#
f86c3ed5 |
| 14-Jul-2021 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/mgag200: Split PLL setup into compute and update functions
The _set_plls() functions compute a pixel clock's PLL values and program the hardware accordingly. This happens during atomic commits.
drm/mgag200: Split PLL setup into compute and update functions
The _set_plls() functions compute a pixel clock's PLL values and program the hardware accordingly. This happens during atomic commits.
For atomic modesetting, it's better to separate computation and programming from each other. This will allow to compute the PLL value during atomic checks and catch unsupported modes early.
Split the PLL setup into a compute and an update functions, and call them one after the other. Computed PLL values are store in struct mgag200_pll_values. There are four parameters for the PLL, m, n, p and s. Every compute function stores a value for each of these parameters, and the rsp update function makes the register bits from them. The values stored by the compute function are either plain values or register bits. An additional change is required to always store plain values.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-5-tzimmermann@suse.de
show more ...
|
#
14769672 |
| 14-Jul-2021 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/mgag200: Select clock in PLL update functions
Put the clock-selection code into each of the PLL-update functions to make them select the correct pixel clock. Instead of copying the code, introdu
drm/mgag200: Select clock in PLL update functions
Put the clock-selection code into each of the PLL-update functions to make them select the correct pixel clock. Instead of copying the code, introduce a new helper WREG_MISC_MASKED, which does masked writes into <MISC>. Use it from each individual PLL update function.
The pixel clock for video output was not actually set before programming the clock's values. It worked because the device had the correct clock pre-set.
v2: * don't duplicate <MISC> update code (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: db05f8d3dc87 ("drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O") Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.9+ Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-2-tzimmermann@suse.de
show more ...
|
#
588b3eee |
| 21-Jul-2021 |
Dave Airlie <airlied@redhat.com> |
Merge tag 'drm-misc-next-2021-07-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15:
UAPI Changes:
Cross-subsystem Changes: - udmabuf: Add support for mapping
Merge tag 'drm-misc-next-2021-07-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15:
UAPI Changes:
Cross-subsystem Changes: - udmabuf: Add support for mapping hugepages - Add dma-buf stats to sysfs. - Assorted fixes to fbdev/omap2. - dma-buf: Document DMA_BUF_IOCTL_SYNC - Improve dma-buf non-dynamic exporter expectations better. - Add module parameters for dma-buf size and list limit. - Add HDMI codec support to vc4, to replace vc4's own codec. - Document dma-buf implicit fencing rules. - dma_resv_test_signaled test_all handling.
Core Changes: - Extract i915's eDP backlight code into DRM helpers. - Assorted docbook updates. - Rework drm_dp_aux documentation. - Add support for the DP aux bus. - Shrink dma-fence-chain slightly. - Add alloc/free helpers for dma-fence-chain. - Assorted fixes to TTM., drm/of, bridge - drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers. - Small fix for scheduler completion. - Remove use of drm_device.irq_enabled. - Print the driver name to dmesg when registering framebuffer. - Export drm/gem's shadow plane handling, and use it in vkms. - Assorted small fixes.
Driver Changes: - Add eDP backlight to nouveau. - Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625, amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm. - Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU, EDT ETM0350G0DH6, Innolux EJ030NA panels. - Fix some simple pannels missing bus_format and connector types. - Add mks-guest-stats instrumentation support to vmwgfx. - Merge i915-ttm topic branch. - Make s6e63m0 panel use Mipi-DBI helpers. - Add detect() supoprt for AST. - Use interrupts for hotplug on vc4. - vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now. - vmwgfx now uses copies of vmware's internal device headers. - Slowly convert ti-sn65dsi83 over to atomic. - Rework amdgpu dma-resv handling. - Fix virtio fencing for planes. - Ensure amdgpu can always evict to SYSTEM. - Many drivers fixed for implicit fencing rules. - Set default prepare/cleanup fb for tiny, vram and simple helpers too. - Rework panfrost gpu reset and related serialization. - Update VKMS todo list. - Make bochs a tiny gpu driver, and use vram helper. - Use linux irq interfaces instead of drm_irq in some drivers. - Add support for Raspberry Pi Pico to GUD.
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST # gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3 # gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired] # gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired] # gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired] # gpg: Note: This key has expired! # Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3 From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com
show more ...
|
Revision tags: v5.14-rc1 |
|
#
d9cc564b |
| 02-Jul-2021 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/mgag200: Constify LUT for programming bpp
Declare constant LUT for bpp programming as static const. Removes mutable data from device structure.
Signed-off-by: Thomas Zimmermann <tzimmermann@sus
drm/mgag200: Constify LUT for programming bpp
Declare constant LUT for bpp programming as static const. Removes mutable data from device structure.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210702075642.27834-5-tzimmermann@suse.de
show more ...
|
#
02d4b387 |
| 02-Jul-2021 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/mgag200: Extract device type and flags in mgag200_pci_probe()
The type and flags values are stored in the PCI ID list. Extract them in the probe function. Makes the device initialization more re
drm/mgag200: Extract device type and flags in mgag200_pci_probe()
The type and flags values are stored in the PCI ID list. Extract them in the probe function. Makes the device initialization more readable.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210702075642.27834-4-tzimmermann@suse.de
show more ...
|
Revision tags: v5.13, v5.13-rc7, v5.13-rc6, v5.13-rc5, v5.13-rc4, v5.13-rc3, v5.13-rc2, v5.13-rc1, v5.12, v5.12-rc8, v5.12-rc7, v5.12-rc6, v5.12-rc5, v5.12-rc4, v5.12-rc3, v5.12-rc2, v5.12-rc1-dontuse |
|
#
cbecf716 |
| 23-Feb-2021 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 5.12 merge window.
|
#
415e915f |
| 23-Feb-2021 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.11' into next
Merge with mainline to get latest APIs and device tree bindings.
|
Revision tags: v5.11, v5.11-rc7, v5.11-rc6, v5.11-rc5, v5.11-rc4, v5.11-rc3, v5.11-rc2, v5.11-rc1 |
|
#
4b419325 |
| 15-Dec-2020 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 5.11 merge window.
|
Revision tags: v5.10 |
|
#
58f7553f |
| 11-Dec-2020 |
Mark Brown <broonie@kernel.org> |
Merge remote-tracking branch 'spi/for-5.10' into spi-linus
|
#
031616c4 |
| 11-Dec-2020 |
Mark Brown <broonie@kernel.org> |
Merge remote-tracking branch 'asoc/for-5.10' into asoc-linus
|
#
3c09ec59 |
| 09-Dec-2020 |
Catalin Marinas <catalin.marinas@arm.com> |
Merge branches 'for-next/kvm-build-fix', 'for-next/va-refactor', 'for-next/lto', 'for-next/mem-hotplug', 'for-next/cppc-ffh', 'for-next/pad-image-header', 'for-next/zone-dma-default-32-bit', 'for-nex
Merge branches 'for-next/kvm-build-fix', 'for-next/va-refactor', 'for-next/lto', 'for-next/mem-hotplug', 'for-next/cppc-ffh', 'for-next/pad-image-header', 'for-next/zone-dma-default-32-bit', 'for-next/signal-tag-bits' and 'for-next/cmdline-extended' into for-next/core
* for-next/kvm-build-fix: : Fix KVM build issues with 64K pages KVM: arm64: Fix build error in user_mem_abort()
* for-next/va-refactor: : VA layout changes arm64: mm: don't assume struct page is always 64 bytes Documentation/arm64: fix RST layout of memory.rst arm64: mm: tidy up top of kernel VA space arm64: mm: make vmemmap region a projection of the linear region arm64: mm: extend linear region for 52-bit VA configurations
* for-next/lto: : Upgrade READ_ONCE() to RCpc acquire on arm64 with LTO arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y arm64: alternatives: Remove READ_ONCE() usage during patch operation arm64: cpufeatures: Add capability for LDAPR instruction arm64: alternatives: Split up alternative.h arm64: uaccess: move uao_* alternatives to asm-uaccess.h
* for-next/mem-hotplug: : Memory hotplug improvements arm64/mm/hotplug: Ensure early memory sections are all online arm64/mm/hotplug: Enable MEM_OFFLINE event handling arm64/mm/hotplug: Register boot memory hot remove notifier earlier arm64: mm: account for hotplug memory when randomizing the linear region
* for-next/cppc-ffh: : Add CPPC FFH support using arm64 AMU counters arm64: abort counter_read_on_cpu() when irqs_disabled() arm64: implement CPPC FFH support using AMUs arm64: split counter validation function arm64: wrap and generalise counter read functions
* for-next/pad-image-header: : Pad Image header to 64KB and unmap it arm64: head: tidy up the Image header definition arm64/head: avoid symbol names pointing into first 64 KB of kernel image arm64: omit [_text, _stext) from permanent kernel mapping
* for-next/zone-dma-default-32-bit: : Default to 32-bit wide ZONE_DMA (previously reduced to 1GB for RPi4) of: unittest: Fix build on architectures without CONFIG_OF_ADDRESS mm: Remove examples from enum zone_type comment arm64: mm: Set ZONE_DMA size based on early IORT scan arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges of: unittest: Add test for of_dma_get_max_cpu_address() of/address: Introduce of_dma_get_max_cpu_address() arm64: mm: Move zone_dma_bits initialization into zone_sizes_init() arm64: mm: Move reserve_crashkernel() into mem_init() arm64: Force NO_BLOCK_MAPPINGS if crashkernel reservation is required arm64: Ignore any DMA offsets in the max_zone_phys() calculation
* for-next/signal-tag-bits: : Expose the FAR_EL1 tag bits in siginfo arm64: expose FAR_EL1 tag bits in siginfo signal: define the SA_EXPOSE_TAGBITS bit in sa_flags signal: define the SA_UNSUPPORTED bit in sa_flags arch: provide better documentation for the arch-specific SA_* flags signal: clear non-uapi flag bits when passing/returning sa_flags arch: move SA_* definitions to generic headers parisc: start using signal-defs.h parisc: Drop parisc special case for __sighandler_t
* for-next/cmdline-extended: : Add support for CONFIG_CMDLINE_EXTENDED arm64: Extend the kernel command line from the bootloader arm64: kaslr: Refactor early init command line parsing
show more ...
|
Revision tags: v5.10-rc7, v5.10-rc6 |
|
#
20c7775a |
| 26-Nov-2020 |
Peter Zijlstra <peterz@infradead.org> |
Merge remote-tracking branch 'origin/master' into perf/core
Further perf/core patches will depend on:
d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")
which is already in Li
Merge remote-tracking branch 'origin/master' into perf/core
Further perf/core patches will depend on:
d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")
which is already in Linus' tree.
show more ...
|
Revision tags: v5.10-rc5 |
|
#
05909cd9 |
| 18-Nov-2020 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.9' into next
Sync up with mainline to bring in the latest DTS files.
|
Revision tags: v5.10-rc4, v5.10-rc3 |
|
#
666fab4a |
| 07-Nov-2020 |
Ingo Molnar <mingo@kernel.org> |
Merge branch 'linus' into perf/kprobes
Conflicts: include/asm-generic/atomic-instrumented.h kernel/kprobes.c
Use the upstream atomic-instrumented.h checksum, and pick the kprobes version of kerne
Merge branch 'linus' into perf/kprobes
Conflicts: include/asm-generic/atomic-instrumented.h kernel/kprobes.c
Use the upstream atomic-instrumented.h checksum, and pick the kprobes version of kernel/kprobes.c, which effectively reverts this upstream workaround:
645f224e7ba2: ("kprobes: Tell lockdep about kprobe nesting")
Since the new code *should* be fine without nesting.
Knock on wood ...
Signed-off-by: Ingo Molnar <mingo@kernel.org>
show more ...
|
#
01be83ee |
| 04-Nov-2020 |
Thomas Gleixner <tglx@linutronix.de> |
Merge branch 'core/urgent' into core/entry
Pick up the entry fix before further modifications.
|
#
4f6b838c |
| 12-Nov-2020 |
Marc Zyngier <maz@kernel.org> |
Merge tag 'v5.10-rc1' into kvmarm-master/next
Linux 5.10-rc1
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
Revision tags: v5.10-rc2 |
|
#
4a95857a |
| 30-Oct-2020 |
Zhenyu Wang <zhenyuw@linux.intel.com> |
Merge tag 'drm-intel-fixes-2020-10-29' into gvt-fixes
Backmerge for 5.10-rc1 to apply one extra APL fix.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
#
f59cddd8 |
| 28-Oct-2020 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v5.10-rc1' into regulator-5.10
Linux 5.10-rc1
|
#
3bfd5f42 |
| 28-Oct-2020 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v5.10-rc1' into spi-5.10
Linux 5.10-rc1
|
#
ce038aea |
| 28-Oct-2020 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v5.10-rc1' into asoc-5.10
Linux 5.10-rc1
|
Revision tags: v5.10-rc1 |
|
#
93b694d0 |
| 15-Oct-2020 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie: "Not a major amount of change, the i915 trees got split into display and gt trees to be
Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie: "Not a major amount of change, the i915 trees got split into display and gt trees to better facilitate higher level review, and there's a major refactoring of i915 GEM locking to use more core kernel concepts (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards get DC support, nouveau got a bump in displayport support with common code extraction from i915.
Outside of drm this contains a couple of patches for hexint moduleparams which you've acked, and a virtio common code tree that you should also get via it's regular path.
New driver: - Cadence MHDP8546 DisplayPort bridge driver
core: - cross-driver scatterlist cleanups - devm_drm conversions - remove drm_dev_init - devm_drm_dev_alloc conversion
ttm: - lots of refactoring and cleanups
bridges: - chained bridge support in more drivers
panel: - misc new panels
scheduler: - cleanup priority levels
displayport: - refactor i915 code into helpers for nouveau
i915: - split into display and GT trees - WW locking refactoring in GEM - execbuf2 extension mechanism - syncobj timeline support - GEN 12 HOBL display powersaving - Rocket Lake display additions - Disable FBC on Tigerlake - Tigerlake Type-C + DP improvements - Hotplug interrupt refactoring
amdgpu: - Sienna Cichlid updates - Navy Flounder updates - DCE6 (SI) support for DC - Plane rotation enabled - TMZ state info ioctl - PCIe DPC recovery support - DC interrupt handling refactor - OLED panel fixes
amdkfd: - add SMI events for thermal throttling - SMI interface events ioctl update - process eviction counters
radeon: - move to dma_ for allocations - expose sclk via sysfs
msm: - DSI support for sm8150/sm8250 - per-process GPU pagetable support - Displayport support
mediatek: - move HDMI phy driver to PHY - convert mtk-dpi to bridge API - disable mt2701 tmds
tegra: - bridge support
exynos: - misc cleanups
vc4: - dual display cleanups
ast: - cleanups
gma500: - conversion to GPIOd API
hisilicon: - misc reworks
ingenic: - clock handling and format improvements
mcde: - DSI support
mgag200: - desktop g200 support
mxsfb: - i.MX7 + i.MX8M - alpha plane support
panfrost: - devfreq support - amlogic SoC support
ps8640: - EDID from eDP retrieval
tidss: - AM65xx YUV workaround
virtio: - virtio-gpu exported resources
rcar-du: - R8A7742, R8A774E1 and R8A77961 support - YUV planar format fixes - non-visible plane handling - VSP device reference count fix - Kconfig fix to avoid displaying disabled options in .config"
* tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits) drm/ingenic: Fix bad revert drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init drm/amdgpu: Remove warning for virtual_display drm/amdgpu: kfd_initialized can be static drm/amd/pm: setup APU dpm clock table in SMU HW initialization drm/amdgpu: prevent spurious warning drm/amdgpu/swsmu: fix ARC build errors drm/amd/display: Fix OPTC_DATA_FORMAT programming drm/amd/display: Don't allow pstate if no support in blank drm/panfrost: increase readl_relaxed_poll_timeout values MAINTAINERS: Update entry for st7703 driver after the rename Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached" drm/amd/display: HDMI remote sink need mode validation for Linux drm/amd/display: Change to correct unit on audio rate drm/amd/display: Avoid set zero in the requested clk drm/amdgpu: align frag_end to covered address space drm/amdgpu: fix NULL pointer dereference for Renoir drm/vmwgfx: fix regression in thp code due to ttm init refactor. drm/amdgpu/swsmu: add interrupt work handler for smu11 parts drm/amdgpu/swsmu: add interrupt work function ...
show more ...
|
Revision tags: v5.9, v5.9-rc8, v5.9-rc7, v5.9-rc6, v5.9-rc5 |
|
#
0ea8a56d |
| 12-Sep-2020 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-next-queued
Sync drm-intel-gt-next here so we can have an unified fixes flow.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
#
9ddb236f |
| 09-Sep-2020 |
Takashi Iwai <tiwai@suse.de> |
Merge branch 'for-linus' into for-next
Back-merge to apply the tasklet conversion patches that are based on the already applied tasklet API changes on 5.9-rc4.
Signed-off-by: Takashi Iwai <tiwai@su
Merge branch 'for-linus' into for-next
Back-merge to apply the tasklet conversion patches that are based on the already applied tasklet API changes on 5.9-rc4.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v5.9-rc4 |
|
#
6bde8ef5 |
| 02-Sep-2020 |
Takashi Iwai <tiwai@suse.de> |
Merge branch 'topic/tasklet-convert' into for-linus
Pull tasklet API conversions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
#
ead5d1f4 |
| 01-Sep-2020 |
Jiri Kosina <jkosina@suse.cz> |
Merge branch 'master' into for-next
Sync with Linus' branch in order to be able to apply fixups of more recent patches.
|