Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

Conflicts:
Documentation/feature-removal-schedule.txt
drivers/staging/bcm/headers.h
drivers/staging/brcm8

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

Conflicts:
Documentation/feature-removal-schedule.txt
drivers/staging/bcm/headers.h
drivers/staging/brcm80211/brcmfmac/dhd_linux.c
drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
drivers/staging/et131x/et131x_netdev.c
drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
drivers/staging/rtl8192e/r8192E.h
drivers/staging/usbip/userspace/src/utils.h

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (71 commits)
[SCSI] fcoe: cleanup cpu selection for incom

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (71 commits)
[SCSI] fcoe: cleanup cpu selection for incoming requests
[SCSI] fcoe: add fip retry to avoid missing critical keep alive
[SCSI] libfc: fix warn on in lport retry
[SCSI] libfc: Remove the reference to FCP packet from scsi_cmnd in case of error
[SCSI] libfc: cleanup sending SRR request
[SCSI] libfc: two minor changes in comments
[SCSI] libfc, fcoe: ignore rx frame with wrong xid info
[SCSI] libfc: release exchg cache
[SCSI] libfc: use FC_MAX_ERROR_CNT
[SCSI] fcoe: remove unused ptype field in fcoe_rcv_info
[SCSI] bnx2fc: Update copyright and bump version to 1.0.4
[SCSI] bnx2fc: Tx BDs cache in write tasks
[SCSI] bnx2fc: Do not arm CQ when there are no CQEs
[SCSI] bnx2fc: hold tgt lock when calling cmd_release
[SCSI] bnx2fc: Enable support for sequence level error recovery
[SCSI] bnx2fc: HSI changes for tape
[SCSI] bnx2fc: Handle REC_TOV error code from firmware
[SCSI] bnx2fc: REC/SRR link service request and response handling
[SCSI] bnx2fc: Support 'sequence cleanup' task
[SCSI] dh_rdac: Associate HBA and storage in rdac_controller to support partitions in storage
...

show more ...

[SCSI] bfa: Add support to store driver configuration in flash.

- Added dconf (Driver Config) BFA sub-module.
- The dconf sub-module provides interfaces and manages flash writes
to the flash DRV p

[SCSI] bfa: Add support to store driver configuration in flash.

- Added dconf (Driver Config) BFA sub-module.
- The dconf sub-module provides interfaces and manages flash writes
to the flash DRV parition.
- dconf sub-module also ensures that the whole 64K DRV partition is updated
on a flash write.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

show more ...

[SCSI] bfa: Added support to collect and reset fcport stats

- Added support to collect and reset fcport stats.
- Modified design to allow multiple requests for fcport stats.
- fcport will remember

[SCSI] bfa: Added support to collect and reset fcport stats

- Added support to collect and reset fcport stats.
- Modified design to allow multiple requests for fcport stats.
- fcport will remember the stats request in its stats_pending
queue and service each of the queued requests after receiving
a firmware response for the prior request.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

show more ...

[SCSI] bfa: Add FC-transport based Asynchronous Event Notification support.

- Added support to post vendor unique events on fc_host.
- Supports adapter, port, ioc, flash and remote port based AEN ev

[SCSI] bfa: Add FC-transport based Asynchronous Event Notification support.

- Added support to post vendor unique events on fc_host.
- Supports adapter, port, ioc, flash and remote port based AEN events.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

show more ...

Merge branch 'next' into for-linus

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

Conflicts:
Documentation/feature-removal-schedule.txt
drivers/staging/bcm/headers.h
drivers/staging/brcm8

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

Conflicts:
Documentation/feature-removal-schedule.txt
drivers/staging/bcm/headers.h
drivers/staging/brcm80211/brcmfmac/dhd_linux.c
drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
drivers/staging/brcm80211/brcmfmac/wl_iw.c
drivers/staging/et131x/et131x_netdev.c
drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
drivers/staging/rtl8192e/r8192E.h
drivers/staging/usbip/userspace/src/utils.h

show more ...

Merge branch 'master' into devel and apply fixup from Stephen Rothwell:

vfs/nfs: fixup for nfs_open_context change

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Trond Mykleb

Merge branch 'master' into devel and apply fixup from Stephen Rothwell:

vfs/nfs: fixup for nfs_open_context change

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

Merge branch 'rmobile/sdio' into rmobile-latest

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (77 commits)
[SCSI] fix crash in scsi_dispatch_cmd()
[S

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (77 commits)
[SCSI] fix crash in scsi_dispatch_cmd()
[SCSI] sr: check_events() ignore GET_EVENT when TUR says otherwise
[SCSI] bnx2i: Fixed kernel panic due to illegal usage of sc->request->cpu
[SCSI] bfa: Update the driver version to 3.0.2.1
[SCSI] bfa: Driver and BSG enhancements.
[SCSI] bfa: Added support to query PHY.
[SCSI] bfa: Added HBA diagnostics support.
[SCSI] bfa: Added support for flash configuration
[SCSI] bfa: Added support to obtain SFP info.
[SCSI] bfa: Added support for CEE info and stats query.
[SCSI] bfa: Extend BSG interface.
[SCSI] bfa: FCS bug fixes.
[SCSI] bfa: DMA memory allocation enhancement.
[SCSI] bfa: Brocade-1860 Fabric Adapter vHBA support.
[SCSI] bfa: Brocade-1860 Fabric Adapter PLL init fixes.
[SCSI] bfa: Added Fabric Assigned Address(FAA) support
[SCSI] bfa: IOC bug fixes.
[SCSI] bfa: Enable ASIC block configuration and query.
[SCSI] bnx2i: Updated copyright and bump version
[SCSI] bnx2i: Modified to skip CNIC registration if iSCSI is not supported
...

Fix up some trivial conflicts in:
- drivers/scsi/bnx2fc/{bnx2fc.h,bnx2fc_fcoe.c}:
Crazy broadcom version number conflicts
- drivers/target/tcm_fc/tfc_cmd.c
Just trivial cleanups done on adjacent lines

show more ...

Merge branches 'roccat', 'upstream' and 'wiimote' into for-linus

Merge commit 'v3.0-rc5' into sched/core

Merge reason: Move to a (much) newer base.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

[SCSI] bfa: Added support to query PHY.

- Added PHY sub-module.
- Implemented interface to obtain stats and to
read/update the fw from the PHY module.

Signed-off-by: Krishna Gudipati <kgudipat@br

[SCSI] bfa: Added support to query PHY.

- Added PHY sub-module.
- Implemented interface to obtain stats and to
read/update the fw from the PHY module.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

show more ...

[SCSI] bfa: Added HBA diagnostics support.

- Added diagnostics sub-module to BFA.
- Implemented interface to perform memtest/loopback test
and some other diagnostics tests.

Signed-off-by: Krishna

[SCSI] bfa: Added HBA diagnostics support.

- Added diagnostics sub-module to BFA.
- Implemented interface to perform memtest/loopback test
and some other diagnostics tests.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

show more ...

[SCSI] bfa: Added support for flash configuration

- Added flash sub-module.
- Implemented the interface to read/erase/update flash partition.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>

[SCSI] bfa: Added support for flash configuration

- Added flash sub-module.
- Implemented the interface to read/erase/update flash partition.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

show more ...

[SCSI] bfa: Added support to obtain SFP info.

- Added SFP sub-module to BFA.
- Added interface to collect sfp media info and sfp speed.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed

[SCSI] bfa: Added support to obtain SFP info.

- Added SFP sub-module to BFA.
- Added interface to collect sfp media info and sfp speed.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

show more ...

[SCSI] bfa: DMA memory allocation enhancement.

- Modified the design such that each BFA sub-module will provide
the amount of DMA and KVA memory needed by it and queues the
same request to the g

[SCSI] bfa: DMA memory allocation enhancement.

- Modified the design such that each BFA sub-module will provide
the amount of DMA and KVA memory needed by it and queues the
same request to the global dma and kva info queues.
- During the memory allocation we iterate over this queue to allocate
the dma and kva memory requested by sub-modules.
- The change is needed to avoid requesting the aggregate amount of memory
needed by all the BFA sub-modules as one contiguous chunk.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

show more ...

[SCSI] bfa: Brocade-1860 Fabric Adapter PLL init fixes.

- If flash controller is halted unconditionally, this results in
illegal write access to flash controller register domain. Since
flash con

[SCSI] bfa: Brocade-1860 Fabric Adapter PLL init fixes.

- If flash controller is halted unconditionally, this results in
illegal write access to flash controller register domain. Since
flash controller registers are only accessible once s_clk is started
- added logic to check for WGN status and halt flash controller only
if it is already running.
- Added check to wait for flash controller halt to be completed before
proceeding with s_clk/l_clk initializations.
- Removed unnecessary reset logic for PMM 1T memory and moved memory
initialization after flash access enable.
- Disable Brocade-1860 asic MBOX interrupt before PLL initialization.
- Remove reset enable for S_CLK/L_CLK after both PLL initializations
are complete.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

show more ...

[SCSI] bfa: Added Fabric Assigned Address(FAA) support

- Updated/added data structures and definitions to support FAA protocol.
- Modified the IOC state machine to support FAA.
- Introduced FAA feat

[SCSI] bfa: Added Fabric Assigned Address(FAA) support

- Updated/added data structures and definitions to support FAA protocol.
- Modified the IOC state machine to support FAA.
- Introduced FAA feature configuration - enable/disable/query.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

show more ...

[SCSI] bfa: Enable ASIC block configuration and query.

- Added ASIC block configuration APIs:
- to create/delete/update the physical functions
- to do adapter/port mode configuration
- to query t

[SCSI] bfa: Enable ASIC block configuration and query.

- Added ASIC block configuration APIs:
- to create/delete/update the physical functions
- to do adapter/port mode configuration
- to query the current ASIC block configuration.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

show more ...

[SCSI] bfa: Driver initialization and model description fix

- Moved FCS initialization, which internally does the im_port creation
as well as the scsi_host creation before bfa_init.

Once the bfa_

[SCSI] bfa: Driver initialization and model description fix

- Moved FCS initialization, which internally does the im_port creation
as well as the scsi_host creation before bfa_init.

Once the bfa_init is complete & successful:
- Reset the FCS base port cfg params such as pwwn/nwwn and setup fc host
params - based on the values learned during the ioc getattr request.
- Change needed to support BSG commands even on bfa init failure.
- Model description fixes for Brocade adapters.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

show more ...

[SCSI] bfa: Brocade-1860 Fabric Adapter 16Gbs support and flash controller fixes.

- Added support for 16Gbps.
- Added logic to flush pending mailbox command queue when IOC is disabled.
- Fix to Halt

[SCSI] bfa: Brocade-1860 Fabric Adapter 16Gbs support and flash controller fixes.

- Added support for 16Gbps.
- Added logic to flush pending mailbox command queue when IOC is disabled.
- Fix to Halt the flash controller during fw initialization - since
when asic blck is programmed flash controller's continuous access
blocks f/w access to flash.
- Added new asic based card types and modified IOC get card model routine.
- Added PLL init fix to do LPU reset every time we do a memory
initialization, since not doing so will cause LPU to be
uninitialized during driver load.
- Added fix to Halt flash controller before PLL initialization.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

show more ...

[SCSI] bfa: IOC and PLL init changes for Brocade-1860 Fabric Adapter.

- Introduced IOC poll mechanism which replaces current interrupt
based FW READY method.
- The timer based poll routine in IOC

[SCSI] bfa: IOC and PLL init changes for Brocade-1860 Fabric Adapter.

- Introduced IOC poll mechanism which replaces current interrupt
based FW READY method.
- The timer based poll routine in IOC will query the ioc_fwstate
register to see if there is a state change in FW, and sends the READY event.
- Bug fixes in the new asic PLL initialization.
- Added logic to handle CPE/RME queue interrupts before iocfc config done.
1. Use the queue_process flag to see if iocfc configuration is done
in INTX mode.
2. Split the MSIX handler installation in two - one for IOC intr
handler and the other for cpe/rme queue handler - and delay
assigning queue handlers until iocfc config is done in MSIX mode.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

show more ...

[SCSI] bfa: Brocade-1860 Fabric Adapter Hardware Enablement

- Added support for Brocade-1860 Fabric Adapter.
- Made changes to support single firmware image per asic type.
- Combined bfi_cbreg.h and

[SCSI] bfa: Brocade-1860 Fabric Adapter Hardware Enablement

- Added support for Brocade-1860 Fabric Adapter.
- Made changes to support single firmware image per asic type.
- Combined bfi_cbreg.h and bfi_ctreg.h defines into bfi_reg.h with
only minimal defines used by host.
- Added changes to setup CPE/RME Queue register offsets based on
firmware response.
- Removed queue register offset initializations and added register offsets
to BFI config response message.
- Added Brocade-1860 asic specific interrupt status definitions and
mailbox interfaces.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

show more ...

[SCSI] bfa: Introduce IOC event notification mechanism.

Introduced a generic event notification callback function that
receives IOC_ENABLED, IOC_DISABLED, IOC_FAILED events and notifies the
modules

[SCSI] bfa: Introduce IOC event notification mechanism.

Introduced a generic event notification callback function that
receives IOC_ENABLED, IOC_DISABLED, IOC_FAILED events and notifies the
modules registered for these events.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

show more ...