drm/etnaviv: avoid deprecated timespec

struct timespec is being removed from the kernel because it often leads
to code that is not y2038-safe.

In the etnaviv driver, monotonic timestamps are used,

drm/etnaviv: avoid deprecated timespec

struct timespec is being removed from the kernel because it often leads
to code that is not y2038-safe.

In the etnaviv driver, monotonic timestamps are used, which do not suffer
from overflow, but the usage of timespec here gets in the way of removing
the interface completely.

Pass down the user-supplied 64-bit value here rather than converting
it to an intermediate timespec to avoid the conversion.

The conversion is transparent for all regular CLOCK_MONOTONIC values,
but is a small change in behavior for excessively large values: the
existing code would treat e.g. tv_sec=0x100000000 the same as tv_sec=0
and not block, while the new code it would block for up to 2^31
seconds. The new behavior is more logical here, but if it causes problems,
the truncation can be put back.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC

Most kernel interfaces that take a timespec require normalized
representation with tv_nsec between 0 and NSEC_PER_SEC.

Passing values large

drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC

Most kernel interfaces that take a timespec require normalized
representation with tv_nsec between 0 and NSEC_PER_SEC.

Passing values larger than 0x100000000ull further behaves differently
on 32-bit and 64-bit kernels, and can cause the latter to spend a long
time counting seconds in timespec64_sub()/set_normalized_timespec64().

Reject those large values at the user interface to enforce sane and
portable behavior.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.5 merge window.

Merge tag 'v5.4-rc8' into WIP.x86/mm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'linus' into x86/hyperv

Pick up upstream fixes to avoid conflicts.

Merge tag 'v5.4-rc5' into next

Sync up with mainline.

Merge tag 'v5.4-rc3' into spi-5.4

Linux 5.4-rc3

Merge tag 'fix-missing-panels' into fixes

Merge drm/drm-next into drm-misc-next

We haven't done any backmerge for a while due to the merge window, and it
starts to become an issue for komeda. Let's bring 5.4-rc1 in.

Signed-off-by: Maxime R

Merge drm/drm-next into drm-misc-next

We haven't done any backmerge for a while due to the merge window, and it
starts to become an issue for komeda. Let's bring 5.4-rc1 in.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

We haven't backmerged for a while, let's start the -rc period by pulling
rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
"This is the main pull request for 5.4-rc1 merge window. I don't think
there is anythin

Merge tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
"This is the main pull request for 5.4-rc1 merge window. I don't think
there is anything outstanding so next week should just be fixes, but
we'll see if I missed anything. I landed some fixes earlier in the
week but got delayed writing summary and sending it out, due to a mix
of sick kid and jetlag!

There are some fixes pending, but I'd rather get the main merge out of
the way instead of delaying it longer.

It's also pretty large in commit count and new amd header file size.
The largest thing is four new amdgpu products (navi12/14, arcturus and
renoir APU support).

Otherwise it's pretty much lots of work across the board, i915 has
started landing tigerlake support, lots of icelake fixes and lots of
locking reworking for future gpu support, lots of header file rework
(drmP.h is nearly gone), some old legacy hacks (DRM_WAIT_ON) have been
put into the places they are needed.

uapi:
- content protection type property for HDCP

core:
- rework include dependencies
- lots of drmP.h removals
- link rate calculation robustness fix
- make fb helper map only when required
- add connector->DDC adapter link
- DRM_WAIT_ON removed
- drop DRM_AUTH usage from drivers

dma-buf:
- reservation object fence helper

dma-fence:
- shrink dma_fence struct
- merge signal functions
- store timestamps in dma_fence
- selftests

ttm:
- embed drm_get_object struct into ttm_buffer_object
- release_notify callback

bridges:
- sii902x - audio graph card support
- tc358767 - aux data handling rework
- ti-snd64dsi86 - debugfs support, DSI mode flags support

panels:
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe
Himax8279d, Sharp LD-D5116Z01B
- TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01,
Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1

i915:
- Initial tigerlake platform support
- Locking simplification work, general all over refactoring.
- Selftests
- HDCP debug info improvements
- DSI properties
- Icelake display PLL fixes, colorspace fixes, bandwidth fixes, DSI
suspend/resume
- GuC fixes
- Perf fixes
- ElkhartLake enablement
- DP MST fixes
- GVT - command parser enhancements

amdgpu:
- add wipe memory on release flag for buffer creation
- Navi12/14 support (may be marked experimental)
- Arcturus support
- Renoir APU support
- mclk DPM for Navi
- DC display fixes
- Raven scatter/gather support
- RAS support for GFX
- Navi12 + Arcturus power features
- GPU reset for Picasso
- smu11 i2c controller support

amdkfd:
- navi12/14 support
- Arcturus support

radeon:
- kexec fix

nouveau:
- improved display color management
- detect lack of GPU power cables

vmwgfx:
- evicition priority support
- remove unused security feature

msm:
- msm8998 display support
- better async commit support for cursor updates

etnaviv:
- per-process address space support
- performance counter fixes
- softpin support

mcde:
- DCS transfers fix

exynos:
- drmP.h cleanup

lima:
- reduce logging

kirin:
- misc clenaups

komeda:
- dual-link support
- DT memory regions

hisilicon:
- misc fixes

imx:
- IPUv3 image converter fixes
- 32-bit RGB V4L2 pixel format support

ingenic:
- more support for panel related cases

mgag200:
- cursor support fix

panfrost:
- export GPU features register to userspace
- gpu heap allocations
- per-fd address space support

pl111:
- CLD pads wiring support removed from DT

rockchip:
- rework to use DRM PSR helpers
- fix bug in VOP_WIN_GET macro
- DSI DT binding rework

sun4i:
- improve support for color encoding and range
- DDC enabled GPIO

tinydrm:
- rework SPI support
- improve MIPI-DBI support
- moved to drm/tiny

vkms:
- rework CRC tracking

dw-hdmi:
- get_eld and i2s improvements

gm12u320:
- misc fixes

meson:
- global code cleanup
- vpu feature detect

omap:
- alpha/pixel blend mode properties

rcar-du:
- misc fixes"

* tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm: (2112 commits)
drm/nouveau/bar/gm20b: Avoid BAR1 teardown during init
drm/nouveau: Fix ordering between TTM and GEM release
drm/nouveau/prime: Extend DMA reservation object lock
drm/nouveau: Fix fallout from reservation object rework
drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors
drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap
drm/i915: to make vgpu ppgtt notificaiton as atomic operation
drm/i915: Flush the existing fence before GGTT read/write
drm/i915: Hold irq-off for the entire fake lock period
drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915
drm/i915/gvt: update vgpu workload head pointer correctly
drm/mcde: Fix DSI transfers
drm/msm: Use the correct dma_sync calls harder
drm/msm: remove unlikely() from WARN_ON() conditions
drm/msm/dsi: Fix return value check for clk_get_parent
drm/msm: add atomic traces
drm/msm/dpu: async commit support
drm/msm: async commit support
drm/msm: split power control from prepare/complete_commit
drm/msm: add kms->flush_commit()
...

show more ...

Merge drm/drm-next into drm-intel-next-queued

We need the rename of reservation_object to dma_resv.

The solution on this merge came from linux-next:
From: Stephen Rothwell <sfr@canb.auug.org.au>
Da

Merge drm/drm-next into drm-intel-next-queued

We need the rename of reservation_object to dma_resv.

The solution on this merge came from linux-next:
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 14 Aug 2019 12:48:39 +1000
Subject: [PATCH] drm: fix up fallout from "dma-buf: rename reservation_object to dma_resv"

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
drivers/gpu/drm/i915/gt/intel_engine_pool.c | 8 ++++----
3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/gt/intel_engine_pool.c b/drivers/gpu/drm/i915/gt/intel_engine_pool.c
index 03d90b49584a..4cd54c569911 100644
--- a/drivers/gpu/drm/i915/gt/intel_engine_pool.c
+++ b/drivers/gpu/drm/i915/gt/intel_engine_pool.c
@@ -43,12 +43,12 @@ static int pool_active(struct i915_active *ref)
{
struct intel_engine_pool_node *node =
container_of(ref, typeof(*node), active);
- struct reservation_object *resv = node->obj->base.resv;
+ struct dma_resv *resv = node->obj->base.resv;
int err;

- if (reservation_object_trylock(resv)) {
- reservation_object_add_excl_fence(resv, NULL);
- reservation_object_unlock(resv);
+ if (dma_resv_trylock(resv)) {
+ dma_resv_add_excl_fence(resv, NULL);
+ dma_resv_unlock(resv);
}

err = i915_gem_object_pin_pages(node->obj);

which is a simplified version from a previous one which had:
Reviewed-by: Christian König <christian.koenig@amd.com>

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next

Most importantly per-process address spaces on GPUs that are capable of
providing proper isolation has finished

Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next

Most importantly per-process address spaces on GPUs that are capable of
providing proper isolation has finished baking. This is the base for
our softpin implementation, which allows us to support the texture
descriptor buffers used by GC7000 series GPUs without a major UAPI
extension/rework.

Shortlog of notable changes:
- code cleanup from Fabio
- fix performance counters on GC880 and GC2000 GPUs from Christian
- drmP.h header removal from Sam
- per process address space support on MMUv2 GPUs from me
- softpin support from me

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1565946875.2641.73.camel@pengutronix.de

show more ...

drm/etnaviv: implement softpin

With softpin we allow the userspace to take control over the GPU virtual
address space. The new capability is relected by a bump of the minor DRM
version. There are a

drm/etnaviv: implement softpin

With softpin we allow the userspace to take control over the GPU virtual
address space. The new capability is relected by a bump of the minor DRM
version. There are a few restrictions for userspace to take into
account:

1. The kernel reserves a bit of the address space to implement zero page
faulting and mapping of the kernel internal ring buffer. Userspace can
query the kernel for the first usable GPU VM address via
ETNAVIV_PARAM_SOFTPIN_START_ADDR.

2. We only allow softpin on GPUs, which implement proper process
separation via PPAS. If softpin is not available the softpin start
address will be set to ~0.

3. Softpin is all or nothing. A submit using softpin must not use any
address fixups via relocs.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>

show more ...

drm/etnaviv: implement per-process address spaces on MMUv2

This builds on top of the MMU contexts introduced earlier. Instead of having
one context per GPU core, each GPU client receives its own con

drm/etnaviv: implement per-process address spaces on MMUv2

This builds on top of the MMU contexts introduced earlier. Instead of having
one context per GPU core, each GPU client receives its own context.

On MMUv1 this still means a single shared pagetable set is used by all
clients, but on MMUv2 there is now a distinct set of pagetables for each
client. As the command fetch is also translated via the MMU on MMUv2 the
kernel command ringbuffer is mapped into each of the client pagetables.

As the MMU context switch is a bit of a heavy operation, due to the needed
cache and TLB flushing, this patch implements a lazy way of switching the
MMU context. The kernel does not have its own MMU context, but reuses the
last client context for all of its operations. This has some visible impact,
as the GPU can now only be started once a client has submitted some work and
we got the client MMU context assigned. Also the MMU context has a different
lifetime than the general client context, as the GPU might still execute the
kernel command buffer in the context of a client even after the client has
completed all GPU work and has been terminated. Only when the GPU is runtime
suspended or switches to another clients MMU context is the old context
freed up.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>

show more ...

drm/etnaviv: rework MMU handling

This reworks the MMU handling to make it possible to have multiple MMU contexts.
A context is basically one instance of GPU page tables. Currently we have one
set of

drm/etnaviv: rework MMU handling

This reworks the MMU handling to make it possible to have multiple MMU contexts.
A context is basically one instance of GPU page tables. Currently we have one
set of page tables per GPU, which isn't all that clever, as it has the
following two consequences:

1. All GPU clients (aka processes) are sharing the same pagetables, which means
there is no isolation between clients, but only between GPU assigned memory
spaces and the rest of the system. Better than nothing, but also not great.

2. Clients operating on the same set of buffers with different etnaviv GPU
cores, e.g. a workload using both the 2D and 3D GPU, need to map the used
buffers into the pagetable sets of each used GPU.

This patch reworks all the MMU handling to introduce the abstraction of the
MMU context. A context can be shared across different GPU cores, as long as
they have compatible MMU implementations, which is the case for all systems
with Vivante GPUs seen in the wild.

As MMUv1 is not able to change pagetables on the fly, without a
"stop the world" operation, which stops GPU, changes pagetables via CPU
interaction, restarts GPU, the implementation introduces a shared context on
MMUv1, which is returned whenever there is a request for a new context.

This patch assigns a MMU context to each GPU, so on MMUv2 systems there is
still one set of pagetables per GPU, but due to the shared context MMUv1
systems see a change in behavior as now a single pagetable set is used
across all GPU cores.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>

show more ...

drm/etnaviv: share a single cmdbuf suballoc region across all GPUs

There is no need for each GPU to have it's own cmdbuf suballocation
region. Only allocate a single one for the the etnaviv virtual

drm/etnaviv: share a single cmdbuf suballoc region across all GPUs

There is no need for each GPU to have it's own cmdbuf suballocation
region. Only allocate a single one for the the etnaviv virtual device
and share it across all GPUs.

As the suballoc space is now potentially shared by more hardware jobs
running in parallel, double its size to 512KB to avoid contention.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>

show more ...

Merge tag 'drm-misc-next-2019-08-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.4:

UAPI Changes:
- HDCP: Add a Content protection type property

Cross-subsyste

Merge tag 'drm-misc-next-2019-08-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.4:

UAPI Changes:
- HDCP: Add a Content protection type property

Cross-subsystem Changes:

Core Changes:
- Continue to rework the include dependencies
- fb: Remove the unused drm_gem_fbdev_fb_create function
- drm-dp-helper: Make the link rate calculation more tolerant to
non-explicitly defined, yet supported, rates
- fb-helper: Map DRM client buffer only when required, and instanciate a
shadow buffer when the device has a dirty function or says so
- connector: Add a helper to link the DDC adapter used by that connector to
the userspace
- vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout
- dma-buf: Fix a stack corruption
- ttm: Embed a drm_gem_object struct to make ttm_buffer_object a
superclass of GEM, and convert drivers to use it.
- hdcp: Improvements to report the content protection type to the
userspace

Driver Changes:
- Remove drm_gem_prime_import/export from being defined in the drivers
- Drop DRM_AUTH usage from drivers
- Continue to drop drmP.h
- Convert drivers to the connector ddc helper

- ingenic: Add support for more panel-related cases
- komeda: Support for dual-link
- lima: Reduce logging
- mpag200: Fix the cursor support
- panfrost: Export GPU features register to userspace through an ioctl
- pl111: Remove the CLD pads wiring support from the DT
- rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET
macro
- sun4i: Improve support for color encoding and range
- tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny
- vkms: Rework of the CRC tracking

- bridges:
- sii902x: Add support for audio graph card
- tc358767: Rework AUX data handling code
- ti-sn65dsi86: Add Debugfs and proper DSI mode flags support

- panels
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191,
Boe Himax8279d, Sharp LD-D5116Z01B
- Conversion of the device tree bindings to the YAML description
- jh057n00900: Rework the enable / disable path

- fbdev:
- ssd1307fb: Support more devices based on that controller

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808121423.xzpedzkpyecvsiy4@flea

show more ...

drm/etnaviv: clean up includes

Drop unused includes, move more includes from the generic etnaviv_drv.h to
the units where they are actually used, sort includes.

Signed-off-by: Lucas Stach <l.stach@

drm/etnaviv: clean up includes

Drop unused includes, move more includes from the generic etnaviv_drv.h to
the units where they are actually used, sort includes.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

show more ...

drm/etnaviv: drop use of drmP.h

Drop use of the deprecated drmP.h header file.
Fix fallout in all .c files.

The etnaviv_drv.h header file was made self-contained,
and missing includes was then adde

drm/etnaviv: drop use of drmP.h

Drop use of the deprecated drmP.h header file.
Fix fallout in all .c files.

The etnaviv_drv.h header file was made self-contained,
and missing includes was then added to the .c files that needed them.
In a few cases the list of include files was sorted.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: etnaviv@lists.freedesktop.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

show more ...

Merge branch 'next' into for-linus

Prepare second round of input updates for 5.3 merge window.

Merge tag 'v5.2' into next

Sync up with mainline to resolve conflicts in iforce driver.

Merge branch 'next' into for-linus

Prepare input updates for 5.3 merge window.

Merge branches 'for-5.2/fixes', 'for-5.3/doc', 'for-5.3/ish', 'for-5.3/logitech' and 'for-5.3/wacom' into for-linus

drm/etnaviv: drop DRM_AUTH usage from the driver

The authentication can be circumvented, by design, by using the render
node.

From the driver POV there is no distinction between primary and render

drm/etnaviv: drop DRM_AUTH usage from the driver

The authentication can be circumvented, by design, by using the render
node.

From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.

Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: etnaviv@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-3-emil.l.velikov@gmail.com

show more ...