Merge v4.4-rc1 into MTD development

Sync up with the upstream development.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Merge branch 'x15-audio-fixes' into omap-for-v4.4/fixes

Merge tag 'staging-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
"Here's the big staging driver update for 4.4-rc1. If you were

Merge tag 'staging-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
"Here's the big staging driver update for 4.4-rc1. If you were
disappointed for 4.3-rc1 that we didn't contribute enough changesets,
you should be happy with this pull request of over 2400 patches.

But overall we removed more lines of code than we added, which is nice
to see. Full details in the shortlog.

All of these have been in linux-next for a while"

Greg, I've never been disappointed in how few commits Staging
contributes to the kernel.. Never.

* tag 'staging-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (2431 commits)
Staging: rtl8192u: ieee80211: added missing blank lines
Staging: rtl8192u: ieee80211: removed unnecessary braces
Staging: rtl8192u: ieee80211: corrected block comments
Staging: rtl8192u: ieee80211: corrected indent
Staging: rtl8192u: ieee80211: added missing spaces after if
Staging: rtl8192u: ieee80211: added missing space around '='
Staging: rtl8192u: ieee80211: fixed position of else statements
Staging: rtl8192u: ieee80211: fixed open brace positions
staging: rdma: ipath: Remove unneeded vairable.
staging: rtl8188eu: pwrGrpCnt variable removed in store_pwrindex_offset function
staging: rtl8188eu: new variable for hal_data->MCSTxPowerLevelOriginalOffset[pwrGrpCnt] in store_pwrindex_offset function
staging: rtl8188eu: checkpatch fixes: 'Avoid CamelCase' in hal/bb_cfg.c
staging: rtl8188eu: checkpatch fixes: line over 80 characters splited into two parts
staging: rtl8188eu: checkpatch fixes: alignment should match open parenthesis
staging: rtl8188eu: checkpatch fixes: unnecessary parentheses removed in hal/bb_cfg.c
staging: rtl8188eu: checkpatch fixes: spaces preferred around that '|' in hal/bb_cfg.c
staging: rtl8188eu: operator = replaced by += in loop increment
staging: rtl8188eu: occurrence of the 5 GHz code marked
staging: rtl8188eu: increment placed into for loop header
staging: rtl8188eu: while loop replaced by for loop in rtw_restruct_wmm_ie
...

show more ...

Merge branch 'next' into for-linus

Prepare first round of input updates for 4.3 merge window.

Merge tag 'iio-for-4.4b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new drivers, functionality and cleanups for IIO in the 4.4 cycle

Merge tag 'iio-for-4.4b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new drivers, functionality and cleanups for IIO in the 4.4 cycle.

Core stuff
* adjust resistance documentation to allow for output devices.

New device support:
* bmc150
- split the i2c driver up into a core and i2c_regmap part including regmap
conversion.
- add spi support.
* mcp4531 digitial potentiometer driver.
* Measurement Specialties set of drivers with a core library module providing
common functionality. Note that the htu21 has a driver in hwmon, but the
view from that side was that, given the range of devices the same silicon
turns up in are not all typical hwmon material, that driver would be
deprecated in favour of this new support.
- ms8607 temperature, pressure and humidty sensor
- ms5637 temperature and pressure sensor
- htu21 temperature and humidity sensor
- tsys02d temperature sensor
- tsys01 temperature sensor

Cleanups
* tree wide.
- squish cases where irq 0 is still considered valid.
* apds9960
- sparse endian warning cleanups by making endianness explicit.
* ad5504
- leave group naming to the core.
* ad7746
- cleanup comment style.
- drop an unnecessary bit of dev_info
- add some appropriate uses of the BIT macro.
* ad799x
- leave group naming to the core.
* hdc100x - introduced this cycle,.
- fix a wrong offset value.
* lidar
- add missing MODULE_DEVICE_TABLE for dt.
* max1363
- leave sysfs group naming to the core.
* m62332 got the Harmut treatment and as ever he found a 'few' bits the
rest of us had missed!
- Share scale and offset attributes across channels.
- Shutdown the device on driver remove
- Use ARRAY_SIZE rather than a hard coded count for channels.
- Return more directly in the write_raw callback dropping a local variable
along the way.
- a few style issues
- move to reading the regulator voltage for each use allowing for dynamic
regulators. This is a common feature across drivers so we might end
up with more fixes throughout the tree for this.
* mlx96014 - introduced this cycle.
- fixed up a spot of error handling.
* vz89x - introduced this cycle.
- work around a hardware quirk.

show more ...

Merge branch 'x86/urgent' into core/efi, to pick up a pending EFI fix

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge remote-tracking branch 'net-next/master' into mac80211-next

Merge net-next to get some driver changes that patches depend
on (in order to avoid conflicts).

Signed-off-by: Johannes Berg <johan

Merge remote-tracking branch 'net-next/master' into mac80211-next

Merge net-next to get some driver changes that patches depend
on (in order to avoid conflicts).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-fix-rt5645

iio: remove gpio interrupt probing from drivers that use a single interrupt

Commit 845c877009cf014b ("i2c / ACPI: Assign IRQ for devices that have
GpioInt automatically") automatically assigns the f

iio: remove gpio interrupt probing from drivers that use a single interrupt

Commit 845c877009cf014b ("i2c / ACPI: Assign IRQ for devices that have
GpioInt automatically") automatically assigns the first ACPI GPIO
interrupt in client->irq, so we can remove the probing code from
drivers that use only one interrupt.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

iio: fix drivers that use 0 as a valid IRQ in client->irq (part 2)

Since commit dab472eb931bc291 ("i2c / ACPI: Use 0 to indicate that
device does not have interrupt assigned") 0 is not a valid i2c
c

iio: fix drivers that use 0 as a valid IRQ in client->irq (part 2)

Since commit dab472eb931bc291 ("i2c / ACPI: Use 0 to indicate that
device does not have interrupt assigned") 0 is not a valid i2c
client irq anymore, so change all driver's checks accordingly.

The same issue occurs when the device is instantiated via device tree
with no IRQ, or from the i2c sysfs interface, even before the patch
above.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

Merge branch 'for-4.3-rc/ti-clk-fixes' of https://github.com/t-kristo/linux-pm into clk-fixes

Pull fixes from Tero Kristo:

"A few TI clock driver fixes to pull against 4.3-rc"

* 'for-4.3-rc/ti-clk

Merge branch 'for-4.3-rc/ti-clk-fixes' of https://github.com/t-kristo/linux-pm into clk-fixes

Pull fixes from Tero Kristo:

"A few TI clock driver fixes to pull against 4.3-rc"

* 'for-4.3-rc/ti-clk-fixes' of https://github.com/t-kristo/linux-pm: (3 commits)
clk: ti: dflt: fix enable_reg validity check
clk: ti: fix dual-registration of uart4_ick
clk: ti: clk-7xx: Remove hardwired ABE clock configuration

show more ...

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next

Backmerge to catch up with 4.3. slightly more involved conflict in the
irq code, but nothing beyond adjacent changes.

Signed-off-

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next

Backmerge to catch up with 4.3. slightly more involved conflict in the
irq code, but nothing beyond adjacent changes.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

show more ...

Merge tag 'v4.3-rc3' into next

Merge with Linux 4.3-rc3 to bring in MFD DA9062 changes to merge DA9062
OnKey driver.

Merge tag 'v4.3-rc2' into k.o/for-4.3-v1

Linux 4.3-rc2

Merge tag 'v4.3-rc2' into topic/drm-misc

Backmerge Linux 4.3-rc2 because of conflicts in the dp helper code
between bugfixes and new code. Just adjacent lines really.

On top of that there's a silen

Merge tag 'v4.3-rc2' into topic/drm-misc

Backmerge Linux 4.3-rc2 because of conflicts in the dp helper code
between bugfixes and new code. Just adjacent lines really.

On top of that there's a silent conflict in the new fsl-dcu driver
merged into 4.3 and

commit 844f9111f6f54f88eb2f0fac121b82ce77193866
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Wed Sep 2 10:42:40 2015 +0200

drm/atomic: Make prepare_fb/cleanup_fb only take state, v3.

which Thierry Reding spotted and provided a fixup for.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

show more ...

Merge branch 'for-linus' into for-next

Merge tag 'v4.3-rc1' into spi-fix-doc

Linux 4.3-rc1

Merge tag 'v4.3-rc1' into MTD -next development

Merge tag 'v4.3-rc1' into patchwork

Linux 4.3-rc1

* tag 'v4.3-rc1': (11838 commits)
Linux 4.3-rc1
blk: rq_data_dir() should not return a boolean
writeback: plug writeback in wb_writeback() an

Merge tag 'v4.3-rc1' into patchwork

Linux 4.3-rc1

* tag 'v4.3-rc1': (11838 commits)
Linux 4.3-rc1
blk: rq_data_dir() should not return a boolean
writeback: plug writeback in wb_writeback() and writeback_inodes_wb()
thermal: fix intel PCH thermal driver mismerge
ARCv2: [axs103_smp] Reduce clk for SMP FPGA configs
revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each"
mm/early_ioremap: add explicit #include of asm/early_ioremap.h
fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void
selftests: enhance membarrier syscall test
selftests: add membarrier syscall test
sys_membarrier(): system-wide memory barrier (generic, x86)
MODSIGN: fix a compilation warning in extract-cert
Revert "writeback: plug writeback at a high level"
scsi_dh: fix randconfig build error
target: use stringify.h instead of own definition
target/user: Fix UFLAG_UNKNOWN_OP handling
target: Remove no-op conditional
target/user: Remove unused variable
target: Fix max_cmd_sn increment w/o cmdsn mutex regressions
target: Attach EXTENDED_COPY local I/O descriptors to xcopy_pt_sess
...

show more ...

Merge tag 'v4.3-rc1' into locking/core, to refresh the tree

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge linux-block/for-4.3/core into md/for-linux

There were a few conflicts that are fairly easy to resolve.

Signed-off-by: NeilBrown <neilb@suse.com>

Merge branch 'linus' into x86/urgent, to be able to merge a dependent fix

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'next' into for-linus

Prepare first round of input updates for 4.3 merge window.

Merge branch 'for-4.3/gembird' into for-linus

Merge tag 'staging-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
"Here is the big staging driver updates for 4.3-rc1.

Lots of

Merge tag 'staging-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
"Here is the big staging driver updates for 4.3-rc1.

Lots of things all over the place, almost all of them trivial fixups
and changes. The usual IIO updates and new drivers and we have added
the MOST driver subsystem which is getting cleaned up in the tree.
The ozwpan driver is finally being deleted as it is obviously
abandoned and no one cares about it.

Full details are in the shortlog, and all of these have been in
linux-next with no reported issues"

* tag 'staging-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (912 commits)
staging/lustre/o2iblnd: remove references to ib_reg_phsy_mr()
staging: wilc1000: fix build warning with setup_timer()
staging: wilc1000: remove DECLARE_WILC_BUFFER()
staging: wilc1000: remove void function return statements that are not useful
staging: wilc1000: coreconfigurator.c: fix kmalloc error check
staging: wilc1000: coreconfigurator.c: use kmalloc instead of WILC_MALLOC
staging: wilc1000: remove unused codes of gps8ConfigPacket
staging: wilc1000: remove unnecessary void pointer cast
staging: wilc1000: remove WILC_NEW and WILC_NEW_EX
staging: wilc1000: use kmalloc instead of WILC_NEW
staging: wilc1000: Process WARN, INFO options of debug levels from user
staging: wilc1000: remove unneeded tstrWILC_MsgQueueAttrs typedef
staging: wilc1000: delete wilc_osconfig.h
staging: wilc1000: delete wilc_log.h
staging: wilc1000: delete wilc_timer.h
staging: wilc1000: remove WILC_TimerStart()
staging: wilc1000: remove WILC_TimerCreate()
staging: wilc1000: remove WILC_TimerDestroy()
staging: wilc1000: remove WILC_TimerStop()
staging: wilc1000: remove tstrWILC_TimerAttrs typedef
...

show more ...