Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.

Signed-off-by: Maarten Lankhorst <maarten.lankh

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge 5.14-rc3 into driver-core-next

We need the driver-core fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.14-rc3 into char-misc-next

We need the char-misc fixes from 5.14-rc3 into here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge v5.14-rc3 into usb-next

We need the fixes in here, and this resolves a merge issue with
drivers/usb/dwc3/gadget.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Backmerge tag 'v5.14-rc3' into drm-next

Linux 5.14-rc3

Daniel said we should pull the nouveau fix from fixes in here, probably
a good plan.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'bridge-tx-fwd'

Vladimir Oltean says:

====================
Allow TX forwarding for the software bridge data path to be offloaded to capable devices

On RX, switchdev drivers have the a

Merge branch 'bridge-tx-fwd'

Vladimir Oltean says:

====================
Allow TX forwarding for the software bridge data path to be offloaded to capable devices

On RX, switchdev drivers have the ability to mark packets for the
software bridge as "already forwarded in hardware" via
skb->offload_fwd_mark. This instructs the nbp_switchdev_allowed_egress()
function to perform software forwarding of that packet only to the bridge
ports that are not in the same hardware domain as the source packet.

This series expands the concept for TX, in the sense that we can trust
the accelerator to:
(a) look up its FDB (which is more or less in sync with the software
bridge FDB) for selecting the destination ports for a packet
(b) replicate the frame in hardware in case it's a multicast/broadcast,
instead of the software bridge having to clone it and send the
clones to each net device one at a time. This reduces the bandwidth
needed between the CPU and the accelerator, as well as the CPU time
spent.

This is done by augmenting nbp_switchdev_allowed_egress() to also
exclude the bridge ports which have the tx_fwd_offload capability if the
skb has already been transmitted to one port from their hardware domain.

Even though in reality, the software bridge still technically looks up
the FDB/MDB for every frame, but all skb clones are suppressed, this
offload specifically requires that the switchdev accelerator looks up
its FDB/MDB again. It is intended to be used to inject "data plane
packets" into the hardware as opposed to "control plane packets" which
target a precise destination port.

Towards that goal, the bridge always provides the TX packets with
skb->offload_fwd_mark = true with the VLAN tag always present, so that
the accelerator can forward according to that VLAN broadcast domain.

This work is not intended to cater to switches which can inject control
plane packets to a bit mask of destination ports. I see that as a more
difficult task to accomplish with potentially less benefits (it provides
only replication offload). The reason it is more difficult is that
struct skb_buff would probably need to be extended to contain a list of
struct net_devices that the packet must be replicated to. Sending data
plane packets avoids that issue by keeping the hardware and software FDB
more or less in sync and looking it up twice.

Additionally, the ability for the software bridge to request data plane
packets to be sent brings the opportunity for "dumb switches" to support
traffic termination to/from the bridge. Such switches (DSA or otherwise)
typically only use control packets for link-local traps, and sending or
receiving a control packet is an expensive operation.

For this class of switches, this patch series makes the difference
between supporting and not supporting local IP termination through a
VLAN-aware bridge, bridging with a foreign interface, bridging with
software upper interfaces like LAG, etc. So instead of telling them
"oh, what a dumb switch you are!", we can now tell them "oh, what a
stark contrast you have between the control and data plane!".

Patches 1-3 tested on Turris MOX (3 mv88e6xxx switches in a daisy chain
topology) and a second DSA driver to be added soon. Patches 4-5 tested
only on Turris MOX.

===========================================================

Changes in v5:
- make sure the static key is decremented on bridge port unoffload
- rename functions and variables so that the "tx_fwd_offload" string is
easy to grep across the git tree
- simplify DSA core bookkeeping of the bridge_num

===========================================================

Changes in v4:

The biggest change compared to the previous series is not present in the
patches, but is rather a lack of them. Previously we were replaying
switchdev objects on the public notifier chain, but that was a mistake
in my reasoning and it was reverted for v4. Therefore, we are now
passing the notifier blocks as arguments to switchdev_bridge_port_offload()
for all drivers. This alone gets rid of 7 patches compared to v3.

Other changes are:
- Take more care for the case where mlxsw leaves a VLAN or LAG upper
that is a bridge port, make sure that switchdev_bridge_port_unoffload()
gets called for that case
- A couple of DSA bug fixes
- Add change logs for all patches
- Copy all switchdev driver maintainers on the changes relevant to them

===========================================================

Message for v3:
https://patchwork.kernel.org/project/netdevbpf/cover/20210712152142.800651-1-vladimir.oltean@nxp.com/

In this submission I have introduced a "native switchdev" driver API to
signal whether the TX forwarding offload is supported or not. This comes
after a third person has said that the macvlan offload framework used
for v2 and v1 was simply too convoluted.

This large patch set is submitted for discussion purposes (it is
provided in its entirety so it can be applied & tested on net-next).
It is only minimally tested, and yet I will not copy all switchdev
driver maintainers until we agree on the viability of this approach.

The major changes compared to v2:
- The introduction of switchdev_bridge_port_offload() and
switchdev_bridge_port_unoffload() as two major API changes from the
perspective of a switchdev driver. All drivers were converted to call
these.
- Augment switchdev_bridge_port_{,un}offload to also handle the
switchdev object replays on port join/leave.
- Augment switchdev_bridge_port_offload to also signal whether the TX
forwarding offload is supported.

===========================================================

Message for v2:
https://patchwork.kernel.org/project/netdevbpf/cover/20210703115705.1034112-1-vladimir.oltean@nxp.com/

For this series I have taken Tobias' work from here:
https://patchwork.kernel.org/project/netdevbpf/cover/20210426170411.1789186-1-tobias@waldekranz.com/
and made the following changes:
- I collected and integrated (hopefully all of) Nikolay's, Ido's and my
feedback on the bridge driver changes. Otherwise, the structure of the
bridge changes is pretty much the same as Tobias left it.
- I basically rewrote the DSA infrastructure for the data plane
forwarding offload, based on the commonalities with another switch
driver for which I implemented this feature (not submitted here)
- I adapted mv88e6xxx to use the new infrastructure, hopefully it still
works but I didn't test that
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: bridge: switchdev: allow the TX data plane forwarding to be offloaded

Allow switchdevs to forward frames from the CPU in accordance with the
bridge configuration in the same way as is done betw

net: bridge: switchdev: allow the TX data plane forwarding to be offloaded

Allow switchdevs to forward frames from the CPU in accordance with the
bridge configuration in the same way as is done between bridge
ports. This means that the bridge will only send a single skb towards
one of the ports under the switchdev's control, and expects the driver
to deliver the packet to all eligible ports in its domain.

Primarily this improves the performance of multicast flows with
multiple subscribers, as it allows the hardware to perform the frame
replication.

The basic flow between the driver and the bridge is as follows:

- When joining a bridge port, the switchdev driver calls
switchdev_bridge_port_offload() with tx_fwd_offload = true.

- The bridge sends offloadable skbs to one of the ports under the
switchdev's control using skb->offload_fwd_mark = true.

- The switchdev driver checks the skb->offload_fwd_mark field and lets
its FDB lookup select the destination port mask for this packet.

v1->v2:
- convert br_input_skb_cb::fwd_hwdoms to a plain unsigned long
- introduce a static key "br_switchdev_fwd_offload_used" to minimize the
impact of the newly introduced feature on all the setups which don't
have hardware that can make use of it
- introduce a check for nbp->flags & BR_FWD_OFFLOAD to optimize cache
line access
- reorder nbp_switchdev_frame_mark_accel() and br_handle_vlan() in
__br_forward()
- do not strip VLAN on egress if forwarding offload on VLAN-aware bridge
is being used
- propagate errors from .ndo_dfwd_add_station() if not EOPNOTSUPP

v2->v3:
- replace the solution based on .ndo_dfwd_add_station with a solution
based on switchdev_bridge_port_offload
- rename BR_FWD_OFFLOAD to BR_TX_FWD_OFFLOAD
v3->v4: rebase
v4->v5:
- make sure the static key is decremented on bridge port unoffload
- more function and variable renaming and comments for them:
br_switchdev_fwd_offload_used to br_switchdev_tx_fwd_offload
br_switchdev_accels_skb to br_switchdev_frame_uses_tx_fwd_offload
nbp_switchdev_frame_mark_tx_fwd to nbp_switchdev_frame_mark_tx_fwd_to_hwdom
nbp_switchdev_frame_mark_accel to nbp_switchdev_frame_mark_tx_fwd_offload
fwd_accel to tx_fwd_offload

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Conflicts are simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bridge-port-offload'

Vladimir Oltean says:

====================
Let switchdev drivers offload and unoffload bridge ports at their own convenience

This series introduces an explicit A

Merge branch 'bridge-port-offload'

Vladimir Oltean says:

====================
Let switchdev drivers offload and unoffload bridge ports at their own convenience

This series introduces an explicit API through which switchdev drivers
mark a bridge port as offloaded or not:
- switchdev_bridge_port_offload()
- switchdev_bridge_port_unoffload()

Currently, the bridge assumes that a port is offloaded if
dev_get_port_parent_id(dev, &ppid, recurse=true) returns something, but
that is just an assumption that breaks some use cases (like a
non-offloaded LAG interface on top of a switchdev port, bridged with
other switchdev ports).

Along with some consolidation of the bridge logic to assign a "switchdev
offloading mark" to a port (now better called a "hardware domain"), this
series allows the bridge driver side to no longer impose restrictions on
that configuration.

Right now, all switchdev drivers must be modified to use the explicit
API, but more and more logic can then be placed centrally in the bridge
and therefore ease the job of a switchdev driver writer in the future.

For example, the first thing we can hook into the explicit switchdev
offloading API calls are the switchdev object and FDB replay helpers.
So far, these have only been used by DSA in "pull" mode (where the
driver must ask for them). Adding the replay helpers to other drivers
involves a lot of repetition. But by moving the helpers inside the
bridge port offload/unoffload hook points, we can move the entire replay
process to "push" mode (where the bridge provides them automatically).

The explicit switchdev offloading API will see further extensions in the
future.

The patches were split from a larger series for easier review:
https://patchwork.kernel.org/project/netdevbpf/cover/20210718214434.3938850-1-vladimir.oltean@nxp.com/

Changes in v6:
- Make the switchdev replay helpers opt-in
- Opt out of the replay helpers for mlxsw, rocker, prestera, sparx5,
cpsw, am65-cpsw
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: bridge: move the switchdev object replay helpers to "push" mode

Starting with commit 4f2673b3a2b6 ("net: bridge: add helper to replay
port and host-joined mdb entries"), DSA has introduced some

net: bridge: move the switchdev object replay helpers to "push" mode

Starting with commit 4f2673b3a2b6 ("net: bridge: add helper to replay
port and host-joined mdb entries"), DSA has introduced some bridge
helpers that replay switchdev events (FDB/MDB/VLAN additions and
deletions) that can be lost by the switchdev drivers in a variety of
circumstances:

- an IP multicast group was host-joined on the bridge itself before any
switchdev port joined the bridge, leading to the host MDB entries
missing in the hardware database.
- during the bridge creation process, the MAC address of the bridge was
added to the FDB as an entry pointing towards the bridge device
itself, but with no switchdev ports being part of the bridge yet, this
local FDB entry would remain unknown to the switchdev hardware
database.
- a VLAN/FDB/MDB was added to a bridge port that is a LAG interface,
before any switchdev port joined that LAG, leading to the hardware
database missing those entries.
- a switchdev port left a LAG that is a bridge port, while the LAG
remained part of the bridge, and all FDB/MDB/VLAN entries remained
installed in the hardware database of the switchdev port.

Also, since commit 0d2cfbd41c4a ("net: bridge: ignore switchdev events
for LAG ports which didn't request replay"), DSA introduced a method,
based on a const void *ctx, to ensure that two switchdev ports under the
same LAG that is a bridge port do not see the same MDB/VLAN entry being
replayed twice by the bridge, once for every bridge port that joins the
LAG.

With so many ordering corner cases being possible, it seems unreasonable
to expect a switchdev driver writer to get it right from the first try.
Therefore, now that DSA has experimented with the bridge replay helpers
for a little bit, we can move the code to the bridge driver where it is
more readily available to all switchdev drivers.

To convert the switchdev object replay helpers from "pull mode" (where
the driver asks for them) to a "push mode" (where the bridge offers them
automatically), the biggest problem is that the bridge needs to be aware
when a switchdev port joins and leaves, even when the switchdev is only
indirectly a bridge port (for example when the bridge port is a LAG
upper of the switchdev).

Luckily, we already have a hook for that, in the form of the newly
introduced switchdev_bridge_port_offload() and
switchdev_bridge_port_unoffload() calls. These offer a natural place for
hooking the object addition and deletion replays.

Extend the above 2 functions with:
- pointers to the switchdev atomic notifier (for FDB replays) and the
blocking notifier (for MDB and VLAN replays).
- the "const void *ctx" argument required for drivers to be able to
disambiguate between which port is targeted, when multiple ports are
lowers of the same LAG that is a bridge port. Most of the drivers pass
NULL to this argument, except the ones that support LAG offload and have
the proper context check already in place in the switchdev blocking
notifier handler.

Also unexport the replay helpers, since nobody except the bridge calls
them directly now.

Note that:
(a) we abuse the terminology slightly, because FDB entries are not
"switchdev objects", but we count them as objects nonetheless.
With no direct way to prove it, I think they are not modeled as
switchdev objects because those can only be installed by the bridge
to the hardware (as opposed to FDB entries which can be propagated
in the other direction too). This is merely an abuse of terms, FDB
entries are replayed too, despite not being objects.
(b) the bridge does not attempt to sync port attributes to newly joined
ports, just the countable stuff (the objects). The reason for this
is simple: no universal and symmetric way to sync and unsync them is
known. For example, VLAN filtering: what to do on unsync, disable or
leave it enabled? Similarly, STP state, ageing timer, etc etc. What
a switchdev port does when it becomes standalone again is not really
up to the bridge's competence, and the driver should deal with it.
On the other hand, replaying deletions of switchdev objects can be
seen a matter of cleanup and therefore be treated by the bridge,
hence this patch.

We make the replay helpers opt-in for drivers, because they might not
bring immediate benefits for them:

- nbp_vlan_init() is called _after_ netdev_master_upper_dev_link(),
so br_vlan_replay() should not do anything for the new drivers on
which we call it. The existing drivers where there was even a slight
possibility for there to exist a VLAN on a bridge port before they
join it are already guarded against this: mlxsw and prestera deny
joining LAG interfaces that are members of a bridge.

- br_fdb_replay() should now notify of local FDB entries, but I patched
all drivers except DSA to ignore these new entries in commit
2c4eca3ef716 ("net: bridge: switchdev: include local flag in FDB
notifications"). Driver authors can lift this restriction as they
wish, and when they do, they can also opt into the FDB replay
functionality.

- br_mdb_replay() should fix a real issue which is described in commit
4f2673b3a2b6 ("net: bridge: add helper to replay port and host-joined
mdb entries"). However most drivers do not offload the
SWITCHDEV_OBJ_ID_HOST_MDB to see this issue: only cpsw and am65_cpsw
offload this switchdev object, and I don't completely understand the
way in which they offload this switchdev object anyway. So I'll leave
it up to these drivers' respective maintainers to opt into
br_mdb_replay().

So most of the drivers pass NULL notifier blocks for the replay helpers,
except:
- dpaa2-switch which was already acked/regression-tested with the
helpers enabled (and there isn't much of a downside in having them)
- ocelot which already had replay logic in "pull" mode
- DSA which already had replay logic in "pull" mode

An important observation is that the drivers which don't currently
request bridge event replays don't even have the
switchdev_bridge_port_{offload,unoffload} calls placed in proper places
right now. This was done to avoid unnecessary rework for drivers which
might never even add support for this. For driver writers who wish to
add replay support, this can be used as a tentative placement guide:
https://patchwork.kernel.org/project/netdevbpf/patch/20210720134655.892334-11-vladimir.oltean@nxp.com/

Cc: Vadym Kochan <vkochan@marvell.com>
Cc: Taras Chornyi <tchornyi@marvell.com>
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: Lars Povlsen <lars.povlsen@microchip.com>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Cc: Claudiu Manoil <claudiu.manoil@nxp.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com> # dpaa2-switch
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: bridge: switchdev: let drivers inform which bridge ports are offloaded

On reception of an skb, the bridge checks if it was marked as 'already
forwarded in hardware' (checks if skb->offload_fwd_

net: bridge: switchdev: let drivers inform which bridge ports are offloaded

On reception of an skb, the bridge checks if it was marked as 'already
forwarded in hardware' (checks if skb->offload_fwd_mark == 1), and if it
is, it assigns the source hardware domain of that skb based on the
hardware domain of the ingress port. Then during forwarding, it enforces
that the egress port must have a different hardware domain than the
ingress one (this is done in nbp_switchdev_allowed_egress).

Non-switchdev drivers don't report any physical switch id (neither
through devlink nor .ndo_get_port_parent_id), therefore the bridge
assigns them a hardware domain of 0, and packets coming from them will
always have skb->offload_fwd_mark = 0. So there aren't any restrictions.

Problems appear due to the fact that DSA would like to perform software
fallback for bonding and team interfaces that the physical switch cannot
offload.

+-- br0 ---+
/ / | \
/ / | \
/ | | bond0
/ | | / \
swp0 swp1 swp2 swp3 swp4

There, it is desirable that the presence of swp3 and swp4 under a
non-offloaded LAG does not preclude us from doing hardware bridging
beteen swp0, swp1 and swp2. The bandwidth of the CPU is often times high
enough that software bridging between {swp0,swp1,swp2} and bond0 is not
impractical.

But this creates an impossible paradox given the current way in which
port hardware domains are assigned. When the driver receives a packet
from swp0 (say, due to flooding), it must set skb->offload_fwd_mark to
something.

- If we set it to 0, then the bridge will forward it towards swp1, swp2
and bond0. But the switch has already forwarded it towards swp1 and
swp2 (not to bond0, remember, that isn't offloaded, so as far as the
switch is concerned, ports swp3 and swp4 are not looking up the FDB,
and the entire bond0 is a destination that is strictly behind the
CPU). But we don't want duplicated traffic towards swp1 and swp2, so
it's not ok to set skb->offload_fwd_mark = 0.

- If we set it to 1, then the bridge will not forward the skb towards
the ports with the same switchdev mark, i.e. not to swp1, swp2 and
bond0. Towards swp1 and swp2 that's ok, but towards bond0? It should
have forwarded the skb there.

So the real issue is that bond0 will be assigned the same hardware
domain as {swp0,swp1,swp2}, because the function that assigns hardware
domains to bridge ports, nbp_switchdev_add(), recurses through bond0's
lower interfaces until it finds something that implements devlink (calls
dev_get_port_parent_id with bool recurse = true). This is a problem
because the fact that bond0 can be offloaded by swp3 and swp4 in our
example is merely an assumption.

A solution is to give the bridge explicit hints as to what hardware
domain it should use for each port.

Currently, the bridging offload is very 'silent': a driver registers a
netdevice notifier, which is put on the netns's notifier chain, and
which sniffs around for NETDEV_CHANGEUPPER events where the upper is a
bridge, and the lower is an interface it knows about (one registered by
this driver, normally). Then, from within that notifier, it does a bunch
of stuff behind the bridge's back, without the bridge necessarily
knowing that there's somebody offloading that port. It looks like this:

ip link set swp0 master br0
|
v
br_add_if() calls netdev_master_upper_dev_link()
|
v
call_netdevice_notifiers
|
v
dsa_slave_netdevice_event
|
v
oh, hey! it's for me!
|
v
.port_bridge_join

What we do to solve the conundrum is to be less silent, and change the
switchdev drivers to present themselves to the bridge. Something like this:

ip link set swp0 master br0
|
v
br_add_if() calls netdev_master_upper_dev_link()
|
v bridge: Aye! I'll use this
call_netdevice_notifiers ^ ppid as the
| | hardware domain for
v | this port, and zero
dsa_slave_netdevice_event | if I got nothing.
| |
v |
oh, hey! it's for me! |
| |
v |
.port_bridge_join |
| |
+------------------------+
switchdev_bridge_port_offload(swp0, swp0)

Then stacked interfaces (like bond0 on top of swp3/swp4) would be
treated differently in DSA, depending on whether we can or cannot
offload them.

The offload case:

ip link set bond0 master br0
|
v
br_add_if() calls netdev_master_upper_dev_link()
|
v bridge: Aye! I'll use this
call_netdevice_notifiers ^ ppid as the
| | switchdev mark for
v | bond0.
dsa_slave_netdevice_event | Coincidentally (or not),
| | bond0 and swp0, swp1, swp2
v | all have the same switchdev
hmm, it's not quite for me, | mark now, since the ASIC
but my driver has already | is able to forward towards
called .port_lag_join | all these ports in hw.
for it, because I have |
a port with dp->lag_dev == bond0. |
| |
v |
.port_bridge_join |
for swp3 and swp4 |
| |
+------------------------+
switchdev_bridge_port_offload(bond0, swp3)
switchdev_bridge_port_offload(bond0, swp4)

And the non-offload case:

ip link set bond0 master br0
|
v
br_add_if() calls netdev_master_upper_dev_link()
|
v bridge waiting:
call_netdevice_notifiers ^ huh, switchdev_bridge_port_offload
| | wasn't called, okay, I'll use a
v | hwdom of zero for this one.
dsa_slave_netdevice_event : Then packets received on swp0 will
| : not be software-forwarded towards
v : swp1, but they will towards bond0.
it's not for me, but
bond0 is an upper of swp3
and swp4, but their dp->lag_dev
is NULL because they couldn't
offload it.

Basically we can draw the conclusion that the lowers of a bridge port
can come and go, so depending on the configuration of lowers for a
bridge port, it can dynamically toggle between offloaded and unoffloaded.
Therefore, we need an equivalent switchdev_bridge_port_unoffload too.

This patch changes the way any switchdev driver interacts with the
bridge. From now on, everybody needs to call switchdev_bridge_port_offload
and switchdev_bridge_port_unoffload, otherwise the bridge will treat the
port as non-offloaded and allow software flooding to other ports from
the same ASIC.

Note that these functions lay the ground for a more complex handshake
between switchdev drivers and the bridge in the future.

For drivers that will request a replay of the switchdev objects when
they offload and unoffload a bridge port (DSA, dpaa2-switch, ocelot), we
place the call to switchdev_bridge_port_unoffload() strategically inside
the NETDEV_PRECHANGEUPPER notifier's code path, and not inside
NETDEV_CHANGEUPPER. This is because the switchdev object replay helpers
need the netdev adjacency lists to be valid, and that is only true in
NETDEV_PRECHANGEUPPER.

Cc: Vadym Kochan <vkochan@marvell.com>
Cc: Taras Chornyi <tchornyi@marvell.com>
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: Lars Povlsen <lars.povlsen@microchip.com>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Cc: Claudiu Manoil <claudiu.manoil@nxp.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # dpaa2-switch: regression
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com> # dpaa2-switch
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> # ocelot-switch
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dpaa2-switch: refactor prechangeupper sanity checks

Make more room for some extra code in the NETDEV_PRECHANGEUPPER handler
by moving what already exists into a dedicated function.

Cc: Ioana C

net: dpaa2-switch: refactor prechangeupper sanity checks

Make more room for some extra code in the NETDEV_PRECHANGEUPPER handler
by moving what already exists into a dedicated function.

Cc: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dpaa2-switch: use extack in dpaa2_switch_port_bridge_join

We need to propagate the extack argument for
dpaa2_switch_port_bridge_join to use it in a future patch, and it looks
like there is alre

net: dpaa2-switch: use extack in dpaa2_switch_port_bridge_join

We need to propagate the extack argument for
dpaa2_switch_port_bridge_join to use it in a future patch, and it looks
like there is already an error message there which is currently printed
to the console. Move it over netlink so it is properly transmitted to
user space.

Cc: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge tag 'v5.13' into next

Sync up with the mainline to get the latest parport API.

Merge drm/drm-next into drm-intel-gt-next

Catching up with 5.14-rc1 and also preparing for a
needed common topic branch for the "Minor revid/stepping
and workaround cleanup"

Reference: https://patc

Merge drm/drm-next into drm-intel-gt-next

Catching up with 5.14-rc1 and also preparing for a
needed common topic branch for the "Minor revid/stepping
and workaround cleanup"

Reference: https://patchwork.freedesktop.org/series/92299/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catching up with 5.14-rc1

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get tree to v5.14-rc3, as requested by Daniel.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'fixes-v5.14' into fixes

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

1) Fix type of bind option flag in af_xdp, from Baruch Siach.

2) Fix use after free in bpf

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

1) Fix type of bind option flag in af_xdp, from Baruch Siach.

2) Fix use after free in bpf_xdp_link_release(), from Xuan Zhao.

3) PM refcnt imbakance in r8152, from Takashi Iwai.

4) Sign extension ug in liquidio, from Colin Ian King.

5) Mising range check in s390 bpf jit, from Colin Ian King.

6) Uninit value in caif_seqpkt_sendmsg(), from Ziyong Xuan.

7) Fix skb page recycling race, from Ilias Apalodimas.

8) Fix memory leak in tcindex_partial_destroy_work, from Pave Skripkin.

9) netrom timer sk refcnt issues, from Nguyen Dinh Phi.

10) Fix data races aroun tcp's tfo_active_disable_stamp, from Eric
Dumazet.

11) act_skbmod should only operate on ethernet packets, from Peilin Ye.

12) Fix slab out-of-bpunds in fib6_nh_flush_exceptions(),, from Psolo
Abeni.

13) Fix sparx5 dependencies, from Yajun Deng.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits)
dpaa2-switch: seed the buffer pool after allocating the swp
net: sched: cls_api: Fix the the wrong parameter
net: sparx5: fix unmet dependencies warning
net: dsa: tag_ksz: dont let the hardware process the layer 4 checksum
net: dsa: ensure linearized SKBs in case of tail taggers
ravb: Remove extra TAB
ravb: Fix a typo in comment
net: dsa: sja1105: make VID 4095 a bridge VLAN too
tcp: disable TFO blackhole logic by default
sctp: do not update transport pathmtu if SPP_PMTUD_ENABLE is not set
net: ixp46x: fix ptp build failure
ibmvnic: Remove the proper scrq flush
selftests: net: add ESP-in-UDP PMTU test
udp: check encap socket in __udp_lib_err
sctp: update active_key for asoc when old key is being replaced
r8169: Avoid duplicate sysfs entry creation error
ixgbe: Fix packet corruption due to missing DMA sync
Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()"
ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions
fsl/fman: Add fibre support
...

show more ...

dpaa2-switch: seed the buffer pool after allocating the swp

Any interraction with the buffer pool (seeding a buffer, acquire one) is
made through a software portal (SWP, a DPIO object).
There are ci

dpaa2-switch: seed the buffer pool after allocating the swp

Any interraction with the buffer pool (seeding a buffer, acquire one) is
made through a software portal (SWP, a DPIO object).
There are circumstances where the dpaa2-switch driver probes on a DPSW
before any DPIO devices have been probed. In this case, seeding of the
buffer pool will lead to a panic since no SWPs are initialized.

To fix this, seed the buffer pool after making sure that the software
portals have been probed and are ready to be used.

Fixes: 0b1b71370458 ("staging: dpaa2-switch: handle Rx path on control interface")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- BPF:
- add syscall program type and libbpf

Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect

- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)

- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage

- virtio/vsock: introduce SOCK_SEQPACKET support

- add getsocketopt to retrieve netns cookie

- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses

- ipv6: use prandom_u32() for ID generation

- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)

- icmp: add support for extended RFC 8335 PROBE (ping)

- seg6: add support for SRv6 End.DT46 behavior

- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support

- sctp: packetization Layer Path MTU Discovery (RFC 8899)

- xfrm: speed up state addition with seq set

- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler

- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report

Device APIs:

- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)

- don't require RCU read lock to be held around BPF hooks in NAPI
context

- page_pool: generic buffer recycling

New hardware/drivers:

- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)

- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices

- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches

- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)

- NXP SJA1110 Automotive Ethernet 10-port switch

- Qualcomm QCA8327 switch support (qca8k)

- Mikrotik 10/25G NIC (atl1c)

Driver changes:

- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)

- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx

- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions

- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation

- Netronome (nfp): connection tracking offload

- Intel 1GE (igc): add AF_XDP support

- Marvell DPU (octeontx2): ingress ratelimit offload

- Google vNIC (gve): new ring/descriptor format support

- Qualcomm mobile (rmnet & ipa): inline checksum offload support

- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep

- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump

- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying

- Micrel PHY (ksz886x/ksz8081): add cable test support"

* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...

show more ...

Merge branch 'bridge-replay-helpers'

Vladimir Oltean says:

====================
Cleanup for the bridge replay helpers

This patch series brings some improvements to the logic added to the
bridge an

Merge branch 'bridge-replay-helpers'

Vladimir Oltean says:

====================
Cleanup for the bridge replay helpers

This patch series brings some improvements to the logic added to the
bridge and DSA to handle LAG interfaces sandwiched between a bridge and
a DSA switch port.

br0
/ \
/ \
bond0 swp2
/ \
/ \
swp0 swp1

In particular, it ensures that the switchdev object additions and
deletions are well balanced per physical port. This is important for
future work in the area of offloading local bridge FDB entries to
hardware in the context of DSA requesting a replay of those entries at
bridge join time (this will be submitted in a future patch series).
Due to some difficulty ensuring that the deletion of local FDB entries
pointing towards the bridge device itself is notified to switchdev in
time (before the switchdev port disconnects from the bridge), this is
potentially still not the final form in which the replay helpers will
exist. I'm thinking about moving from the pull mode (in which DSA
requests the replay) to a push mode (in which the bridge initiates the
replay). Nonetheless, these preliminary changes are needed either way.

The patch series also addresses some feedback from Nikolai which is long
overdue by now (sorry).

Switchdev driver maintainers were deliberately omitted due to the
trivial nature of the driver changes (just a function prototype).

Changes in v2:
- fix build issue in patch 4 (function prototype mismatch)
- move switchdev object unsync to the NETDEV_PRECHANGEUPPER code path
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: switchdev: add a context void pointer to struct switchdev_notifier_info

In the case where the driver asks for a replay of a certain type of
event (port object or attribute) for a bridge port th

net: switchdev: add a context void pointer to struct switchdev_notifier_info

In the case where the driver asks for a replay of a certain type of
event (port object or attribute) for a bridge port that is a LAG, it may
do so because this port has just joined the LAG.

But there might already be other switchdev ports in that LAG, and it is
preferable that those preexisting switchdev ports do not act upon the
replayed event.

The solution is to add a context to switchdev events, which is NULL most
of the time (when the bridge layer initiates the call) but which can be
set to a value controlled by the switchdev driver when a replay is
requested. The driver can then check the context to figure out if all
ports within the LAG should act upon the switchdev event, or just the
ones that match the context.

We have to modify all switchdev_handle_* helper functions as well as the
prototypes in the drivers that use these helpers too, because these
helpers hide the underlying struct switchdev_notifier_info from us and
there is no way to retrieve the context otherwise.

The context structure will be populated and used in later patches.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge tag 'v5.13-rc3' into asoc-5.13

Linux 5.13-rc3

Merge drm/drm-next into drm-intel-gt-next

Pulling in -rc2 fixes and TTM changes that next upcoming patches depend
on.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>