Merge tag 'v5.10-rc1' into asoc-5.10

Linux 5.10-rc1

Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

- Add redirect_neigh() BPF packet redirect helper, allowing

Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.

Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).

- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.

- Allow more than 255 IPv4 multicast interfaces.

- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.

- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.

- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.

- Allow more calls to same peer in RxRPC.

- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.

- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.

- Add TC actions for implementing MPLS L2 VPNs.

- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.

- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.

- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.

- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.

- Support sleepable BPF programs, initially targeting LSM and tracing.

- Add bpf_d_path() helper for returning full path for given 'struct
path'.

- Make bpf_tail_call compatible with bpf-to-bpf calls.

- Allow BPF programs to call map_update_elem on sockmaps.

- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).

- Support listing and getting information about bpf_links via the bpf
syscall.

- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).

- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.

- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).

- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.

- Add XDP support for Intel's igb driver.

- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.

- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.

- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.

- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.

- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.

- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.

- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.

- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.

- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.

- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...

show more ...

Merge branch 'master' into for-next

Sync with Linus' branch in order to be able to apply fixups
of more recent patches.

Merge branch 'Move-MDIO-drivers-into-their-own-directory'

Andrew Lunn says:

====================
Move MDIO drivers into their own directory

The phy subdirectory is getting cluttered. It has both P

Merge branch 'Move-MDIO-drivers-into-their-own-directory'

Andrew Lunn says:

====================
Move MDIO drivers into their own directory

The phy subdirectory is getting cluttered. It has both PHY drivers and
MDIO drivers, plus a stray switch driver. Soon more PCS drivers are
likely to appear.

Move MDIO and PCS drivers into new directories. This requires fixing
up the xgene driver which uses a relative include path.

v2:
Move the subdirs to drivers/net, rather than drivers/net/phy.

v3:
Add subdirectories under include/linux for mdio and pcs

v4:
there->their
include path fix
No new kconfig prompts
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: mdio: Move MDIO drivers into a new subdirectory

Move all the MDIO drivers and multiplexers into drivers/net/mdio. The
mdio core is however left in the phy directory, due to mutual
dependencies

net: mdio: Move MDIO drivers into a new subdirectory

Move all the MDIO drivers and multiplexers into drivers/net/mdio. The
mdio core is however left in the phy directory, due to mutual
dependencies between the MDIO core and the PHY core.

Take this opportunity to sort the Kconfig based on the menuconfig
strings, and move the multiplexers to the end with a separating
comment.

v2:
Fix typo in commit message

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: pcs: Move XPCS into new PCS subdirectory

Create drivers/net/pcs and move the Synopsys DesignWare XPCS into the
new directory. Move the header file into a subdirectory
include/linux/pcs

Start a

net: pcs: Move XPCS into new PCS subdirectory

Create drivers/net/pcs and move the Synopsys DesignWare XPCS into the
new directory. Move the header file into a subdirectory
include/linux/pcs

Start a naming convention of all PCS files use the prefix pcs-, and
rename the XPCS files to fit.

v2:
Add include/linux/pcs

v4:
Fix include path in stmmac.
Remove PCS_DEVICES to avoid new prompts

Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.9 merge window.

Merge branch 'elan-i2c' into next

Bring in update to Elan touchpad driver to support newer touchpads with
higher resolution.

Merge branch 'next' into for-linus

Prepare input updates for 5.8 merge window.

Merge branch 'for-5.8' into for-linus

Merge branch 'timers/drivers/timer-ti' into timers/drivers/next

Merge tag 'v5.6' into next

Sync up with mainline to get device tree and other changes.

Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu

Pull RCU updates from Paul McKenney:

1. Miscellaneous fixes.
2. kfree_rcu() updates.

Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu

Pull RCU updates from Paul McKenney:

1. Miscellaneous fixes.
2. kfree_rcu() updates.
3. Remove scheduler locking restriction
4. RCU-tasks update, including addition of RCU Tasks Trace for
BPF use and RCU Tasks Rude. (This branch is on top of #3 due
to overlap of changed code.)
5. RCU CPU stall warning updates.
6. Torture-test updates.

show more ...

Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core

Pull EFI changes for v5.8 from Ard Biesheuvel:

"- preliminary changes for RISC-V
- add support for setti

Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core

Pull EFI changes for v5.8 from Ard Biesheuvel:

"- preliminary changes for RISC-V
- add support for setting the resolution on the EFI framebuffer
- simplify kernel image loading for arm64
- Move .bss into .data via the linker script instead of relying on symbol
annotations.
- Get rid of __pure getters to access global variables
- Clean up the config table matching arrays"

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'topic/nhlt' into for-next

Merge NHLT init cleanup.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'tegra-for-5.7-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into asoc-5.7

ASoC: tegra: Fixes for v5.7-rc3

This contains a couple of fixes that are needed to properly

Merge tag 'tegra-for-5.7-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into asoc-5.7

ASoC: tegra: Fixes for v5.7-rc3

This contains a couple of fixes that are needed to properly reconfigure
the audio clocks on older Tegra devices.

show more ...

Merge branch 'fixes-v5.7' into fixes

Merge drm/drm-next into drm-misc-next

Backmerging required to pull topic/phy-compliance.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next-queued

Backmerging in order to pull "topic/phy-compliance".

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge v5.7-rc1 into drm-misc-fixes

Start the new drm-misc-fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh

Resolve these conflicts:

arch/x86/Kconfig
arch/x86/kernel/Makefile

Do a minor "evil merge" to move the KCSAN entry up a

Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh

Resolve these conflicts:

arch/x86/Kconfig
arch/x86/kernel/Makefile

Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines
in the Kconfig to reduce the probability of future conflicts.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'for-5.7/appleir' into for-linus

- small code cleanups in hid-appleir from Lucas Tanure

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:
"Highlights:

1) Fix the iwlwifi regression, from Johannes Berg.

2) Support BSS

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:
"Highlights:

1) Fix the iwlwifi regression, from Johannes Berg.

2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.

3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.

4) Add TTL decrement action to openvswitch, from Matteo Croce.

5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.

6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.

7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.

8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.

9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.

10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.

11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.

12) Support bcmgenet on ACPI, from Jeremy Linton.

13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.

14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.

15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.

16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.

17) Offload FIFO qdisc in mlxsw, from Petr Machata.

18) Support UDP sockets in sockmap, from Lorenz Bauer.

19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.

20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.

21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.

22) Add support for hw offload of MACSEC, from Antoine Tenart.

23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.

24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.

25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...

show more ...

Merge branch 'x86/kdump' into locking/kcsan, to resolve conflicts

Conflicts:
arch/x86/purgatory/Makefile

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'net-introduce-Qualcomm-IPA-driver'

Alex Elder says:

====================
net: introduce Qualcomm IPA driver (UPDATED)

This series presents the driver for the Qualcomm IP Accelerator

Merge branch 'net-introduce-Qualcomm-IPA-driver'

Alex Elder says:

====================
net: introduce Qualcomm IPA driver (UPDATED)

This series presents the driver for the Qualcomm IP Accelerator (IPA).

This is version 2 of this updated series. It includes the following
small changes since the previous version:
- Now based on net-next instead of v5.6-rc
- Config option now named CONFIG_QCOM_IPA
- Some minor cleanup in the GSI code
- Small change to replenish logic
- No longer depends on remoteproc bug fixes
What follows is the basically same explanation as was posted previously.

-Alex

I have posted earlier versions of this code previously, but it has
undergone quite a bit of development since the last time, so rather
than calling it "version 3" I'm just treating it as a new series
(indicating it's been updated in this message). The fast/data path
is the same as before. But the driver now (nearly) supports a
second platform, its transaction handling has been generalized
and improved, and modem activities are now handled in a more
unified way.

This series is available (based on net-next in branch "ipa_updated-v2"
in this git repository:
https://git.linaro.org/people/alex.elder/linux.git

The branch depends on other one other small patch that I sent out
for review earlier.
https://lore.kernel.org/lkml/20200306042302.17602-1-elder@linaro.org/

I want to address some of the discussion that arose last time.

First, there was the WWAN discussion. Here's the history:
- This was last posted nine months ago.
- Reviewers at that time favored developing a new WWAN subsystem that
would be used for managing devices like this. And the suggestion
was to not accept this driver until that could be developed.
- Along the way, Apple acquired much of Intel's modem business.
And as a result, the generic framework became less pressing.
- I did participate in the WWAN subsystem design however, and
although it went dormant for a while it's been resurrected:
https://lore.kernel.org/netdev/20200225100053.16385-1-johannes@sipsolutions.net/
- Unfortunately the proposed WWAN design was not an easy fit
with Qualcomm's integrated modem interfaces. Given that
rmnet is a supported link type for in the upstream "iproute2"
package (more on this below), I have opted not to integrate
with any WWAN subsystem.

So in summary, this driver does not integrate with a generic WWAN
framework. And I'd like it to be accepted upstream despite that.

Next, Arnd Bergmann had some concerns about flow control. (Note:
some of my discussions with Arnd about this were offline.) The
overall architecture here also involves the "rmnet" driver:
drivers/net/ethernet/qualcomm/rmnet

The rmnet driver presents a network device for use. It connects
with another network device presented, by the IPA driver. The
rmnet driver wraps (and unwraps) packets transferred to (and from)
the IPA driver with QMAP headers.

---------------
| rmnet_data0 | <-- "real" netdev
---------------
|| }- QMAP spoken here
--------------
| rmnet_ipa0 | <-- also netdev, transporting QMAP packets
--------------
||
--------------
( IPA hardware )
--------------

Arnd's concern was that the rmnet_data0 network device does not
have the benefit of information about the state of the underlying
IPA hardware in order to be effective in controlling TX flow.
The feared result is over-buffering of TX packets (bufferbloat).
I began working on some simple experiments to see whether (or how
much) his concern was warranted. But it turned out that completing
these experiments was much more work than had been hoped.

The rmnet driver is present in the upstream kernel. There is also
support for the rmnet link type in the upstream "ip" user space
command in the "iproute2" package. Changing the layering of rmnet
over IPA likely involves deprecating the rmnet driver and its
support in "iproute2". I would really rather not go down that
path.

There is precedent for this sort of layering of network devices
(L2TP, VLAN). And any architecture like this would suffer the
issues Arnd mentioned; the problem is not limited to rmnet and IPA.
I do think this is a problem worth solving, but the prudent thing
to do might be to try to solve it more generally.

So to summarize on this issue, this driver does not attempt to
change the way the rmnet and IPA drivers work together. And even
though I think Arnd's concerns warrant more investigation, I'd like
this driver to to be accepted upstream without any change to this
architecture.

Finally, a more technical description for the series, and some
acknowledgements to some people who contributed to it.

The IPA is a component present in some Qualcomm SoCs that allows
network functions such as aggregation, filtering, routing, and NAT
to be performed without active involvement of the main application
processor (AP).

In this initial patch series these advanced features are not
implemented. The IPA driver simply provides a network interface
that makes the modem's LTE network available in Linux. This initial
series supports only the Qualcomm SDM845 SoC. The Qualcomm SC7180
SoC is partially supported, and support for other platforms will
follow.

This code is derived from a driver developed by Qualcomm. A version
of the original source can be seen here:
https://source.codeaurora.org/quic/la/kernel/msm-4.9/tree
in the "drivers/platform/msm/ipa" directory. Many were involved in
developing this, but the following individuals deserve explicit
acknowledgement for their substantial contributions:

Abhishek Choubey
Ady Abraham
Chaitanya Pratapa
David Arinzon
Ghanim Fodi
Gidon Studinski
Ravi Gummadidala
Shihuan Liu
Skylar Chang
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...