Merge drm/drm-next into drm-intel-gt-next

Pull in TTM changes needed for DG2 CCS enabling from Ram.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Let's start the 5.18 fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Let's start the 5.19 development cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"There's one large change in the core clk framework here. We change how
cl

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"There's one large change in the core clk framework here. We change how
clk_set_rate_range() works so that the frequency is re-evaulated each
time the rate is changed. Previously we wouldn't let clk providers see
a rate that was different if it was still within the range, which
could be bad for power if the clk could run slower when a range
expands. Now the clk provider can decide to do something differently
when the constraints change. This broke Nvidia's clk driver so we had
to wait for the fix for that to bake a little more in -next.

The rate range patch series also introduced a kunit suite for the clk
framework that we're going to extend in the next release. It already
made it easy to find corner cases in the rate range patches so I'm
excited to see it cover more clk code and increase our confidence in
core framework patches in the future. I also added a kunit test for
the basic clk gate code and that work will continue to cover more
basic clk types: muxes, dividers, etc.

Beyond the core code we have the usual set of clk driver updates and
additions. Qualcomm again dominates the diffstat here with lots more
SoCs being supported and i.MX follows afer that with a similar number
of SoCs gaining clk drivers. Beyond those large additions there's
drivers being modernized to use clk_parent_data so we can move away
from global string names for all the clks in an SoC. Finally there's
lots of little fixes all over the clk drivers for typos, warnings, and
missing clks that aren't critical and get batched up waiting for the
next merge window to open. Nothing super big stands out in the driver
pile. Full details are below.

Core:
- Make clk_set_rate_range() re-evaluate the limits each time
- Introduce various clk_set_rate_range() tests
- Add clk_drop_range() to drop a previously set range

New Drivers:
- i.MXRT1050 clock driver and bindings
- i.MX8DXL clock driver and bindings
- i.MX93 clock driver and bindings
- NCO blocks on Apple SoCs
- Audio clks on StarFive JH7100 RISC-V SoC
- Add support for the new Renesas RZ/V2L SoC
- Qualcomm SDX65 A7 PLL
- Qualcomm SM6350 GPU clks
- Qualcomm SM6125, SM6350, QCS2290 display clks
- Qualcomm MSM8226 multimedia clks

Updates:
- Kunit tests for clk-gate implementation
- Terminate arrays with sentinels and make that clearer
- Cleanup SPDX tags
- Fix typos in comments
- Mark mux table as const in clk-mux
- Make the all_lists array const
- Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding
and add support for dynamic mode
- Clock configuration on Microchip PolarFire SoCs
- Free allocations on probe error in Mediatek clk driver
- Modernize Mediatek clk driver by consolidating code
- Add watchdog (WDT), I2C, and pin function controller (PFC) clocks
on Renesas R-Car S4-8
- Improve the clocks for the Rockchip rk3568 display outputs
(parenting, pll-rates)
- Use of_device_get_match_data() instead of open-coding on Rockchip
rk3568
- Reintroduce the expected fractional-divider behaviour that
disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
- Remove SYS PLL 1/2 clock gates for i.MX8M*
- Remove AUDIO MCLK ROOT from i.MX7D
- Add fracn gppll clock type used by i.MX93
- Add new composite clock for i.MX93
- Add missing media mipi phy ref clock for i.MX8MP
- Fix off by one in imx_lpcg_parse_clks_from_dt()
- Rework for the imx pll14xx
- sama7g5: One low priority fix for GCLK of PDMC
- Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
- Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
- Add CAN-FD clocks on Renesas R-Car V3U
- Qualcomm SC8280XP RPMCC
- Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs
- Rework Qualcomm GCC bindings and convert SDM845 camera bindig to
YAML
- Convert various Qualcomm drivers to use clk_parent_data
- Remove test clocks from various Qualcomm drivers
- Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS
- Qualcomm SM8150 EMAC, PCIe, UFS GDSCs
- Better pixel clk frequency support on Qualcomm RCG2 clks"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits)
clk: zynq: Update the parameters to zynq_clk_register_periph_clk
clk: zynq: trivial warning fix
clk: Drop the rate range on clk_put()
clk: test: Test clk_set_rate_range on orphan mux
clk: Initialize orphan req_rate
dt-bindings: clock: drop useless consumer example
dt-bindings: clock: renesas: Make example 'clocks' parsable
clk: qcom: gcc-msm8994: Fix gpll4 width
dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml
clk: rs9: Add Renesas 9-series PCIe clock generator driver
clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()
clk: visconti: prevent array overflow in visconti_clk_register_gates()
dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator
clk: sifive: Move all stuff into SoCs header files from C files
clk: sifive: Add SoCs prefix in each SoCs-dependent data
riscv: dts: Change the macro name of prci in each device node
dt-bindings: change the macro name of prci in header files and example
clk: sifive: duplicate the macro definitions for the time being
clk: qcom: sm6125-gcc: fix typos in comments
clk: ti: clkctrl: fix typos in comments
...

show more ...

Merge branches 'clk-mvebu', 'clk-const', 'clk-imx' and 'clk-rockchip' into clk-next

- Mark mux table as const in clk-mux
- Make the all_lists array const

* clk-mvebu:
clk: mvebu: use time_is_be

Merge branches 'clk-mvebu', 'clk-const', 'clk-imx' and 'clk-rockchip' into clk-next

- Mark mux table as const in clk-mux
- Make the all_lists array const

* clk-mvebu:
clk: mvebu: use time_is_before_eq_jiffies() instead of open coding it

* clk-const:
clk: Mark clk_core_evict_parent_cache_subtree() 'target' const
clk: Mark 'all_lists' as const
clk: pistachio: Declare mux table as const u32[]
clk: qcom: Declare mux table as const u32[]
clk: mmp: Declare mux tables as const u32[]
clk: hisilicon: Remove unnecessary cast of mux table to u32 *
clk: mux: Declare u32 *table parameter as const
clk: nxp: Declare mux table parameter as const u32 *
clk: nxp: Remove unused variable

* clk-imx: (28 commits)
dt-bindings: clock: drop useless consumer example
clk: imx: Select MXC_CLK for i.MX93 clock driver
clk: imx: remove redundant re-assignment of pll->base
MAINTAINERS: clk: imx: add git tree and dt-bindings files
clk: imx: pll14xx: Support dynamic rates
clk: imx: pll14xx: Add pr_fmt
clk: imx: pll14xx: explicitly return lowest rate
clk: imx: pll14xx: name variables after usage
clk: imx: pll14xx: consolidate rate calculation
clk: imx: pll14xx: Use FIELD_GET/FIELD_PREP
clk: imx: pll14xx: Drop wrong shifting
clk: imx: pll14xx: Use register defines consistently
clk: imx8mp: remove SYS PLL 1/2 clock gates
clk: imx8mn: remove SYS PLL 1/2 clock gates
clk: imx8mm: remove SYS PLL 1/2 clock gates
clk: imx: add i.MX93 clk
clk: imx: support fracn gppll
clk: imx: add i.MX93 composite clk
dt-bindings: clock: add i.MX93 clock definition
dt-bindings: clock: Add imx93 clock support
...

* clk-rockchip:
clk: rockchip: re-add rational best approximation algorithm to the fractional divider
clk/rockchip: Use of_device_get_match_data()
clk: rockchip: Add CLK_SET_RATE_PARENT to the HDMI reference clock on rk3568
clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568
clk: rockchip: Add more PLL rates for rk3568

show more ...

Merge tag 'clk-imx-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux into clk-imx

Pull i.MX clk driver updates from Abel Vesa:

- Add i.MXRT1050 clock driver and bindings
- Add

Merge tag 'clk-imx-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux into clk-imx

Pull i.MX clk driver updates from Abel Vesa:

- Add i.MXRT1050 clock driver and bindings
- Add i.MX8DXL clock driver and bindings
- Add i.MX93 clock driver and bindings
- Remove SYS PLL 1/2 clock gates for i.MX8M*
- Remove AUDIO MCLK ROOT from i.MX7D
- Add fracn gppll clock type used by i.MX93
- Add new composite clock for i.MX93
- Add missing media mipi phy ref clock for i.MX8MP
- Fix off by one in imx_lpcg_parse_clks_from_dt
- Rework for the pll14xx

* tag 'clk-imx-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux: (24 commits)
clk: imx: pll14xx: Support dynamic rates
clk: imx: pll14xx: Add pr_fmt
clk: imx: pll14xx: explicitly return lowest rate
clk: imx: pll14xx: name variables after usage
clk: imx: pll14xx: consolidate rate calculation
clk: imx: pll14xx: Use FIELD_GET/FIELD_PREP
clk: imx: pll14xx: Drop wrong shifting
clk: imx: pll14xx: Use register defines consistently
clk: imx8mp: remove SYS PLL 1/2 clock gates
clk: imx8mn: remove SYS PLL 1/2 clock gates
clk: imx8mm: remove SYS PLL 1/2 clock gates
clk: imx: add i.MX93 clk
clk: imx: support fracn gppll
clk: imx: add i.MX93 composite clk
dt-bindings: clock: add i.MX93 clock definition
dt-bindings: clock: Add imx93 clock support
clk: imx: off by one in imx_lpcg_parse_clks_from_dt()
dt-bindings: fsl: scu: add imx8dxl scu clock support
clk: imx7d: Remove audio_mclk_root_clk
clk: imx8mp: Add missing IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT clock
...

show more ...

clk: imx: add i.MX93 clk

Add i.MX93 clk driver. i.MX93 clk hardware design is different compared
with i.MX8M. It supports 4 sources for each clk root and the sources
are separated into a few groups,

clk: imx: add i.MX93 clk

Add i.MX93 clk driver. i.MX93 clk hardware design is different compared
with i.MX8M. It supports 4 sources for each clk root and the sources
are separated into a few groups, low speed/fast io/audio and etc.

Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220228020908.2810346-6-peng.fan@oss.nxp.com
[abel.vesa@nxp.com: Added missing module license and description]
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>

show more ...

clk: imx: support fracn gppll

This PLL module is a Fractional-N synthesizer,
supporting 30-bit numerator and denominator. Numerator is a signed
number. It has feature to adjust fractional portion of

clk: imx: support fracn gppll

This PLL module is a Fractional-N synthesizer,
supporting 30-bit numerator and denominator. Numerator is a signed
number. It has feature to adjust fractional portion of feedback
divider dynamically. This fracn gppll is used in i.MX93.

Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220228020908.2810346-5-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>

show more ...

clk: imx: add i.MX93 composite clk

i.MX93 CCM ROOT clock has a mux, gate and divider in one register, here
is to combine all these into one composite clk and simplify clk tree.
i.MX93 CCM is a new I

clk: imx: add i.MX93 composite clk

i.MX93 CCM ROOT clock has a mux, gate and divider in one register, here
is to combine all these into one composite clk and simplify clk tree.
i.MX93 CCM is a new IP compared with i.MX8M, so introduce a new file.

Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220228020908.2810346-4-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>

show more ...

Merge tag 'v5.17-rc4' into for-linus

Merge with mainline to get the Intel ASoC generic helpers header and
other changes.

clk: imx: Add imx8dxl clk driver

Add files for imx8dxl clk driver which is based on imx8qxp clock driver.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Ac

clk: imx: Add imx8dxl clk driver

Add files for imx8dxl clk driver which is based on imx8qxp clock driver.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/1639747533-9778-1-git-send-email-abel.vesa@nxp.com

show more ...

clk: imx: Add initial support for i.MXRT1050 clock driver

Add clock driver support for i.MXRT1050.

Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Suggested-by: Giulio Benetti <giulio.benetti@

clk: imx: Add initial support for i.MXRT1050 clock driver

Add clock driver support for i.MXRT1050.

Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Suggested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220111215415.2075257-6-Mr.Bossman075@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>

show more ...

Merge tag 'v5.16' into next

Sync up with mainline to bring in the latest API changes.

Merge branch 'next' into for-linus

Prepare input updates for 5.17 merge window.

Merge branch 'for-next' into for-linus

Pull 5.17 materials.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to bring drm-misc-next-fixes up to the latest state for
the current release cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not specified in the device tree, this function
returns NULL instead of an error."

This dependency is needed for the Generic Timer Module (a.k.a OSTM)
support for RZ/G2L.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

show more ...

Merge tag 'v5.15' into next

Sync up with the mainline to get the latest APIs and DT bindings.

Merge drm/drm-next into drm-intel-next

Sync up with drm-next to get v5.16-rc2.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Thomas needs the dma_resv_for_each_fence API for i915/ttm async migration
work.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging from drm/drm-next for v5.16-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-fixes into drm-misc-fixes

We need -rc1 to address a breakage in drm/scheduler affecting panfrost.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up some tools/perf/ patches that went via tip/perf/core, such
as:

tools/perf: Add mem_hops field in perf_mem_data_src structu

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up some tools/perf/ patches that went via tip/perf/core, such
as:

tools/perf: Add mem_hops field in perf_mem_data_src structure

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"The usual collection of clk driver updates and new driver additions.
In t

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"The usual collection of clk driver updates and new driver additions.
In terms of lines it's mainly Qualcomm and Mediatek code, supporting
various SoCs and their multitude of clk controllers.

New Drivers:
- GCC and RPMcc support for Qualcomm QCM2290 SoCs
- GCC support for Qualcomm MSM8994/MSM8992 SoCs
- LPASSCC and CAMCC support for Qualcomm SC7280 SoCs
- Support for Mediatek MT8195 SoCs
- Initial clock driver for the Exynos850 SoC
- Add i.MX8ULP clock driver and related bindings

Updates:
- Clock power management for new SAMA7G5 SoC
- Updates to the master clock driver and sam9x60-pll to be able to
use cpufreq-dt driver and avoid overclocking of CPU and MCK0
domains while changing the frequency via DVFS
- Use ARRAY_SIZE in qcom clk drivers
- Remove some impractical fallback parent names in qcom clk drivers
- Make Mediatek clk drivers tristate
- Refactoring of the CPU clock code and conversion of Samsung
Exynos5433 CPU clock driver to the platform driver
- A few conversions to devm_platform_ioremap_resource()
- Updates of the Samsung Kconfig help text
- Update video path realted clocks for Amlogic meson8
- Add SPI Multi I/O Bus and SDHI clocks and resets on Renesas RZ/G2L
- Add SPI Multi I/O Bus (RPC) clocks on Renesas R-Car V3U
- Add MediaLB clocks on Renesas R-Car H3, M3-W/W+, and M3-N
- Remove unused helpers from i.MX specific clock header
- Rework all i.MX clk based helpers to use clk_hw based ones
- Rework i.MX gate/mux/divider wrappers
- Rework imx_clk_hw_composite and imx_clk_hw_pll14xx wrappers
- Update i.MX pllv4 and composite clocks to support i.MX8ULP
- Disable i.MX7ULP composite clock during initialization
- Add CLK_SET_RATE_NO_REPARENT flag to the i.MX7ULP composite
- Disable the i.MX pfd when set pfdv2 clock rate
- Add support for i.MX8ULP in pfdv2
- Add the pcc reset controller support on i.MX8ULP
- Fix the build break when clk-imx8ulp is built as module
- Move csi_sel mux to correct base register in i.MX6UL clock drivr
- Fix csi clk gate register in i.MX6UL clock driver
- Fix build bug making CLK_IMX8ULP select MXC_CLK
- Add TPU (PWM), and Z (Cortex-A76) clocks on Renesas R-Car V3U
- Add Ethernet clocks on Renesas RZ/G2L
- Move Rockchip to use module_platform_probe
- Enable usage of Coresight related clocks on Rockchip rk3399"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (170 commits)
clk: use clk_core_get_rate_recalc() in clk_rate_get()
clk: at91: sama7g5: set low limit for mck0 at 32KHz
clk: at91: sama7g5: remove prescaler part of master clock
clk: at91: clk-master: add notifier for divider
clk: at91: clk-sam9x60-pll: add notifier for div part of PLL
clk: at91: clk-master: fix prescaler logic
clk: at91: clk-master: mask mckr against layout->mask
clk: at91: clk-master: check if div or pres is zero
clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL
clk: at91: pmc: add sama7g5 to the list of available pmcs
clk: at91: clk-master: improve readability by using local variables
clk: at91: clk-master: add register definition for sama7g5's master clock
clk: at91: sama7g5: add securam's peripheral clock
clk: at91: pmc: execute suspend/resume only for backup mode
clk: at91: re-factor clocks suspend/resume
clk: ux500: Add driver for the reset portions of PRCC
dt-bindings: clock: u8500: Rewrite in YAML and extend
clk: composite: Use rate_ops.determine_rate when also a mux is available
clk: samsung: describe drivers in Kconfig
clk: samsung: exynos5433: update apollo and atlas clock probing
...

show more ...