Merge branch 'next' into for-linus

Prepare input updates for 6.2 merge window.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to update drm-misc-next-fixes for the final phase
of the release cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Catch up on 6.1-rc cycle in order to solve the intel_backlight
conflict on linux-next.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator")
which is needed for series https://patchwork.freedesktop.org/s

Merge drm/drm-next into drm-intel-gt-next

Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator")
which is needed for series https://patchwork.freedesktop.org/series/110083/ .

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge branch 'main' into zstd-next

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get v6.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: jz4752b: Capture fixes

Merge series from Siarhei Volkau <lis8215@gmail.com>:

The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly repre

ASoC: jz4752b: Capture fixes

Merge series from Siarhei Volkau <lis8215@gmail.com>:

The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly represented dB values in alsamixer, et al.
- incorrect represented Capture input selector in alsamixer
in Playback tab.
- wrong control selected as Capture Master

show more ...

Merge drm/drm-next into drm-misc-next

Let's kick-off this release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v6.1-rc1' into next

Merge with mainline to bring in the latest changes to twl4030 driver.

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Introduce and use a single page frag cache for al

Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.

- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.

- Shrink the size of the base zero-copy send structure.

- Move TCP init under a new slow / sleepable version of DO_ONCE().

BPF:

- Add BPF-specific, any-context-safe memory allocator.

- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.

- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).

- Allow targeting BPF iterators to loop through resources of one
task/thread.

- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.

- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.

- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.

- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).

- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.

- Support accessing network tunnel metadata's flags.

- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.

- Add support for writing to Netfilter's nf_conn:mark.

Protocols:

- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).

- vsock: improve support for SO_RCVLOWAT.

- SMC: support SO_REUSEPORT.

- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.

- IPSec: support collect metadata mode for xfrm interfaces.

- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.

- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).

- MPTCP: support TCP_FASTOPEN_CONNECT.

- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.

- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.

- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.

- TLS: support the Korean ARIA-GCM crypto algorithm.

- Remove DECnet support.

Driver API:

- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.

- Ethernet Power Sourcing Equipment and Power Device support.

- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.

- Support PHY rate matching - adapting between differing host-side
and link-side speeds.

- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.

- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.

- Require that flash component name used during update matches one of
the components for which version is reported by info_get().

- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.

- Support offload of TLS connections with 256 bit keys.

New hardware / drivers:

- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).

- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module

- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)

Drivers:

- CAN:
- gs_usb: HW timestamp support

- Ethernet PHYs:
- lan8814: cable diagnostics

- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit

- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support

- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz

- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips

- RealTek WiFi (rtw89):
- P2P support"

* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...

show more ...

Merge branch 'altera-tse-phylink'

Maxime Chevallier says:

====================
net: altera: tse: phylink conversion

This is V4 of a series converting the Altera TSE driver to phylink,
introducing

Merge branch 'altera-tse-phylink'

Maxime Chevallier says:

====================
net: altera: tse: phylink conversion

This is V4 of a series converting the Altera TSE driver to phylink,
introducing a new PCS driver along the way.

The Altera TSE can be built with a SGMII/1000BaseX PCS, allowing to use
SFP ports with this MAC, which is the end goal of adding phylink support
and a proper PCS driver.

The PCS itself can either be mapped in the MAC's register space, in that
case, it's accessed through 32 bits registers, with the higher 16 bits
always 0. Alternatively, it can sit on its own register space, exposing
16 bits registers, some of which ressemble the standard PHY registers.

To tackle that rework, several things needs updating, starting by the DT
binding, since we add support for a new register range for the PCS.

Hence, the first patch of the series is a conversion to YAML of the
existing binding.

Then, patch 2 does a bit of simple cleanup to the TSE driver, using nice
reverse xmas tree definitions.

Patch 3 adds the actual PCS driver, as a standalone driver. Some future
series will then reuse that PCS driver from the dwmac-socfpga driver,
which implements support for this exact PCS too, allowing to share the
code nicely.

Patch 4 is then a phylink conversion of the altera_tse driver, to use
this new PCS driver.

Finally, patch 5 updates the newly converted DT binding to support the
pcs register range.

This series contains bits and pieces for this conversion, please tell me if
you want me to send it as individual patches.

V4 Changes:
- Add missing MODULE_* macros to the TSE PCS driver

V3 Changes:
- YAML binding conversion changes and PCS addition changes thanks to
Krzysztof's reviews

V2 Changes :
- Fixed the binding after the YAML conversion
- Added a pcs_validate() callback
- Introduced a comment to justify a soft reset for the PCS
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: altera: tse: convert to phylink

Convert the Altera Triple Speed Ethernet Controller to phylink.
This controller supports MII, GMII and RGMII with its MAC, and
SGMII + 1000BaseX through a small

net: altera: tse: convert to phylink

Convert the Altera Triple Speed Ethernet Controller to phylink.
This controller supports MII, GMII and RGMII with its MAC, and
SGMII + 1000BaseX through a small embedded PCS.

The PCS itself has a register set very similar to what is found in a
typical 802.3 ethernet PHY, but this register set memory-mapped instead
of lying on an mdio bus.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.11 merge window.

Merge tag 'v5.9' into next

Sync up with mainline to bring in the latest DTS files.

Merge branch 'master' into for-next

Sync with Linus' branch in order to be able to apply fixups
of more recent patches.

Merge branch 'for-next' into for-linus

Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Fix atomicity of affinity update in the G

Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Fix atomicity of affinity update in the GIC driver
- Don't sleep in atomic when waiting for a GICv4.1 RD to respond
- Fix a couple of typos in user-visible messages

show more ...

Merge tag 'v5.8-rc3' into arm/qcom

Linux 5.8-rc3

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.

Signed-off-by: Maarten Lankhorst <maarten.la

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking
API: convert mmap_sem comments").

Signed-off-by: Jani Nikula <jani.nikula@inte

Merge drm/drm-next into drm-intel-next-queued

Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking
API: convert mmap_sem comments").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge remote-tracking branch 'torvalds/master' into perf/urgent

To get some newer headers that got out of sync with the copies in tools/
so that we can try to have the tools/perf/ build clean for v5

Merge remote-tracking branch 'torvalds/master' into perf/urgent

To get some newer headers that got out of sync with the copies in tools/
so that we can try to have the tools/perf/ build clean for v5.8 with
fewer pull requests.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'v5.8-rc1' into regulator-5.8

Linux 5.8-rc1

Merge tag 'v5.8-rc1' into fixes

Linux 5.8-rc1

Merge v5.8-rc1 into drm-misc-fixes

Beginning a new release cycles for what will become v5.8. Updating
drm-misc-fixes accordingly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>