Merge tag 'imx-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX arm device tree update for 6.2:

- New device tree for Kobo Aura 2 E-Boot reader which is buil

Merge tag 'imx-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX arm device tree update for 6.2:

- New device tree for Kobo Aura 2 E-Boot reader which is built on i.MX6SL
SoC.
- Enable backlight and boost support for imx6sl-tolino-shine2hd.
- Enable CYTTSP5 touchscreen support for E60K02.
- Enable Silergy SY7636A EPD PMIC on imx7d-remarkable2 epaper tablet.
- Add watchdog property 'fsl,suspend-in-wait' for i.MX6UL Phytec Phycore
SoM to avoid watchdog triggering in 'freeze' low power mode.
- Correct the polarity of AT86RF233 reset line for vf610-zii-dev-rev-c
board.
- A bunch of Colibri device tree updates from Marcel Ziswiler and Philippe
Schenker, correct USBH_PEN property, remove spurious debounce property,
add USB dual-role switching, and some cosmetic change.
- Other small and random changes.

* tag 'imx-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: colibri-imx6ull: Enable dual-role switching
ARM: dts: imx: e60k02: Add touchscreen
ARM: dts: imx6qdl-sabre: Add mmc aliases
ARM: dts: imx6ul/ull: suspend i.MX6UL watchdog in wait mode
ARM: dts: imx7d-remarkable2: Enable silergy,sy7636a
ARM: dts: imx6sl-tolino-shine2hd: Add backlight boost
ARM: dts: imx6sl-tolino-shine2hd: Add backlight
ARM: dts: colibri-imx7: fix confusing naming
ARM: dts: colibri-imx6ull: add -hog to gpio hogs
ARM: dts: colibri-imx6ull: enable default peripherals
ARM: dts: colibri-imx6ull: keep peripherals disabled
ARM: dts: ls1021: correct indentation
ARM: dts: vf610-zii-dev-rev-c: fix polarity of at86rf233 reset line
ARM: dts: imx7-colibri: remove spurious debounce property
ARM: dts: colibri-imx6: specify usbh_pen gpio being active-low
ARM: dts: colibri-imx6: move vbus-supply to module level device tree
ARM: dts: colibri-imx6: usb dual-role switching
ARM: dts: imx: Add devicetree for Kobo Aura 2

Link: https://lore.kernel.org/r/20221119125733.32719-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: dts: uniphier: Add Pro5 board support

Initial version of devicetree sources for Pro5 EPCORE and ProEX boards.
These boards have UART, I2C, USB, eMMC and PCI endpoint in common.

Pro5 EPCORE boa

ARM: dts: uniphier: Add Pro5 board support

Initial version of devicetree sources for Pro5 EPCORE and ProEX boards.
These boards have UART, I2C, USB, eMMC and PCI endpoint in common.

Pro5 EPCORE board is a kind of Pro5 reference board with PCIe endpoint
card edge connector.

ProEX board shares peripherals with Linux and other systems, and some
of these ports are available in Linux.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20221117163219.3673-3-hayashi.kunihiko@socionext.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to update drm-misc-next-fixes for the final phase
of the release cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ARM: dts: aspeed: Add Delta AHE-50DC BMC

This is a 1U Open19 power shelf with six PSUs and 50 12VDC outputs via
LM25066 efuses. It's managed by a pair of AST1250 BMCs in a redundant
active/active c

ARM: dts: aspeed: Add Delta AHE-50DC BMC

This is a 1U Open19 power shelf with six PSUs and 50 12VDC outputs via
LM25066 efuses. It's managed by a pair of AST1250 BMCs in a redundant
active/active configuration using a PCA9541 on each I2C bus to
arbitrate access between the two.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20221108001551.18175-3-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>

show more ...

ARM: dts: aspeed: Remove Mihawk

The platform has been removed from OpenBMC as it is unmaintained.

Link: https://lore.kernel.org/r/20221020224420.635938-1-joel@jms.id.au
Signed-off-by: Joel Stanley

ARM: dts: aspeed: Remove Mihawk

The platform has been removed from OpenBMC as it is unmaintained.

Link: https://lore.kernel.org/r/20221020224420.635938-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>

show more ...

ARM: dts: aspeed: Add IBM Bonnell system BMC devicetree

Add a devicetree for the new Bonnell system.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Jim Wright <wrightj@linux.ibm.co

ARM: dts: aspeed: Add IBM Bonnell system BMC devicetree

Add a devicetree for the new Bonnell system.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Jim Wright <wrightj@linux.ibm.com>
Link: https://lore.kernel.org/r/20220818202422.741275-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>

show more ...

Merge drm/drm-next into drm-intel-next

Catch up on 6.1-rc cycle in order to solve the intel_backlight
conflict on linux-next.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

ARM: dts: bcm47094: Add devicetree for D-Link DIR-890L

This adds a device tree for the D-Link DIR-890L. This device
is very similar to D-Link DIR-885L, the differences are detailed
as a comment in t

ARM: dts: bcm47094: Add devicetree for D-Link DIR-890L

This adds a device tree for the D-Link DIR-890L. This device
is very similar to D-Link DIR-885L, the differences are detailed
as a comment in the DTS file.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221107134104.1422169-2-linus.walleij@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

ARM: dts: bcm53016: Add devicetree for D-Link DWL-8610AP

This adds a device tree for the BCM53016-based D-Link DWL-8610AP
access point wireless router.

The TRX-format partitions had to be named "fi

ARM: dts: bcm53016: Add devicetree for D-Link DWL-8610AP

This adds a device tree for the BCM53016-based D-Link DWL-8610AP
access point wireless router.

The TRX-format partitions had to be named "firmware" due to
an OpenWrt patch that only accepts parting such nodes if they
are named "firmware".

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221019193449.3036010-2-linus.walleij@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

ARM: dts: qcom: Add support for Huawei Watch

Add support for this smartwatch, based on Snapdragon 400 SoC.

Currently supported functionality:
* Internal storage
* USB
* Charger
* Power button
* Blu

ARM: dts: qcom: Add support for Huawei Watch

Add support for this smartwatch, based on Snapdragon 400 SoC.

Currently supported functionality:
* Internal storage
* USB
* Charger
* Power button
* Bluetooth
* Wifi

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924152937.4076-2-luca@z3ntu.xyz

show more ...

Merge drm/drm-next into drm-intel-gt-next

Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator")
which is needed for series https://patchwork.freedesktop.org/s

Merge drm/drm-next into drm-intel-gt-next

Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator")
which is needed for series https://patchwork.freedesktop.org/series/110083/ .

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

ARM: dts: imx: Add devicetree for Kobo Aura 2

This adds a devicetree for the Kobo Aura 2 Ebook reader. It is based
on boards marked with "37NB-E60QL0+4B1". It is equipped with an i.MX6SL
SoC.

Expec

ARM: dts: imx: Add devicetree for Kobo Aura 2

This adds a devicetree for the Kobo Aura 2 Ebook reader. It is based
on boards marked with "37NB-E60QL0+4B1". It is equipped with an i.MX6SL
SoC.

Expected to work:
- Buttons
- Wifi (with external module)
- LED
- uSD
- USB
- RTC
- Fuel Gauge
- Backlight (if the required regulator is probed before the backlight,
specifying a supply is not supported by backlightdriver)

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

Merge branch 'main' into zstd-next

ARM: dts: stm32: Add DHCOR based Testbench board

Add DT for DHCOR Testbench board, which is a testbench for testing of
DHCOR SoM during manufacturing. This is effectively a trimmed down
version of A

ARM: dts: stm32: Add DHCOR based Testbench board

Add DT for DHCOR Testbench board, which is a testbench for testing of
DHCOR SoM during manufacturing. This is effectively a trimmed down
version of AV96 board with CSI-2 bridge, HDMI bridge, WiFi, Audio and
LEDs removed and used as GPIOs instead. Furthermore, the PMIC Buck3
is always configured from PMIC NVM to cater for both 1V8 and 3V3 SoM
variant.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get v6.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: jz4752b: Capture fixes

Merge series from Siarhei Volkau <lis8215@gmail.com>:

The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly repre

ASoC: jz4752b: Capture fixes

Merge series from Siarhei Volkau <lis8215@gmail.com>:

The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly represented dB values in alsamixer, et al.
- incorrect represented Capture input selector in alsamixer
in Playback tab.
- wrong control selected as Capture Master

show more ...

Merge drm/drm-next into drm-misc-next

Let's kick-off this release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 (SM-T530)

Add a device tree for the Samsung Galaxy Tab 4 10.1 (SM-T530) wifi tablet
based on the apq8026 platform.

Currently supported are

ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 (SM-T530)

Add a device tree for the Samsung Galaxy Tab 4 10.1 (SM-T530) wifi tablet
based on the apq8026 platform.

Currently supported are accelerometer sensor, hall sensor,
internal storage, physical buttons (power & volume), screen
(based on simple-framebuffer set up by the bootloader), sdcard,
touchscreen and USB.

Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927214940.244480-4-matti.lehtimaki@gmail.com

show more ...

Merge tag 'v6.1-rc1' into next

Merge with mainline to bring in the latest changes to twl4030 driver.

Merge branch 'master' into mm-hotfixes-stable

Merge branch 'next' into for-linus

Prepare input updates for 6.1 merge window.

Merge tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
"Most of the changes fall into one of three categories: adding suppor

Merge tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
"Most of the changes fall into one of three categories: adding support
for additional devices on existing machines, cleaning up issues found
by the ongoing conversion to machine-readable bindings, and addressing
minor mistakes in the existing DT data.

Across SoC vendors, Qualcomm and Freescale stick out as getting the
most updates, which corresponds to their dominance in the mobile phone
and embedded industrial markets, respectively.

There are 636 non-merge changeset in this branch, which is a little
lower than most times, but more importantly we only add 36 machine
files, which is about half of what we had the past few releases.

Eight new SoCs are added, but all of them are variations of already
supported SoC families, and most of them come with one reference board
design from the SoC vendor:

- Mediatek MT8186 is a Chromebook/Tablet type SoC, similar to the
MT65xx series of phone SoCs, with two Cortex-A76 and six Cortex-A55
cores.

- TI AM62A is another member of the K3 family with Cortex-A53 cores,
this one is targetted at Video/Vision processing for industrial and
automotive applications.

- NXP i.MX8DXL is another chip for this market in the ever-growing
i.MX8 family, this one again with two Cortex-A35 cores.

- Renesas R-Car H3Ne-1.7G (R8A779MB) and R-Car V3H2 (R8A77980A) are
minor updates of R8A77951 and R8A77980, respectively.

- Qualcomm IPQ8064-v2.0, IPQ8062 and IPQ8065 are all variants of the
IPQ8064 chip, with minimally different features.

The AMD Pensando Elba and Apple M1 Ultra SoC support was getting close
this time, but in the end did not make the cut.

The new machines based on existing SoC support are fairly uneventful:

- Sony Xperia 1 IV is a fairly recent phone based on Qualcomm
Snapdragon 8 Gen 1.

- Three Samsung phones based on Snapdragon 410: Galaxy E5, E7 and
Grand Max. These are added for both 32-bit and 64-bit kernels, as
they originally shipped running 32-bit code.

- Two new servers using AST2600 BMCs: AMD DaytonaX and Ampere Mt.
Mitchell

- Three new machines based on Rockchips RK3399 and RK3566: Anberic
RG353P and RG503, Pine64 Pinephone Pro, Open AI Lab

- Multiple NXP i.MX6/i.MX8 based boards: Kontron SL/BL i.MX8MM OSM-S,
i.MX8MM Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board

- Two development boards in the Microchip AT91 family: SAMA5D3-EDS
and lan966x-pcb8290.

- Minor variants of existing boards using Amlogic, Broadcom, Marvell,
Rockchips, Freescale Layerscape and Socionext Uniphier SoCs"

* tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (617 commits)
Revert "ARM: dts: BCM5301X: Add basic PCI controller properties"
ARM: dts: s5pv210: correct double "pins" in pinmux node
ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2
arm64: dts: uniphier: Add L2 cache node
arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node
arm64: dts: uniphier: Fix opp-table node name for LD20
arm64: dts: uniphier: Add USB-device support for PXs3 reference board
arm64: dts: uniphier: Add ahci controller nodes for PXs3
arm64: dts: uniphier: Use GIC interrupt definitions
arm64: dts: uniphier: Rename gpio-hog nodes
arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller
arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller
arm64: dts: uniphier: Rename pvtctl node to thermal-sensor
ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node
ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card
ARM: dts: uniphier: Add ahci controller nodes for PXs2
ARM: dts: uniphier: Add ahci controller nodes for Pro4
ARM: dts: uniphier: Use GIC interrupt definitions
ARM: dts: uniphier: Rename gpio-hog node
...

show more ...

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'for-6.1/nvdimm' into libnvdimm-for-next

Add v6.1 content on top of some straggling updates that missed v6.0.

Merge tag 'aspeed-6.1-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt

ASPEED device tree updates for 6.1

- New machines

* AMD's DaytonaX AST2600 BMC, for the a

Merge tag 'aspeed-6.1-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt

ASPEED device tree updates for 6.1

- New machines

* AMD's DaytonaX AST2600 BMC, for the amd64 server
* Ampre's Mt. Mitchell AST2600 BMC, for the AmpereOne arm64 server

- Fixes and updates for bletchley, mtjade, yosemitev2 and the ast2600-evb

* tag 'aspeed-6.1-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: ast2600-evb-a1: Add compatible
ARM: dts: aspeed: ast2600evb: Fix compatible string
ARM: dts: aspeed: ast2600-evb: Enable Quad SPI RX tranfers
ARM: dts: aspeed-g6: Enable more UART controllers
ARM: dts: aspeed: yosemitev2: Disable the EEPROM driver
ARM: dts: aspeed: Add AMD DaytonaX BMC
dt-bindings: arm: aspeed: document AMD DaytonaX
ARM: dts: aspeed: Yosemite V2: Enable OCP debug card
ARM: dts: aspeed: mtjade: Remove gpio-keys entries
ARM: dts: aspeed: Add device tree for Ampere's Mt. Mitchell BMC
dt-bindings: arm: aspeed: document Ampere Mt.Mitchell BMC compatibles
ARM: dts: aspeed: bletchley: Remove hdc1080 node
ARM: dts: aspeed: bletchley: Add USB debug card IPMB node
ARM: dts: aspeed: ast2600-evb: Update I2C devices

Link: https://lore.kernel.org/r/CACPK8Xepnci+f+7Pi1jtXod8Jmt+OnJYfDRENjiP-xDBQwFCVg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...