Merge drm/drm-next into drm-misc-next

Requested, and we need v5.5-rc1 backported as our current branch is still based on v5.4.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge branch 'add-dsa-switch-support-for-ar9331'

Oleksij Rempel says:

====================
add dsa switch support for ar9331

changes v6:
- remove ag71xx changes from this patch set. It needs more

Merge branch 'add-dsa-switch-support-for-ar9331'

Oleksij Rempel says:

====================
add dsa switch support for ar9331

changes v6:
- remove ag71xx changes from this patch set. It needs more work.
- ar9331: fix register definition and add ASCII art switch documentation.

changes v6:
- rebase against net-next

changes v5:
- remote support for port5. The effort of using this port is
questionable. Currently, it is better to not use it at all, then
adding buggy support.
- remove port enable call back. There is nothing what we actually need
to enable.
- rebase it against v5.5-rc1

changes v4:
- ag71xx: ag71xx_mac_validate fix always false comparison (&& -> ||)
- tag_ar9331: use skb_pull_rcsum() instead of skb_pull().
- tag_ar9331: drop skb_set_mac_header()

changes v3:
- ag71xx: ag71xx_mac_config: ignore MLO_AN_INBAND mode. It is not
supported by HW and SW.
- ag71xx: ag71xx_mac_validate: return all supported bits on
PHY_INTERFACE_MODE_NA

changes v2:
- move Atheros AR9331 TAG format to separate patch
- use netdev_warn_once in the tag driver to reduce potential message spam
- typo fixes
- reorder tag driver alphabetically
- configure switch to maximal frame size
- use mdiobus_read/write
- fail if mdio sub node is not found
- add comment for post reset state
- remove deprecated comment about device id
- remove phy-handle option for node with fixed-link
- ag71xx: set 1G support only for GMII mode

This patch series provides dsa switch support for Atheros ar9331 WiSoC.
As side effect ag71xx needed to be ported to phylink to make the switch
driver (as well phylink based) work properly.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: add support for Atheros AR9331 built-in switch

Provide basic support for Atheros AR9331 built-in switch. So far it
works as port multiplexer without any hardware offloading support.

Revie

net: dsa: add support for Atheros AR9331 built-in switch

Provide basic support for Atheros AR9331 built-in switch. So far it
works as port multiplexer without any hardware offloading support.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Sync up with v5.5-rc1 to get the updated lock_release() API among other
things. Fix the conflict reported by Stephen Rothwell [1].

[1] http://lore.kern

Merge drm/drm-next into drm-intel-next-queued

Sync up with v5.5-rc1 to get the updated lock_release() API among other
things. Fix the conflict reported by Stephen Rothwell [1].

[1] http://lore.kernel.org/r/20191210093957.5120f717@canb.auug.org.au

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johans

Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up BPF changes we'll need.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:
"Another merge window, another pull full of stuff:

1) Support alternative names fo

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:
"Another merge window, another pull full of stuff:

1) Support alternative names for network devices, from Jiri Pirko.

2) Introduce per-netns netdev notifiers, also from Jiri Pirko.

3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
Larsen.

4) Allow compiling out the TLS TOE code, from Jakub Kicinski.

5) Add several new tracepoints to the kTLS code, also from Jakub.

6) Support set channels ethtool callback in ena driver, from Sameeh
Jubran.

7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.

8) Add XDP support to mvneta driver, from Lorenzo Bianconi.

9) Lots of netfilter hw offload fixes, cleanups and enhancements,
from Pablo Neira Ayuso.

10) PTP support for aquantia chips, from Egor Pomozov.

11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
Josh Hunt.

12) Add smart nagle to tipc, from Jon Maloy.

13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
Duvvuru.

14) Add a flow mask cache to OVS, from Tonghao Zhang.

15) Add XDP support to ice driver, from Maciej Fijalkowski.

16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.

17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.

18) Support it in stmmac driver too, from Jose Abreu.

19) Support TIPC encryption and auth, from Tuong Lien.

20) Introduce BPF trampolines, from Alexei Starovoitov.

21) Make page_pool API more numa friendly, from Saeed Mahameed.

22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.

23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
libbpf: Fix usage of u32 in userspace code
mm: Implement no-MMU variant of vmalloc_user_node_flags
slip: Fix use-after-free Read in slip_open
net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
macvlan: schedule bc_work even if error
enetc: add support Credit Based Shaper(CBS) for hardware offload
net: phy: add helpers phy_(un)lock_mdio_bus
mdio_bus: don't use managed reset-controller
ax88179_178a: add ethtool_op_get_ts_info()
mlxsw: spectrum_router: Fix use of uninitialized adjacency index
mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
bpf: Simplify __bpf_arch_text_poke poke type handling
bpf: Introduce BPF_TRACE_x helper for the tracing tests
bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
bpf, testing: Add various tail call test cases
bpf, x86: Emit patchable direct jump as tail call
bpf: Constant map key tracking for prog array pokes
bpf: Add poke dependency tracking for prog array maps
bpf: Add initial poke descriptor table for jit images
bpf: Move owner type, jited info into array auxiliary data
...

show more ...

Merge branch 'DSA-driver-for-Vitesse-Felix-switch'

Vladimir Oltean says:

====================
DSA driver for Vitesse Felix switch

This series builds upon the previous "Accomodate DSA front-end int

Merge branch 'DSA-driver-for-Vitesse-Felix-switch'

Vladimir Oltean says:

====================
DSA driver for Vitesse Felix switch

This series builds upon the previous "Accomodate DSA front-end into
Ocelot" topic and does the following:

- Reworks the Ocelot (VSC7514) driver to support one more switching core
(VSC9959), used in NPI mode. Some code which was thought to be
SoC-specific (ocelot_board.c) wasn't, and vice versa, so it is being
accordingly moved.
- Exports ocelot driver structures and functions to include/soc/mscc.
- Adds a DSA ocelot front-end for VSC9959, which is a PCI device and
uses the exported ocelot functionality for hardware configuration.
- Adds a tagger driver for the Vitesse injection/extraction DSA headers.
This is known to be compatible with at least Ocelot and Felix.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: ocelot: add driver for Felix switch family

This supports an Ethernet switching core from Vitesse / Microsemi /
Microchip (VSC9959) which is part of the Ocelot family (a brand name),
and wh

net: dsa: ocelot: add driver for Felix switch family

This supports an Ethernet switching core from Vitesse / Microsemi /
Microchip (VSC9959) which is part of the Ocelot family (a brand name),
and whose code name is Felix. The switch can be (and is) integrated on
different SoCs as a PCIe endpoint device.

The functionality is provided by the core of the Ocelot switch driver
(drivers/net/ethernet/mscc). In this regard, the current driver is an
instance of Microsemi's Ocelot core driver, with a DSA front-end. It
inherits its name from VSC9959's code name, to distinguish itself from
the switchdev ocelot driver.

The patch adds the logic for probing a PCI device and defines the
register map for the VSC9959 switch core, since it has some differences
in register addresses and bitfield mappings compared to the other Ocelot
switches (VSC7511, VSC7512, VSC7513, VSC7514).

The Felix driver declares the register map as part of the "instance
table". Currently the VSC9959 inside NXP LS1028A is the only instance,
but presumably it can support other switches in the Ocelot family, when
used in DSA mode (Linux running on the external CPU, and not on the
embedded MIPS).

In a few cases, some h/w operations have to be done differently on
VSC9959 due to missing bitfields. This is the case for the switch core
reset and init. Because for this operation Ocelot uses some bits that
are not present on Felix, the latter has to use a register from the
global registers block (GCB) instead.

Although it is a PCI driver, it relies on DT bindings for compatibility
with DSA (CPU port link, PHY library). It does not have any custom
device tree bindings, since we would like to minimize its dependency on
device tree though.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.4 merge window.

Merge branch 'for-next' into for-linus

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge remote-tracking branch 'remotes/powerpc/topic/ppc-kvm' into kvm-ppc-next

This merges in fixes for the XIVE interrupt controller which touch both
generic powerpc and PPC KVM code. To avoid mer

Merge remote-tracking branch 'remotes/powerpc/topic/ppc-kvm' into kvm-ppc-next

This merges in fixes for the XIVE interrupt controller which touch both
generic powerpc and PPC KVM code. To avoid merge conflicts, these
commits will go upstream via the powerpc tree as well as the KVM tree.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

show more ...

Merge branch 'ti-sysc-fixes' into fixes

Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent

Pull a single EFI fix for v5.3 from Ard:

- Fix mixed mode breakage in EFI config table handling for

Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent

Pull a single EFI fix for v5.3 from Ard:

- Fix mixed mode breakage in EFI config table handling for TPM.

show more ...

Merge tag 'v5.3-rc4' into next

Sync up with mainline to bring in device_property_count_u32 andother
newer APIs.

Merge tag 'v5.3-rc3' into drm-next-5.4

Linux 5.3-rc3

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge drm/drm-next into drm-intel-next-queued

Catching up with 5.3-rc*

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge branch master from git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git

Pick up the spectre documentation so the Grand Schemozzle can be added.

Merge tag 'v5.3-rc1' into regulator-5.3

Linus 5.3-rc1

Merge tag 'v5.3-rc1' into docs-next

Pull in all of the massive docs changes from elsewhere.

Merge v5.3-rc1 into drm-misc-next

Noralf needs some SPI patches in 5.3 to merge some work on tinydrm.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

Merge tag 'v5.3-rc1' into patchwork

Linus 5.3-rc1

* tag 'v5.3-rc1': (12816 commits)
Linus 5.3-rc1
iommu/amd: fix a crash in iova_magazine_free_pfns
hexagon: switch to generic version of pte a

Merge tag 'v5.3-rc1' into patchwork

Linus 5.3-rc1

* tag 'v5.3-rc1': (12816 commits)
Linus 5.3-rc1
iommu/amd: fix a crash in iova_magazine_free_pfns
hexagon: switch to generic version of pte allocation
typo fix: it's d_make_root, not d_make_inode...
dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples
dt-bindings: iio: ad7124: Fix dtc warnings in example
dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example
dt-bindings: pinctrl: aspeed: Fix AST2500 example errors
dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors
dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes
dt-bindings: Ensure child nodes are of type 'object'
x86/entry/64: Prevent clobbering of saved CR2 value
smp: Warn on function calls from softirq context
KVM: x86: Add fixed counters to PMU filter
KVM: nVMX: do not use dangling shadow VMCS after guest reset
KVM: VMX: dump VMCS on failed entry
KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed
KVM: s390: Use kvm_vcpu_wake_up in kvm_s390_vcpu_wakeup
KVM: Boost vCPUs that are delivering interrupts
KVM: selftests: Remove superfluous define from vmx.c
...

show more ...

Merge branch 'topic/hda-acomp-base' into for-next

Pull the support for AMD / Nvidia HD-audio compmonent notification

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'next' into for-linus

Prepare second round of input updates for 5.3 merge window.

Merge tag 'v5.2' into next

Sync up with mainline to resolve conflicts in iforce driver.