Merge tag 'v5.1-rc1' into regulator-5.2

Linux 5.1-rc1

Merge tag 'v5.1-rc1' into asoc-5.2

Linux 5.1-rc1

Merge tag 'v5.1-rc1' into asoc-5.1

Linux 5.1-rc1

Merge tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
"Here is the big USB/PHY driver pull request for 5.1-rc1.

The usual set of

Merge tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
"Here is the big USB/PHY driver pull request for 5.1-rc1.

The usual set of gadget driver updates, phy driver updates, xhci
updates, and typec additions. Also included in here are a lot of small
cleanups and fixes and driver updates where needed.

All of these have been in linux-next for a while with no reported
issues"

* tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
wusb: Remove unnecessary static function ckhdid_printf
usb: core: make default autosuspend delay configurable
usb: core: Fix typo in description of "authorized_default"
usb: chipidea: Refactor USB PHY selection and keep a single PHY
usb: chipidea: Grab the (legacy) USB PHY by phandle first
usb: chipidea: imx: set power polarity
dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
usb: chipidea: imx: remove unused header files
usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
usb: core: add option of only authorizing internal devices
usb: typec: tps6598x: handle block writes separately with plain-I2C adapters
usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
usb: xhci: fix build warning - missing prototype
usb: xhci: dbc: Fixing typo error.
usb: xhci: remove unused member 'parent' in xhci_regset struct
xhci: tegra: Prevent error pointer dereference
USB: serial: option: add Telit ME910 ECM composition
usb: core: Replace hardcoded check with inline function from usb.h
usb: core: skip interfaces disabled in devicetree
usb: typec: mux: remove redundant check on variable match
...

show more ...

USB: add missing SPDX lines to Kconfig and Makefiles

There are a few remaining drivers/usb/ files that do not have SPDX
identifiers in them, all of these are either Kconfig or Makefiles. Add
the co

USB: add missing SPDX lines to Kconfig and Makefiles

There are a few remaining drivers/usb/ files that do not have SPDX
identifiers in them, all of these are either Kconfig or Makefiles. Add
the correct GPL-2.0 identifier to them to make scanning tools happy.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v4.20' into for-linus

Sync with mainline to get linux/overflow.h among other things.

Merge tag 'v4.20' into next

Merge with mainline to bring in the new APIs.

Merge tag 'v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Sync with upstream (which now contains fbdev-v4.19 changes) to
prepare a base for fbdev-v4

Merge tag 'v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Sync with upstream (which now contains fbdev-v4.19 changes) to
prepare a base for fbdev-v4.20 changes.

show more ...

Merge drm/drm-next into drm-intel-next-queued

Catch up in general, and get DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT
specifically.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'y2038' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into timers/core

Pull more y2038 work from Arnd Bergman:

y2038: convert more syscalls

Here is another set of syst

Merge tag 'y2038' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into timers/core

Pull more y2038 work from Arnd Bergman:

y2038: convert more syscalls

Here is another set of system call changes to prepare the change over to
64-bit time_t. As before, the strategy is to change system calls that
take a 'struct timespec' argument over to 'struct __kernel_timespec',
which for now is defined to be the same but will get redefined to use a
64-bit time_t argument once we are ready to modify the system call tables.

The major change from previous patches is that the plan is no longer
to directly use the 'compat' system calls for providing compatibility
with the existing 32-bit time_t based entry points. Instead, we rename
the compat code to something that makes more sense on 32-bit architectures,
e.g. compat_timespec becomes old_timespec32.

With the renamed types in place, change over the 'stat' and 'utimes'
families of system calls, sched_rr_get_interval, recvmmsg and
rt_sigtimedwait. Another series for poll, select and io_pgetevents is
currently being tested.

show more ...

Merge tag 'v4.19-rc2' into next-general

Sync to Linux 4.19-rc2 for downstream developers.

Merge tag 'v4.19-rc1' into asoc-4.19

Linux 4.19-rc1

Merge branch 'perm-fix' into omap-for-v4.19/fixes-v2

Merge drm/drm-next into drm-misc-next

Now that 4.19-rc1 is cut, backmerge it into -misc-next.

Signed-off-by: Sean Paul <seanpaul@chromium.org>

Merge tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
"Here is the big USB and phy driver patch set for 4.19-rc1.

Nothing huge b

Merge tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
"Here is the big USB and phy driver patch set for 4.19-rc1.

Nothing huge but there was a lot of work that happened this
development cycle:

- lots of type-c work, with drivers graduating out of staging, and
displayport support being added.

- new PHY drivers

- the normal collection of gadget driver updates and fixes

- code churn to work on the urb handling path, using irqsave()
everywhere in anticipation of making this codepath a lot simpler in
the future.

- usbserial driver fixes and reworks

- other misc changes

All of these have been in linux-next with no reported issues for a
while"

* tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
USB: serial: pl2303: add a new device id for ATEN
usb: renesas_usbhs: Kconfig: convert to SPDX identifiers
usb: dwc3: gadget: Check MaxPacketSize from descriptor
usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms
usb: dwc2: Turn on uframe_sched on "amlogic" platforms
usb: dwc2: Turn on uframe_sched on "his" platforms
usb: dwc2: Turn on uframe_sched on "bcm" platforms
usb: dwc2: gadget: ISOC's starting flow improvement
usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.
usb: dwc3: core: Enable AutoRetry feature in the controller
usb: dwc3: Set default mode for dwc_usb31
usb: gadget: udc: renesas_usb3: Add register of usb role switch
usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep
usb: dwc2: Modify dwc2_readl/writel functions prototype
usb: dwc3: pci: Intel Merrifield can be host
usb: dwc3: pci: Supply device properties via driver data
arm64: dts: dwc3: description of incr burst type
usb: dwc3: Enable undefined length INCR burst type
usb: dwc3: add global soc bus configuration reg0
usb: dwc3: Describe 'wakeup_work' field of struct dwc3_pci
...

show more ...

Merge tag 'usb-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: changes for v4.19

Not a big pull request with only 37 non-merge commits, most

Merge tag 'usb-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: changes for v4.19

Not a big pull request with only 37 non-merge commits, most of which
are touching dwc2 (74% of the changes).

The most important changes are dwc2's support for uframe scheduling
and its endian-agnostic readl/writel wrappers.

From dwc3 side we have a special new glue layer for Synopsys HAPS
which will help Synopsys running FPGA validation using our upstream
driver. We also have the beginnings of dual-role support for Intel
Merrifield platform.

Apart from these, just a series of non-critical changes.

show more ...

usb: gadget: udc: renesas_usb3: Add register of usb role switch

This patch adds role switch support for R-Car SoCs into the USB 3.0
peripheral driver. Some R-Car SoCs (e.g. R-Car H3) have USB 3.0
du

usb: gadget: udc: renesas_usb3: Add register of usb role switch

This patch adds role switch support for R-Car SoCs into the USB 3.0
peripheral driver. Some R-Car SoCs (e.g. R-Car H3) have USB 3.0
dual-role device controller which has the USB 3.0 xHCI host and
Renesas USB 3.0 peripheral.

Unfortunately, the mode change register (DRD_CON) contains
the USB 3.0 peripheral controller side only. So, this renesas_usb3
driver manages the DRD_CON now. However, in peripheral mode, the host
should stop. Also the host hardware needs to reinitialize its own
registers when the mode changes from peripheral to host mode.
Otherwise, the host cannot work correctly (e.g. detect a device
as high-speed).

To achieve this reinitialization by a driver, this driver also
registers a role switch driver to manage the DRD_CON and get
a device pointer of usb 3.0 host from "companion" property of OF.
Then, when the usb role is changed, renesas_usb3_role_switch_set()
will attach/release the xhci-plat driver to reinitialize the host
hardware.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next-queued

We need a backmerge to get DP_DPCD_REV_14 before we push other
i915 changes to dinq that could break compilation.

Signed-off-by: Rodrigo Vivi <rodrigo.

Merge drm/drm-next into drm-intel-next-queued

We need a backmerge to get DP_DPCD_REV_14 before we push other
i915 changes to dinq that could break compilation.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge tag 'v4.18-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.18-rc2

Merge tag 'v4.18-rc2' into next-general

Merge to Linux 4.18-rc2 for security subsystem developers.

Merge branch 'linus' into x86/urgent

Required to queue a dependent fix.

Merge tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB and PHY updates from Greg KH:
"Here is the big USB pull request for 4.18-rc1.

Lots of stuff here, th

Merge tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB and PHY updates from Greg KH:
"Here is the big USB pull request for 4.18-rc1.

Lots of stuff here, the highlights are:

- phy driver updates and new additions

- usual set of xhci driver updates

- normal set of musb updates

- gadget driver updates and new controllers

- typec work, it's getting closer to getting fully out of the staging
portion of the tree.

- lots of minor cleanups and bugfixes.

All of these have been in linux-next for a while with no reported
issues"

* tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
Revert "xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue"
xhci: Add quirk to zero 64bit registers on Renesas PCIe controllers
xhci: Allow more than 32 quirks
usb: xhci: force all memory allocations to node
selftests: add test for USB over IP driver
USB: typec: fsusb302: no need to check return value of debugfs_create_dir()
USB: gadget: udc: s3c2410_udc: no need to check return value of debugfs_create functions
USB: gadget: udc: renesas_usb3: no need to check return value of debugfs_create functions
USB: gadget: udc: pxa27x_udc: no need to check return value of debugfs_create functions
USB: gadget: udc: gr_udc: no need to check return value of debugfs_create functions
USB: gadget: udc: bcm63xx_udc: no need to check return value of debugfs_create functions
USB: udc: atmel_usba_udc: no need to check return value of debugfs_create functions
USB: dwc3: no need to check return value of debugfs_create functions
USB: dwc2: no need to check return value of debugfs_create functions
USB: core: no need to check return value of debugfs_create functions
USB: chipidea: no need to check return value of debugfs_create functions
USB: ehci-hcd: no need to check return value of debugfs_create functions
USB: fhci-hcd: no need to check return value of debugfs_create functions
USB: fotg210-hcd: no need to check return value of debugfs_create functions
USB: imx21-hcd: no need to check return value of debugfs_create functions
...

show more ...

Merge branches 'clk-warn', 'clk-core', 'clk-spear' and 'clk-qcom-msm8998' into clk-next

* clk-warn:
clk: Print the clock name and warning cause

* clk-core:
clk: Remove clk_init_cb typedef

* cl

Merge branches 'clk-warn', 'clk-core', 'clk-spear' and 'clk-qcom-msm8998' into clk-next

* clk-warn:
clk: Print the clock name and warning cause

* clk-core:
clk: Remove clk_init_cb typedef

* clk-spear:
clk: spear: fix WDT clock definition on SPEAr600

* clk-qcom-msm8998:
clk: qcom: Add MSM8998 Global Clock Control (GCC) driver

show more ...

Merge tag 'usb-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

usb: changes for v4.18 merge window

A total of 98 non-merge commits, the biggest part being in dwc

Merge tag 'usb-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

usb: changes for v4.18 merge window

A total of 98 non-merge commits, the biggest part being in dwc3 this
time around with a large refactoring of dwc3's transfer handling code.

We also have a new driver for Aspeed virtual hub controller.

Apart from that, just a list of miscellaneous fixes all over the place.

show more ...

usb/gadget: Add driver for Aspeed SoC virtual hub

The Aspeed BMC SoCs support a "virtual hub" function. It provides some
HW support for a top-level USB2 hub behind which sit 5 gadget "ports".

This

usb/gadget: Add driver for Aspeed SoC virtual hub

The Aspeed BMC SoCs support a "virtual hub" function. It provides some
HW support for a top-level USB2 hub behind which sit 5 gadget "ports".

This driver adds support for the full functionality, emulating the
hub standard requests and exposing 5 UDC gadget drivers corresponding
to the ports.

The hub itself has HW provided dedicated EP0 and EP1 (the latter for
hub interrupts). It also has dedicated EP0s for each function. For
other endpoints, there's a pool of 15 "generic" endpoints that are
shared among the ports.

The driver relies on my previous patch adding a "dispose" EP op to
handle EP allocation between ports. EPs are allocated from the shared
pool in the UDC "match_ep" callback and assigned to the UDC instance
(added to the gadget ep_list).

When the composite driver gets unbound, the new hook will allow the UDC
to clean things up and return those EPs to the shared pool.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

show more ...