fs: port xattr to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conver

fs: port xattr to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

fs: port ->permission() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is j

fs: port ->permission() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

fs: port ->setattr() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just

fs: port ->setattr() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

fs: port vfs_*() helpers to struct mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This i

fs: port vfs_*() helpers to struct mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

filelock: move file locking definitions to separate header file

The file locking definitions have lived in fs.h since the dawn of time,
but they are only used by a small subset of the source files t

filelock: move file locking definitions to separate header file

The file locking definitions have lived in fs.h since the dawn of time,
but they are only used by a small subset of the source files that
include it.

Move the file locking definitions to a new header file, and add the
appropriate #include directives to the source files that need them. By
doing this we trim down fs.h a bit and limit the amount of rebuilding
that has to be done when we make changes to the file locking APIs.

Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Steve French <stfrench@microsoft.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>

show more ...

Merge tag 'v6.2-rc3' into next

Merge with mainline to bring in timer_shutdown_sync() API.

Merge drm/drm-next into drm-intel-next

Sync up with v6.2-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Sync after v6.2-rc1 landed in drm-next.

We need to get some dependencies in place before we can merge
the fixes series from Gwan-gyeong and Chris.

Referen

Merge drm/drm-next into drm-intel-gt-next

Sync after v6.2-rc1 landed in drm-next.

We need to get some dependencies in place before we can merge
the fixes series from Gwan-gyeong and Chris.

References: https://lore.kernel.org/all/Y6x5JCDnh2rvh4lA@intel.com/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge tag 'v6.2-rc1' into media_tree

Linux 6.2-rc1

* tag 'v6.2-rc1': (14398 commits)
Linux 6.2-rc1
treewide: Convert del_timer*() to timer_shutdown*()
pstore: Properly assign mem_type propert

Merge tag 'v6.2-rc1' into media_tree

Linux 6.2-rc1

* tag 'v6.2-rc1': (14398 commits)
Linux 6.2-rc1
treewide: Convert del_timer*() to timer_shutdown*()
pstore: Properly assign mem_type property
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
cfi: Fix CFI failure with KASAN
perf python: Fix splitting CC into compiler and options
afs: Stop implementing ->writepage()
afs: remove afs_cache_netfs and afs_zap_permits() declarations
afs: remove variable nr_servers
afs: Fix lost servers_outstanding count
ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless
ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl()
gcov: add support for checksum field
test_maple_tree: add test for mas_spanning_rebalance() on insufficient data
maple_tree: fix mas_spanning_rebalance() on insufficient data
hugetlb: really allocate vma lock for all sharable vmas
kmsan: export kmsan_handle_urb
kmsan: include linux/vmalloc.h
mm/mempolicy: fix memory leak in set_mempolicy_home_node system call
mm, mremap: fix mremap() expanding vma with addr inside vma
...

show more ...

Merge wireless into wireless-next

Due to the two cherry picked commits from wireless to wireless-next we have
several conflicts in mt76. To avoid any bugs with conflicts merge wireless into
wireless

Merge wireless into wireless-next

Due to the two cherry picked commits from wireless to wireless-next we have
several conflicts in mt76. To avoid any bugs with conflicts merge wireless into
wireless-next.

96f134dc1964 wifi: mt76: handle possible mt76_rx_token_consume failures
fe13dad8992b wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Let's start the fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge remote-tracking branch 'torvalds/master' into perf/core

To resolve a trivial merge conflict with c302378bc157f6a7 ("libbpf:
Hashmap interface update to allow both long and void* keys/values"),

Merge remote-tracking branch 'torvalds/master' into perf/core

To resolve a trivial merge conflict with c302378bc157f6a7 ("libbpf:
Hashmap interface update to allow both long and void* keys/values"),
where a function present upstream was removed in the perf tools
development tree.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge branch 'main' into zstd-linus

Merge tag 'fs.ovl.setgid.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull setgid inheritance updates from Christian Brauner:
"This contains the work to make setgid inherita

Merge tag 'fs.ovl.setgid.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull setgid inheritance updates from Christian Brauner:
"This contains the work to make setgid inheritance consistent between
modifying a file and when changing ownership or mode as this has been
a repeated source of very subtle bugs. The gist is that we perform the
same permission checks in the write path as we do in the ownership and
mode changing paths after this series where we're currently doing
different things.

We've already made setgid inheritance a lot more consistent and
reliable in the last releases by moving setgid stripping from the
individual filesystems up into the vfs. This aims to make the logic
even more consistent and easier to understand and also to fix
long-standing overlayfs setgid inheritance bugs. Miklos was nice
enough to just let me carry the trivial overlayfs patches from Amir
too.

Below is a more detailed explanation how the current difference in
setgid handling lead to very subtle bugs exemplified via overlayfs
which is a victim of the current rules. I hope this explains why I
think taking the regression risk here is worth it.

A long while ago I found a few setgid inheritance bugs in overlayfs in
the write path in certain conditions. Amir recently picked this back
up in [1] and I jumped on board to fix this more generally.

On the surface all that overlayfs would need to fix setgid inheritance
would be to call file_remove_privs() or file_modified() but actually
that isn't enough because the setgid inheritance api is wildly
inconsistent in that area.

Before this pr setgid stripping in file_remove_privs()'s old
should_remove_suid() helper was inconsistent with other parts of the
vfs. Specifically, it only raises ATTR_KILL_SGID if the inode is
S_ISGID and S_IXGRP but not if the inode isn't in the caller's groups
and the caller isn't privileged over the inode although we require
this already in setattr_prepare() and setattr_copy() and so all
filesystem implement this requirement implicitly because they have to
use setattr_{prepare,copy}() anyway.

But the inconsistency shows up in setgid stripping bugs for overlayfs
in xfstests (e.g., generic/673, generic/683, generic/685, generic/686,
generic/687). For example, we test whether suid and setgid stripping
works correctly when performing various write-like operations as an
unprivileged user (fallocate, reflink, write, etc.):

echo "Test 1 - qa_user, non-exec file $verb"
setup_testfile
chmod a+rws $junk_file
commit_and_check "$qa_user" "$verb" 64k 64k

The test basically creates a file with 6666 permissions. While the
file has the S_ISUID and S_ISGID bits set it does not have the S_IXGRP
set.

On a regular filesystem like xfs what will happen is:

sys_fallocate()
-> vfs_fallocate()
-> xfs_file_fallocate()
-> file_modified()
-> __file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = ATTR_FORCE | kill;
-> notify_change()
-> setattr_copy()

In should_remove_suid() we can see that ATTR_KILL_SUID is raised
unconditionally because the file in the test has S_ISUID set.

But we also see that ATTR_KILL_SGID won't be set because while the
file is S_ISGID it is not S_IXGRP (see above) which is a condition for
ATTR_KILL_SGID being raised.

So by the time we call notify_change() we have attr->ia_valid set to
ATTR_KILL_SUID | ATTR_FORCE.

Now notify_change() sees that ATTR_KILL_SUID is set and does:

ia_valid = attr->ia_valid |= ATTR_MODE
attr->ia_mode = (inode->i_mode & ~S_ISUID);

which means that when we call setattr_copy() later we will definitely
update inode->i_mode. Note that attr->ia_mode still contains S_ISGID.

Now we call into the filesystem's ->setattr() inode operation which
will end up calling setattr_copy(). Since ATTR_MODE is set we will
hit:

if (ia_valid & ATTR_MODE) {
umode_t mode = attr->ia_mode;
vfsgid_t vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
if (!vfsgid_in_group_p(vfsgid) &&
!capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
mode &= ~S_ISGID;
inode->i_mode = mode;
}

and since the caller in the test is neither capable nor in the group
of the inode the S_ISGID bit is stripped.

But assume the file isn't suid then ATTR_KILL_SUID won't be raised
which has the consequence that neither the setgid nor the suid bits
are stripped even though it should be stripped because the inode isn't
in the caller's groups and the caller isn't privileged over the inode.

If overlayfs is in the mix things become a bit more complicated and
the bug shows up more clearly.

When e.g., ovl_setattr() is hit from ovl_fallocate()'s call to
file_remove_privs() then ATTR_KILL_SUID and ATTR_KILL_SGID might be
raised but because the check in notify_change() is questioning the
ATTR_KILL_SGID flag again by requiring S_IXGRP for it to be stripped
the S_ISGID bit isn't removed even though it should be stripped:

sys_fallocate()
-> vfs_fallocate()
-> ovl_fallocate()
-> file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = ATTR_FORCE | kill;
-> notify_change()
-> ovl_setattr()
/* TAKE ON MOUNTER'S CREDS */
-> ovl_do_notify_change()
-> notify_change()
/* GIVE UP MOUNTER'S CREDS */
/* TAKE ON MOUNTER'S CREDS */
-> vfs_fallocate()
-> xfs_file_fallocate()
-> file_modified()
-> __file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = attr_force | kill;
-> notify_change()

The fix for all of this is to make file_remove_privs()'s
should_remove_suid() helper perform the same checks as we already
require in setattr_prepare() and setattr_copy() and have
notify_change() not pointlessly requiring S_IXGRP again. It doesn't
make any sense in the first place because the caller must calculate
the flags via should_remove_suid() anyway which would raise
ATTR_KILL_SGID

Note that some xfstests will now fail as these patches will cause the
setgid bit to be lost in certain conditions for unprivileged users
modifying a setgid file when they would've been kept otherwise. I
think this risk is worth taking and I explained and mentioned this
multiple times on the list [2].

Enforcing the rules consistently across write operations and
chmod/chown will lead to losing the setgid bit in cases were it
might've been retained before.

While I've mentioned this a few times but it's worth repeating just to
make sure that this is understood. For the sake of maintainability,
consistency, and security this is a risk worth taking.

If we really see regressions for workloads the fix is to have special
setgid handling in the write path again with different semantics from
chmod/chown and possibly additional duct tape for overlayfs. I'll
update the relevant xfstests with if you should decide to merge this
second setgid cleanup.

Before that people should be aware that there might be failures for
fstests where unprivileged users modify a setgid file"

Link: https://lore.kernel.org/linux-fsdevel/20221003123040.900827-1-amir73il@gmail.com [1]
Link: https://lore.kernel.org/linux-fsdevel/20221122142010.zchf2jz2oymx55qi@wittgenstein [2]

* tag 'fs.ovl.setgid.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
fs: use consistent setgid checks in is_sxid()
ovl: remove privs in ovl_fallocate()
ovl: remove privs in ovl_copyfile()
attr: use consistent sgid stripping checks
attr: add setattr_should_drop_sgid()
fs: move should_remove_suid()
attr: add in_group_or_capable()

show more ...

Merge branch 'main' into zstd-next

Merge branch 'fs.ovl.setgid' into for-next

* fs.ovl.setgid:
ovl: remove privs in ovl_fallocate()
ovl: remove privs in ovl_copyfile()
attr: use consistent sgid stripping checks
attr: add seta

Merge branch 'fs.ovl.setgid' into for-next

* fs.ovl.setgid:
ovl: remove privs in ovl_fallocate()
ovl: remove privs in ovl_copyfile()
attr: use consistent sgid stripping checks
attr: add setattr_should_drop_sgid()
fs: move should_remove_suid()
attr: add in_group_or_capable()

show more ...

attr: use consistent sgid stripping checks

Currently setgid stripping in file_remove_privs()'s should_remove_suid()
helper is inconsistent with other parts of the vfs. Specifically, it only
raises A

attr: use consistent sgid stripping checks

Currently setgid stripping in file_remove_privs()'s should_remove_suid()
helper is inconsistent with other parts of the vfs. Specifically, it only
raises ATTR_KILL_SGID if the inode is S_ISGID and S_IXGRP but not if the
inode isn't in the caller's groups and the caller isn't privileged over the
inode although we require this already in setattr_prepare() and
setattr_copy() and so all filesystem implement this requirement implicitly
because they have to use setattr_{prepare,copy}() anyway.

But the inconsistency shows up in setgid stripping bugs for overlayfs in
xfstests (e.g., generic/673, generic/683, generic/685, generic/686,
generic/687). For example, we test whether suid and setgid stripping works
correctly when performing various write-like operations as an unprivileged
user (fallocate, reflink, write, etc.):

echo "Test 1 - qa_user, non-exec file $verb"
setup_testfile
chmod a+rws $junk_file
commit_and_check "$qa_user" "$verb" 64k 64k

The test basically creates a file with 6666 permissions. While the file has
the S_ISUID and S_ISGID bits set it does not have the S_IXGRP set. On a
regular filesystem like xfs what will happen is:

sys_fallocate()
-> vfs_fallocate()
-> xfs_file_fallocate()
-> file_modified()
-> __file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = ATTR_FORCE | kill;
-> notify_change()
-> setattr_copy()

In should_remove_suid() we can see that ATTR_KILL_SUID is raised
unconditionally because the file in the test has S_ISUID set.

But we also see that ATTR_KILL_SGID won't be set because while the file
is S_ISGID it is not S_IXGRP (see above) which is a condition for
ATTR_KILL_SGID being raised.

So by the time we call notify_change() we have attr->ia_valid set to
ATTR_KILL_SUID | ATTR_FORCE. Now notify_change() sees that
ATTR_KILL_SUID is set and does:

ia_valid = attr->ia_valid |= ATTR_MODE
attr->ia_mode = (inode->i_mode & ~S_ISUID);

which means that when we call setattr_copy() later we will definitely
update inode->i_mode. Note that attr->ia_mode still contains S_ISGID.

Now we call into the filesystem's ->setattr() inode operation which will
end up calling setattr_copy(). Since ATTR_MODE is set we will hit:

if (ia_valid & ATTR_MODE) {
umode_t mode = attr->ia_mode;
vfsgid_t vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
if (!vfsgid_in_group_p(vfsgid) &&
!capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
mode &= ~S_ISGID;
inode->i_mode = mode;
}

and since the caller in the test is neither capable nor in the group of the
inode the S_ISGID bit is stripped.

But assume the file isn't suid then ATTR_KILL_SUID won't be raised which
has the consequence that neither the setgid nor the suid bits are stripped
even though it should be stripped because the inode isn't in the caller's
groups and the caller isn't privileged over the inode.

If overlayfs is in the mix things become a bit more complicated and the bug
shows up more clearly. When e.g., ovl_setattr() is hit from
ovl_fallocate()'s call to file_remove_privs() then ATTR_KILL_SUID and
ATTR_KILL_SGID might be raised but because the check in notify_change() is
questioning the ATTR_KILL_SGID flag again by requiring S_IXGRP for it to be
stripped the S_ISGID bit isn't removed even though it should be stripped:

sys_fallocate()
-> vfs_fallocate()
-> ovl_fallocate()
-> file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = ATTR_FORCE | kill;
-> notify_change()
-> ovl_setattr()
// TAKE ON MOUNTER'S CREDS
-> ovl_do_notify_change()
-> notify_change()
// GIVE UP MOUNTER'S CREDS
// TAKE ON MOUNTER'S CREDS
-> vfs_fallocate()
-> xfs_file_fallocate()
-> file_modified()
-> __file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = attr_force | kill;
-> notify_change()

The fix for all of this is to make file_remove_privs()'s
should_remove_suid() helper to perform the same checks as we already
require in setattr_prepare() and setattr_copy() and have notify_change()
not pointlessly requiring S_IXGRP again. It doesn't make any sense in the
first place because the caller must calculate the flags via
should_remove_suid() anyway which would raise ATTR_KILL_SGID.

While we're at it we move should_remove_suid() from inode.c to attr.c
where it belongs with the rest of the iattr helpers. Especially since it
returns ATTR_KILL_S{G,U}ID flags. We also rename it to
setattr_should_drop_suidgid() to better reflect that it indicates both
setuid and setgid bit removal and also that it returns attr flags.

Running xfstests with this doesn't report any regressions. We should really
try and use consistent checks.

Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

attr: add setattr_should_drop_sgid()

The current setgid stripping logic during write and ownership change
operations is inconsistent and strewn over multiple places. In order to
consolidate it and m

attr: add setattr_should_drop_sgid()

The current setgid stripping logic during write and ownership change
operations is inconsistent and strewn over multiple places. In order to
consolidate it and make more consistent we'll add a new helper
setattr_should_drop_sgid(). The function retains the old behavior where
we remove the S_ISGID bit unconditionally when S_IXGRP is set but also
when it isn't set and the caller is neither in the group of the inode
nor privileged over the inode.

We will use this helper both in write operation permission removal such
as file_remove_privs() as well as in ownership change operations.

Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

fs: move should_remove_suid()

Move the helper from inode.c to attr.c. This keeps the the core of the
set{g,u}id stripping logic in one place when we add follow-up changes.
It is the better place any

fs: move should_remove_suid()

Move the helper from inode.c to attr.c. This keeps the the core of the
set{g,u}id stripping logic in one place when we add follow-up changes.
It is the better place anyway, since should_remove_suid() returns
ATTR_KILL_S{G,U}ID flags.

Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

attr: add in_group_or_capable()

In setattr_{copy,prepare}() we need to perform the same permission
checks to determine whether we need to drop the setgid bit or not.
Instead of open-coding it twice

attr: add in_group_or_capable()

In setattr_{copy,prepare}() we need to perform the same permission
checks to determine whether we need to drop the setgid bit or not.
Instead of open-coding it twice add a simple helper the encapsulates the
logic. We will reuse this helpers to make dropping the setgid bit during
write operations more consistent in a follow up patch.

Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.1 merge window.

Merge branch 'for-6.1/logitech' into for-linus

- Add hanlding of all Bluetooth HID++ devices and fixes in hid++
(Bastien Nocera)

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'for-6.1/nvdimm' into libnvdimm-for-next

Add v6.1 content on top of some straggling updates that missed v6.0.

Merge branch 'mlx5-vfio' into mlx5-next

Merge net/mlx5 dependencies for device DMA logging.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>