#
3a378723 |
| 23-Sep-2024 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas: "Enumeration:
- Wait for device readiness after reset by polling Vend
Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas: "Enumeration:
- Wait for device readiness after reset by polling Vendor ID and looking for Configuration RRS instead of polling the Command register and looking for non-error completions, to avoid hardware retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)
- Rename CRS Completion Status to RRS ('Request Retry Status') to match PCIe r6.0 spec usage (Bjorn Helgaas)
- Clear LBMS bit after a manual link retrain so we don't try to retrain a link when there's no downstream device anymore (Maciej W. Rozycki)
- Revert to the original link speed after retraining fails instead of leaving it restricted to 2.5GT/s, so a future device has a chance to use higher speeds (Maciej W. Rozycki)
- Wait for each level of downstream bus, not just the first, to become accessible before restoring devices on that bus (Ilpo Järvinen)
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups without having to stomp on the core's pdev->dev.groups (Lukas Wunner)
Driver binding:
- Export pcim_request_region(), a managed counterpart of pci_request_region(), for use by drivers (Philipp Stanner)
- Export pcim_iomap_region() and deprecate pcim_iomap_regions() (Philipp Stanner)
- Request the PCI BAR used by xboxvideo (Philipp Stanner)
- Request and map drm/ast BARs with pcim_iomap_region() (Philipp Stanner)
MSI:
- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a single IRQ line and cannot set the affinity of each MSI to a specific CPU core (Marek Vasut)
- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity() implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3, mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl, xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed' warnings (Marek Vasut)
Power management:
- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad Dybcio)
PCI device hotplug:
- Remove unnecessary hpc_ops struct from shpchp (ngn)
- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp (weiyufeng)
Virtualization:
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS but does provide ACS-like features (Subramanian Ananthanarayanan)
IOMMU:
- Add function 0 DMA alias quirk for Glenfly Arise audio function, which uses the function 0 Requester ID (WangYuli)
NPEM:
- Add Native PCIe Enclosure Management (NPEM) support for sysfs control of NVMe RAID storage indicators (ok/fail/locate/ rebuild/etc) (Mariusz Tkaczyk)
- Add support for the ACPI _DSM PCIe SSD status LED management, which is functionally similar to NPEM but mediated by platform firmware (Mariusz Tkaczyk)
Device trees:
- Drop minItems and maxItems from ranges in PCI generic host binding since host bridges may have several MMIO and I/O port apertures (Frank Li)
- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for clocks (Krzysztof Kozlowski)
Altera PCIe controller driver:
- Convert altera DT bindings from text to YAML (Matthew Gerlach)
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same thing and is what other drivers use (Jinjie Ruan)
Broadcom STB PCIe controller driver:
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller doesn't imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for maintainability (Bjorn Helgaas)
Freescale i.MX6 PCIe controller driver:
- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints (Richard Zhu)
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP Endpoints to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which is harmless for devices that implement their own internal PHY management and don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver Root Complex support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with fsl,lx2160ar2-pcie (Frank Li)
- Add layerscape-pcie DT binding deprecated 'num-viewport' property to address a DT checker warning (Frank Li)
- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array (Frank Li)
Loongson PCIe controller driver:
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets (Huacai Chen)
Marvell Aardvark PCIe controller driver:
- Fix issue with emulating Configuration RRS for two-byte reads of Vendor ID; previously it only worked for four-byte reads (Bjorn Helgaas)
MediaTek PCIe Gen3 controller driver:
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC types (Lorenzo Bianconi)
- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)
- Add DT and driver support for Airoha EN7581 PCIe controller (Lorenzo Bianconi)
Qualcomm PCIe controller driver:
- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan Ansari)
- Add back DT 'vddpe-3v3-supply', which was incorrectly removed earlier (Johan Hovold)
- Drop endpoint redundant masking of global IRQ events (Manivannan Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a flood (Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding (Manivannan Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is deasserted to partially avoid the problem that the endpoint SoC crashes when accessing things when Refclk is absent (Manivannan Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a NULL pointer dereference (Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- Make the read-only const array 'check_addr' static (Colin Ian King)
- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding (Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary handler is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe (Siddharth Vadapalli)
TI J721E PCIe driver:
- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable the ACSPCIE module to drive Refclk for the Endpoint (Siddharth Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link setup can be done separately during resume (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between Refclk becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
TI Keystone PCIe controller driver:
- Fix NULL pointer checking when applying MRRS limitation quirk for AM65x SR 1.0 Errata #i2037 (Dan Carpenter)
Xilinx NWL PCIe controller driver:
- Fix off-by-one error in INTx IRQ handler that caused INTx interrupts to be lost or delivered as the wrong interrupt (Sean Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
Xilinx XDMA PCIe controller driver:
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT binding and xilinx-dma-pl driver (Thippeswamy Havalige)
Miscellaneous:
- Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)
- Fix minor kerneldoc issues and typos (Bjorn Helgaas)
- Use PCI_DEVID() macro in aer_inject() instead of open-coding it (Jinjie Ruan)
- Check pcie_find_root_port() return in x86 fixups to avoid NULL pointer dereferences (Samasth Norway Ananda)
- Make pci_bus_type constant (Kunwu Chan)
- Remove unused declarations of __pci_pme_wakeup() and pci_vpd_release() (Yue Haibing)
- Remove any leftover .*.cmd files with make clean (zhang jiao)
- Remove unused BILLION macro (zhang jiao)"
* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits) PCI: Fix typos dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again tools: PCI: Remove unused BILLION macro tools: PCI: Remove .*.cmd files with make clean PCI: Pass domain number to pci_bus_release_domain_nr() explicitly PCI: dra7xx: Fix error handling when IRQ request fails in probe PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ PCI: qcom: Add RX lane margining settings for 16.0 GT/s PCI: qcom: Add equalization settings for 16.0 GT/s PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed' PCI: qcom-ep: Enable controller resources like PHY only after refclk is available PCI: Mark Creative Labs EMU20k2 INTx masking as broken dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint dt-bindings: PCI: altera: msi: Convert to YAML PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support PCI: Rename CRS Completion Status to RRS PCI: aardvark: Correct Configuration RRS checking PCI: Wait for device readiness with Configuration RRS PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings ...
show more ...
|
#
ed072e44 |
| 19-Sep-2024 |
Bjorn Helgaas <bhelgaas@google.com> |
Merge branch 'pci/sysfs'
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups without having to stomp on the core's pdev->dev.groups (Lukas Wunner)
* pci/sysfs: s390/pci: Stop usu
Merge branch 'pci/sysfs'
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups without having to stomp on the core's pdev->dev.groups (Lukas Wunner)
* pci/sysfs: s390/pci: Stop usurping pdev->dev.groups
show more ...
|
Revision tags: v6.11, v6.11-rc7, v6.11-rc6, v6.11-rc5, v6.11-rc4, v6.11-rc3 |
|
#
265baca6 |
| 05-Aug-2024 |
Lukas Wunner <lukas@wunner.de> |
s390/pci: Stop usurping pdev->dev.groups
Bjorn suggests using pdev->dev.groups for attribute_groups constructed on PCI device enumeration:
"Is it feasible to build an attribute group in pci_doe_i
s390/pci: Stop usurping pdev->dev.groups
Bjorn suggests using pdev->dev.groups for attribute_groups constructed on PCI device enumeration:
"Is it feasible to build an attribute group in pci_doe_init() and add it to dev->groups so device_add() will automatically add them?" https://lore.kernel.org/r/20231019165829.GA1381099@bhelgaas
Unfortunately on s390, pcibios_device_add() usurps pdev->dev.groups for arch-specific attribute_groups, preventing its use for anything else.
Introduce an ARCH_PCI_DEV_GROUPS macro which arches can define in <asm/pci.h>. The macro is visible in drivers/pci/pci-sysfs.c through the inclusion of <linux/pci.h>, which in turn includes <asm/pci.h>.
On s390, define the macro to the three attribute_groups previously assigned to pdev->dev.groups. Thereby pdev->dev.groups is made available for use by the PCI core.
As a side effect, arch/s390/pci/pci_sysfs.c no longer needs to be compiled into the kernel if CONFIG_SYSFS=n.
Link: https://lore.kernel.org/r/7b970f7923e373d1b23784721208f93418720485.1722870934.git.lukas@wunner.de Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
show more ...
|
Revision tags: v6.11-rc2, v6.11-rc1 |
|
#
a23e1966 |
| 15-Jul-2024 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 6.11 merge window.
|
Revision tags: v6.10, v6.10-rc7, v6.10-rc6, v6.10-rc5, v6.10-rc4, v6.10-rc3, v6.10-rc2 |
|
#
6f47c7ae |
| 28-May-2024 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v6.9' into next
Sync up with the mainline to bring in the new cleanup API.
|
Revision tags: v6.10-rc1 |
|
#
60a2f25d |
| 16-May-2024 |
Tvrtko Ursulin <tursulin@ursulin.net> |
Merge drm/drm-next into drm-intel-gt-next
Some display refactoring patches are needed in order to allow conflict- less merging.
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
Revision tags: v6.9, v6.9-rc7, v6.9-rc6, v6.9-rc5, v6.9-rc4, v6.9-rc3, v6.9-rc2, v6.9-rc1, v6.8, v6.8-rc7, v6.8-rc6, v6.8-rc5, v6.8-rc4, v6.8-rc3, v6.8-rc2, v6.8-rc1 |
|
#
0ea5c948 |
| 15-Jan-2024 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next
Backmerge to bring Xe driver to drm-intel-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
#
03c11eb3 |
| 14-Feb-2024 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch
Conflicts: arch/x86/include/asm/percpu.h arch/x86/include/asm/text-patching.h
Signed-off-by: Ingo Molnar <mingo@k
Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch
Conflicts: arch/x86/include/asm/percpu.h arch/x86/include/asm/text-patching.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
show more ...
|
Revision tags: v6.7, v6.7-rc8, v6.7-rc7 |
|
#
ab1c2470 |
| 19-Dec-2023 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
Merge remote-tracking branch 'torvalds/master' into perf-tools-next
To pick up fixes that went thru perf-tools for v6.7 and to get in sync with upstream to check for drift in the copies of headers,
Merge remote-tracking branch 'torvalds/master' into perf-tools-next
To pick up fixes that went thru perf-tools for v6.7 and to get in sync with upstream to check for drift in the copies of headers, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
show more ...
|
#
6b93f350 |
| 08-Jan-2024 |
Jiri Kosina <jkosina@suse.com> |
Merge branch 'for-6.8/amd-sfh' into for-linus
- addition of new interfaces to export User presence information and Ambient light from amd-sfh to other drivers within the kernel (Basavaraj Natika
Merge branch 'for-6.8/amd-sfh' into for-linus
- addition of new interfaces to export User presence information and Ambient light from amd-sfh to other drivers within the kernel (Basavaraj Natikar)
show more ...
|
Revision tags: v6.7-rc6, v6.7-rc5, v6.7-rc4, v6.7-rc3, v6.7-rc2 |
|
#
3bf3e21c |
| 15-Nov-2023 |
Maxime Ripard <mripard@kernel.org> |
Merge drm/drm-next into drm-misc-next
Let's kickstart the v6.8 release cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
#
5d2d4a9f |
| 15-Nov-2023 |
Peter Zijlstra <peterz@infradead.org> |
Merge branch 'tip/perf/urgent'
Avoid conflicts, base on fixes.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
#
849d3f98 |
| 21-Nov-2023 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Merge tag 'thunderbolt-for-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v6.7-rc3
This includes following USB4/T
Merge tag 'thunderbolt-for-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v6.7-rc3
This includes following USB4/Thunderbolt fixes for v6.7-rc3:
- Fix a lane bonding issue on ASMedia USB4 device - Send uevents when link is switched to asymmetric or symmetric - Only add device router DP IN adapters to the head of resource list to avoid issues during system resume.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (1451 commits) thunderbolt: Only add device router DP IN to the head of the DP resource list thunderbolt: Send uevent after asymmetric/symmetric switch thunderbolt: Set lane bonding bit only for downstream port
show more ...
|
Revision tags: v6.7-rc1 |
|
#
4bbdb725 |
| 09-Nov-2023 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel: "Core changes: - Make default-domains mandatory for all IOMMU dri
Merge tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel: "Core changes: - Make default-domains mandatory for all IOMMU drivers - Remove group refcounting - Add generic_single_device_group() helper and consolidate drivers - Cleanup map/unmap ops - Scaling improvements for the IOVA rcache depot - Convert dart & iommufd to the new domain_alloc_paging()
ARM-SMMU: - Device-tree binding update: - Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC - SMMUv2: - Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs - SMMUv3: - Large refactoring of the context descriptor code to move the CD table into the master, paving the way for '->set_dev_pasid()' support on non-SVA domains - Minor cleanups to the SVA code
Intel VT-d: - Enable debugfs to dump domain attached to a pasid - Remove an unnecessary inline function
AMD IOMMU: - Initial patches for SVA support (not complete yet)
S390 IOMMU: - DMA-API conversion and optimized IOTLB flushing
And some smaller fixes and improvements"
* tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits) iommu/dart: Remove the force_bypass variable iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging() iommu/dart: Convert to domain_alloc_paging() iommu/dart: Move the blocked domain support to a global static iommu/dart: Use static global identity domains iommufd: Convert to alloc_domain_paging() iommu/vt-d: Use ops->blocked_domain iommu/vt-d: Update the definition of the blocking domain iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain Revert "iommu/vt-d: Remove unused function" iommu/amd: Remove DMA_FQ type from domain allocation path iommu: change iommu_map_sgtable to return signed values iommu/virtio: Add __counted_by for struct viommu_request and use struct_size() iommu/vt-d: debugfs: Support dumping a specified page table iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid} iommu/vt-d: debugfs: Dump entry pointing to huge page iommu/vt-d: Remove unused function iommu/arm-smmu-v3-sva: Remove bond refcount iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle iommu/arm-smmu-v3: Rename cdcfg to cd_table ...
show more ...
|
Revision tags: v6.6 |
|
#
e8cca466 |
| 27-Oct-2023 |
Joerg Roedel <jroedel@suse.de> |
Merge branches 'iommu/fixes', 'arm/tegra', 'arm/smmu', 'virtio', 'x86/vt-d', 'x86/amd', 'core' and 's390' into next
|
Revision tags: v6.6-rc7, v6.6-rc6, v6.6-rc5, v6.6-rc4 |
|
#
c76c067e |
| 28-Sep-2023 |
Niklas Schnelle <schnelle@linux.ibm.com> |
s390/pci: Use dma-iommu layer
While s390 already has a standard IOMMU driver and previous changes have added I/O TLB flushing operations this driver is currently only used for user-space PCI access
s390/pci: Use dma-iommu layer
While s390 already has a standard IOMMU driver and previous changes have added I/O TLB flushing operations this driver is currently only used for user-space PCI access such as vfio-pci. For the DMA API s390 instead utilizes its own implementation in arch/s390/pci/pci_dma.c which drives the same hardware and shares some code but requires a complex and fragile hand over between DMA API and IOMMU API use of a device and despite code sharing still leads to significant duplication and maintenance effort. Let's utilize the common code DMAP API implementation from drivers/iommu/dma-iommu.c instead allowing us to get rid of arch/s390/pci/pci_dma.c.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230928-dma_iommu-v13-3-9e5fc4dacc36@linux.ibm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
show more ...
|
Revision tags: v6.6-rc3, v6.6-rc2, v6.6-rc1, v6.5, v6.5-rc7, v6.5-rc6, v6.5-rc5, v6.5-rc4, v6.5-rc3, v6.5-rc2, v6.5-rc1, v6.4, v6.4-rc7, v6.4-rc6, v6.4-rc5, v6.4-rc4, v6.4-rc3, v6.4-rc2, v6.4-rc1, v6.3, v6.3-rc7, v6.3-rc6, v6.3-rc5, v6.3-rc4, v6.3-rc3, v6.3-rc2, v6.3-rc1, v6.2, v6.2-rc8, v6.2-rc7, v6.2-rc6, v6.2-rc5, v6.2-rc4, v6.2-rc3, v6.2-rc2, v6.2-rc1 |
|
#
4f2c0a4a |
| 14-Dec-2022 |
Nick Terrell <terrelln@fb.com> |
Merge branch 'main' into zstd-linus
|
#
e291c116 |
| 12-Dec-2022 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 6.2 merge window.
|
Revision tags: v6.1, v6.1-rc8, v6.1-rc7 |
|
#
29583dfc |
| 21-Nov-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-next into drm-misc-next-fixes
Backmerging to update drm-misc-next-fixes for the final phase of the release cycle.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
Revision tags: v6.1-rc6 |
|
#
002c6ca7 |
| 14-Nov-2022 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-next
Catch up on 6.1-rc cycle in order to solve the intel_backlight conflict on linux-next.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
Revision tags: v6.1-rc5, v6.1-rc4 |
|
#
d93618da |
| 04-Nov-2022 |
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> |
Merge drm/drm-next into drm-intel-gt-next
Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator") which is needed for series https://patchwork.freedesktop.org/s
Merge drm/drm-next into drm-intel-gt-next
Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator") which is needed for series https://patchwork.freedesktop.org/series/110083/ .
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
show more ...
|
Revision tags: v6.1-rc3, v6.1-rc2 |
|
#
14e77332 |
| 22-Oct-2022 |
Nick Terrell <terrelln@fb.com> |
Merge branch 'main' into zstd-next
|
#
1aca5ce0 |
| 20-Oct-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-fixes into drm-misc-fixes
Backmerging to get v6.1-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
#
a140a6a2 |
| 18-Oct-2022 |
Maxime Ripard <maxime@cerno.tech> |
Merge drm/drm-next into drm-misc-next
Let's kick-off this release cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
#
c29a017f |
| 17-Oct-2022 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v6.1-rc1' into next
Merge with mainline to bring in the latest changes to twl4030 driver.
|