to the end of evsel__config(), after what was added in:
49c692b7dfc9b6c0 ("perf offcpu: Accept allowed sample types only")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
show more ...
|
#
7cb7b8fe |
| 18-Jul-2022 |
Arnd Bergmann <arnd@arndb.de> |
Merge branch 'sunplus/newsoc' into arm/newsoc
Merge "Sunplus SP7021 SoC support" from Qin Jian, applied as patches:
"Sunplus SP7021 is an ARM Cortex A7 (4 cores) based SoC. It integrates many pe
Merge branch 'sunplus/newsoc' into arm/newsoc
Merge "Sunplus SP7021 SoC support" from Qin Jian, applied as patches:
"Sunplus SP7021 is an ARM Cortex A7 (4 cores) based SoC. It integrates many peripherals (ex: UART, I2C, SPI, SDIO, eMMC, USB, SD card and etc.) into a single chip. It is designed for industrial control.
SP7021 consists of two chips (dies) in a package. One is called C-chip (computing chip). It is a 4-core ARM Cortex A7 CPU. It adopts high-level process (22 nm) for high performance computing. The other is called P- chip (peripheral chip). It has many peripherals and an ARM A926 added especially for real-time control. P-chip is made for customers. It adopts low-level process (ex: 0.11 um) to reduce cost.
Refer to (for documentations): https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
Refer to (applications): https://tibbo.com/store/plus1.html
Refer to (applications): http://www.sinovoip.com.cn/ecp_view.asp?id=586"
I left out the clock controller driver, which is still not fully reviewed. There have been 20 revisions of the platform code, and everything else looks good enough, so I hope it's we can simplify the process by separating it out again.
Link: https://lore.kernel.org/linux-arm-kernel/0c10fa4ccf3da5d92784b9bbd4177d1d2f1d62a0.1656396767.git.qinjian@cqplus1.com/
* sunplus/newsoc: ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig ARM: sunplus: Add initial support for Sunplus SP7021 SoC irqchip: Add Sunplus SP7021 interrupt controller driver dt-bindings: interrupt-controller: Add bindings for SP7021 interrupt controller dt-bindings: clock: Add bindings for SP7021 clock driver reset: Add Sunplus SP7021 reset driver dt-bindings: reset: Add bindings for SP7021 reset driver dt-bindings: arm: sunplus: Add bindings for Sunplus SP7021 SoC boards
show more ...
|
#
45598fd4 |
| 13-Jul-2022 |
Christian Brauner <brauner@kernel.org> |
Merge tag 'ovl-fixes-5.19-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into fs.idmapped.overlay.acl
Bring in Miklos' tree which contains the temporary fix for POSIX ACLs w
Merge tag 'ovl-fixes-5.19-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into fs.idmapped.overlay.acl
Bring in Miklos' tree which contains the temporary fix for POSIX ACLs with overlayfs on top of idmapped layers. We will add a proper fix on top of it and then revert the temporary fix.
Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
show more ...
|
#
3476ccbd |
| 14-Jul-2022 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'arm-soc/for-5.20/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates for 5.20, please pull the following
Merge tag 'arm-soc/for-5.20/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates for 5.20, please pull the following:
- Stefan drops the unnecessary "#address-cells" and "#size-cells" properties from the DPI node of BCM283x
- Anand documents and adds support for the 63178 and 6858 SoCs
- William migrates the 63138 platform over to ARCH_BCMBCA and ensures that it is documented within the BCMBCA Device Tree binding documents. He updates the 47622 DTS to remove unnecessary PSCI properties, fix the GIC nodes and some minor cosmetic changes. He finally adds support for the 63158, 4912, 6846, 6855, 6756, 63146, 6856, 63148, 6813, 6318 SoCs.
- Peter, Nicolas and Stefan adds the necessary Device Tree nodes to the BCM2711 (Raspberry Pi 4) DTS to enable the use of the V3D GPU on these platforms.
- Christian adds support for the BCM53015 based Cisco Meraki MR26 Wi-Fi access point.
- Krzysztof updates the Broadcom platforms DTS to add a missing whitespace between the property name and its value.
* tag 'arm-soc/for-5.20/devicetree' of https://github.com/Broadcom/stblinux: (35 commits) ARM: dts: Add BCM63138 generic board dts ARM: dts: update dts files for bcmbca SoC BCM63138 ARM: dts: Move BCM963138DVT board dts to ARCH_BCMBCA dt-bindings: arm: add BCM63138 SoC ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711 dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema ARM: dts: BCM5301X: Add DT for Meraki MR26 dt-bindings: ARM: add bindings for the Meraki MR26 dt-bindings: arm64: Add BCM6813 SoC ARM: dts: Add DTS files for bcmbca SoC BCM63148 dt-bindings: arm: Add BCM63148 SoC dt-bindings: arm64: Add BCM6856 SoC dt-bindings: arm64: Add BCM63146 SoC ARM: dts: broadcom: correct gpio-keys properties ARM: dts: broadcom: align gpio-key node names with dtschema ARM: dts: Add DTS files for bcmbca SoC BCM6756 dt-bindings: arm: Add BCM6756 SoC ...
Link: https://lore.kernel.org/r/20220711164451.3542127-4-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
f83d9396 |
| 14-Jul-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-next into drm-misc-next-fixes
Backmerging from drm/drm-next for the final fixes that will go into v5.20.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
#
4de395f2 |
| 13-Jul-2022 |
Maxime Ripard <maxime@cerno.tech> |
Merge drm/drm-next into drm-misc-next
I need to have some vc4 patches merged in -rc4, but drm-misc-next is only at -rc2 for now.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
#
e23a5e14 |
| 13-Jul-2022 |
Dave Airlie <airlied@redhat.com> |
Backmerge tag 'v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Backmerge in rc6 so I can merge msm next easier.
Linux 5.19-rc6
Signed-off-by: Dave Airlie <
Backmerge tag 'v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Backmerge in rc6 so I can merge msm next easier.
Linux 5.19-rc6
Signed-off-by: Dave Airlie <airlied@redhat.com>
show more ...
|
#
dbd68eb5 |
| 11-Jul-2022 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'imx-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree change for 5.20:
- A series from Alexander Stein to fix some i.MX6UL dt_binding_
Merge tag 'imx-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree change for 5.20:
- A series from Alexander Stein to fix some i.MX6UL dt_binding_check warnings. - Replace deprecated 'enable-sdio-wakeup' property with 'wakeup-source' for a couple of boards. - A set of imx7-colibri device tree updates from Marcel Ziswiler to improve devices Display, Touch, Ethernet and SD/MMC, and also adds Toradex Iris carrier board. - A few improvements on imx6qdl-colibri board, correct SGTL5000 MCLK handling, simplify handling of inverted PWM backlight. - A series from Max Krummenacher (and Oleksandr Suvorov) to improve the existing i.MX6 Apalis carrier board device trees and adds a new device tree for the Ixora V1.2 carrier board. - Add USB dual-role switching using extcon for imx7-colibri board. - Add SFP node for TA 2.1 devices for LayerScape SoCs. - Other small and random updates on various boards.
* tag 'imx-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (61 commits) ARM: dts: layerscape: Add SFP node for TA 2.1 devices ARM: dts: imx6qdl-prti6q.dtsi: Add applicable properties to usdhc3 ARM: dts: imx6q-bosch-acc: Replace 'enable-sdio-wakeup' ARM: dts: imx7d-smegw01: Replace 'enable-sdio-wakeup' ARM: dts: imx6q-apalis: Cleanup ARM: dts: imx6q-apalis: backlight pwm: Adapt brightness steps ARM: dts: imx6q-apalis: backlight pwm: Simplify inverted backlight ARM: dts: imx6q-apalis: Add support for Toradex Ixora V1.2 carrier boards ARM: dts: imx6q-apalis: Clean-up sd card support ARM: dts: imx6q-apalis: Add adv7280 video input ARM: dts: imx6q-apalis: Add ov5640 mipi csi camera ARM: dts: imx6q-apalis: Disable stmpe touchscreen ARM: dts: imx6q-apalis: Disable HDMI ARM: dts: imx6q-apalis: Add LVDS panel support ARM: dts: imx6q-apalis: move gpio-keys to SoM dtsi ARM: dts: imx6q-apalis: Move Atmel MXT touch ctrl to SoM dtsi ARM: dts: imx6q-apalis: Move pinmux groups to SoM dtsi ARM: dts: imx6q-apalis: Move parallel rgb interface to SoM dtsi ARM: dts: imx6q-apalis: Command pmic to standby for poweroff ARM: dts: imx6q-apalis: Add gpio-line-names ...
Link: https://lore.kernel.org/r/20220709082951.15123-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
39c1b1af |
| 11-Jul-2022 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Merge 5.19-rc6 into staging-next
We need the staging driver fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
daf7c850 |
| 07-Jul-2022 |
William Zhang <william.zhang@broadcom.com> |
ARM: dts: Add BCM63138 generic board dts
Add generic bcm963138.dts file.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
#
d39f3f4d |
| 07-Jul-2022 |
William Zhang <william.zhang@broadcom.com> |
ARM: dts: Move BCM963138DVT board dts to ARCH_BCMBCA
Use CONFIG_ARCH_BCMBCA to build all the BCMBCA SoC dts and remove CONFIG_ARCH_BCM_63XX from the makefile
Signed-off-by: William Zhang <william.z
ARM: dts: Move BCM963138DVT board dts to ARCH_BCMBCA
Use CONFIG_ARCH_BCMBCA to build all the BCMBCA SoC dts and remove CONFIG_ARCH_BCM_63XX from the makefile
Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
show more ...
|
#
a63f7778 |
| 08-Jul-2022 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.19-rc5' into next
Merge with mainline to bring up the latest definition from MFD subsystem needed for Mediatek keypad driver.
|
#
f6639994 |
| 28-Jun-2022 |
Qin Jian <qinjian@cqplus1.com> |
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
Add the basic support for Sunplus SP7021-Demo-V3 board.
Signed-off-by: Qin Jian <qinjian@cqplus1.com> Acked-by: Krzysztof Kozlowski <krzysztof
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
Add the basic support for Sunplus SP7021-Demo-V3 board.
Signed-off-by: Qin Jian <qinjian@cqplus1.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
888c173e |
| 06-Jul-2022 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'stm32-dt-for-v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v5.20, round 1
Highlights: ----------
- MCU: -Fix whitespace coding style
Merge tag 'stm32-dt-for-v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v5.20, round 1
Highlights: ----------
- MCU: -Fix whitespace coding style. No functional changes.
- MPU: - General: - Remove specific IPCC wakeup interrupt on STM32MP15. - Enable OPTEE firmware and scmi support (clock/reset) on STM32MP13. It allows to enable RCC clock driver. - Add new pins configurations groups.
- DH boards: - Add DHCOR based DRC Compact board. It embeds: 2xETH, 1xCAN, uSD, USB, eMMC and SDIO wifi. - Add ST MIPID02 bindings to AV96 (not enabled by default)
- OSD32: - Correct vcc-supply for eeprom. - fix missing internally connected voltage regulator (ldo3 supplied by vdd_ddr).
* tag 'stm32-dt-for-v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (25 commits) ARM: dts: stm32: Add ST MIPID02 bindings to AV96 ARM: dts: stm32: Add alternate pinmux for RCC pin ARM: dts: stm32: Add alternate pinmux for DCMI pins ARM: dts: stm32: Add DHCOR based DRC Compact board ARM: dts: stm32: Add alternate pinmux for UART5 pins ARM: dts: stm32: Add alternate pinmux for UART4 pins ARM: dts: stm32: Add alternate pinmux for UART3 pins ARM: dts: stm32: Add alternate pinmux for SPI2 pins ARM: dts: stm32: Add alternate pinmux for CAN1 pins dt-bindings: arm: stm32: Add compatible string for DH electronics DHCOR DRC Compact ARM: dts: stm32: Fix SPI2 pinmux pin comments on stm32mp15 ARM: dts: stm32: add optee reserved memory on stm32mp135f-dk ARM: dts: stm32: add RCC on STM32MP13x SoC family ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP13 dt-bindings: rcc: stm32: select the "secure" path for stm32mp13 ARM: dts: stm32: correct vcc-supply for eeprom on stm32mp15xx-osd32 ARM: dts: stm32: fix missing internally connected voltage regulator for OSD32MP1 ARM: dts: stm32: adjust whitespace around '=' on MCU boards ARM: dts: stm32: Move DHCOR BUCK3 VDD 2V9 adjustment to 1V8 DTSI ARM: dts: stm32: remove the IPCC "wakeup" IRQ on stm32mp151 ...
Link: https://lore.kernel.org/r/a250f32b-f67c-2922-0748-e39dc791e95c@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
49c66eb3 |
| 26-Jun-2022 |
Marek Vasut <marex@denx.de> |
ARM: dts: stm32: Add DHCOR based DRC Compact board
Add DT for DH DRC Compact unit, which is a universal controller device. The system has two ethernet ports, one CAN, RS485 and RS232, USB, uSD card
ARM: dts: stm32: Add DHCOR based DRC Compact board
Add DT for DH DRC Compact unit, which is a universal controller device. The system has two ethernet ports, one CAN, RS485 and RS232, USB, uSD card slot, eMMC and SDIO Wi-Fi.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
show more ...
|
#
dd84cfff |
| 04-Jul-2022 |
Takashi Iwai <tiwai@suse.de> |
Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
A collection of fixes for v5.19, quite large but nothing major -
Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
A collection of fixes for v5.19, quite large but nothing major - a good chunk of it is more stuff that was identified by mixer-test regarding event generation.
show more ...
|
#
3966af40 |
| 01-Jul-2022 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'socfpga_dts_updates_for_v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA dts updates for v5.20 - Clean up the Mercury++ AA1 dts - Add support the
Merge tag 'socfpga_dts_updates_for_v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA dts updates for v5.20 - Clean up the Mercury++ AA1 dts - Add support the Google Chameleon v3 board - Add defined GIC interrupt type for Agilex ECC - Fix coding style around Stratix10 QSPI dts entry - Add support for Stratix10 SW Virtual platform - Move clocks entry out of the Stratix10 soc node
* tag 'socfpga_dts_updates_for_v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: altera: socfpga_stratix10: move clocks out of soc node arm64: dts: Add support for Stratix 10 Software Virtual Platform dt-bindings: altera: document Stratix 10 SWVP compatibles arm64: dts: altera: adjust whitespace around '=' arm64: dts: intel: socfpga_agilex: use defined GIC interrupt type for ECC dt-bindings: altera: Add Chameleon v3 board ARM: dts: socfpga: Add Google Chameleon v3 devicetree ARM: dts: socfpga: Add atsha204a node to Mercury+ AA1 dts ARM: dts: socfpga: Move sdmmc-ecc node to Arria 10 dts ARM: dts: socfpga: Change Mercury+ AA1 dts to dtsi
Link: https://lore.kernel.org/r/20220626004437.1224820-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|