#
cf36ae3e |
| 17-Aug-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-fixes into drm-misc-fixes
Backmerging for v6.0-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
#
36001a2f |
| 05-Aug-2022 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd: "The clk core gains a new set of APIs that allow drivers to both acquire c
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd: "The clk core gains a new set of APIs that allow drivers to both acquire clks and prepare and enable them at the same time. This also comes with devm support so that drivers can make a single call to get and prepare and enable the clk and have that all undone when their driver is removed.
Many folks have requested this feature over the years, but we've had disagreements about how to implement it and if it was worthwhile to encourage drivers to use such an API.
Now it's here, so let's see how it goes.
I hope that by introducing this API we can identify drivers that would benefit from further consolidation of clk API usage, possibly by moving such logic to the bus layer and out of drivers altogether.
Outside of that major API update, we have the usual collection of driver updates. A few new SoCs are supported, mostly Qualcomm and Renesas this time around. Then we have the long tail of non-critical fixes and minor feature additions to various clk drivers.
And finally more clk provider migration to struct clk_parent_data, reducing boot times in the process.
Summary:
Core:
- devm helpers for clk_get() + clk_prepare() and clk_enable()
New Drivers:
- Support for the camera clock controller in Qualcomm SM8450 and the display and gpu clock controllers in Qualcomm SM8350
- Add support for the Renesas RZ/Five SoC
Updates:
- Various fixes, new clocks and USB GDSCs are introduced for Qualcomm IPQ8074
- Fixes to Qualcomm MSM8939 for issues introduced by inheriting the MSM8916 GCC driver
- Support for a new type of voteable GDSCs used by Qualcomm SC8280XP PCIe GDSCs
- Qualcomm SC8280XP pipe clocks transitioned to the new phy-mux implementation
- Qualcomm MSM8996 GCC, RPM clock driver and some clocks in MSM8994 GCC are migrated to use clk_parent_data
- Corrected the topology for Titan (camera) GDSCs on Qualcomm SDM845 and SM8250
- Qualcomm MSM8916 gains more possible frequencies for its GP clocks.
- The GCC and tsens handling on Qualcomm MSM8960 is reworked to mimic the design in IPQ8074 to allow the GCC driver to probe earlier.
- The regulator based mmcx supply for Qualcomm dispcc and videocc is dropped, as the only upstream target that adapted this interface was transitioned several kernel versions ago
- Qualcomm GDSCs found to be enabled at boot will now reflect in the enable count of the supply, as was done with the regulator supplies previously
- Correct adc1, nic_media and edma1's parents for NXP i.MX93
- rdiv, mfd values, the return rate in recalc_rate and add more frequencies in the table for fracn-gppll on i.MX
- Remove Allwinner workaround logic/compatible in fixed factor code
- MediaTek clk driver cleanups
- Add reset support to more MediaTek clk drivers
- deduplicate Allwinner ccu_clks arrays
- Allwinner H6 GPU DFS support
- Adjust Allwinner Kconfig to limit choice
- Fix initconst confusion on Renesas R-Car Gen4
- Add GPT/POEG (PWM) clocks and resets on Renesas RZ/G2L
- Add PFC and WDT clocks and resets on Renesas RZ/V2M
- Add thermal, SDHI, Z (CPU core), PCIe, and HSCIF (serial) clocks on Renesas R-Car S4-8"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (124 commits) clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw() clk: mux: Introduce devm_clk_hw_register_mux_parent_hws() clk: divider: Introduce devm_clk_hw_register_divider_parent_hw() clk: qcom: gcc-msm8994: use parent_hws for gpll0/4 clk: qcom: clk-rpm: convert to parent_data API dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled clk: qcom: Drop mmcx gdsc supply for dispcc and videocc clk: qcom: fix build error initializer element is not constant clk: sprd: Add dt-bindings include file for UMS512 dt-bindings: clk: sprd: Add bindings for ums512 clock controller clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources clk: qcom: add support for SM8350 DISPCC ...
show more ...
|
#
f04ed3d9 |
| 02-Aug-2022 |
Stephen Boyd <sboyd@kernel.org> |
Merge branches 'clk-basic', 'clk-mtk', 'clk-devm-enable' and 'clk-ti-dt' into clk-next
- Remove allwinner workaround logic/compatible in fixed factor code - MediaTek clk driver cleanups - Add res
Merge branches 'clk-basic', 'clk-mtk', 'clk-devm-enable' and 'clk-ti-dt' into clk-next
- Remove allwinner workaround logic/compatible in fixed factor code - MediaTek clk driver cleanups - Add reset support to more MediaTek clk drivers - devm helpers for clk_get() + clk_prepare() and clk_enable()
* clk-basic: clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw() clk: mux: Introduce devm_clk_hw_register_mux_parent_hws() clk: divider: Introduce devm_clk_hw_register_divider_parent_hw() dt-bindings: clock: fixed-factor: Drop Allwinner A10 compatible clk: fixed: Remove Allwinner A10 special-case logic
* clk-mtk: clk: mediatek: reset: Add infra_ao reset support for MT8186 dt-bindings: arm: mediatek: Add #reset-cells property for MT8186 dt-bindings: reset: mediatek: Add infra_ao reset index for MT8186 clk: mediatek: reset: Add infra_ao reset support for MT8192/MT8195 dt-bindings: reset: mediatek: Add infra_ao reset index for MT8192/MT8195 dt-bindings: arm: mediatek: Add #reset-cells property for MT8192/MT8195 clk: mediatek: reset: Add reset support for simple probe clk: mediatek: reset: Add new register reset function with device clk: mediatek: reset: Change return type for clock reset register function clk: mediatek: reset: Support inuput argument index mode clk: mediatek: reset: Support nonsequence base offsets of reset registers clk: mediatek: reset: Revise structure to control reset register clk: mediatek: reset: Merge and revise reset register function clk: mediatek: reset: Extract common drivers to update function clk: mediatek: reset: Refine and reorder functions in reset.c clk: mediatek: reset: Fix written reset bit offset clk: mediatek: reset: Add reset.h clk: mediatek: Delete MT8192 msdc gate dt-bindings: ARM: Mediatek: Remove msdc binding of MT8192 clock
* clk-devm-enable: clk: Remove never used devm_clk_*unregister() clk: Fix pointer casting to prevent oops in devm_clk_release() clk: meson: axg-audio: Don't duplicate devm_clk_get_enabled() clk: Provide new devm_clk helpers for prepared and enabled clocks clk: generalize devm_clk_get() a bit clk: Improve documentation for devm_clk_get() and its optional variant
* clk-ti-dt: clk: ti: Stop using legacy clkctrl names for omap4 and 5
show more ...
|
#
8bb5e7f4 |
| 02-Aug-2022 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 5.20 (or 6.0) merge window.
|
Revision tags: v5.19-rc4, v5.19-rc3, v5.19-rc2, v5.19-rc1 |
|
#
a0bc8ae5 |
| 23-May-2022 |
Rex-BC Chen <rex-bc.chen@mediatek.com> |
clk: mediatek: reset: Add infra_ao reset support for MT8192/MT8195
The infra_ao reset is needed for MT8192 and MT8195. - Add mtk_clk_rst_desc for MT8192 and MT8195 - Add register reset controller fu
clk: mediatek: reset: Add infra_ao reset support for MT8192/MT8195
The infra_ao reset is needed for MT8192 and MT8195. - Add mtk_clk_rst_desc for MT8192 and MT8195 - Add register reset controller function for MT8192 infra_ao. - Move definition of infra reset from cl-mt8183.c to reset.h because it's the same definition with MT8192 and MT8195. - Add new definition of infra reset_4 for MT8192 and MT8195. - Add infra_ao_idx_map for MT8192 and MT8195.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> [Nícolas: Test for MT8192] Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220523093346.28493-15-rex-bc.chen@mediatek.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
show more ...
|
#
03ab8e62 |
| 31-May-2022 |
Konstantin Komarov <almaz.alexandrovich@paragon-software.com> |
Merge tag 'v5.18'
Linux 5.18
|
#
690e1790 |
| 28-May-2022 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.18' into next
Sync up with mainline to get updates to OMAP4 keypad driver and other upstream goodies.
|
Revision tags: v5.18, v5.18-rc7, v5.18-rc6, v5.18-rc5, v5.18-rc4 |
|
#
0aea30a0 |
| 19-Apr-2022 |
Takashi Iwai <tiwai@suse.de> |
Merge tag 'asoc-fix-v5.18-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.18
A collection of fixes that came in since the merge window, plus
Merge tag 'asoc-fix-v5.18-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.18
A collection of fixes that came in since the merge window, plus one new device ID for an x86 laptop. Nothing that really stands out with particularly big impact outside of the affected device.
show more ...
|
Revision tags: v5.18-rc3 |
|
#
651a8879 |
| 13-Apr-2022 |
Takashi Iwai <tiwai@suse.de> |
Merge branch 'topic/cs35l41' into for-next
Pull CS35L41 codec updates
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
#
c16c8bfa |
| 12-Apr-2022 |
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> |
Merge drm/drm-next into drm-intel-gt-next
Pull in TTM changes needed for DG2 CCS enabling from Ram.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
#
83970cd6 |
| 11-Apr-2022 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next
Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb ("drm/i915/xehpsdv: Add has_flat_ccs to device info").
Signed-off-by: Jani Nikula <jani.nikula@intel
Merge drm/drm-next into drm-intel-next
Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb ("drm/i915/xehpsdv: Add has_flat_ccs to device info").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
show more ...
|
Revision tags: v5.18-rc2 |
|
#
cf5c5763 |
| 05-Apr-2022 |
Maxime Ripard <maxime@cerno.tech> |
Merge drm/drm-fixes into drm-misc-fixes
Let's start the 5.18 fixes cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
#
9cbbd694 |
| 05-Apr-2022 |
Maxime Ripard <maxime@cerno.tech> |
Merge drm/drm-next into drm-misc-next
Let's start the 5.19 development cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
Revision tags: v5.18-rc1 |
|
#
95124339 |
| 30-Mar-2022 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd: "There's one large change in the core clk framework here. We change how cl
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd: "There's one large change in the core clk framework here. We change how clk_set_rate_range() works so that the frequency is re-evaulated each time the rate is changed. Previously we wouldn't let clk providers see a rate that was different if it was still within the range, which could be bad for power if the clk could run slower when a range expands. Now the clk provider can decide to do something differently when the constraints change. This broke Nvidia's clk driver so we had to wait for the fix for that to bake a little more in -next.
The rate range patch series also introduced a kunit suite for the clk framework that we're going to extend in the next release. It already made it easy to find corner cases in the rate range patches so I'm excited to see it cover more clk code and increase our confidence in core framework patches in the future. I also added a kunit test for the basic clk gate code and that work will continue to cover more basic clk types: muxes, dividers, etc.
Beyond the core code we have the usual set of clk driver updates and additions. Qualcomm again dominates the diffstat here with lots more SoCs being supported and i.MX follows afer that with a similar number of SoCs gaining clk drivers. Beyond those large additions there's drivers being modernized to use clk_parent_data so we can move away from global string names for all the clks in an SoC. Finally there's lots of little fixes all over the clk drivers for typos, warnings, and missing clks that aren't critical and get batched up waiting for the next merge window to open. Nothing super big stands out in the driver pile. Full details are below.
Core: - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range
New Drivers: - i.MXRT1050 clock driver and bindings - i.MX8DXL clock driver and bindings - i.MX93 clock driver and bindings - NCO blocks on Apple SoCs - Audio clks on StarFive JH7100 RISC-V SoC - Add support for the new Renesas RZ/V2L SoC - Qualcomm SDX65 A7 PLL - Qualcomm SM6350 GPU clks - Qualcomm SM6125, SM6350, QCS2290 display clks - Qualcomm MSM8226 multimedia clks
Updates: - Kunit tests for clk-gate implementation - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments - Mark mux table as const in clk-mux - Make the all_lists array const - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on Renesas R-Car S4-8 - Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates) - Use of_device_get_match_data() instead of open-coding on Rockchip rk3568 - Reintroduce the expected fractional-divider behaviour that disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS - Remove SYS PLL 1/2 clock gates for i.MX8M* - Remove AUDIO MCLK ROOT from i.MX7D - Add fracn gppll clock type used by i.MX93 - Add new composite clock for i.MX93 - Add missing media mipi phy ref clock for i.MX8MP - Fix off by one in imx_lpcg_parse_clks_from_dt() - Rework for the imx pll14xx - sama7g5: One low priority fix for GCLK of PDMC - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8 - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3 - Add CAN-FD clocks on Renesas R-Car V3U - Qualcomm SC8280XP RPMCC - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML - Convert various Qualcomm drivers to use clk_parent_data - Remove test clocks from various Qualcomm drivers - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs - Better pixel clk frequency support on Qualcomm RCG2 clks"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits) clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate dt-bindings: clock: drop useless consumer example dt-bindings: clock: renesas: Make example 'clocks' parsable clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() clk: visconti: prevent array overflow in visconti_clk_register_gates() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments ...
show more ...
|
#
407c04d6 |
| 29-Mar-2022 |
Stephen Boyd <sboyd@kernel.org> |
Merge branches 'clk-microchip', 'clk-si', 'clk-mtk', 'clk-at91' and 'clk-st' into clk-next
- Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk drive
Merge branches 'clk-microchip', 'clk-si', 'clk-mtk', 'clk-at91' and 'clk-st' into clk-next
- Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code
* clk-microchip: clk: microchip: Add driver for Microchip PolarFire SoC dt-bindings: clk: microchip: Add Microchip PolarFire host binding
* clk-si: clk-si5341: replace snprintf in show functions with sysfs_emit clk: si5341: fix reported clk_rate when output divider is 2
* clk-mtk: (32 commits) clk: mediatek: Warn if clk IDs are duplicated clk: mediatek: mt8195: Implement remove functions clk: mediatek: mt8195: Implement error handling in probe functions clk: mediatek: mt8195: Hook up mtk_clk_simple_remove() clk: mediatek: Unregister clks in mtk_clk_simple_probe() error path clk: mediatek: mtk: Implement error handling in register APIs clk: mediatek: pll: Implement error handling in register API clk: mediatek: mux: Implement error handling in register API clk: mediatek: mux: Reverse check for existing clk to reduce nesting level clk: mediatek: gate: Implement error handling in register API clk: mediatek: cpumux: Implement error handling in register API clk: mediatek: mtk: Clean up included headers clk: mediatek: Add mtk_clk_simple_remove() clk: mediatek: Implement mtk_clk_unregister_composites() API clk: mediatek: Implement mtk_clk_unregister_divider_clks() API clk: mediatek: Implement mtk_clk_unregister_factors() API clk: mediatek: Implement mtk_clk_unregister_fixed_clks() API clk: mediatek: pll: Clean up included headers clk: mediatek: pll: Implement unregister API clk: mediatek: pll: Split definitions into separate header file ...
* clk-at91: clk: at91: clk-master: remove dead code clk: at91: sama7g5: fix parents of PDMCs' GCLK clk: at91: sama7g5: Allow MCK1 to be exported and referenced in DT clk: at91: allow setting PMC_AUDIOPINCK clock parents via DT
* clk-st: clk: stm32mp1: Add parent_data to ETHRX clock clk: stm32mp1: Split ETHCK_K into separate MUX and GATE clock
show more ...
|
Revision tags: v5.17, v5.17-rc8, v5.17-rc7 |
|
#
1136fa0c |
| 01-Mar-2022 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.17-rc4' into for-linus
Merge with mainline to get the Intel ASoC generic helpers header and other changes.
|
Revision tags: v5.17-rc6, v5.17-rc5, v5.17-rc4 |
|
#
cd3a77a0 |
| 08-Feb-2022 |
Chen-Yu Tsai <wenst@chromium.org> |
clk: mediatek: mt8195: Hook up mtk_clk_simple_remove()
Various small clock controllers only have clock gates, and utilize mtk_clk_simple_probe() as their driver probe function.
Now that we have a m
clk: mediatek: mt8195: Hook up mtk_clk_simple_remove()
Various small clock controllers only have clock gates, and utilize mtk_clk_simple_probe() as their driver probe function.
Now that we have a matching remove function, hook it up for the relevant drivers. This was done with the following command:
sed -i -e '/mtk_clk_simple_probe/a \ .remove = mtk_clk_simple_remove,' drivers/clk/mediatek/clk-mt8195-*.c
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Link: https://lore.kernel.org/r/20220208124034.414635-29-wenst@chromium.org Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
show more ...
|
Revision tags: v5.17-rc3, v5.17-rc2, v5.17-rc1 |
|
#
87a0b2fa |
| 18-Jan-2022 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.16' into next
Sync up with mainline to bring in the latest API changes.
|
Revision tags: v5.16 |
|
#
f81483aa |
| 05-Jan-2022 |
Takashi Iwai <tiwai@suse.de> |
Merge branch 'for-next' into for-linus
Pull 5.17 materials.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
Revision tags: v5.16-rc8, v5.16-rc7, v5.16-rc6 |
|
#
17580470 |
| 17-Dec-2021 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-next into drm-misc-next-fixes
Backmerging to bring drm-misc-next-fixes up to the latest state for the current release cycle.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
Revision tags: v5.16-rc5 |
|
#
86329873 |
| 09-Dec-2021 |
Daniel Lezcano <daniel.lezcano@linaro.org> |
Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next
"Add optional variant of of_reset_control_get_exclusive(). If the requested reset is not
Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next
"Add optional variant of of_reset_control_get_exclusive(). If the requested reset is not specified in the device tree, this function returns NULL instead of an error."
This dependency is needed for the Generic Timer Module (a.k.a OSTM) support for RZ/G2L.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
show more ...
|
Revision tags: v5.16-rc4, v5.16-rc3 |
|
#
448cc2fb |
| 22-Nov-2021 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next
Sync up with drm-next to get v5.16-rc2.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
#
8626afb1 |
| 22-Nov-2021 |
Tvrtko Ursulin <tvrtko.ursulin@intel.com> |
Merge drm/drm-next into drm-intel-gt-next
Thomas needs the dma_resv_for_each_fence API for i915/ttm async migration work.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
Revision tags: v5.16-rc2 |
|
#
a713ca23 |
| 18-Nov-2021 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-next into drm-misc-next
Backmerging from drm/drm-next for v5.16-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
#
467dd91e |
| 16-Nov-2021 |
Maxime Ripard <maxime@cerno.tech> |
Merge drm/drm-fixes into drm-misc-fixes
We need -rc1 to address a breakage in drm/scheduler affecting panfrost.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|