ARM: dts: Add am335x-pocketbeagle

PocketBeagle is an ultra-tiny-yet-complete open-source USB-key-fob computer.

This board family can be indentified by the A335PBGL in the at24 eeprom:
A2: [aa 55 33

ARM: dts: Add am335x-pocketbeagle

PocketBeagle is an ultra-tiny-yet-complete open-source USB-key-fob computer.

This board family can be indentified by the A335PBGL in the at24 eeprom:
A2: [aa 55 33 ee 41 33 33 35 50 42 47 4c 30 30 41 32 |.U3.A335PBGL00A2|]

http://beagleboard.org/pocket
https://github.com/beagleboard/pocketbeagle

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
CC: Tony Lindgren <tony@atomide.com>
CC: Jason Kridner <jkridner@beagleboard.org>
CC: Drew Fustini <drew@beagleboard.org>
CC: Peter Robinson <pbrobinson@redhat.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

ARM: dts: sun8i: h2+: Add Libre Computer Board ALL-H3-CC H2+ ver.

This patch adds a device tree file for the H2+ version of the Libre
Computer Board ALL-H3-CC. It is the same board first introduced

ARM: dts: sun8i: h2+: Add Libre Computer Board ALL-H3-CC H2+ ver.

This patch adds a device tree file for the H2+ version of the Libre
Computer Board ALL-H3-CC. It is the same board first introduced in
commit 6ca358645d4d ("ARM: dts: sun8i: h3: Add dts file for Libre
Computer Board ALL-H3-CC H3 ver."), with the H3 SoC replaced with
the H2+ SoC, and has only two 2Gb DDR3 chips instead of four.

The device tree utilizes the common board design file for ALL-H3-CC,
providing just the model strings and SoC specifics.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

show more ...

ARM: dts: sun8i: h2-plus: Sort dtb entries in Makefile

The dtb entry for the Banana Pi M2 Zero in the device tree makefile
somehow ended up in between two Orange Pi boards.

Move it so the list is p

ARM: dts: sun8i: h2-plus: Sort dtb entries in Makefile

The dtb entry for the Banana Pi M2 Zero in the device tree makefile
somehow ended up in between two Orange Pi boards.

Move it so the list is properly sorted.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

show more ...

ARM: dts: nes: add Nintendo NES/SuperNES Classic Edition support

The Nintendo NES/SuperNES features an R16 already well supported in
mainline.

The console over UART0 may be wired on two ports of th

ARM: dts: nes: add Nintendo NES/SuperNES Classic Edition support

The Nintendo NES/SuperNES features an R16 already well supported in
mainline.

The console over UART0 may be wired on two ports of the R16, both
available on the NES Classic PCB.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

show more ...

Merge tag 'v4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.17-rc2

ARM: dts: bcm2837: Add Raspberry Pi 3 B+

The Raspberry Pi 3 B+ has the following major differences compared
to the model 3 B:
* Microchip LAN7515 (Gigabit Ethernet with integrated USB 2.0 HUB)
* Cyp

ARM: dts: bcm2837: Add Raspberry Pi 3 B+

The Raspberry Pi 3 B+ has the following major differences compared
to the model 3 B:
* Microchip LAN7515 (Gigabit Ethernet with integrated USB 2.0 HUB)
* Cypress CYW43455 (802.11n/ac and BT 4.2)

We need to add the USB LAN chip so the bootloader can add the MAC address.
This is necessary because there ain't an EEPROM or a valid OTP.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>

show more ...

Merge tag 'v4.17-rc2' into next-general

Sync to Linux 4.17-rc2 for developers.

ARM: dts: tpc: Device tree description of the iMX6Q TPC board

This commit adds device tree description of Kieback & Peter GmbH
iMX6Q TPC board.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Review

ARM: dts: tpc: Device tree description of the iMX6Q TPC board

This commit adds device tree description of Kieback & Peter GmbH
iMX6Q TPC board.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: imx6q: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support

i.CoreM6 1.5 is an another i.CoreM6 QDL cpu modules which can be connected
to EDIMM starter kit design with eMMC and MIPI

ARM: dts: imx6q: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support

i.CoreM6 1.5 is an another i.CoreM6 QDL cpu modules which can be connected
to EDIMM starter kit design with eMMC and MIPI-CSI interfaces suitable for
Android and video capture application.

notable features:
CPU NXP i.MX6 S/DL/D/Q, Up to 4 x Cortex-A9@800MHz
Memory Up to 2 GB DDR3-1066
Video Interfaces Up to 1 Parallel Up to 2 LVDS HDMI 1.4
port 8 bit CSI INPUT MIPI-CSI INPUT
1 x 10/100 Ethernet interface, 2 x USB, 1 x PCIe, 1 x I2S etc

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

Back merge 'drm-intel-fixes' into gvt-fixes

Need for 4.17-rc1

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2

Add support for the DH i.MX6 Quad based SoM and a PDK2 evaluation board.
The evaluation board features three serial ports, USB OTG, USB h

ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2

Add support for the DH i.MX6 Quad based SoM and a PDK2 evaluation board.
The evaluation board features three serial ports, USB OTG, USB host with
an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, mSATA, analog audio,
PCIe and HDMI video output.

All of the aforementioned features are supported by this patch.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: iwg23s-sbc: Add support for iWave G23S-SBC based on RZ/G1C

Add support for iWave iW-RainboW-G23S single board computer based on
RZ/G1C.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>

ARM: dts: iwg23s-sbc: Add support for iWave G23S-SBC based on RZ/G1C

Add support for iWave iW-RainboW-G23S single board computer based on
RZ/G1C.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

ARM: dts: i.MX6: Add BTicino i.MX6DL Mamoj initial support

This patch adds initial support for BTicino i.MX6DL Mamoj board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Sim

ARM: dts: i.MX6: Add BTicino i.MX6DL Mamoj initial support

This patch adds initial support for BTicino i.MX6DL Mamoj board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Arnd Bergmann:
"This is the usual set of changes for device trees, with over

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Arnd Bergmann:
"This is the usual set of changes for device trees, with over 700
non-merged changesets. There is an ongoing set of dtc warning fixes
and the usual bugfixes, cleanups and added device support.

The most interesting bit as usual is support for new machines listed
below:

- The Allwinner H6 makes its debut with the Pine-H64 board, and we
get two new machines based on its older siblings: the H5 based
OrangePi Zero+ and the A64 based Teres-I Laptop from Olimex. On the
32-bit side, we add The Olimex som204 based on Allwinner A20, and
the Banana Pi M2 Zero development board (based on H2).

- NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972
development board and p2888 CPU module.

- The Nuvoton npcm750 is a BMC that was newly added, for now we only
support running on the evaluation board.

- STmicroelectronics stm32 gains support for the stm32mp157c and two
evaluation boards.

- The Toradex Colibri board family grows a few members based on the
i.MX6ULL variant.

- The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6 family
of chips.

- The Phytec phyBOARD Mira is a family of industrial boards based on
i.MX6. For now, four models get added.

- TI am335x based PDU-001 is an industrial embedded machine used for
traffic monitoring

- The Aspeed platform now supports running on the BMC on the Qualcomm
Centriq 2400 server

- Samsung Exynos4 based Galaxy S3 is a family of mobile phones
Qualcomm msm8974 based Galaxy S5 is a rather different phone made
by the same company.

- The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file
for the various boards made by Xilinx themselves, as well as the
Digilent Zybo Z7.

- The ARM Versatile family now supports the "IB2" interface board.

- The Renesas H2 based "Stout" and the H3 based Salvator-X are more
evaluation boards named after a kind of beer, as most of them are.
The r8a77980 (V3H) based "Condor" apparently doesn't follow that
tradition. ;-)

- ROC-RK3328-CC is a simple developement board from the Libre
Computer Project, based on the Rockchips RK3328 SoC

- Haiku is another development board plus Qseven module based on
Rockchips RK3368 and made by Theobroma Systems"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (701 commits)
arm: dts: modify Nuvoton NPCM7xx device tree structure
arm: dts: modify Makefile NPCM750 configuration name
arm: dts: modify clock binding in NPCM750 device tree
arm: dts: modify timer register size in NPCM750 device tree
arm: dts: modify UART compatible name in NPCM750 device tree
arm: dts: add watchdog device to NPCM750 device tree
arm64: dts: uniphier: add ethernet node for PXs3
ARM: dts: uniphier: add pinctrl groups of ethernet for second instance
arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+
arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT
arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0
arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier
arm: dts: armada-385-db-ap: use SPDX-License-Identifier
arm: dts: armada-388-rd: use SPDX-License-Identifier
arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier
arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier
arm: dts: armada-370-db: use SPDX-License-Identifier
arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board
arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs
arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs
...

show more ...

arm: dts: modify Makefile NPCM750 configuration name

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge branch 'next' into for-linus

Prepare input updates for 4.17 merge window.

Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Pull "Allwinner H3/H5 changes for 4.17" from Maxime Ripard:

Here is our usual bunch o

Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Pull "Allwinner H3/H5 changes for 4.17" from Maxime Ripard:

Here is our usual bunch of changes to the common DTSI shared between arm
and arm64, and their associated device trees.

Even though the diffstat is quite big, it's been mostly just cleanups. The
big feature is that the HDMI is now suported on H3 and H5 boards.

* tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: H5: Add Xunlong Orange Pi Zero Plus
ARM: dts: sun8i-h3: Add Mali node
ARM64: dts: sun50i: h5: Enable HDMI output on H5 boards
ARM: dts: sun8i: h3: Enable HDMI output on H3 boards
ARM: dts: sunxi: h3/h5: Add HDMI pipeline
ARM: dts: sun8i: h2-plus: remove unnecessary mmc1_pins node
ARM: dts: sunxi: h3-h5: rename mmc0_pins_a and mmc1_pins_a
ARM: dts: sunxi: h3-h5: Move pinctrl of mmc1 from dts to dtsi
ARM: dts: sunxi: h3-h5: Move pinctrl of mmc0 from dts to dtsi
ARM: dts: sunxi: h3-h5: remove mmc0 card detection pin from pinctrl
ARM: dts: sun8i: h2+: add support for Banana Pi M2 Zero board
ARM: dts: sunxi: Switch MMC nodes away from cd-inverted property
ARM: dts: nanopi-neo-air: Add WiFi / eMMC

show more ...

Merge tag 'sunxi-dt-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Pull "Allwinner DT changes for 4.17" from Maxime Ripard:

There is a bunch of significant

Merge tag 'sunxi-dt-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Pull "Allwinner DT changes for 4.17" from Maxime Ripard:

There is a bunch of significant additions for this release cycle:
- The A83t now has HDMI support
- The A80 finally has SMP support (without PSCI, unfortunately)
- The A80 has preliminary display support

And also:
- a number of boards based on old (A10, A20) SoCs now have the HDMI
support enabled.
- The display frontend is enabled on the A33, allowing to use it for
hardware display scaling
- New boards: Olimex A20-SOM204 variants

* tag 'sunxi-dt-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (39 commits)
ARM: dts: sun9i: cubieboard4: Enable VGA display output
ARM: dts: sun9i: Add pinmux settings for LCD0 RGB888 output.
ARM: dts: sun9i: Add device nodes for documented display pipelines for A80
ARM: dts: sun8i: reference tablet design: Enable PMIC power supplies
ARM: dts: sun8i: a33: Enable A33 internal audio codec on A33-OLinuXino
ARM: dts: sun8i: a33: Enable PMIC power supplies on A33-OLinuXino
ARM: dts: sun8i: a33: Drop sunxi-common-regulators.dtsi for A33-OLinuXino
ARM: dts: sun8i: a33: Drop GPIO pinmux settings for A33-OLinuXino
ARM: dts: sun9i: Add enable-method for SMP support for the A80 SoC
ARM: dts: sun8i: h3: Add eMMC for NanoPi M1 Plus
ARM: dts: sun8i: a711: set regulator for each cluster of CPUs
ARM: dts: sun8i: a83t: add stable OPP tables and CPUfreq
ARM: dts: sun8i: a83t: add cpu0 and cpu100 labels
ARM: dtsi: axp81x: remove IP name from DT node name
ARM: dtsi: sun8i: a711: enable battery power supply subnode
ARM: dtsi: axp81x: add battery power supply subnode
ARM: dtsi: axp81x: add node for ADC
ARM: dtsi: axp22x: add node for ADC
ARM: dtsi: axp209: add node for ADC
ARM: dts: sun7i: Enable HDMI support on the Orange Pi mini
...

show more ...

Merge tag 'qcom-dts-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Pull "Qualcomm Device Tree Changes for v4.17" from Andy Gross:

* Add initial DTS file f

Merge tag 'qcom-dts-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Pull "Qualcomm Device Tree Changes for v4.17" from Andy Gross:

* Add initial DTS file for Samsung Galaxy S5
* Fixups for castor touchscreen node
* Fixup QS600 at23 manufacturer
* Add XOADC and IIO to APQ8064

* tag 'qcom-dts-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: msm8974: castor: Fix typo and add startup delay in touchscreen node
ARM: dts: add XOADC and IIO HWMON to APQ8064
ARM: dts: use 'atmel' as at24 manufacturer for qcom-apq8064-cm-qs600
ARM: dts: qcom: Add initial DTS file for Samsung Galaxy S5 phone

show more ...

Merge tag 'armsoc-versatile-drm-dts' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt

Pull "DTS changes for RealView+Versatile" from Linus Walleij:

This au

Merge tag 'armsoc-versatile-drm-dts' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt

Pull "DTS changes for RealView+Versatile" from Linus Walleij:

This augments the RealView and Versatile device trees to properly
define the VGA and panel connectors in preparation for DRM.

* tag 'armsoc-versatile-drm-dts' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: Augment panel setting for Versatile
ARM: dts: Add Versatile IB2 device tree
ARM: dts: Augment VGA connector bridge on Realview PBX
ARM: dts: Augment VGA connector bridge on Realview EB
ARM: dts: Augment VGA connector bridge on PB1176
ARM: dts: Augment VGA connector bridge on PB11MPcore

show more ...

Merge tag 'renesas-dt-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Renesas ARM Based SoC DT Updates for v4.17" from Simon Horman:

* Silk board w

Merge tag 'renesas-dt-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Renesas ARM Based SoC DT Updates for v4.17" from Simon Horman:

* Silk board with R-Car E2 (r8a7794) SoC
- Add r1ex24002 EEPROM to DT

Magnus Damm says "Extend the Silk board support to include U14 which is
an I2C based EEPROM hooked up to the I2C1 bus."

- Add GPIO keys to DT

Magnus Damm says "Extend the Silk board support to include SW3, SW4,
SW6 and SW12. They are all connected via GPIO lines and handled by the
gpio-keys driver"

* Marzen board with R-Car H1 (r7a7779) SoC
- Add SDHI0 VCCQ Regulator

Magnus Damm says "Add support for the on-board voltage regulator hooked
up to GPIO3_20 on r8a7779 Marzen. The board schematics describes the
regulator as U4 TPS2110A. Input wise, U4 has D0 fixed to ground, D1
tied to GPIO3_20 while IN1 is fixed to 3.3V and IN2 is fixed to 1.8V.
OUT goes to the pull-ups for the data pins of SDHI0."

* Porter board with R-Car M3W (r8a7791) SoC
- Fix HDMI output routing

Laurent Pinchart says "The HDMI encoder is connected to the RGB output
of the DU, which is port@0, not port@1."

* iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) and
iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
- Enable cmt0

* Stout board with R-Car H2 (r8a7790) SoC
- Initial support

* Lager board with R-Car H2 (r8a7790) SoC
- Add CEC clock for HDMI transmitter

Niklas Söderlund says "The adv7511 on the Lager board has a 12 MHz
fixed clock for the CEC block. Specify this in the dts to enable CEC
support."

- Move cec_clock to root node

By definition nodes without a bus address do not belong on the bus

* kzm9d board with EMMA Mobile EV2 (EMEV2) SoC
- Fix "debounce-interval" property misspelling

* RZ/G1M (r8a7743) and RZ/G1H (r8a7745) SoCs
- Add IPMMU DT nodes
- Add VSP support

* R-Car Gen2 boards
- Use I2C demuxer for

This allows run-time switching between alternate I2C IP blocks

* R-Car Gen2 and RZ/G1 SoCs
- Clean up DT files to ease future maintenance
+ add soc node for IP attached to the bus
+ sort subnodes of soc and root node
+ consistently use single space after =

* R-Car H2 (r8a7790), M3-W (r8a7791) and M3-N (r7a7793) SoCs
- Reduce size of thermal registers

According to the "User's Manual: Hardware" v2.00 the registers at base
0xe61f0000 extend to an offset of 0x10, rather than 0x14 which is the
case on the r8a73a4 (R-Mobile APE6).

This should not have any runtime affect as mapping granularity is
PAGE_SIZE.

* tag 'renesas-dt-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (47 commits)
ARM: dts: silk: Add GPIO keys to DT
ARM: dts: silk: Add r1ex24002 EEPROM to DT
ARM: dts: marzen: Add SDHI0 VCCQ Regulator
ARM: dts: stout: Initial r8a7790 Stout board support
ARM: dts: lager: Move cec_clock to root node
ARM: dts: kzm9d: Fix "debounce-interval" property misspelling
ARM: dts: gose: use demuxer for I2C4
ARM: dts: gose: use demuxer for I2C2
ARM: dts: silk: use demuxer for I2C1
ARM: dts: alt: use demuxer for I2C1
ARM: dts: porter: use demuxer for I2C2
ARM: dts: koelsch: use demuxer for I2C4
ARM: dts: koelsch: use demuxer for I2C2
ARM: dts: lager: use demuxer for IIC3/I2C3
ARM: dts: lager: use demuxer for IIC2/I2C2
ARM: dts: r8a7745: Add VSP support
ARM: dts: r8a7743: Add VSP support
ARM: dts: r8a7745: Add IPMMU DT nodes
ARM: dts: r8a7743: Add IPMMU DT nodes
ARM: dts: r8a7745: sort subnodes of soc node
...

show more ...

Merge tag 'tegra-for-4.17-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

Pull "ARM: tegra: Device tree changes for v4.17-rc1" from Thierry Reding:

Support fo

Merge tag 'tegra-for-4.17-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

Pull "ARM: tegra: Device tree changes for v4.17-rc1" from Thierry Reding:

Support for the VDE is added on Tegra30 along with some general cleanup
and some improvements to the various Toradex boards.

* tag 'tegra-for-4.17-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: apalis-tk1: Support v1.2 hardware revision
ARM: tegra: apalis-tk1: Copyright period, spurious newlines
ARM: tegra: apalis-tk1: Hog group for ethernet, PCIe, reset GPIOs
ARM: tegra: apalis-tk1: Add missing as3722 gpio0 configuration
ARM: tegra: apalis-tk1: Activate PWM pin muxing for pwm3
ARM: tegra: apalis-tk1: Set critical trips
ARM: tegra: apalis/colibri: Remove unneeded reg property
ARM: tegra: apalis/colibri: Use correct compatible for RTC
ARM: tegra: Fix I2C bus frequencies on Apalis/Colibri
ARM: tegra: venice2: Remove duplicate pcie-1 node
ARM: tegra: beaver: Remove invalid uses of rsvd1
ARM: tegra: Use proper IRQ type definitions
ARM: tegra: Fix ULPI regression on Tegra20
ARM: tegra: Add unit address to VDE IRAM area
ARM: tegra: Add video decoder node on Tegra30
ARM: tegra: Add IRAM node on Tegra30

show more ...

ARM: dts: Add Versatile IB2 device tree

The Versatile board can be equipped with a interface board
just named "IB2". This was created in the early 2000s for
prototyping GSM candybar phone form facto

ARM: dts: Add Versatile IB2 device tree

The Versatile board can be equipped with a interface board
just named "IB2". This was created in the early 2000s for
prototyping GSM candybar phone form factor products.

The IB2 board contains:
- Cascaded interrupt controller
- Enfora Enabler GSM0308 quad-band module with antenna and
separate audio jack
- Keypad with joystick
- Sanyo 2.5" color display
- A 28-pin connector for mounting a camera

This adds a DTS file for the combination of the Versatile AB
with an IB2 daughterboard mounted, making the LED blink and
making the system controller available for drivers, such as
the panel driver.

The device tree bindings already exist in
Documentation/devicetree/bindings/arm/arm-boards.

Cc: Mali DP Maintainers <malidp@foss.arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

ARM: dts: stout: Initial r8a7790 Stout board support

Stout base board support making use of 1 GiB of memory,
the Renesas H2 r8a7790 SoC with the SCIFA0 serial port
and CA15 with ARM architected time

ARM: dts: stout: Initial r8a7790 Stout board support

Stout base board support making use of 1 GiB of memory,
the Renesas H2 r8a7790 SoC with the SCIFA0 serial port
and CA15 with ARM architected timer.

Furthermore, this device tree contains entries for:
- 4x LEDs
- SDHI SD/MMC controller
- Display unit with HDMI output
- SH fast ethernet controller
- QSPI controller with S25FL512S attached to it
- I2C controller with DA9210 and DA 9063 PMICs

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge tag 'imx-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Pull "i.MX device tree updates for 4.17" from Shawn Guo:

- New board support: phyBOARD-Mir

Merge tag 'imx-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Pull "i.MX device tree updates for 4.17" from Shawn Guo:

- New board support: phyBOARD-Mira i.MX6 boards; Advantech DMS-BA16
i.MX6Q board; Toradex Colibri iMX6ULL boards.
- ZII RDU board updates: add RAVE SP device; disable on-chip watchdog
as the external watchdog is being used instead; improve USDHC node
regarding to voltage and SDIO capability.
- i.MX6UL/ULL updates: cpufreq clock cleanup; add IOMUXC_SNVS pins and
missing daisy chain configurations; add more devices like WDOG3,
UART8, PMU, architected timer etc.
- Hummingboard updates: correct USBOTG-ID pin; remove mention of
nonexistent node.
- Fix compatibles of atmel eeprom devices.
- A couple of improvements on i.MX25 pinfunc header regarding to eSDHC
pins.
- A bunch of patches from Fabio and Marco to fix DTC warnings seen with
W=1 switch.
- Remove GPU subsystem nodes, as they are not needed by the etnaviv
driver anymore and have been removed from the binding.
- Add FIFO depth definition for i.MX25 SSI devices.
- Add missing '#sound-dai-cells' for sgtl5000 codec which is complained
by DTC.
- Miscellaneous and random updates.

* tag 'imx-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (66 commits)
ARM: dts: i.MX25: define SSI FIFO depth
ARM: dts: vf610m4: Remove the zero length reg property
ARM: dts: vf610m4: Remove skeleton.dtsi inclusion
ARM: dts: vf500: Remove the zero length reg property
ARM: dts: vf: Add memory node unit name
ARM: dts: vf500: Remove skeleton.dtsi inclusion
ARM: dts: imx7s: add temperature monitor support
ARM: dts: imx: Add missing #sound-dai-cells for sgtl5000 codec
ARM: dts: imx51-zii-rdu1: Add node for RAVE SP device
ARM: dts: imx6: RDU2: Add RAVE SP device
ARM: dts: imx5: Pass the memory unit-address
ARM: dts: imx7s: add spba-bus abstraction
ARM: dts: imx6dl-icore-rqs: Fix invalid PHY address assignment for ethernet
ARM: dts: imx6ul: add wdog3 node
ARM: dts: imx7: add CPU PMU support
ARM: dts: imx6dl-colibri-eval-v3: Add chosen node
ARM: dts: imx6: Pass memory unit-adress
ARM: dts: imx6dl: remove 'lcdif' node
ARM: dts: hummingboard: Remove mention of nonexistent node
ARM: dts: imx6qdl-hummingboard: fix USBOTG-ID pin
...

show more ...