Merge tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
"Core:
- Fence destaging work
- DRIVER_LEGACY to split off legacy drm drivers
- d

Merge tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
"Core:
- Fence destaging work
- DRIVER_LEGACY to split off legacy drm drivers
- drm_mm refactoring
- Splitting drm_crtc.c into chunks and documenting better
- Display info fixes
- rbtree support for prime buffer lookup
- Simple VGA DAC driver

Panel:
- Add Nexus 7 panel
- More simple panels

i915:
- Refactoring GEM naming
- Refactored vma/active tracking
- Lockless request lookups
- Better stolen memory support
- FBC fixes
- SKL watermark fixes
- VGPU improvements
- dma-buf fencing support
- Better DP dongle support

amdgpu:
- Powerplay for Iceland asics
- Improved GPU reset support
- UVD/VEC powergating support for CZ/ST
- Preinitialised VRAM buffer support
- Virtual display support
- Initial SI support
- GTT rework
- PCI shutdown callback support
- HPD IRQ storm fixes

amdkfd:
- bugfixes

tilcdc:
- Atomic modesetting support

mediatek:
- AAL + GAMMA engine support
- Hook up gamma LUT
- Temporal dithering support

imx:
- Pixel clock from devicetree
- drm bridge support for LVDS bridges
- active plane reconfiguration
- VDIC deinterlacer support
- Frame synchronisation unit support
- Color space conversion support

analogix:
- PSR support
- Better panel on/off support

rockchip:
- rk3399 vop/crtc support
- PSR support

vc4:
- Interlaced vblank timing
- 3D rendering CPU overhead reduction
- HDMI output fixes

tda998x:
- HDMI audio ASoC support

sunxi:
- Allwinner A33 support
- better TCON support

msm:
- DT binding cleanups
- Explicit fence-fd support

sti:
- remove sti415/416 support

etnaviv:
- MMUv2 refactoring
- GC3000 support

exynos:
- Refactoring HDMI DCC/PHY
- G2D pm regression fix
- Page fault issues with wait for vblank

There is no nouveau work in this tree, as Ben didn't get a pull
request in, and he was fighting moving to atomic and adding mst
support, so maybe best it waits for a cycle"

* tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits)
drm/crtc: constify drm_crtc_index parameter
drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next
drm/i915/guc: Unwind GuC workqueue reservation if request construction fails
drm/i915: Reset the breadcrumbs IRQ more carefully
drm/i915: Force relocations via cpu if we run out of idle aperture
drm/i915: Distinguish last emitted request from last submitted request
drm/i915: Allow DP to work w/o EDID
drm/i915: Move long hpd handling into the hotplug work
drm/i915/execlists: Reinitialise context image after GPU hang
drm/i915: Use correct index for backtracking HUNG semaphores
drm/i915: Unalias obj->phys_handle and obj->userptr
drm/i915: Just clear the mmiodebug before a register access
drm/i915/gen9: only add the planes actually affected by ddb changes
drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED
drm/i915/bxt: Fix HDMI DPLL configuration
drm/i915/gen9: fix the watermark res_blocks value
drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations
drm/i915/gen9: minimum scanlines for Y tile is not always 4
drm/i915/gen9: fix the WaWmMemoryReadLatency implementation
drm/i915/kbl: KBL also needs to run the SAGV code
...

show more ...

Merge tag 'imx-drm-next-2016-09-19' of git://git.pengutronix.de/git/pza/linux into drm-next

imx-drm active plane reconfiguration, cleanup, FSU/IC/IRT/VDIC support

- add active plane reconfiguration

Merge tag 'imx-drm-next-2016-09-19' of git://git.pengutronix.de/git/pza/linux into drm-next

imx-drm active plane reconfiguration, cleanup, FSU/IC/IRT/VDIC support

- add active plane reconfiguration support (v4),
use the atomic_disable callback
- stop calling disable_plane manually in the plane destroy path
- let mode cleanup destroy mode objects on driver unbind
- drop deprecated load/unload drm_driver ops
- add exclusive fence to plane state, so the atomic helper can
wait on them, remove the open-coded fence wait from imx-drm
- add low level deinterlacer (VDIC) support
- add support for channel linking via the frame synchronisation unit (FSU)
- add queued image conversion support for memory-to-memory scaling, rotation,
and color space conversion, using IC and IRT.

* tag 'imx-drm-next-2016-09-19' of git://git.pengutronix.de/git/pza/linux:
gpu: ipu-v3: Add queued image conversion support
gpu: ipu-v3: Add ipu_rot_mode_is_irt()
gpu: ipu-v3: fix a possible NULL dereference
drm/imx: parallel-display: detach bridge or panel on unbind
drm/imx: imx-ldb: detach bridge on unbind
drm/imx: imx-ldb: detach panel on unbind
gpu: ipu-v3: Add FSU channel linking support
gpu: ipu-v3: Add Video Deinterlacer unit
drm/imx: add exclusive fence to plane state
drm/imx: fold ipu_plane_disable into ipu_disable_plane
drm/imx: don't destroy mode objects manually on driver unbind
drm/imx: drop deprecated load/unload drm_driver ops
drm/imx: don't call disable_plane in plane destroy path
drm/imx: Add active plane reconfiguration support
drm/imx: Use DRM_PLANE_COMMIT_NO_DISABLE_AFTER_MODESET flag
drm/imx: ipuv3-crtc: Use the callback ->atomic_disable instead of ->disable
gpu: ipu-v3: Do not wait for DMFC FIFO to clear when disabling DMFC channel

show more ...

gpu: ipu-v3: Add queued image conversion support

This patch implements image conversion support using the IC tasks, with
tiling to support scaling to and from images up to 4096x4096. Image
rotation

gpu: ipu-v3: Add queued image conversion support

This patch implements image conversion support using the IC tasks, with
tiling to support scaling to and from images up to 4096x4096. Image
rotation is also supported. Image conversion requests are added to
a run queue under the IC tasks.

The internal API is subsystem agnostic (no V4L2 dependency except
for the use of V4L2 fourcc pixel formats).

Callers prepare for image conversion by calling
ipu_image_convert_prepare(), which initializes the parameters of
the conversion. The caller passes in the ipu and IC task to use for
the conversion, the input and output image formats, a rotation mode,
and a completion callback and completion context pointer:

struct ipu_image_converter_ctx *
ipu_image_convert_prepare(struct ipu_soc *ipu, enum ipu_ic_task ic_task,
struct ipu_image *in, struct ipu_image *out,
enum ipu_rotate_mode rot_mode,
ipu_image_converter_cb_t complete,
void *complete_context);

A new conversion context is created that is added to an IC task
context queue. The caller is given the new conversion context,
which can then be passed to the further APIs:

int ipu_image_convert_queue(struct ipu_image_converter_run *run);

This queues the given image conversion request run to a run queue,
and starts the conversion immediately if the run queue is empty. Only
the physaddr's of the input and output image buffers are needed,
since the conversion context was created previously with
ipu_image_convert_prepare(). When the conversion completes, the run
pointer is returned to the completion callback.

void ipu_image_convert_abort(struct ipu_image_converter_ctx *ctx);

This will abort any active or pending conversions for this context.
Any currently active or pending runs belonging to this context are
returned via the completion callback with an error status.

void ipu_image_convert_unprepare(struct ipu_image_converter_ctx *ctx);

Unprepares the conversion context. Any active or pending runs will
be aborted by calling ipu_image_convert_abort().

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

gpu: ipu-v3: Add Video Deinterlacer unit

Adds the Video Deinterlacer (VDIC) unit.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Merge remote-tracking branch 'linusw-gpio/for-next' into devm_gpiochip

Base for demv_gpiochip_add_data() and devm_gpiochip_remove().

Merge branch 'next' into for-linus

Prepare first round of input updates for 3.20.

Merge tag 'v3.19-rc4' into next

Merge with mainline to bring in the latest thermal and other changes.

Merge remote-tracking branch 'wireless-next/master' into iwlwifi-next

Merge Linus' tree to be be to apply submitted patches to newer code than
current trivial.git base

Merge remote-tracking branch 'wireless-next/master' into mac80211-next

This brings in some mwifiex changes that further patches will
need to work on top to not cause merge conflicts.

Signed-off-by:

Merge remote-tracking branch 'wireless-next/master' into mac80211-next

This brings in some mwifiex changes that further patches will
need to work on top to not cause merge conflicts.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Merge tag 'v3.18-rc4' into x86/cleanups, to refresh the tree before pulling new changes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'asoc-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.18

A few small driver fixes for v3.18 plus the removal of the s6000 suppo

Merge tag 'asoc-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.18

A few small driver fixes for v3.18 plus the removal of the s6000 support
since the relevant chip is no longer supported in mainline.

show more ...

Merge tag 'v3.18-rc1' into x86/urgent

Reason:
Need to apply audit patch on top of v3.18-rc1.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Merge branch 'topic/enum-info-cleanup' into for-next

this is a series of patches to just convert the plain info callback
for enum ctl elements to snd_ctl_elem_info(). Also, it includes the
extensio

Merge branch 'topic/enum-info-cleanup' into for-next

this is a series of patches to just convert the plain info callback
for enum ctl elements to snd_ctl_elem_info(). Also, it includes the
extension of snd_ctl_elem_info(), for catching the unexpected string
cut-off and handling the zero items.

show more ...

Merge tag 'v3.18-rc1' into v4l_for_linus

Linux 3.18-rc1

* tag 'v3.18-rc1': (9167 commits)
Linux 3.18-rc1
MAINTAINERS: corrected bcm2835 search
Net: DSA: Fix checking for get_phy_flags functio

Merge tag 'v3.18-rc1' into v4l_for_linus

Linux 3.18-rc1

* tag 'v3.18-rc1': (9167 commits)
Linux 3.18-rc1
MAINTAINERS: corrected bcm2835 search
Net: DSA: Fix checking for get_phy_flags function
sparc64: Do not define thread fpregs save area as zero-length array.
sparc64: Fix corrupted thread fault code.
MAINTAINERS: Become the docs maintainer
x86,kvm,vmx: Preserve CR4 across VM entry
ipv6: fix a potential use after free in sit.c
ipv6: fix a potential use after free in ip6_offload.c
ipv4: fix a potential use after free in gre_offload.c
tcp: fix build error if IPv6 is not enabled
futex: Ensure get_futex_key_refs() always implies a barrier
bna: fix skb->truesize underestimation
net: dsa: add includes for ethtool and phy_fixed definitions
openvswitch: Set flow-key members.
netrom: use linux/uaccess.h
dsa: Fix conversion from host device to mii bus
tipc: fix bug in bundled buffer reception
ipv6: introduce tcp_v6_iif()
sfc: add support for skb->xmit_more
...

show more ...

Merge tag 'v3.18-rc1' into patchwork

Linux 3.18-rc1

* tag 'v3.18-rc1': (9526 commits)
Linux 3.18-rc1
MAINTAINERS: corrected bcm2835 search
Net: DSA: Fix checking for get_phy_flags function

Merge tag 'v3.18-rc1' into patchwork

Linux 3.18-rc1

* tag 'v3.18-rc1': (9526 commits)
Linux 3.18-rc1
MAINTAINERS: corrected bcm2835 search
Net: DSA: Fix checking for get_phy_flags function
sparc64: Do not define thread fpregs save area as zero-length array.
sparc64: Fix corrupted thread fault code.
MAINTAINERS: Become the docs maintainer
x86,kvm,vmx: Preserve CR4 across VM entry
ipv6: fix a potential use after free in sit.c
ipv6: fix a potential use after free in ip6_offload.c
ipv4: fix a potential use after free in gre_offload.c
tcp: fix build error if IPv6 is not enabled
futex: Ensure get_futex_key_refs() always implies a barrier
bna: fix skb->truesize underestimation
net: dsa: add includes for ethtool and phy_fixed definitions
openvswitch: Set flow-key members.
netrom: use linux/uaccess.h
dsa: Fix conversion from host device to mii bus
tipc: fix bug in bundled buffer reception
ipv6: introduce tcp_v6_iif()
sfc: add support for skb->xmit_more
...

show more ...

Merge tag 'v3.18-rc1' into for_next

Linux 3.18-rc1

Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
"This is the main git pull for the drm,

I pretty much froze major pulls at -rc5/6 time,

Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
"This is the main git pull for the drm,

I pretty much froze major pulls at -rc5/6 time, and haven't had much
fallout, so will probably continue doing that.

Lots of changes all over, big internal header cleanup to make it clear
drm features are legacy things and what are things that modern KMS
drivers should be using. Also big move to use the new generic fences
in all the TTM drivers.

core:
atomic prep work,
vblank rework changes, allows immediate vblank disables
major header reworking and cleanups to better delinate legacy
interfaces from what KMS drivers should be using.
cursor planes locking fixes

ttm:
move to generic fences (affects all TTM drivers)
ppc64 caching fixes

radeon:
userptr support,
uvd for old asics,
reset rework for fence changes
better buffer placement changes,
dpm feature enablement
hdmi audio support fixes

intel:
Cherryview work,
180 degree rotation,
skylake prep work,
execlist command submission
full ppgtt prep work
cursor improvements
edid caching,
vdd handling improvements

nouveau:
fence reworking
kepler memory clock work
gt21x clock work
fan control improvements
hdmi infoframe fixes
DP audio

ast:
ppc64 fixes
caching fix

rcar:
rcar-du DT support

ipuv3:
prep work for capture support

msm:
LVDS support for mdp4, new panel, gpu refactoring

exynos:
exynos3250 SoC support, drop bad mmap interface,
mipi dsi changes, and component match support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (640 commits)
drm/mst: rework payload table allocation to conform better.
drm/ast: Fix HW cursor image
drm/radeon/kv: add uvd/vce info to dpm debugfs output
drm/radeon/ci: add uvd/vce info to dpm debugfs output
drm/radeon: export reservation_object from dmabuf to ttm
drm/radeon: cope with foreign fences inside the reservation object
drm/radeon: cope with foreign fences inside display
drm/core: use helper to check driver features
drm/radeon/cik: write gfx ucode version to ucode addr reg
drm/radeon/si: print full CS when we hit a packet 0
drm/radeon: remove unecessary includes
drm/radeon/combios: declare legacy_connector_convert as static
drm/radeon/atombios: declare connector convert tables as static
drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table
drm/radeon/dpm: drop clk/voltage dependency filters for BTC
drm/radeon/dpm: drop clk/voltage dependency filters for CI
drm/radeon/dpm: drop clk/voltage dependency filters for SI
drm/radeon/dpm: drop clk/voltage dependency filters for NI
drm/radeon: disable audio when we disable hdmi (v2)
drm/radeon: split audio enable between eg and r600 (v2)
...

show more ...

Merge tag 'staging-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging updates from Greg KH:
"Here is the big staging patch set for 3.18-rc1.

Once again, we ar

Merge tag 'staging-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging updates from Greg KH:
"Here is the big staging patch set for 3.18-rc1.

Once again, we are deleting more code than we added, with something
like 150000 lines deleted overall. Some of this is due to drivers
being added to the networking tree, so the old versions are removed
here, but even then, the overall difference is quite good.

Other than driver deletions, lots and lots and lots of minor cleanups
all over the place. Full details are in the changelog"

* tag 'staging-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1481 commits)
staging: et131x: Remove et131x driver from drivers/staging
staging: emxx_udc: Use min_t instead of min
staging: emxx_udc: Fix replace printk(KERN_DEBUG ..) with dev_dbg
staging: media: Fixed else after return or break warning
staging: media: omap4iss: Fixed else after return or break warning
staging: rtl8712: Fixed else not required after return
staging: rtl8712: Fix missing blank line warning
staging: rtl8192e: rtl8192e: Remove spaces before the semicolons
staging: rtl8192e: rtl8192e: Remove unnecessary return statements
staging: rtl8192e: Remove unneeded void return
staging: rtl8192e: Fix void function return statements style
staging: rtl8712: Fix unnecessary parentheses style warning
staging: rtl8192e: Fix unnecessary space before function pointer arguments
staging: rtl8192e: Array was made static const char * const
staging: ft1000: ft1000-usb: Removed unnecessary else statement.
staging: ft1000: ft1000-usb: Removed unnecessary else statement.
staging: ft1000: ft1000-usb: Removed unnecessary parentheses.
staging: ft1000: ft1000-usb: Added new line after declarations.
staging: vt6655: Fixed C99 // comment errors in wpactl.c
staging: speakup: Fixed warning <linux/serial.h> instead of <asm/serial.h>
...

show more ...

Merge tag 'ipu-for-staging-3.18' of git://git.pengutronix.de/git/pza/linux into work-next

Philipp writes:

IPUv3 CPMEM API change across staging and drm

Merge remote-tracking branch 'airlied/drm-next' into topic/vblank-rework

Dave asked me to do the backmerge before sending him the revised pull
request, so here we go. Nothing fancy in the conflicts,

Merge remote-tracking branch 'airlied/drm-next' into topic/vblank-rework

Dave asked me to do the backmerge before sending him the revised pull
request, so here we go. Nothing fancy in the conflicts, just a few
things changed right next to each another.

Conflicts:
drivers/gpu/drm/drm_irq.c

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

show more ...

Merge tag 'ipu-3.18' of git://git.pengutronix.de/git/pza/linux into drm-next

IPUv3 preparations for capture support

* tag 'ipu-3.18' of git://git.pengutronix.de/git/pza/linux: (26 commits)
gpu: i

Merge tag 'ipu-3.18' of git://git.pengutronix.de/git/pza/linux into drm-next

IPUv3 preparations for capture support

* tag 'ipu-3.18' of git://git.pengutronix.de/git/pza/linux: (26 commits)
gpu: ipu-v3: Add ipu_dump()
gpu: ipu-cpmem: Add ipu_cpmem_dump()
gpu: ipu-v3: Add more planar formats support
gpu: ipu-cpmem: Add second buffer support to ipu_cpmem_set_image()
gpu: ipu-cpmem: Add ipu_cpmem_set_rotation()
gpu: ipu-cpmem: Add ipu_cpmem_set_axi_id()
gpu: ipu-cpmem: Add ipu_cpmem_set_block_mode()
gpu: ipu-v3: Add ipu_idmac_lock_enable()
gpu: ipu-v3: Add ipu_idmac_enable_watermark()
gpu: ipu-v3: Add ipu_stride_to_bytes()
gpu: ipu-v3: Add __ipu_idmac_reset_current_buffer()
gpu: ipu-v3: Add ipu_idmac_clear_buffer()
gpu: ipu-v3: Add ipu_idmac_buffer_is_ready()
gpu: ipu-v3: Move IDMAC channel names to imx-ipu-v3.h
gpu: ipu-v3: Add helper function checking if pixfmt is planar
gpu: ipu-v3: Add rotation mode conversion utilities
gpu: ipu-v3: Add ipu_mbus_code_to_colorspace()
gpu: ipu-v3: smfc: Add ipu_smfc_set_watermark()
gpu: ipu-v3: smfc: Convert to per-channel
gpu: ipu-v3: smfc: Move enable/disable to ipu-smfc.c
...

show more ...

gpu: ipu-v3: Add Image Converter unit

Adds the Image Converter (IC) unit.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>

Condensed the three CSC setup functions into a single one th

gpu: ipu-v3: Add Image Converter unit

Adds the Image Converter (IC) unit.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>

Condensed the three CSC setup functions into a single one that
uses static tables to set up the CSC task parameters.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

gpu: ipu-v3: Add Camera Sensor Interface unit

Adds the Camera Sensor Interface (CSI) unit required for video capture.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>

Removed the unus

gpu: ipu-v3: Add Camera Sensor Interface unit

Adds the Camera Sensor Interface (CSI) unit required for video capture.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>

Removed the unused clk_get_rate in ipu_csi_init_interface and the
ipu_csi_ccir_err_detection_enable/disable functions.
Checkpatch cleanup.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

gpu: ipu-v3: Add ipu-cpmem unit

Move channel parameter memory setup functions and macros into a new
submodule ipu-cpmem. In the process, cleanup arguments to the functions
to take a channel pointer

gpu: ipu-v3: Add ipu-cpmem unit

Move channel parameter memory setup functions and macros into a new
submodule ipu-cpmem. In the process, cleanup arguments to the functions
to take a channel pointer instead of a pointer into cpmem for that
channel. That allows the structure of the parameter memory to be
private to ipu-cpmem.c.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...