Merge tag 'v4.0-rc5' into next

Merge with the latest upstream to synchronize Synaptics changes
and bring in new infrastructure pieces.

Conflicts:
drivers/input/mouse/synaptics.c

Merge branch 'sched/urgent' into sched/core, to pick up fixes before applying new patches

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v4.0-rc5' into x86/fpu, to prevent conflicts

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v4.0-rc3' into x86/build, to refresh an older tree before applying new changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v4.0-rc3' into asoc-rt5670

Linux 4.0-rc3

Conflicts:
sound/soc/codecs/rt5670.c

Merge tag 'v4.0-rc2' into irq/core, to refresh the tree before applying new changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v4.0-rc2' into timers/core, to refresh the tree before pulling more changes

Merge tag 'v4.0-rc2' into x86/asm, to refresh the tree

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'linus' into x86/urgent, to merge dependent patch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v4.0-rc1' into perf/core, to refresh the tree

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v4.0-rc1' into x86/mm, to refresh the tree

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v4.0-rc1' into locking/core, to refresh the tree before merging new changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v4.0-rc1' into patchwork

Linux 34.0-rc1

* tag 'v4.0-rc1': (8947 commits)
Linux 4.0-rc1
autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation
procfs: fix race

Merge tag 'v4.0-rc1' into patchwork

Linux 34.0-rc1

* tag 'v4.0-rc1': (8947 commits)
Linux 4.0-rc1
autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation
procfs: fix race between symlink removals and traversals
debugfs: leave freeing a symlink body until inode eviction
Documentation/filesystems/Locking: ->get_sb() is long gone
trylock_super(): replacement for grab_super_passive()
fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)
SELinux: Use d_is_positive() rather than testing dentry->d_inode
Smack: Use d_is_positive() rather than testing dentry->d_inode
TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR()
Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode
Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb
VFS: Split DCACHE_FILE_TYPE into regular and special types
VFS: Add a fallthrough flag for marking virtual dentries
VFS: Add a whiteout dentry type
VFS: Introduce inode-getting helpers for layered/unioned fs environments
kernel: make READ_ONCE() valid on const arguments
blk-throttle: check stats_cpu before reading it from sysfs
...

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Merge tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver patches from Greg KH:
"Here's the big tty/serial driver update for 3.20-rc1. Nothing hug

Merge tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver patches from Greg KH:
"Here's the big tty/serial driver update for 3.20-rc1. Nothing huge
here, just lots of driver updates and some core tty layer fixes as
well. All have been in linux-next with no reported issues"

* tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
serial: 8250: Fix UART_BUG_TXEN workaround
serial: driver for ETRAX FS UART
tty: remove unused variable sprop
serial: of-serial: fetch line number from DT
serial: samsung: earlycon support depends on CONFIG_SERIAL_SAMSUNG_CONSOLE
tty/serial: serial8250_set_divisor() can be static
tty/serial: Add Spreadtrum sc9836-uart driver support
Documentation: DT: Add bindings for Spreadtrum SoC Platform
serial: samsung: remove redundant interrupt enabling
tty: Remove external interface for tty_set_termios()
serial: omap: Fix RTS handling
serial: 8250_omap: Use UPSTAT_AUTORTS for RTS handling
serial: core: Rework hw-assisted flow control support
tty/serial: 8250_early: Add support for PXA UARTs
tty/serial: of_serial: add support for PXA/MMP uarts
tty/serial: of_serial: add DT alias ID handling
serial: 8250: Prevent concurrent updates to shadow registers
serial: 8250: Use canary to restart console after suspend
serial: 8250: Refactor XR17V35X divisor calculation
serial: 8250: Refactor divisor programming
...

show more ...

Merge branch 'next' into for-linus

Prepare first round of input updates for 3.20.

tty: serial: men_z135_uart: Fix driver for changes in hardware

16z135 IP Core has changed so the driver needs to be updated to respect
these changes. The following changes have been made:

* Don't i

tty: serial: men_z135_uart: Fix driver for changes in hardware

16z135 IP Core has changed so the driver needs to be updated to respect
these changes. The following changes have been made:

* Don't invert the 16z135 modem status register when reading.
* Add module parameter to configure the (baud rate dependent) RX timeout.
Character timeout in seconds = (timeout_reg * baud_reg * 4)/freq_reg.
* Enable the handling of UART core's automatic flow control feature.
When AFE is active disable generation of modem status IRQs.
* Rework the handling of IRQs to be conform with newer FPGA versions and
take precautions not to miss an interrupt because of the destructive read
of the IIR register.
* Correct men_z135_handle_modem_status(), MSR is stat_reg[15:8] not
stat_reg[7:0]
* Correct calling of uart_handle_{dcd,cts}_change()
* Reset CLOCAL when CRTSCTS is set

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v3.19-rc4' into next

Merge with mainline to bring in the latest thermal and other changes.

Merge tag 'topic/i915-hda-componentized-2015-01-12' into drm-intel-next-queued

Conflicts:
drivers/gpu/drm/i915/intel_runtime_pm.c

Separate branch so that Takashi can also pull just this refactorin

Merge tag 'topic/i915-hda-componentized-2015-01-12' into drm-intel-next-queued

Conflicts:
drivers/gpu/drm/i915/intel_runtime_pm.c

Separate branch so that Takashi can also pull just this refactoring
into sound-next.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

show more ...

Merge tag 'irqchip-urgent-3.19' of git://git.infradead.org/users/jcooper/linux into irq/urgent

irqchip urgent fixes for v3.19 from Jason Cooper
- mtk-sysirq: Fix error handling
- hip04: Fix cpu ma

Merge tag 'irqchip-urgent-3.19' of git://git.infradead.org/users/jcooper/linux into irq/urgent

irqchip urgent fixes for v3.19 from Jason Cooper
- mtk-sysirq: Fix error handling
- hip04: Fix cpu map for 16bit value
- gic-v3-its: Clear a warning regarding decimal constants
- omap-intc: Fix legacy DMA regression
- atmel-aic-common: Retain priority when changing type

show more ...

Merge tag 'mvebu-fixes-3.19' of git://git.infradead.org/linux-mvebu into fixes

Pull "Fixes for 3.19" from Andrew Lunn:

Jason is taking a back seat this cycle and i'm doing all the patch
wrangling f

Merge tag 'mvebu-fixes-3.19' of git://git.infradead.org/linux-mvebu into fixes

Pull "Fixes for 3.19" from Andrew Lunn:

Jason is taking a back seat this cycle and i'm doing all the patch
wrangling for mvebu.

* tag 'mvebu-fixes-3.19' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: Fix pinctrl configuration for Armada 370 DB

Also update to Linux 3.19-rc1, which this was based on.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'tty-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
"Here's the big tty/serial driver update for 3.19-rc1.

There are

Merge tag 'tty-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
"Here's the big tty/serial driver update for 3.19-rc1.

There are a number of TTY core changes/fixes in here from Peter Hurley
that have all been teted in linux-next for a long time now. There are
also the normal serial driver updates as well, full details in the
changelog below"

* tag 'tty-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (219 commits)
serial: pxa: hold port.lock when reporting modem line changes
tty-hvsi_lib: Deletion of an unnecessary check before the function call "tty_kref_put"
tty: Deletion of unnecessary checks before two function calls
n_tty: Fix read_buf race condition, increment read_head after pushing data
serial: of-serial: add PM suspend/resume support
Revert "serial: of-serial: add PM suspend/resume support"
Revert "serial: of-serial: fix up PM ops on no_console_suspend and port type"
serial: 8250: don't attempt a trylock if in sysrq
serial: core: Add big-endian iotype
serial: samsung: use port->fifosize instead of hardcoded values
serial: samsung: prefer to use fifosize from driver data
serial: samsung: fix style problems
serial: samsung: wait for transfer completion before clock disable
serial: icom: fix error return code
serial: tegra: clean up tty-flag assignments
serial: Fix io address assign flow with Fintek PCI-to-UART Product
serial: mxs-auart: fix tx_empty against shift register
serial: mxs-auart: fix gpio change detection on interrupt
serial: mxs-auart: Fix mxs_auart_set_ldisc()
serial: 8250_dw: Use 64-bit access for OCTEON.
...

show more ...

tty: serial: men_z135_uart: Add terminating entry for men_z135_ids

The mcb_device_id table is supposed to be zero-terminated.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: stable <stable@vger.k

tty: serial: men_z135_uart: Add terminating entry for men_z135_ids

The mcb_device_id table is supposed to be zero-terminated.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge commit 'v3.17' into next

Merge tag 'v3.18-rc4' into x86/cleanups, to refresh the tree before pulling new changes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>