Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git

ath.git patches for v6.5. Major changes:

ath11k

* factory test mode support

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

wifi: ath11k: fix memory leak in WMI firmware stats

Memory allocated for firmware pdev, vdev and beacon statistics
are not released during rmmod.

Fix it by calling ath11k_fw_stats_free() function b

wifi: ath11k: fix memory leak in WMI firmware stats

Memory allocated for firmware pdev, vdev and beacon statistics
are not released during rmmod.

Fix it by calling ath11k_fw_stats_free() function before hardware
unregister.

While at it, avoid calling ath11k_fw_stats_free() while processing
the firmware stats received in the WMI event because the local list
is getting spliced and reinitialised and hence there are no elements
in the list after splicing.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230606091128.14202-1-quic_adisi@quicinc.com

show more ...

wifi: ath11k: don't use %pK

According to Documentation/core-api/printk-formats.rst %pK should not be used
with printk(), so switch back to using just %p. printk() will hash the address
so addresses

wifi: ath11k: don't use %pK

According to Documentation/core-api/printk-formats.rst %pK should not be used
with printk(), so switch back to using just %p. printk() will hash the address
so addresses are not leaked to user space.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-14-kvalo@kernel.org

show more ...

wifi: ath11k: remove manual mask names from debug messages

Now that the previous patch changed ath11k_dbg() to print the debug level
there's no need to have the level in the actual message anymore.

wifi: ath11k: remove manual mask names from debug messages

Now that the previous patch changed ath11k_dbg() to print the debug level
there's no need to have the level in the actual message anymore. So remove those.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-4-kvalo@kernel.org

show more ...

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'wireless-next-2023-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.5

The second pull re

Merge tag 'wireless-next-2023-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.5

The second pull request for v6.5. We have support for three new
Realtek chipsets, all from different generations. Shows how active
Realtek development is right now, even older generations are being
worked on.

Note: We merged wireless into wireless-next to avoid complex conflicts
between the trees.

Major changes:

rtl8xxxu
- RTL8192FU support

rtw89
- RTL8851BE support

rtw88
- RTL8723DS support

ath11k
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID
Advertisement (EMA) support in AP mode

iwlwifi
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature

cfg80211/mac80211
- more Multi-Link Operation (MLO) support such as hardware restart
- fixes for a potential work/mutex deadlock and with it beginnings of
the previously discussed locking simplifications

* tag 'wireless-next-2023-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (162 commits)
wifi: rtlwifi: remove misused flag from HAL data
wifi: rtlwifi: remove unused dualmac control leftovers
wifi: rtlwifi: remove unused timer and related code
wifi: rsi: Do not set MMC_PM_KEEP_POWER in shutdown
wifi: rsi: Do not configure WoWlan in shutdown hook if not enabled
wifi: brcmfmac: Detect corner error case earlier with log
wifi: rtw89: 8852c: update RF radio A/B parameters to R63
wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (3 of 3)
wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (2 of 3)
wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (1 of 3)
wifi: rtw89: process regulatory for 6 GHz power type
wifi: rtw89: regd: update regulatory map to R64-R40
wifi: rtw89: regd: judge 6 GHz according to chip and BIOS
wifi: rtw89: refine clearing supported bands to check 2/5 GHz first
wifi: rtw89: 8851b: configure CRASH_TRIGGER feature for 8851B
wifi: rtw89: set TX power without precondition during setting channel
wifi: rtw89: debug: txpwr table access only valid page according to chip
wifi: rtw89: 8851b: enable hw_scan support
wifi: cfg80211: move scan done work to wiphy work
wifi: cfg80211: move sched scan stop to wiphy work
...
====================

Link: https://lore.kernel.org/r/87bkhohkbg.fsf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

wifi: ath11k: factory test mode support

Add support to process factory test mode commands (FTM) for calibration.
By default firmware start with NORMAL mode and to process the FTM commands
firmware n

wifi: ath11k: factory test mode support

Add support to process factory test mode commands (FTM) for calibration.
By default firmware start with NORMAL mode and to process the FTM commands
firmware needs to be restarted in FTM mode using module parameter ftm_mode.
The pre-request is all the radios should be down before starting the test.

When start command ATH11K_TM_CMD_TESTMODE_START is received, ar->state
is set to Test Mode. If the FTM command or event length is greater
than 256 bytes, it will be broken down into multiple segments and
encoded with TLV header if it is segmented commands, else it is sent
to firmware as it is.

On receiving UTF event from firmware, if it is segmented event, the driver
will wait until it receives all the segments and notify the complete
data to user application. In case the segmented sequence are missed or
lost from the firmware, driver will skip the already received partial data.

In case of unsegmented UTF event from firmware, driver notifies the
data to the user application as it comes. Applications handles
the data further.

Command to boot in ftm mode:

insmod ath11k ftm_mode=1

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Govindaraj Saminathan <quic_gsaminat@quicinc.com>
Co-developed-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230517135934.16408-4-quic_rajkbhag@quicinc.com

show more ...

Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git

ath.git patches for v6.5. Major changes:

ath11k

* Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID

Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git

ath.git patches for v6.5. Major changes:

ath11k

* Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID
Advertisement (EMA) support in AP mode

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

wifi: ath11k: Send HT fixed rate in WMI peer fixed param

Due to the firmware behavior with HT fixed rate setting,
HT fixed rate MCS with NSS > 1 are treated as NSS = 1
HT rates in the firmware and e

wifi: ath11k: Send HT fixed rate in WMI peer fixed param

Due to the firmware behavior with HT fixed rate setting,
HT fixed rate MCS with NSS > 1 are treated as NSS = 1
HT rates in the firmware and enables the HT fixed rate of
NSS = 1.

This leads to HT fixed rate is always configured for NSS = 1
even though the user sets NSS = 2 or > 1 HT fixed MCS in the
set bitrate command.

Currently HT fixed MCS is sent via WMI peer assoc command.
Fix this issue, by sending the HT fixed rate MCS in WMI peer
fixed param instead of sending in peer assoc command.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Maharaja Kennadyrajan <quic_mkenna@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230504092033.3542456-3-quic_mkenna@quicinc.com

show more ...

wifi: ath11k: Relocate the func ath11k_mac_bitrate_mask_num_ht_rates() and change hweight16 to hweight8

Relocate the function ath11k_mac_bitrate_mask_num_ht_rates() definition
to call this function

wifi: ath11k: Relocate the func ath11k_mac_bitrate_mask_num_ht_rates() and change hweight16 to hweight8

Relocate the function ath11k_mac_bitrate_mask_num_ht_rates() definition
to call this function from other functions which helps to avoid the
compilation error (function not defined).

ht_mcs[] is 1 byte array and it is enough to use hweight8() instead
of hweight16(). Hence, fixed the same.

Tested on: Compile tested only.

Signed-off-by: Maharaja Kennadyrajan <quic_mkenna@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230504092033.3542456-2-quic_mkenna@quicinc.com

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

wifi: ath11k: EMA beacon support

Add new function ath11k_mac_setup_bcn_tmpl_ema() which invokes the new
API provided by MAC80211 to retrieve EMA beacons.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.

wifi: ath11k: EMA beacon support

Add new function ath11k_mac_setup_bcn_tmpl_ema() which invokes the new
API provided by MAC80211 to retrieve EMA beacons.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230405221648.17950-8-quic_alokad@quicinc.com

show more ...

wifi: ath11k: MBSSID beacon support

- Split ath11k_mac_setup_bcn_tmpl() to move the beacon retrieval and
WMI command to a new function, ath11k_mac_setup_bcn_tmpl_legacy().
In the original functi

wifi: ath11k: MBSSID beacon support

- Split ath11k_mac_setup_bcn_tmpl() to move the beacon retrieval and
WMI command to a new function, ath11k_mac_setup_bcn_tmpl_legacy().
In the original function add checks to use the transmitting interface
when MBSSID is enabled.
- Set rsnie_present and wpaie_present fields for the non-transmitting
interfaces when MBSSID is enabled.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230405221648.17950-7-quic_alokad@quicinc.com

show more ...

wifi: ath11k: refactor vif parameter configurations

Security parameters for each non-transmitting profile can be
different when MBSSID is enabled and this information is included
in the MBSSID eleme

wifi: ath11k: refactor vif parameter configurations

Security parameters for each non-transmitting profile can be
different when MBSSID is enabled and this information is included
in the MBSSID element in the Beacon frame. Current implementation
to set rsnie_present and wpaie_present does not parse this element
hence it applies only to the transmitting interface.

Move the code to a separate function to make additions for
non-transmitting interfaces cleaner.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230405221648.17950-6-quic_alokad@quicinc.com

show more ...

wifi: ath11k: MBSSID parameter configuration in AP mode

Include MBSSID parameters in WMI vdev up operation.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: A

wifi: ath11k: MBSSID parameter configuration in AP mode

Include MBSSID parameters in WMI vdev up operation.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230405221648.17950-5-quic_alokad@quicinc.com

show more ...

wifi: ath11k: MBSSID configuration during vdev create/start

Configure multiple BSSID flags and index of the transmitting interface
in vdev create/start commands depending on the service bit
WMI_TLV_

wifi: ath11k: MBSSID configuration during vdev create/start

Configure multiple BSSID flags and index of the transmitting interface
in vdev create/start commands depending on the service bit
WMI_TLV_SERVICE_MBSS_PARAM_IN_VDEV_START_SUPPORT.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230405221648.17950-3-quic_alokad@quicinc.com

show more ...

wifi: ath11k: driver settings for MBSSID and EMA

Advertise the driver support for multiple BSSID (MBSSID) and
enhanced multi-BSSID advertisements (EMA) by setting extended
capabilities.

Configure m

wifi: ath11k: driver settings for MBSSID and EMA

Advertise the driver support for multiple BSSID (MBSSID) and
enhanced multi-BSSID advertisements (EMA) by setting extended
capabilities.

Configure mbssid_max_interfaces and ema_max_profile_periodicity
fields in structure wiphy which are used to advertise maximum number
of interfaces and profile periodicity supported by the driver.

Add new WMI fields to configure maximum vdev count supported for
MBSSID and profile periodicity in case of EMA.
Setting WMI_RSRC_CFG_FLAG2_CALC_NEXT_DTIM_COUNT_SET flag
indicates that the firmware should track and update the DTIM counts
for each non-transmitted profile.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230405221648.17950-2-quic_alokad@quicinc.com

show more ...

wifi: ath: work around false-positive stringop-overread warning

In a rare arm64 randconfig build, I got multiple warnings for ath11k
and ath12k:

In function 'ath11k_peer_assoc_h_ht',
inlined fr

wifi: ath: work around false-positive stringop-overread warning

In a rare arm64 randconfig build, I got multiple warnings for ath11k
and ath12k:

In function 'ath11k_peer_assoc_h_ht',
inlined from 'ath11k_peer_assoc_prepare' at drivers/net/wireless/ath/ath11k/mac.c:2665:2:
drivers/net/wireless/ath/ath11k/mac.c:1709:13: error: 'ath11k_peer_assoc_h_ht_masked' reading 10 bytes from a region of size 0 [-Werror=stringop-overread]
1709 | if (ath11k_peer_assoc_h_ht_masked(ht_mcs_mask))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This happens whenever gcc-13 fails to inline one of the functions
that take a fixed-length array argument but gets passed a pointer.

Change these functions to all take a regular pointer argument
instead.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230417205447.1800912-1-arnd@kernel.org

show more ...

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

wifi: ath11k: fix registration of 6Ghz-only phy without the full channel range

Because of what seems to be a typo, a 6Ghz-only phy for which the BDF
does not allow the 7115Mhz channel will fail to r

wifi: ath11k: fix registration of 6Ghz-only phy without the full channel range

Because of what seems to be a typo, a 6Ghz-only phy for which the BDF
does not allow the 7115Mhz channel will fail to register:

WARNING: CPU: 2 PID: 106 at net/wireless/core.c:907 wiphy_register+0x914/0x954
Modules linked in: ath11k_pci sbsa_gwdt
CPU: 2 PID: 106 Comm: kworker/u8:5 Not tainted 6.3.0-rc7-next-20230418-00549-g1e096a17625a-dirty #9
Hardware name: Freebox V7R Board (DT)
Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : wiphy_register+0x914/0x954
lr : ieee80211_register_hw+0x67c/0xc10
sp : ffffff800b123aa0
x29: ffffff800b123aa0 x28: 0000000000000000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000006 x24: ffffffc008d51418
x23: ffffffc008cb0838 x22: ffffff80176c2460 x21: 0000000000000168
x20: ffffff80176c0000 x19: ffffff80176c03e0 x18: 0000000000000014
x17: 00000000cbef338c x16: 00000000d2a26f21 x15: 00000000ad6bb85f
x14: 0000000000000020 x13: 0000000000000020 x12: 00000000ffffffbd
x11: 0000000000000208 x10: 00000000fffffdf7 x9 : ffffffc009394718
x8 : ffffff80176c0528 x7 : 000000007fffffff x6 : 0000000000000006
x5 : 0000000000000005 x4 : ffffff800b304284 x3 : ffffff800b304284
x2 : ffffff800b304d98 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
wiphy_register+0x914/0x954
ieee80211_register_hw+0x67c/0xc10
ath11k_mac_register+0x7c4/0xe10
ath11k_core_qmi_firmware_ready+0x1f4/0x570
ath11k_qmi_driver_event_work+0x198/0x590
process_one_work+0x1b8/0x328
worker_thread+0x6c/0x414
kthread+0x100/0x104
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
ath11k_pci 0002:01:00.0: ieee80211 registration failed: -22
ath11k_pci 0002:01:00.0: failed register the radio with mac80211: -22
ath11k_pci 0002:01:00.0: failed to create pdev core: -22

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230421145445.2612280-1-mbizon@freebox.fr

show more ...