Merge tag 'v4.15-rc1' into next-seccomp

Linux 4.15-rc1

Merge branch 'topic/disconnect' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-rcar

Merge branch 'dts-fixes' into omap-for-v4.15/fixes-dt

Merge branch 'soc-fixes' into omap-for-v4.15/fixes

Merge tag 'v4.15-rc1' into patchwork

Linux 4.15-rc1

* tag 'v4.15-rc1': (12179 commits)
Linux 4.15-rc1
ARM: BUG if jumping to usermode address in kernel mode
m68k/macboing: Fix missed timer ca

Merge tag 'v4.15-rc1' into patchwork

Linux 4.15-rc1

* tag 'v4.15-rc1': (12179 commits)
Linux 4.15-rc1
ARM: BUG if jumping to usermode address in kernel mode
m68k/macboing: Fix missed timer callback assignment
afs: remove redundant assignment of dvnode to itself
afs: cell: Remove unnecessary code in afs_lookup_cell
afs: Fix signal handling in some file ops
afs: Fix some dentry handling in dir ops and missing key_puts
afs: Make afs_write_begin() avoid writing to a page that's being stored
sched/debug: Fix task state recording/printout
x86/decoder: Add new TEST instruction pattern
x86/PCI: Remove unused HyperTransport interrupt support
x86/umip: Fix insn_get_code_seg_params()'s return value
x86/boot/KASLR: Remove unused variable
genirq/matrix: Make - vs ?: Precedence explicit
irqchip/imgpdc: Use resource_size function on resource object
irqchip/qcom: Fix u32 comparison with value less than zero
ipvlan: Fix insufficient skb linear check for ipv6 icmp
ipvlan: Fix insufficient skb linear check for arp
geneve: only configure or fill UDP_ZERO_CSUM6_RX/TX info when CONFIG_IPV6
net: dsa: bcm_sf2: Clear IDDQ_GLOBAL_PWR bit for PHY
...

show more ...

Merge tag 'v4.15-rc1' into drm-misc-fixes

Linux 4.15-rc1

Pull in the merge window to resync. Dave didn't get his -fixes pull
landed in time, and now there's another rockchip fix pending, so
fast-fo

Merge tag 'v4.15-rc1' into drm-misc-fixes

Linux 4.15-rc1

Pull in the merge window to resync. Dave didn't get his -fixes pull
landed in time, and now there's another rockchip fix pending, so
fast-forwarding isn't possible, hence backmerge.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

show more ...

Merge tag 'for-linus-timers-conversion-final-v4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into timers/urgent

Pull the last batch of manual timer conversions from Kees Cook:

Merge tag 'for-linus-timers-conversion-final-v4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into timers/urgent

Pull the last batch of manual timer conversions from Kees Cook:

- final batch of "non trivial" timer conversions (multi-tree dependencies,
things Coccinelle couldn't handle, etc).

- treewide conversions via Coccinelle, in 4 steps:
- DEFINE_TIMER() functions converted to struct timer_list * argument
- init_timer() -> setup_timer()
- setup_timer() -> timer_setup()
- setup_timer() -> timer_setup() (with a single embedded structure)

- deprecated timer API removals (init_timer(), setup_*timer())

- finalization of new API (remove global casts)

show more ...

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
"This branch contains platform-related driver updates for ARM

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
"This branch contains platform-related driver updates for ARM and
ARM64, these are the areas that bring the changes:

New drivers:

- driver support for Renesas R-Car V3M (R8A77970)

- power management support for Amlogic GX

- a new driver for the Tegra BPMP thermal sensor

- a new bus driver for Technologic Systems NBUS

Changes for subsystems that prefer to merge through arm-soc:

- the usual updates for reset controller drivers from Philipp Zabel,
with five added drivers for SoCs in the arc, meson, socfpa,
uniphier and mediatek families

- updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
Heiner Kallweit and Lorenzo Pieralisi

Changes specific to some ARM-based SoC

- the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on
ARM as well

- several changes for power management on Broadcom SoCs

- various improvements on Qualcomm, Broadcom, Amlogic, Atmel,
Mediatek

- minor Cleanups for Samsung, TI OMAP SoCs"

[ NOTE! This doesn't work without the previous ARM SoC device-tree pull,
because the R8A77970 driver is missing a header file that came from
that pull.

The fact that this got merged afterwards only fixes it at this point,
and bisection of that driver will fail if/when you walk into the
history of that driver. - Linus ]

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits)
soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader
bus: add driver for the Technologic Systems NBUS
memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
soc: qcom: remove unused label
soc: amlogic: gx pm domain: add PM and OF dependencies
drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
dt-bindings: power: add amlogic meson power domain bindings
soc: amlogic: add Meson GX VPU Domains driver
soc: qcom: Remote filesystem memory driver
dt-binding: soc: qcom: Add binding for rmtfs memory
of: reserved_mem: Accessor for acquiring reserved_mem
of/platform: Generalize /reserved-memory handling
soc: mediatek: pwrap: fix fatal compiler error
soc: mediatek: pwrap: fix compiler errors
arm64: mediatek: cleanup message for platform selection
soc: Allow test-building of MediaTek drivers
soc: mediatek: place Kconfig for all SoC drivers under menu
soc: mediatek: pwrap: add support for MT7622 SoC
soc: mediatek: pwrap: add common way for setup CS timing extenstion
soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
..

show more ...

Merge tag 'arm-soc/for-4.15/drivers' of http://github.com/Broadcom/stblinux into next/drivers

Pull "Broadcom drivers changes for 4.15" from Florian Fainelli:

This pull requests contains Broadcom So

Merge tag 'arm-soc/for-4.15/drivers' of http://github.com/Broadcom/stblinux into next/drivers

Pull "Broadcom drivers changes for 4.15" from Florian Fainelli:

This pull requests contains Broadcom SoCs drivers updates for 4.15, please pull
the following:

- Markus adds support for the Broadcom STB DDR PHY frontend which supports
dynamic firmware loading and offers the ability to respond with DRAM refresh
rates. He also adds a proper documentation binding document for that
peripheral

- Brian adds support for S2/S3/S5 system suspend/resume modes on ARM-based SoCs
which is not new but had been lingering for a long time.

- Justin adds S2/S3 system suspend/resume modes on MIPS-based SoCs which is a
bit new newer and builds on top of the ARM-based support.

- Florian adds Device Tree binding documents for both ARM and MIPS based systems
describing the necessary nodes for S2/S3/S5 on these SoCs.

(This pull request somehow missed the 4.14 merge window and is now being sent again
for 4.15 along with build fixes from Arnd).

* tag 'arm-soc/for-4.15/drivers' of http://github.com/Broadcom/stblinux:
soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS)
dt-bindings: Document MIPS Broadcom STB power management nodes
soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)
dt-bindings: ARM: brcmstb: Update Broadcom STB Power Management binding
memory: brcmstb: Add driver for DPFE
dt-bindings: Add bindings for Broadcom STB DRAM Sensors

show more ...

soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS)

This commit adds support for the Broadcom STB S2/S3/S5 suspend
states on MIPS based SoCs.

This requires quite a lot of code in order

soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS)

This commit adds support for the Broadcom STB S2/S3/S5 suspend
states on MIPS based SoCs.

This requires quite a lot of code in order to deal with the
different HW blocks that need to be quiesced during suspend:

- DDR PHY
- DDR memory controller and arbiter
- control processor

The final steps of the suspend execute in cache and there is is a little
bit of assembly code in order to shut down the DDR PHY PLL and then go
into a wait loop until a wake-up even occurs. Conversely the resume part
involves waiting for the DDR PHY PLL to come back up and resume
executions where we left.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...