#
8284bae7 |
| 06-Sep-2022 |
Daniel Vetter <daniel.vetter@ffwll.ch> |
Merge tag 'drm-misc-next-2022-08-20-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.1:
UAPI Changes:
Cross-subsystem Changes: - DMA-buf: documentation updates.
Merge tag 'drm-misc-next-2022-08-20-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.1:
UAPI Changes:
Cross-subsystem Changes: - DMA-buf: documentation updates. - Assorted small fixes to vga16fb - Fix fbdev drivers to use the aperture helpers. - Make removal of conflicting drivers work correctly without fbdev enabled.
Core Changes: - bridge, scheduler, dp-mst: Assorted small fixes. - Add more format helpers to fourcc, and use it to replace the cpp usage. - Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx ("darkness", inverted single channel) - Add packed AYUV8888 and XYUV8888 formats. - Assorted documentation updates. - Rename ttm_bo_init to ttm_bo_init_validate. - Allow TTM bo's to exist without backing store. - Convert drm selftests to kunit. - Add managed init functions for (panel) bridge, crtc, encoder and connector. - Fix endianness handling in various format conversion helpers. - Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565 - Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so drm_plane_helper is no longer needed in most drivers. - Use idr_init_base instead of idr_init. - Rename FB and GEM CMA helpers to DMA helpers. - Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that takes a iosys_map. Make drm_fb_memcpy take an iosys_map too. - Move edid luminance calculation to core, and use it in i915.
Driver Changes: - bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767}, nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111: Assorted small fixes and doc updates. - vc4: Rework hdmi power up, and depend on PM. - panel/simple: Add Samsung LTL101AL01. - ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property is unchanged, and use the new PM ops. - Revert some amdgpu commits that cause garbaged graphics when starting X, and reapply them with the real problem fixed. - Completely rework vc4 init to use managed helpers. - Rename via_drv to via_dri1, and move all stuff there only used by the dri1 implementation in preperation for atomic modeset. - Use regmap bulk write in ssd130x. - Power sequence and clock updates to it6505. - Split panel-sitrox-st7701 init sequence and rework mode programming code. - virtio: Improve error and edge conditions handling, and convert to use managed helpers. - Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels. - Add generic fbdev support to komeda. - Split mgag200 modeset handling to make it more model-specific. - Convert simpledrm to use atomic helpers. - Improve udl suspend/disconnect handling.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f0c71766-61e8-19b7-763a-5fbcdefc633d@linux.intel.com
show more ...
|
Revision tags: v6.0-rc4, v6.0-rc3, v6.0-rc2, v6.0-rc1, v5.19, v5.19-rc8 |
|
#
30c63715 |
| 20-Jul-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/plane-helper: Export individual helpers
Export the individual plane helpers that make up the plane functions and align the naming with other helpers. The plane helpers are for non-atomic modeset
drm/plane-helper: Export individual helpers
Export the individual plane helpers that make up the plane functions and align the naming with other helpers. The plane helpers are for non-atomic modesetting and exporting them will simplify a later conversion of drivers to atomic modesetting.
With struct drm_plane_funcs removed from drm_plane_helper.h, also remove the include statements. It only needs linux/types.h for uint32_t and a number of forward declarations.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-6-tzimmermann@suse.de
show more ...
|
#
382fc1f6 |
| 20-Jul-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/atomic-helper: Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers
The macro DRM_PLANE_HELPER_NO_SCALING is only useful with the interfaces in drm_atomic_helper.h, but defined in drm_plane_helper
drm/atomic-helper: Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers
The macro DRM_PLANE_HELPER_NO_SCALING is only useful with the interfaces in drm_atomic_helper.h, but defined in drm_plane_helper.h. So half of DRM includes the latter header file for using this macro. Move the macro and remove the include statements.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-3-tzimmermann@suse.de
show more ...
|
Revision tags: v5.19-rc7, v5.19-rc6, v5.19-rc5, v5.19-rc4, v5.19-rc3, v5.19-rc2, v5.19-rc1, v5.18, v5.18-rc7, v5.18-rc6, v5.18-rc5, v5.18-rc4, v5.18-rc3, v5.18-rc2, v5.18-rc1, v5.17, v5.17-rc8, v5.17-rc7, v5.17-rc6, v5.17-rc5, v5.17-rc4, v5.17-rc3, v5.17-rc2, v5.17-rc1, v5.16, v5.16-rc8, v5.16-rc7, v5.16-rc6, v5.16-rc5, v5.16-rc4, v5.16-rc3, v5.16-rc2, v5.16-rc1, v5.15, v5.15-rc7, v5.15-rc6, v5.15-rc5, v5.15-rc4, v5.15-rc3, v5.15-rc2, v5.15-rc1, v5.14, v5.14-rc7, v5.14-rc6, v5.14-rc5, v5.14-rc4, v5.14-rc3, v5.14-rc2, v5.14-rc1, v5.13, v5.13-rc7, v5.13-rc6, v5.13-rc5, v5.13-rc4, v5.13-rc3, v5.13-rc2, v5.13-rc1, v5.12, v5.12-rc8, v5.12-rc7, v5.12-rc6, v5.12-rc5, v5.12-rc4, v5.12-rc3, v5.12-rc2, v5.12-rc1-dontuse, v5.11, v5.11-rc7, v5.11-rc6, v5.11-rc5, v5.11-rc4, v5.11-rc3, v5.11-rc2, v5.11-rc1, v5.10, v5.10-rc7, v5.10-rc6, v5.10-rc5, v5.10-rc4, v5.10-rc3, v5.10-rc2, v5.10-rc1, v5.9, v5.9-rc8, v5.9-rc7, v5.9-rc6, v5.9-rc5, v5.9-rc4, v5.9-rc3, v5.9-rc2, v5.9-rc1, v5.8, v5.8-rc7, v5.8-rc6, v5.8-rc5, v5.8-rc4, v5.8-rc3, v5.8-rc2, v5.8-rc1, v5.7, v5.7-rc7, v5.7-rc6, v5.7-rc5, v5.7-rc4, v5.7-rc3, v5.7-rc2, v5.7-rc1, v5.6, v5.6-rc7, v5.6-rc6, v5.6-rc5, v5.6-rc4, v5.6-rc3, v5.6-rc2, v5.6-rc1, v5.5, v5.5-rc7, v5.5-rc6, v5.5-rc5, v5.5-rc4, v5.5-rc3, v5.5-rc2, v5.5-rc1, v5.4, v5.4-rc8, v5.4-rc7, v5.4-rc6, v5.4-rc5, v5.4-rc4, v5.4-rc3, v5.4-rc2, v5.4-rc1, v5.3, v5.3-rc8, v5.3-rc7, v5.3-rc6, v5.3-rc5, v5.3-rc4, v5.3-rc3, v5.3-rc2, v5.3-rc1 |
|
#
59747372 |
| 11-Jul-2019 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 5.3 merge window.
|
Revision tags: v5.2, v5.2-rc7, v5.2-rc6, v5.2-rc5, v5.2-rc4, v5.2-rc3, v5.2-rc2, v5.2-rc1 |
|
#
2a267e7c |
| 10-May-2019 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.1' into next
Sync up with mainline to bring in the latest APIs.
|
Revision tags: v5.1, v5.1-rc7, v5.1-rc6, v5.1-rc5, v5.1-rc4, v5.1-rc3, v5.1-rc2, v5.1-rc1, v5.0, v5.0-rc8, v5.0-rc7, v5.0-rc6 |
|
#
82ffd045 |
| 07-Feb-2019 |
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> |
Merge tag 'v5.0-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next
Linux 5.0-rc5
Sync with upstream (which now contains fbdev-v5.0-rc3 changes) to prepare a
Merge tag 'v5.0-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next
Linux 5.0-rc5
Sync with upstream (which now contains fbdev-v5.0-rc3 changes) to prepare a base for fbdev-v5.1 changes.
show more ...
|
Revision tags: v5.0-rc5, v5.0-rc4, v5.0-rc3 |
|
#
3eb66e91 |
| 15-Jan-2019 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v4.20' into for-linus
Sync with mainline to get linux/overflow.h among other things.
|
#
4116941b |
| 14-Jan-2019 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v4.20' into next
Merge with mainline to bring in the new APIs.
|
Revision tags: v5.0-rc2 |
|
#
49e41801 |
| 10-Jan-2019 |
James Morris <james.morris@microsoft.com> |
Merge tag 'v5.0-rc1' into next-general
Linux 5.0-rc1
Sync to pick up LSM stacking work (which is based on -rc1).
|
Revision tags: v5.0-rc1 |
|
#
4971f090 |
| 25-Dec-2018 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie: "Core: - shared fencing staging removal - drop transactional atomic helpers and mov
Merge tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie: "Core: - shared fencing staging removal - drop transactional atomic helpers and move helpers to new location - DP/MST atomic cleanup - Leasing cleanups and drop EXPORT_SYMBOL - Convert drivers to atomic helpers and generic fbdev. - removed deprecated obj_ref/unref in favour of get/put - Improve dumb callback documentation - MODESET_LOCK_BEGIN/END helpers
panels: - CDTech panels, Banana Pi Panel, DLC1010GIG, - Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, - Himax HX8357D, simulated RTSM AEMv8. - GPD Win2 panel - AUO G101EVN010
vgem: - render node support
ttm: - move global init out of drivers - fix LRU handling for ghost objects - Support for simultaneous submissions to multiple engines
scheduler: - timeout/fault handling changes to help GPU recovery - helpers for hw with preemption support
i915: - Scaler/Watermark fixes - DP MST + powerwell fixes - PSR fixes - Break long get/put shmemfs pages - Icelake fixes - Icelake DSI video mode enablement - Engine workaround improvements
amdgpu: - freesync support - GPU reset enabled on CI, VI, SOC15 dGPUs - ABM support in DC - KFD support for vega12/polaris12 - SDMA paging queue on vega - More amdkfd code sharing - DCC scanout on GFX9 - DC kerneldoc - Updated SMU firmware for GFX8 chips - XGMI PSP + hive reset support - GPU reset - DC trace support - Powerplay updates for newer Polaris - Cursor plane update fast path - kfd dma-buf support
virtio-gpu: - add EDID support
vmwgfx: - pageflip with damage support
nouveau: - Initial Turing TU104/TU106 modesetting support
msm: - a2xx gpu support for apq8060 and imx5 - a2xx gpummu support - mdp4 display support for apq8060 - DPU fixes and cleanups - enhanced profiling support - debug object naming interface - get_iova/page pinning decoupling
tegra: - Tegra194 host1x, VIC and display support enabled - Audio over HDMI for Tegra186 and Tegra194
exynos: - DMA/IOMMU refactoring - plane alpha + blend mode support - Color format fixes for mixer driver
rcar-du: - R8A7744 and R8A77470 support - R8A77965 LVDS support
imx: - fbdev emulation fix - multi-tiled scalling fixes - SPDX identifiers
rockchip - dw_hdmi support - dw-mipi-dsi + dual dsi support - mailbox read size fix
qxl: - fix cursor pinning
vc4: - YUV support (scaling + cursor)
v3d: - enable TFU (Texture Formatting Unit)
mali-dp: - add support for linear tiled formats
sun4i: - Display Engine 3 support - H6 DE3 mixer 0 support - H6 display engine support - dw-hdmi support - H6 HDMI phy support - implicit fence waiting - BGRX8888 support
meson: - Overlay plane support - implicit fence waiting - HDMI 1.4 4k modes
bridge: - i2c fixes for sii902x"
* tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits) drm/amd/display: Add fast path for cursor plane updates drm/amdgpu: Enable GPU recovery by default for CI drm/amd/display: Fix duplicating scaling/underscan connector state drm/amd/display: Fix unintialized max_bpc state values Revert "drm/amd/display: Set RMX_ASPECT as default" drm/amdgpu: Fix stub function name drm/msm/dpu: Fix clock issue after bind failure drm/msm/dpu: Clean up dpu_media_info.h static inline functions drm/msm/dpu: Further cleanups for static inline functions drm/msm/dpu: Cleanup the debugfs functions drm/msm/dpu: Remove dpu_irq and unused functions drm/msm: Make irq_postinstall optional drm/msm/dpu: Cleanup callers of dpu_hw_blk_init drm/msm/dpu: Remove unused functions drm/msm/dpu: Remove dpu_crtc_is_enabled() drm/msm/dpu: Remove dpu_crtc_get_mixer_height drm/msm/dpu: Remove dpu_dbg drm/msm: dpu: Remove crtc_lock drm/msm: dpu: Remove vblank_requested flag from dpu_crtc drm/msm: dpu: Separate crtc assignment from vblank enable ...
show more ...
|
Revision tags: v4.20, v4.20-rc7, v4.20-rc6, v4.20-rc5, v4.20-rc4 |
|
#
2ac5e38e |
| 20-Nov-2018 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next-queued
Pull in v4.20-rc3 via drm-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
#
d7563c55 |
| 19-Nov-2018 |
Dave Airlie <airlied@redhat.com> |
Merge tag 'drm-misc-next-2018-11-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.21, part 1:
UAPI Changes: - Add syncobj timeline support to drm.
Cross-subsyst
Merge tag 'drm-misc-next-2018-11-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.21, part 1:
UAPI Changes: - Add syncobj timeline support to drm.
Cross-subsystem Changes: - Remove shared fence staging in dma-buf's fence object, and allow reserving more than 1 fence and add more paranoia when debugging. - Constify infoframe functions in video/hdmi.
Core Changes: - Add vkms todo, and a lot of assorted doc fixes. - Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown(). - Move atomic state helper functions to drm_atomic_state_helper.[ch] - Refactor drm selftests, and add new tests. - DP MST atomic state cleanups. - Drop EXPORT_SYMBOL from drm leases. - Lease cleanups and fixes. - Create render node for vgem.
Driver Changes: - Fix build failure in imx without fbdev emulation. - Add rotation quirk for GPD win2 panel. - Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG, Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, Himax HX8357D, simulated RTSM AEMv8. - Add dw_hdmi support to rockchip driver. - Fix YUV support in vc4. - Fix resource id handling in virtio. - Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support. - Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR. - Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup(). - Add Mali linear tiled formats, and enable them in the Mali-DP driver. - Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP. - Assorted driver cleanups and fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/be7ebd91-edd9-8fa4-4286-1c57e3165113@linux.intel.com
show more ...
|
Revision tags: v4.20-rc3, v4.20-rc2, v4.20-rc1, v4.19, v4.19-rc8, v4.19-rc7 |
|
#
84c08517 |
| 04-Oct-2018 |
Daniel Vetter <daniel.vetter@ffwll.ch> |
drm: Unexport drm_plane_helper_check_update
It's for legacy drivers only (atomic ones should use drm_atomic_helper_check_plane_state() instead), and there's no users left except the one in the prima
drm: Unexport drm_plane_helper_check_update
It's for legacy drivers only (atomic ones should use drm_atomic_helper_check_plane_state() instead), and there's no users left except the one in the primary plane helpers.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-18-daniel.vetter@ffwll.ch
show more ...
|
#
6b6fce62 |
| 05-Oct-2018 |
Daniel Vetter <daniel.vetter@ffwll.ch> |
drm: Unexport primary plane helpers
Well except the destroy helper, which isn't really a primary helper but generally useful, if mislabelled.
v2: Keep some of the nice comments about the limitation
drm: Unexport primary plane helpers
Well except the destroy helper, which isn't really a primary helper but generally useful, if mislabelled.
v2: Keep some of the nice comments about the limitations of the primarmy plane helpers, and put them into the kerneldoc for drm_crtc_init() (Sam).
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005094732.31353-1-daniel.vetter@ffwll.ch
show more ...
|
#
21ebe615 |
| 04-Oct-2018 |
Daniel Vetter <daniel.vetter@ffwll.ch> |
drm: Remove transitional helpers
With armada the last bigger driver that realistically needed these to convert from legacy kms to atomic is converted. These helpers have been broken more often than
drm: Remove transitional helpers
With armada the last bigger driver that realistically needed these to convert from legacy kms to atomic is converted. These helpers have been broken more often than not the past 2 years, and as this little patch series shows, tricked a bunch of people into using the wrong helpers for their functions.
Aside: I think a lot more drivers should be using the device-level drm_atomic_helper_shutdown/suspend/resume helpers and related functions. In almost all the cases they get things exactly right.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-16-daniel.vetter@ffwll.ch
show more ...
|
Revision tags: v4.19-rc6 |
|
#
aaccf3c9 |
| 26-Sep-2018 |
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> |
Merge tag 'v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next
Sync with upstream (which now contains fbdev-v4.19 changes) to prepare a base for fbdev-v4
Merge tag 'v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next
Sync with upstream (which now contains fbdev-v4.19 changes) to prepare a base for fbdev-v4.20 changes.
show more ...
|
Revision tags: v4.19-rc5, v4.19-rc4 |
|
#
9ac669fc |
| 15-Sep-2018 |
Thomas Gleixner <tglx@linutronix.de> |
Merge tag 'y2038' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into timers/core
Pull more y2038 work from Arnd Bergman:
y2038: convert more syscalls
Here is another set of syst
Merge tag 'y2038' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into timers/core
Pull more y2038 work from Arnd Bergman:
y2038: convert more syscalls
Here is another set of system call changes to prepare the change over to 64-bit time_t. As before, the strategy is to change system calls that take a 'struct timespec' argument over to 'struct __kernel_timespec', which for now is defined to be the same but will get redefined to use a 64-bit time_t argument once we are ready to modify the system call tables.
The major change from previous patches is that the plan is no longer to directly use the 'compat' system calls for providing compatibility with the existing 32-bit time_t based entry points. Instead, we rename the compat code to something that makes more sense on 32-bit architectures, e.g. compat_timespec becomes old_timespec32.
With the renamed types in place, change over the 'stat' and 'utimes' families of system calls, sched_rr_get_interval, recvmmsg and rt_sigtimedwait. Another series for poll, select and io_pgetevents is currently being tested.
show more ...
|
Revision tags: v4.19-rc3 |
|
#
e42f6f9b |
| 04-Sep-2018 |
James Morris <james.morris@microsoft.com> |
Merge tag 'v4.19-rc2' into next-general
Sync to Linux 4.19-rc2 for downstream developers.
|
Revision tags: v4.19-rc2 |
|
#
6e2d6b27 |
| 28-Aug-2018 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v4.19-rc1' into asoc-4.19
Linux 4.19-rc1
|
#
ea4d65f1 |
| 28-Aug-2018 |
Tony Lindgren <tony@atomide.com> |
Merge branch 'perm-fix' into omap-for-v4.19/fixes-v2
|
Revision tags: v4.19-rc1 |
|
#
0a3173a5 |
| 16-Aug-2018 |
Jason Gunthorpe <jgg@mellanox.com> |
Merge branch 'linus/master' into rdma.git for-next
rdma.git merge resolution for the 4.19 merge window
Conflicts: drivers/infiniband/core/rdma_core.c - Use the rdma code and revise with the new
Merge branch 'linus/master' into rdma.git for-next
rdma.git merge resolution for the 4.19 merge window
Conflicts: drivers/infiniband/core/rdma_core.c - Use the rdma code and revise with the new spelling for atomic_fetch_add_unless drivers/nvme/host/rdma.c - Replace max_sge with max_send_sge in new blk code drivers/nvme/target/rdma.c - Use the blk code and revise to use NULL for ib_post_recv when appropriate - Replace max_sge with max_recv_sge in new blk code net/rds/ib_send.c - Use the net code and revise to use NULL for ib_post_recv when appropriate
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
show more ...
|
#
54dbe75b |
| 16-Aug-2018 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.19.
Rob has some new hardware support for new
Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.19.
Rob has some new hardware support for new qualcomm hw that I'll send along separately. This has the display part of it, the remaining pull is for the acceleration engine.
This also contains a wound-wait/wait-die mutex rework, Peter has acked it for merging via my tree.
Otherwise mostly the usual level of activity. Summary:
core: - Wound-wait/wait-die mutex rework - Add writeback connector type - Add "content type" property for HDMI - Move GEM bo to drm_framebuffer - Initial gpu scheduler documentation - GPU scheduler fixes for dying processes - Console deferred fbcon takeover support - Displayport support for CEC tunneling over AUX
panel: - otm8009a panel driver fixes - Innolux TV123WAM and G070Y2-L01 panel driver - Ilitek ILI9881c panel driver - Rocktech RK070ER9427 LCD - EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6 - DLC DLC0700YZG-1 - BOE HV070WSA-100 - newhaven, nhd-4.3-480272ef-atxl LCD - DataImage SCF0700C48GGU18 - Sharp LQ035Q7DB03 - p079zca: Refactor to support multiple panels
tinydrm: - ILI9341 display panel
New driver: - vkms - virtual kms driver to testing.
i915: - Icelake: Display enablement DSI support IRQ support Powerwell support - GPU reset fixes and improvements - Full ppgtt support refactoring - PSR fixes and improvements - Execlist improvments - GuC related fixes
amdgpu: - Initial amdgpu documentation - JPEG engine support on VCN - CIK uses powerplay by default - Move to using core PCIE functionality for gens/lanes - DC/Powerplay interface rework - Stutter mode support for RV - Vega12 Powerplay updates - GFXOFF fixes - GPUVM fault debugging - Vega12 GFXOFF - DC improvements - DC i2c/aux changes - UVD 7.2 fixes - Powerplay fixes for Polaris12, CZ/ST - command submission bo_list fixes
amdkfd: - Raven support - Power management fixes
udl: - Cleanups and fixes
nouveau: - misc fixes and cleanups.
msm: - DPU1 support display controller in sdm845 - GPU coredump support.
vmwgfx: - Atomic modesetting validation fixes - Support for multisample surfaces
armada: - Atomic modesetting support completed.
exynos: - IPPv2 fixes - Move g2d to component framework - Suspend/resume support cleanups - Driver cleanups
imx: - CSI configuration improvements - Driver cleanups - Use atomic suspend/resume helpers - ipu-v3 V4L2 XRGB32/XBGR32 support
pl111: - Add Nomadik LCDC variant
v3d: - GPU scheduler jobs management
sun4i: - R40 display engine support - TCON TOP driver
mediatek: - MT2712 SoC support
rockchip: - vop fixes
omapdrm: - Workaround for DRA7 errata i932 - Fix mm_list locking
mali-dp: - Writeback implementation PM improvements - Internal error reporting debugfs
tilcdc: - Single fix for deferred probing
hdlcd: - Teardown fixes
tda998x: - Converted to a bridge driver.
etnaviv: - Misc fixes"
* tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits) drm/amdgpu/sriov: give 8s for recover vram under RUNTIME drm/scheduler: fix param documentation drm/i2c: tda998x: correct PLL divider calculation drm/i2c: tda998x: get rid of private fill_modes function drm/i2c: tda998x: move mode_valid() to bridge drm/i2c: tda998x: register bridge outside of component helper drm/i2c: tda998x: cleanup from previous changes drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create() drm/i2c: tda998x: convert to bridge driver drm/scheduler: fix timeout worker setup for out of order job completions drm/amd/display: display connected to dp-1 does not light up drm/amd/display: update clk for various HDMI color depths drm/amd/display: program display clock on cache match drm/amd/display: Add NULL check for enabling dp ss drm/amd/display: add vbios table check for enabling dp ss drm/amd/display: Don't share clk source between DP and HDMI drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo drm/amd/display: Use calculated disp_clk_khz value for dce110 drm/amd/display: Implement custom degamma lut on dcn drm/amd/display: Destroy aux_engines only once ...
show more ...
|
Revision tags: v4.18, v4.18-rc8, v4.18-rc7 |
|
#
c74a7469 |
| 23-Jul-2018 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-next-queued
We need a backmerge to get DP_DPCD_REV_14 before we push other i915 changes to dinq that could break compilation.
Signed-off-by: Rodrigo Vivi <rodrigo.
Merge drm/drm-next into drm-intel-next-queued
We need a backmerge to get DP_DPCD_REV_14 before we push other i915 changes to dinq that could break compilation.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
show more ...
|
Revision tags: v4.18-rc6, v4.18-rc5, v4.18-rc4 |
|
#
a1c3b495 |
| 06-Jul-2018 |
Dave Airlie <airlied@redhat.com> |
Merge tag 'drm-misc-next-2018-07-04' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.19:
UAPI Changes: v3d: add fourcc modicfier for fourcc for the Broadcom UIF form
Merge tag 'drm-misc-next-2018-07-04' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.19:
UAPI Changes: v3d: add fourcc modicfier for fourcc for the Broadcom UIF format (Eric Anholt)
Cross-subsystem Changes: console/fbcon: Add support for deferred console takeover (Hans de Goede)
Core Changes: dma-fence clean up, improvements and docs (Daniel Vetter) add mask function for crtc, plane, encoder and connector DRM objects(Ville Syrjälä)
Driver Changes: pl111: add Nomadik LCDC variant (Linus Walleij)
Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180704234641.GA3981@juma
show more ...
|
#
070473bc |
| 02-Jul-2018 |
Russell King <rmk+kernel@armlinux.org.uk> |
drm: add missing ctx argument to plane transitional helpers
In commits: 34a2ab5e0689 ("drm: Add acquire ctx parameter to ->update_plane") 1931529448bc ("drm: Add acquire ctx parameter to ->plane_dis
drm: add missing ctx argument to plane transitional helpers
In commits: 34a2ab5e0689 ("drm: Add acquire ctx parameter to ->update_plane") 1931529448bc ("drm: Add acquire ctx parameter to ->plane_disable")
a pointer to a drm_modeset_acquire_ctx structure was added as an argument to the method prototypes. The transitional helpers are supposed to be directly plugged in as implementations of these methods, but doing so generates a warning. Add the missing argument.
A number of buggy users were added for drm_plane_helper_disable() which need to be fixed up for this change, which we do by passing a NULL ctx argument.
Fixes: 1931529448bc ("drm: Add acquire ctx parameter to ->plane_disable") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/E1fa1Zr-0005gT-VF@rmk-PC.armlinux.org.uk
show more ...
|