Merge tag 'linux-can-next-for-5.17-20220105' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2022-01-05

this

Merge tag 'linux-can-next-for-5.17-20220105' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2022-01-05

this is a pull request of 15 patches for net-next/master.

The first patch is by me and removed an unused variable from the
usb_8dev driver.

Andy Shevchenko contributes a patch for the mcp251x driver, which
removes an unneeded assignment.

Jimmy Assarsson's patch for the kvaser_usb makes use of units.h in the
assignment of frequencies.

Lad Prabhakar provides 2 patches, converting the ti_hecc and the
sja1000 driver to make use of platform_get_irq().

The 10 remaining patches are by Vincent Mailhol. First the etas_es58x
driver populates the net_device::dev_port. The next 5 patches cleanup
the handling of CAN error and CAN RTR messages of all drivers. The
remaining 4 patches enhance the CAN controller mode flag handling and
export it via netlink to user space.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

can: do not increase tx_bytes statistics for RTR frames

The actual payload length of the CAN Remote Transmission Request (RTR)
frames is always 0, i.e. no payload is transmitted on the wire.
However

can: do not increase tx_bytes statistics for RTR frames

The actual payload length of the CAN Remote Transmission Request (RTR)
frames is always 0, i.e. no payload is transmitted on the wire.
However, those RTR frames still use the DLC to indicate the length of
the requested frame.

As such, net_device_stats::tx_bytes should not be increased when
sending RTR frames.

The function can_get_echo_skb() already returns the correct length,
even for RTR frames (c.f. [1]). However, for historical reasons, the
drivers do not use can_get_echo_skb()'s return value and instead, most
of them store a temporary length (or dlc) in some local structure or
array. Using the return value of can_get_echo_skb() solves the
issue. After doing this, such length/dlc fields become unused and so
this patch does the adequate cleaning when needed.

This patch fixes all the CAN drivers.

Finally, can_get_echo_skb() is decorated with the __must_check
attribute in order to force future drivers to correctly use its return
value (else the compiler would emit a warning).

[1] commit ed3320cec279 ("can: dev: __can_get_echo_skb():
fix real payload length return value for RTR frames")

Link: https://lore.kernel.org/all/20211207121531.42941-6-mailhol.vincent@wanadoo.fr
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Yasushi SHOJI <yashi@spacecubics.com>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
[mkl: add conversion for grcan]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: do not increase rx_bytes statistics for RTR frames

The actual payload length of the CAN Remote Transmission Request (RTR)
frames is always 0, i.e. no payload is transmitted on the wire.
However

can: do not increase rx_bytes statistics for RTR frames

The actual payload length of the CAN Remote Transmission Request (RTR)
frames is always 0, i.e. no payload is transmitted on the wire.
However, those RTR frames still use the DLC to indicate the length of
the requested frame.

As such, net_device_stats::rx_bytes should not be increased for the
RTR frames.

This patch fixes all the CAN drivers.

Link: https://lore.kernel.org/all/20211207121531.42941-5-mailhol.vincent@wanadoo.fr
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Yasushi SHOJI <yashi@spacecubics.com>
Cc: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Cc: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: do not increase rx statistics when generating a CAN rx error message frame

The CAN error message frames (i.e. error skb) are an interface
specific to socket CAN. The payload of the CAN error me

can: do not increase rx statistics when generating a CAN rx error message frame

The CAN error message frames (i.e. error skb) are an interface
specific to socket CAN. The payload of the CAN error message frames
does not correspond to any actual data sent on the wire. Only an error
flag and a delimiter are transmitted when an error occurs (c.f. ISO
11898-1 section 10.4.4.2 "Error flag").

For this reason, it makes no sense to increment the rx_packets and
rx_bytes fields of struct net_device_stats because no actual payload
were transmitted on the wire.

This patch fixes all the CAN drivers.

Link: https://lore.kernel.org/all/20211207121531.42941-2-mailhol.vincent@wanadoo.fr
CC: Marc Kleine-Budde <mkl@pengutronix.de>
CC: Nicolas Ferre <nicolas.ferre@microchip.com>
CC: Alexandre Belloni <alexandre.belloni@bootlin.com>
CC: Ludovic Desroches <ludovic.desroches@microchip.com>
CC: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
CC: Maxime Ripard <mripard@kernel.org>
CC: Chen-Yu Tsai <wens@csie.org>
CC: Jernej Skrabec <jernej.skrabec@gmail.com>
CC: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
CC: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
CC: Michal Simek <michal.simek@xilinx.com>
CC: Stephane Grosjean <s.grosjean@peak-system.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.15 merge window.

Merge tag 'v5.13' into next

Sync up with the mainline to get the latest parport API.

Merge tag 'v5.13-rc3' into asoc-5.13

Linux 5.13-rc3

Merge drm/drm-next into drm-intel-gt-next

Pulling in -rc2 fixes and TTM changes that next upcoming patches depend
on.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge tag 'v5.13-rc2' into spi-5.13

Linux 5.13-rc2

Merge branch 'fixes-rc1' into fixes

Merge drm/drm-next into drm-intel-next

Time to get back in sync...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get v5.12 fixes. Requested for vmwgfx.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-fixes into drm-misc-fixes

Start this new release drm-misc-fixes branch

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'next' into for-linus

Prepare input updates for 5.13 merge window.

Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- bpf:
- allow bpf programs calling kernel

Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets

- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks

- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)

- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)

- ipv6: segment routing: add support for IPv4 decapsulation

- icmp: add support for RFC 8335 extended PROBE messages

- inet: use bigger hash table for IP ID generation

- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original

- tcp: reorder tcp_congestion_ops for better cache locality

- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow

- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic

- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO

- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls

- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.

- allow specifing ifindex when device is moved to another namespace

- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily

- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic

- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing

Device APIs:

- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs

- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)

- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)

- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)

- dsa: improve support for sandwiched LAGs with bridge and DSA

- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support

- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver

- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames

- phy: add support for Clause-45 PHY Loopback

- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)

New hardware/drivers:

- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.

- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches

- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

- ath11k: support for QCN9074 a 802.11ax device

- Bluetooth: Broadcom BCM4330 and BMC4334

- phy: Marvell 88X2222 transceiver support

- mdio: add BCM6368 MDIO mux bus controller

- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

- mana: driver for Microsoft Azure Network Adapter (MANA)

- Actions Semi Owl Ethernet MAC

- can: driver for ETAS ES58X CAN/USB interfaces

Pure driver changes:

- add XDP support to: enetc, igc, stmmac

- add AF_XDP support to: stmmac

- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary

- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting

- ice, iavf: support flow filters, UDP Segmentation Offload

- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic

- ionic:
- implement Rx page reuse
- support HW PTP time-stamping

- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.

- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment

- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping

- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.

- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)

- mt7601u: enable TDLS support

- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...

show more ...

Merge tag 'v5.12-rc7' into ecryptfs/next

Required to pick up idmapped mount changes which changed some function
parameters.

Merge tag 'linux-can-next-for-5.13-20210330' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2021-03-30

this

Merge tag 'linux-can-next-for-5.13-20210330' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2021-03-30

this is a pull request of 39 patches for net-next/master.

The first two patches update the MAINTAINERS file. One is by me and
removes Dan Murphy from the from m_can and tcan4x5x. The other one is
by Pankaj Sharma and updates the maintainership of the m-can mmio
driver.

The next three patches are by me and update the CAN echo skb handling.

Vincent Mailhol provides 5 patches where Transmitter Delay
Compensation is added CAN bittiming calculation is cleaned up.

The next patch is by me and adds a missing HAS_IOMEM to the grcan
driver.

Michal Simek's patch for the xilinx driver add dev_err_probe()
support.

Arnd Bergmann's patch for the ucan driver fixes a compiler warning.

Stephane Grosjean provides 3 patches for the peak USB drivers, which
add ethtool set_phys_id and CAN one-shot mode.

Xulin Sun's patch removes a not needed return check in the m-can
driver. Torin Cooper-Bennun provides 3 patches for the m-can driver
that add rx-offload support to ensure that skbs are sent from softirq
context. Wan Jiabing's patch for the tcan4x5x driver removes a
duplicate include.

The next 6 patches are by me and target the mcp251xfd driver. They add
devcoredump support, simplify the UINC handling, and add HW timestamp
support.

The remaining 12 patches target the c_can driver. The first 6 are by
me and do generic checkpatch related cleanup work. Dario Binacchi's
patches bring some cleanups and increase the number of usable message
objects from 16 to 64.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

can: dev: can_free_echo_skb(): extend to return can frame length

In order to implement byte queue limits (bql) in CAN drivers, the
length of the CAN frame needs to be passed into the networking stac

can: dev: can_free_echo_skb(): extend to return can frame length

In order to implement byte queue limits (bql) in CAN drivers, the
length of the CAN frame needs to be passed into the networking stack
even if the transmission failed for some reason.

To avoid to calculate this length twice, extend can_free_echo_skb() to
return that value. Convert all users of this function, too.

This patch is the natural extension of commit:

| 9420e1d495e2 ("can: dev: can_get_echo_skb(): extend to return can
| frame length")

Link: https://lore.kernel.org/r/20210319142700.305648-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

Merge tag 'v5.12-rc4' into next

Sync up with the mainline to bring in newest APIs.

Merge drm/drm-next into drm-misc-next

Noralf needs some patches in 5.12-rc3, and we've been delaying the 5.12
merge due to the swap issue so it looks like a good time.

Signed-off-by: Maxime Ripard

Merge drm/drm-next into drm-misc-next

Noralf needs some patches in 5.12-rc3, and we've been delaying the 5.12
merge due to the swap issue so it looks like a good time.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

show more ...

Merge tag 'irqchip-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- More compatible strings for the Ingenic

Merge tag 'irqchip-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- More compatible strings for the Ingenic irqchip (introducing the
JZ4760B SoC)
- Select GENERIC_IRQ_MULTI_HANDLER on the ARM ep93xx platform
- Drop all GENERIC_IRQ_MULTI_HANDLER selections from the irqchip
Kconfig, now relying on the architecture to get it right
- Drop the debugfs_file field from struct irq_domain, now that
debugfs can track things on its own

show more ...

Merge drm/drm-next into drm-intel-next

Sync up with upstream.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'fixes-rc2' into fixes

Merge remote-tracking branch 'net/master'

Merge branch 'next' into for-linus

Prepare input updates for 5.12 merge window.