Merge tag 'fallthrough-pseudo-keyword-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull 'fallthrough' keyword conversion from Gustavo A. R. Silva:
"A tree-wide patch t

Merge tag 'fallthrough-pseudo-keyword-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull 'fallthrough' keyword conversion from Gustavo A. R. Silva:
"A tree-wide patch that replaces tons (2484) of /* fall through */
comments, and its variants, with the new pseudo-keyword macro
fallthrough[1]. Also, remove unnecessary fall-through markings when it
is the case.

There are currently 1167 intances of this fallthrough pseudo-keyword
macro in mainline (5.9-rc2), that have been introduced over the last
couple of development cycles:

$ git grep -nw 'fallthrough;' | wc -l
1167

The global adoption of the fallthrough pseudo-keyword is something
certain to happen; so, better sooner than later. :) This will also
save everybody's time and thousands of lines of unnecessarily
repetitive changelog text.

After applying this patch on top of 5.9-rc2, we'll have a total of
3651 instances of this macro:

$ git grep -nw 'fallthrough;' | wc -l
3651

This treewide patch doesn't address ALL fall-through markings in all
subsystems at once because I have previously sent out patches for some
of such subsystems separately, and I will follow up on them; however,
this definitely contributes most of the work needed to replace all the
fall-through markings with the fallthrough pseudo-keyword macro in the
whole codebase.

I have build-tested this patch on 10 different architectures: x86_64,
i386, arm64, powerpc, s390, sparc64, sh, m68k, powerpc64 and alpha
(allyesconfig for all of them). This is in linux-next already and
kernel test robot has also helped me to successfully build-test early
versions of this patch[2][3][4][5]"

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
[2] https://lore.kernel.org/lkml/5f3cc99a.HgvOW3rH0mD0RmkM%25lkp@intel.com/
[3] https://lore.kernel.org/lkml/5f3dd1d2.l1axczH+t4hMBZ63%25lkp@intel.com/
[4] https://lore.kernel.org/lkml/5f3e977a.mwYHUIObbR4SHr0B%25lkp@intel.com/
[5] https://lore.kernel.org/lkml/5f3f9e1c.qsyb%2FaySkiXNpkO4%25lkp@intel.com/

* tag 'fallthrough-pseudo-keyword-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: Use fallthrough pseudo-keyword

show more ...

treewide: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through mar

treewide: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.9 merge window.

Merge branch 'for-next' into for-linus

Merge branch 'elan-i2c' into next

Bring in update to Elan touchpad driver to support newer touchpads with
higher resolution.

Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Fix atomicity of affinity update in the G

Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Fix atomicity of affinity update in the GIC driver
- Don't sleep in atomic when waiting for a GICv4.1 RD to respond
- Fix a couple of typos in user-visible messages

show more ...

Merge tag 'v5.8-rc3' into arm/qcom

Linux 5.8-rc3

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.

Signed-off-by: Maarten Lankhorst <maarten.la

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking
API: convert mmap_sem comments").

Signed-off-by: Jani Nikula <jani.nikula@inte

Merge drm/drm-next into drm-intel-next-queued

Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking
API: convert mmap_sem comments").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge tag 'v5.8-rc1' into regulator-5.8

Linux 5.8-rc1

Merge tag 'v5.8-rc1' into fixes

Linux 5.8-rc1

Merge v5.8-rc1 into drm-misc-fixes

Beginning a new release cycles for what will become v5.8. Updating
drm-misc-fixes accordingly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'dt/schema-cleanups' into dt/linus

Merge branch 'x86/entry' into ras/core

to fixup conflicts in arch/x86/kernel/cpu/mce/core.c so MCE specific follow
up patches can be applied without creating a horrible merge conflict
afterwards.

Merge branch 'next' into for-linus

Prepare input updates for 5.8 merge window.

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von D

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.

2) Add GSO partial support to igc, from Sasha Neftin.

3) Several cleanups and improvements to r8169 from Heiner Kallweit.

4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.

5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.

6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

8) Add sriov and vf support to hinic, from Luo bin.

9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...

show more ...

vmxnet3: allow rx flow hash ops only when rss is enabled

It makes sense to allow changes to get/set rx flow hash callback only
when rss is enabled. This patch restricts get_rss_hash_opts and
set_rss

vmxnet3: allow rx flow hash ops only when rss is enabled

It makes sense to allow changes to get/set rx flow hash callback only
when rss is enabled. This patch restricts get_rss_hash_opts and
set_rss_hash_opts methods to allow querying and configuring different
Rx flow hash configurations only when rss is enabled

Signed-off-by: Ronak Doshi <doshir@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: vmxnet3: fix possible buffer overflow caused by bad DMA value in vmxnet3_get_rss()

The value adapter->rss_conf is stored in DMA memory, and it is assigned
to rssConf, so rssConf->indTableSize c

net: vmxnet3: fix possible buffer overflow caused by bad DMA value in vmxnet3_get_rss()

The value adapter->rss_conf is stored in DMA memory, and it is assigned
to rssConf, so rssConf->indTableSize can be modified at anytime by
malicious hardware. Because rssConf->indTableSize is assigned to n,
buffer overflow may occur when the code "rssConf->indTable[n]" is
executed.

To fix this possible bug, n is checked after being used.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'for-5.8' into for-linus

Merge branch 'vmxnet3-upgrade-to-version-4'

Ronak Doshi says:

====================
vmxnet3: upgrade to version 4

vmxnet3 emulation has recently added several new features which includes
offload su

Merge branch 'vmxnet3-upgrade-to-version-4'

Ronak Doshi says:

====================
vmxnet3: upgrade to version 4

vmxnet3 emulation has recently added several new features which includes
offload support for tunnel packets, support for new commands the driver
can issue to emulation, change in descriptor fields, etc. This patch
series extends the vmxnet3 driver to leverage these new features.

Compatibility is maintained using existing vmxnet3 versioning mechanism as
follows:
- new features added to vmxnet3 emulation are associated with new vmxnet3
version viz. vmxnet3 version 4.
- emulation advertises all the versions it supports to the driver.
- during initialization, vmxnet3 driver picks the highest version number
supported by both the emulation and the driver and configures emulation
to run at that version.

In particular, following changes are introduced:

Patch 1:
This patch introduces utility macros for vmxnet3 version 4 comparison
and updates Copyright information.

Patch 2:
This patch implements get_rss_hash_opts and set_rss_hash_opts methods
to allow querying and configuring different Rx flow hash configurations
which can be used to support UDP/ESP RSS.

Patch 3:
This patch introduces segmentation and checksum offload support for
encapsulated packets. This avoids segmenting and calculating checksum
for each segment and hence gives performance boost.

Patch 4:
With all vmxnet3 version 4 changes incorporated in the vmxnet3 driver,
with this patch, the driver can configure emulation to run at vmxnet3
version 4.

Changes in v3 -> v4:
- Replaced BUG_ON() with WARN_ON_ONCE()

Changes in v2 -> v3:
- fixed get_rss_hash_opts to return correct values for udp rss

Changes in v2:
- Fixed compilation issue due to missing closed brace
- added fallthrough comment
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vmxnet3: add geneve and vxlan tunnel offload support

Vmxnet3 version 3 device supports checksum/TSO offload. Thus, vNIC to
pNIC traffic can leverage hardware checksum/TSO offloads. However,
vmxnet3

vmxnet3: add geneve and vxlan tunnel offload support

Vmxnet3 version 3 device supports checksum/TSO offload. Thus, vNIC to
pNIC traffic can leverage hardware checksum/TSO offloads. However,
vmxnet3 does not support checksum/TSO offload for Geneve/VXLAN
encapsulated packets. Thus, for a vNIC configured with an overlay, the
guest stack must first segment the inner packet, compute the inner
checksum for each segment and encapsulate each segment before
transmitting the packet via the vNIC. This results in significant
performance penalty.

This patch will enhance vmxnet3 to support Geneve/VXLAN TSO as well as
checksum offload.

Signed-off-by: Ronak Doshi <doshir@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vmxnet3: add support to get/set rx flow hash

With vmxnet3 version 4, the emulation supports multiqueue(RSS) for
UDP and ESP traffic. A guest can enable/disable RSS for UDP/ESP over
IPv4/IPv6 by issu

vmxnet3: add support to get/set rx flow hash

With vmxnet3 version 4, the emulation supports multiqueue(RSS) for
UDP and ESP traffic. A guest can enable/disable RSS for UDP/ESP over
IPv4/IPv6 by issuing commands introduced in this patch. ESP ipv6 is
not yet supported in this patch.

This patch implements get_rss_hash_opts and set_rss_hash_opts
methods to allow querying and configuring different Rx flow hash
configurations.

Signed-off-by: Ronak Doshi <doshir@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vmxnet3: prepare for version 4 changes

vmxnet3 is currently at version 3 and this patch initiates the
preparation to accommodate changes for version 4. Introduced utility
macros for vmxnet3 version

vmxnet3: prepare for version 4 changes

vmxnet3 is currently at version 3 and this patch initiates the
preparation to accommodate changes for version 4. Introduced utility
macros for vmxnet3 version 4 comparison and update Copyright
information.

Signed-off-by: Ronak Doshi <doshir@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'timers/drivers/timer-ti' into timers/drivers/next

Merge tag 'v5.6' into next

Sync up with mainline to get device tree and other changes.