Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get drm-misc-fixes to the state of v6.9-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Large effort by Eric to lower rtnl_lo

Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Large effort by Eric to lower rtnl_lock pressure and remove locks:

- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.

- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.

- Remove locks / serialization in the socket diag interface.

- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.

- Remove the dev_base_lock, depend on RCU where necessary.

- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.

- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.

- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.

- Support TCP_NOTSENT_LOWAT in MPTCP.

- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.

- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.

- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.

- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.

- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.

- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.

- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).

- Speed up scanning for expired routes by keeping a dedicated list.

- Speed up "generic" XDP by trying harder to avoid large allocations.

- Support attaching arbitrary metadata to netconsole messages.

Things we sprinkled into general kernel code:

- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).

- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).

Netfilter:

- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.

- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.

BPF:

- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.

- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.

- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.

- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.

- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.

- Add support for retrieval of cookies for perf/kprobe multi links.

- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.

- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.

Wireless:

- Add SPP (signaling and payload protected) AMSDU support.

- Support wider bandwidth OFDMA, as required for EHT operation.

Driver API:

- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.

- Define an API for querying per netdev queue statistics from
drivers.

- IPSec: account in global stats for fully offloaded sessions.

- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.

- Enable Rx hashing (RSS) on GTP protocol fields.

Misc:

- Improvements and refactoring all over networking selftests.

- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.

- Address all missing MODULE_DESCRIPTION() warnings in networking.

- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".

Drivers:

- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues

- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support

- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch

- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.

- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx

- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"

* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...

show more ...

igc: Add support for LEDs on i225/i226

Add support for LEDs on i225/i226. The LEDs can be controlled via sysfs
from user space using the netdev trigger. The LEDs are named as
igc-<bus><device>-<led>

igc: Add support for LEDs on i225/i226

Add support for LEDs on i225/i226. The LEDs can be controlled via sysfs
from user space using the netdev trigger. The LEDs are named as
igc-<bus><device>-<led> to be easily identified.

Offloading link speed and activity are supported. Other modes are simulated
in software by using on/off. Tested on Intel i225.

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240213184138.1483968-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.15 merge window.

Merge tag 'v5.13' into next

Sync up with the mainline to get the latest parport API.

Merge tag 'v5.13-rc3' into asoc-5.13

Linux 5.13-rc3

Merge drm/drm-next into drm-intel-gt-next

Pulling in -rc2 fixes and TTM changes that next upcoming patches depend
on.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge tag 'v5.13-rc2' into spi-5.13

Linux 5.13-rc2

Merge branch 'fixes-rc1' into fixes

Merge drm/drm-next into drm-intel-next

Time to get back in sync...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get v5.12 fixes. Requested for vmwgfx.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-fixes into drm-misc-fixes

Start this new release drm-misc-fixes branch

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- bpf:
- allow bpf programs calling kernel

Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets

- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks

- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)

- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)

- ipv6: segment routing: add support for IPv4 decapsulation

- icmp: add support for RFC 8335 extended PROBE messages

- inet: use bigger hash table for IP ID generation

- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original

- tcp: reorder tcp_congestion_ops for better cache locality

- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow

- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic

- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO

- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls

- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.

- allow specifing ifindex when device is moved to another namespace

- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily

- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic

- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing

Device APIs:

- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs

- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)

- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)

- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)

- dsa: improve support for sandwiched LAGs with bridge and DSA

- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support

- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver

- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames

- phy: add support for Clause-45 PHY Loopback

- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)

New hardware/drivers:

- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.

- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches

- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

- ath11k: support for QCN9074 a 802.11ax device

- Bluetooth: Broadcom BCM4330 and BMC4334

- phy: Marvell 88X2222 transceiver support

- mdio: add BCM6368 MDIO mux bus controller

- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

- mana: driver for Microsoft Azure Network Adapter (MANA)

- Actions Semi Owl Ethernet MAC

- can: driver for ETAS ES58X CAN/USB interfaces

Pure driver changes:

- add XDP support to: enetc, igc, stmmac

- add AF_XDP support to: stmmac

- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary

- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting

- ice, iavf: support flow filters, UDP Segmentation Offload

- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic

- ionic:
- implement Rx page reuse
- support HW PTP time-stamping

- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.

- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment

- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping

- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.

- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)

- mt7601u: enable TDLS support

- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...

show more ...

Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue

Tony Nguyen says:

====================
1GbE Intel Wired LAN Driver Updates 2021-03-29

This series contains upd

Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue

Tony Nguyen says:

====================
1GbE Intel Wired LAN Driver Updates 2021-03-29

This series contains updates to igc driver only.

Andre Guedes says:

Add XDP support for the igc driver. The approach implemented by this
series follows the same approach implemented in other Intel drivers as
much as possible for the sake of consistency.

The series is organized in two parts. In the first part, i.e. patches
from 1 to 4, igc_main.c and igc_ptp.c code is refactored in preparation
for landing the XDP support, which is introduced in the second part
(patches from 5 to 8).

As far as code organization is concerned, XDP-related helpers are
defined in a new file, igc_xdp.c, and are called by igc_main.c.

The features added by this series have been tested with the samples
provided in samples/bpf/: xdp1, xdp2, xdp_redirect_cpu, and
xdp_redirect_map.

Upcoming series will add support of UMEM and zero-copy features from
AF_XDP.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

igc: Add initial XDP support

Add the initial XDP support to the igc driver. For now, only XDP_PASS,
XDP_DROP, XDP_ABORTED actions are supported. Upcoming patches will add
support for the remaining X

igc: Add initial XDP support

Add the initial XDP support to the igc driver. For now, only XDP_PASS,
XDP_DROP, XDP_ABORTED actions are supported. Upcoming patches will add
support for the remaining XDP actions.

XDP configuration helpers are defined in a new file, igc_xdp.c. These
helpers are utilized in igc_main.c to implement the ndo_bpf callback.
XDP-related code that belongs to the driver's hot path is landed in
igc_main.c.

By default, the driver uses Rx buffers with 2 KB size. When XDP is
enabled, it uses larger buffers so we have enough space to accommodate
the headroom and tailroom required by XDP infrastructure. Also, the
driver doesn't support XDP functionality with frames that span over
multiple buffers so jumbo frames are not allowed for now.

The approach implemented follows the approach implemented in other Intel
drivers as much as possible for the sake of consistency across the
drivers.

Quick comment regarding igc_build_skb(): this patch doesn't touch it
because the function is never called. It seems its support is
incomplete/in progress. The function was added by commit 0507ef8a0372b
("igc: Add transmit and receive fastpath and interrupt handlers") but
ring_uses_build_skb() always return False since the IGC_RING_FLAG_RX_
BUILD_SKB_ENABLED isn't set anywhere in the driver code.

This patch has been tested with the sample app "xdp1" located in
samples/bpf/ dir.

Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.11 merge window.

Merge tag 'v5.9' into next

Sync up with mainline to bring in the latest DTS files.

Merge branch 'master' into for-next

Sync with Linus' branch in order to be able to apply fixups
of more recent patches.

Merge branch 'next' into for-linus

Prepare input updates for 5.9 merge window.

Merge branch 'for-next' into for-linus

Merge branch 'elan-i2c' into next

Bring in update to Elan touchpad driver to support newer touchpads with
higher resolution.

Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Fix atomicity of affinity update in the G

Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Fix atomicity of affinity update in the GIC driver
- Don't sleep in atomic when waiting for a GICv4.1 RD to respond
- Fix a couple of typos in user-visible messages

show more ...

Merge tag 'v5.8-rc3' into arm/qcom

Linux 5.8-rc3

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.

Signed-off-by: Maarten Lankhorst <maarten.la

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking
API: convert mmap_sem comments").

Signed-off-by: Jani Nikula <jani.nikula@inte

Merge drm/drm-next into drm-intel-next-queued

Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking
API: convert mmap_sem comments").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...