Merge branch 'master' into for-next

Sync with Linus' branch in order to be able to apply fixups
of more recent patches.

Merge tag 'v5.9-rc2' into regulator-5.9

Linux 5.9-rc2

Merge tag 'v5.9-rc2' into asoc-5.9

Linux 5.9-rc2

Merge tag 'v5.9-rc2' into drm-misc-fixes

Backmerge requested by Tomi for a fix to omap inconsistent
locking state issue, and because we need at least v5.9-rc2 now.

Signed-off-by: Maarten Lankhorst

Merge tag 'v5.9-rc2' into drm-misc-fixes

Backmerge requested by Tomi for a fix to omap inconsistent
locking state issue, and because we need at least v5.9-rc2 now.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge v5.9-rc1 into drm-misc-next

Sam needs 5.9-rc1 to have dev_err_probe in to merge some patches.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Mgerge remote-tracking branch 'torvalds/master' into perf/core

To sync headers, for instance, in this case tools/perf was ahead of
upstream till Linus merged tip/perf/core to get the
PERF_RECORD_TEX

Mgerge remote-tracking branch 'torvalds/master' into perf/core

To sync headers, for instance, in this case tools/perf was ahead of
upstream till Linus merged tip/perf/core to get the
PERF_RECORD_TEXT_POKE changes:

Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

2) Support UDP segm

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

2) Support UDP segmentation in code TSO code, from Eric Dumazet.

3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.

4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.

5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.

7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.

8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.

9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...

show more ...

Merge tag 'wireless-drivers-next-2020-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.

Merge tag 'wireless-drivers-next-2020-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.9

First set of patches for v5.9. This comes later than usual as I was
offline for two weeks. The biggest change here is moving Microchip
wilc1000 driver from staging. There was an immutable topic branch with
one commit moving the whole driver and the topic branch was pulled
both to staging-next and wireless-drivers-next. At the moment the only
reported conflict is in MAINTAINERS file, so I'm hoping the move
should go smoothly.

Other notable changes are ath11k getting 6 GHz band support and rtw88
supporting RTL8821CE. And there's also the usual fixes, API changes
and cleanups all over.

Major changes:

wilc1000

* move from drivers/staging to drivers/net/wireless/microchip

ath11k

* add 6G band support

* add spectral scan support

iwlwifi

* make FW reconfiguration quieter by not using warn level

rtw88

* add support for RTL8821CE
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'wilc1000-move-out-of-staging' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next into staging-next

This is the movement of the wilc1000 driver out of staging,

Merge branch 'wilc1000-move-out-of-staging' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next into staging-next

This is the movement of the wilc1000 driver out of staging, pulled in
here so that we do not end up doing duplicate work.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* 'wilc1000-move-out-of-staging' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next:
wilc1000: move wilc driver out of staging

show more ...

Merge branch 'wilc1000-move-out-of-staging'

This is an immutable branch shared between wireless-drivers-next and
staging-next for moving wilc1000 driver out of staging to drivers/net/wireless
direct

Merge branch 'wilc1000-move-out-of-staging'

This is an immutable branch shared between wireless-drivers-next and
staging-next for moving wilc1000 driver out of staging to drivers/net/wireless
directory.

show more ...

wilc1000: move wilc driver out of staging

WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The
WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other
processors with minima

wilc1000: move wilc driver out of staging

WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The
WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other
processors with minimal resource requirements with a simple
SPI/SDIO-to-Wi-Fi interface.

WILC1000 driver has been part of staging for few years. With
contributions from the community, it has improved significantly. Full
driver review has helped in achieving the current state.
The details for those reviews are captured in 1 & 2.

[1]. https://lore.kernel.org/linux-wireless/1537957525-11467-1-git-send-email-ajay.kathat@microchip.com/
[2]. https://lore.kernel.org/linux-wireless/1562896697-8002-1-git-send-email-ajay.kathat@microchip.com/

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

show more ...