Merge tag 'regulator-hw-enable-helper' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into reset/next

regulator: Add helper to allow enable/disable in interrupt context

Add a

Merge tag 'regulator-hw-enable-helper' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into reset/next

regulator: Add helper to allow enable/disable in interrupt context

Add a helper function that enables exclusive consumers to bypass locking
and do an enable/disable from within interrupt context.

Link: https://lore.kernel.org/r/988df019-00d4-4209-8716-39e82c565bf1@sirena.org.uk
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

Merge tag 'edac_updates_for_v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras

Pull EDAC updates from Borislav Petkov:

- The AMD memory controllers data fabric version 4.5 supports

Merge tag 'edac_updates_for_v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras

Pull EDAC updates from Borislav Petkov:

- The AMD memory controllers data fabric version 4.5 supports
non-power-of-2 denormalization in the sense that certain bits of the
system physical address cannot be reconstructed from the normalized
address reported by the RAS hardware. Add support for handling such
addresses

- Switch the EDAC drivers to the new Intel CPU model defines

- The usual fixes and cleanups all over the place

* tag 'edac_updates_for_v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Add missing MODULE_DESCRIPTION() macros
EDAC/dmc520: Use devm_platform_ioremap_resource()
EDAC/igen6: Add Intel Arrow Lake-U/H SoCs support
RAS/AMD/FMPM: Use atl internal.h for INVALID_SPA
RAS/AMD/ATL: Implement DF 4.5 NP2 denormalization
RAS/AMD/ATL: Validate address map when information is gathered
RAS/AMD/ATL: Expand helpers for adding and removing base and hole
RAS/AMD/ATL: Read DRAM hole base early
RAS/AMD/ATL: Add amd_atl pr_fmt() prefix
RAS/AMD/ATL: Add a missing module description
EDAC, i10nm: make skx_common.o a separate module
EDAC/skx: Switch to new Intel CPU model defines
EDAC/sb_edac: Switch to new Intel CPU model defines
EDAC, pnd2: Switch to new Intel CPU model defines
EDAC/i10nm: Switch to new Intel CPU model defines
EDAC/ghes: Add missing newline to pr_info() statement
RAS/AMD/ATL: Add missing newline to pr_info() statement
EDAC/thunderx: Remove unused struct error_syndrome

show more ...

Merge branch 'for-6.10-fixes' into for-6.11

Merge tag 'timers-v6.11-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clocksource/event driver updates from Daniel Lezcano:

- Remove unnecessary local variables

Merge tag 'timers-v6.11-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clocksource/event driver updates from Daniel Lezcano:

- Remove unnecessary local variables initialization as they will be
initialized in the code path anyway right after on the ARM arch
timer and the ARM global timer (Li kunyu)

- Fix a race condition in the interrupt leading to a deadlock on the
SH CMT driver. Note that this fix was not tested on the platform
using this timer but the fix seems reasonable enough to be picked
confidently (Niklas Söderlund)

- Increase the rating of the gic-timer and use the configured width
clocksource register on the MIPS architecture (Jiaxun Yang)

- Add the DT bindings for the TMU on the Renesas platforms (Geert
Uytterhoeven)

- Add the DT bindings for the SOPHGO SG2002 clint on RiscV (Thomas
Bonnefille)

- Add the rtl-otto timer driver along with the DT bindings for the
Realtek platform (Chris Packham)

Link: https://lore.kernel.org/all/91cd05de-4c5d-4242-a381-3b8a4fe6a2a2@linaro.org

show more ...

spi: add devm_spi_optimize_message() helper

Merge series from David Lechner <dlechner@baylibre.com>:

In the IIO subsystem, we are finding that it is common to call
spi_optimize_message() during dri

spi: add devm_spi_optimize_message() helper

Merge series from David Lechner <dlechner@baylibre.com>:

In the IIO subsystem, we are finding that it is common to call
spi_optimize_message() during driver probe since the SPI message
doesn't change for the lifetime of the driver. This patch adds a
devm_spi_optimize_message() helper to simplify this common pattern.

show more ...

regmap: Merge up v6.10-rc4

There are fixes for kselftest build with clang which really help my CI.

regulator: Merge up v6.10-rc4

There are fixes for kselftest with clang that really help my CI.

RAS/AMD/ATL: Read DRAM hole base early

Read DRAM hole base when constructing the address map as the value will
not change during run time.

Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-

RAS/AMD/ATL: Read DRAM hole base early

Read DRAM hole base when constructing the address map as the value will
not change during run time.

Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20240606203313.51197-3-john.allen@amd.com

show more ...

RAS/AMD/ATL: Add amd_atl pr_fmt() prefix

Prefix all AMD ATL pr_* statements with "amd_atl:".

Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link:

RAS/AMD/ATL: Add amd_atl pr_fmt() prefix

Prefix all AMD ATL pr_* statements with "amd_atl:".

Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240606203313.51197-2-john.allen@amd.com

show more ...

Merge tag 'edac_urgent_for_v6.10_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras

Pull EDAC fixes from Borislav Petkov:

- Fix two issues with MI300 address translation logic

* tag 'e

Merge tag 'edac_urgent_for_v6.10_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras

Pull EDAC fixes from Borislav Petkov:

- Fix two issues with MI300 address translation logic

* tag 'edac_urgent_for_v6.10_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
RAS/AMD/ATL: Use system settings for MI300 DRAM to normalized address translation
RAS/AMD/ATL: Fix MI300 bank hash

show more ...

RAS/AMD/ATL: Use system settings for MI300 DRAM to normalized address translation

The currently used normalized address format is not applicable to all
MI300 systems. This leads to incorrect results

RAS/AMD/ATL: Use system settings for MI300 DRAM to normalized address translation

The currently used normalized address format is not applicable to all
MI300 systems. This leads to incorrect results during address
translation.

Drop the fixed layout and construct the normalized address from system
settings.

Fixes: 87a612375307 ("RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240607-mi300-dram-xl-fix-v1-2-2f11547a178c@amd.com

show more ...

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge branch 'master' into mm-stable

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <tho

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

show more ...

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configu

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configuration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catching up on 6.9-rc2

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.9-rc2 changes into drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'topic/sound-devel-6.10' into for-next

Merge tag 'asoc-fix-v6.9-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.9

A relatively large set of fixes here, the biggest piece of it is a

Merge tag 'asoc-fix-v6.9-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.9

A relatively large set of fixes here, the biggest piece of it is a
series correcting some problems with the delay reporting for Intel SOF
cards but there's a bunch of other things. Everything here is driver
specific except for a fix in the core for an issue with sign extension
handling volume controls.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get drm-misc-fixes to the state of v6.9-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'linus' into x86/boot, to resolve conflict

There's a new conflict with Linus's upstream tree, because
in the following merge conflict resolution in <asm/coco.h>:

38b334fc767e Merge t

Merge branch 'linus' into x86/boot, to resolve conflict

There's a new conflict with Linus's upstream tree, because
in the following merge conflict resolution in <asm/coco.h>:

38b334fc767e Merge tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Linus has resolved the conflicting placement of 'cc_mask' better
than the original commit:

1c811d403afd x86/sev: Fix position dependent variable references in startup code

... which was also done by an internal merge resolution:

2e5fc4786b7a Merge branch 'x86/sev' into x86/boot, to resolve conflicts and to pick up dependent tree

But Linus is right in 38b334fc767e, the 'cc_mask' declaration is sufficient
within the #ifdef CONFIG_ARCH_HAS_CC_PLATFORM block.

So instead of forcing Linus to do the same resolution again, merge in Linus's
tree and follow his conflict resolution.

Conflicts:
arch/x86/include/asm/coco.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge tag 'edac_updates_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras

Pull EDAC updates from Borislav Petkov:

- Add a FRU (Field Replaceable Unit) memory poison manager which

Merge tag 'edac_updates_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras

Pull EDAC updates from Borislav Petkov:

- Add a FRU (Field Replaceable Unit) memory poison manager which
collects and manages previously encountered hw errors in order to
save them to persistent storage across reboots. Previously recorded
errors are "replayed" upon reboot in order to poison memory which has
caused said errors in the past.

The main use case is stacked, on-chip memory which cannot simply be
replaced so poisoning faulty areas of it and thus making them
inaccessible is the only strategy to prolong its lifetime.

- Add an AMD address translation library glue which converts the
reported addresses of hw errors into system physical addresses in
order to be used by other subsystems like memory failure, for
example. Add support for MI300 accelerators to that library.

- igen6: Add support for Alder Lake-N SoC

- i10nm: Add Grand Ridge support

- The usual fixlets and cleanups

* tag 'edac_updates_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versal: Convert to platform remove callback returning void
RAS/AMD/FMPM: Fix off by one when unwinding on error
RAS/AMD/FMPM: Add debugfs interface to print record entries
RAS/AMD/FMPM: Save SPA values
RAS: Export helper to get ras_debugfs_dir
RAS/AMD/ATL: Fix bit overflow in denorm_addr_df4_np2()
RAS: Introduce a FRU memory poison manager
RAS/AMD/ATL: Add MI300 row retirement support
Documentation: Move RAS section to admin-guide
EDAC/versal: Make the bit position of injected errors configurable
EDAC/i10nm: Add Intel Grand Ridge micro-server support
EDAC/igen6: Add one more Intel Alder Lake-N SoC support
RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support
RAS/AMD/ATL: Fix array overflow in get_logical_coh_st_fabric_id_mi300()
RAS/AMD/ATL: Add MI300 support
Documentation: RAS: Add index and address translation section
EDAC/amd64: Use new AMD Address Translation Library
RAS: Introduce AMD Address Translation Library
EDAC/synopsys: Convert to devm_platform_ioremap_resource()

show more ...

Merge remote-tracking branches 'ras/edac-drivers', 'ras/edac-misc' and 'ras/edac-amd-atl' into edac-updates-for-v6.9

* ras/edac-drivers:
EDAC/i10nm: Add Intel Grand Ridge micro-server support
ED

Merge remote-tracking branches 'ras/edac-drivers', 'ras/edac-misc' and 'ras/edac-amd-atl' into edac-updates-for-v6.9

* ras/edac-drivers:
EDAC/i10nm: Add Intel Grand Ridge micro-server support
EDAC/igen6: Add one more Intel Alder Lake-N SoC support

* ras/edac-misc:
EDAC/versal: Convert to platform remove callback returning void
EDAC/versal: Make the bit position of injected errors configurable
EDAC/synopsys: Convert to devm_platform_ioremap_resource()

* ras/edac-amd-atl:
RAS/AMD/FMPM: Fix off by one when unwinding on error
RAS/AMD/FMPM: Add debugfs interface to print record entries
RAS/AMD/FMPM: Save SPA values
RAS: Export helper to get ras_debugfs_dir
RAS/AMD/ATL: Fix bit overflow in denorm_addr_df4_np2()
RAS: Introduce a FRU memory poison manager
RAS/AMD/ATL: Add MI300 row retirement support
Documentation: Move RAS section to admin-guide
RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support
RAS/AMD/ATL: Fix array overflow in get_logical_coh_st_fabric_id_mi300()
RAS/AMD/ATL: Add MI300 support
Documentation: RAS: Add index and address translation section
EDAC/amd64: Use new AMD Address Translation Library
RAS: Introduce AMD Address Translation Library

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>

show more ...

RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support

Zen-based AMD systems report DRAM ECC errors through Unified Memory
Controller (UMC) MCA banks. The value provided in MCA_ADDR i

RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support

Zen-based AMD systems report DRAM ECC errors through Unified Memory
Controller (UMC) MCA banks. The value provided in MCA_ADDR is
a "normalized" address which represents the UMC's view of its managed
memory. The normalized address must be translated to a system physical
address for software to take action.

MI300 systems, uniquely, do not provide a normalized address in MCA_ADDR
for DRAM ECC errors. Rather, the "DRAM" address is reported. This value
includes identifiers for the bank, row, column, pseudochannel and stack
of the memory location.

The DRAM address must be converted to a normalized address in order to
be further translated to a system physical address.

Add helper functions to do the DRAM to normalized translation for MI300
systems. The method is based on the fixed hardware layout of the on-chip
memory.

[ bp: Massage commit message, decapitalize some, rename function. ]

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Co-developed-by: Muralidhara M K <muralidhara.mk@amd.com>
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://lore.kernel.org/r/20240131165732.88297-1-yazen.ghannam@amd.com

show more ...

RAS/AMD/ATL: Add MI300 support

AMD MI300 systems include on-die HBM3 memory and a unique topology. And
they fall under Data Fabric version 4.5 in overall design.

Generally, topology information (ID

RAS/AMD/ATL: Add MI300 support

AMD MI300 systems include on-die HBM3 memory and a unique topology. And
they fall under Data Fabric version 4.5 in overall design.

Generally, topology information (IDs, etc.) is gathered from Data Fabric
registers. However, the unique topology for MI300 means that some
topology information is fixed in hardware and follows arbitrary
mappings. Furthermore, not all hardware instances are software-visible,
so register accesses must be adjusted.

Recognize and add helper functions for the new MI300 interleave modes.
Add lookup tables for fixed values where appropriate. Adjust how Die and
Node IDs are found and used.

Also, fix some register bitmasks that were mislabeled.

Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240128155950.1434067-1-yazen.ghannam@amd.com

show more ...