Merge drm/drm-next into drm-misc-next

Let's start the 5.19 development cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Raise minimum supported machine generation to z10, which comes with
v

Merge tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Raise minimum supported machine generation to z10, which comes with
various cleanups and code simplifications (usercopy/spectre
mitigation/etc).

- Rework extables and get rid of anonymous out-of-line fixups.

- Page table helpers cleanup. Add set_pXd()/set_pte() helper functions.
Covert pte_val()/pXd_val() macros to functions.

- Optimize kretprobe handling by avoiding extra kprobe on
__kretprobe_trampoline.

- Add support for CEX8 crypto cards.

- Allow to trigger AP bus rescan via writing to /sys/bus/ap/scans.

- Add CONFIG_EXPOLINE_EXTERN option to build the kernel without COMDAT
group sections which simplifies kpatch support.

- Always use the packed stack layout and extend kernel unwinder tests.

- Add sanity checks for ftrace code patching.

- Add s390dbf debug log for the vfio_ap device driver.

- Various virtual vs physical address confusion fixes.

- Various small fixes and improvements all over the code.

* tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (69 commits)
s390/test_unwind: add kretprobe tests
s390/kprobes: Avoid additional kprobe in kretprobe handling
s390: convert ".insn" encoding to instruction names
s390: assume stckf is always present
s390/nospec: move to single register thunks
s390: raise minimum supported machine generation to z10
s390/uaccess: Add copy_from/to_user_key functions
s390/nospec: align and size extern thunks
s390/nospec: add an option to use thunk-extern
s390/nospec: generate single register thunks if possible
s390/pci: make zpci_set_irq()/zpci_clear_irq() static
s390: remove unused expoline to BC instructions
s390/irq: use assignment instead of cast
s390/traps: get rid of magic cast for per code
s390/traps: get rid of magic cast for program interruption code
s390/signal: fix typo in comments
s390/asm-offsets: remove unused defines
s390/test_unwind: avoid build warning with W=1
s390: remove .fixup section
s390/bpf: encode register within extable entry
...

show more ...

s390: raise minimum supported machine generation to z10

Machine generations up to z9 (released in May 2006) have been officially
out of service for several years now (z9 end of service - January 31,

s390: raise minimum supported machine generation to z10

Machine generations up to z9 (released in May 2006) have been officially
out of service for several years now (z9 end of service - January 31, 2019).
No distributions build kernels supporting those old machine generations
anymore, except Debian, which seems to pick the oldest supported
generation. The team supporting Debian on s390 has been notified about
the change.

Raising minimum supported machine generation to z10 helps to reduce
maintenance cost and effectively remove code, which is not getting
enough testing coverage due to lack of older hardware and distributions
support. Besides that this unblocks some optimization opportunities and
allows to use wider instruction set in asm files for future features
implementation. Due to this change spectre mitigation and usercopy
implementations could be drastically simplified and many newer instructions
could be converted from ".insn" encoding to instruction names.

Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390/asm-offsets: remove unused defines

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Merge tag 'v5.17-rc4' into for-linus

Merge with mainline to get the Intel ASoC generic helpers header and
other changes.

s390/dump: fix old lowcore virtual vs physical address confusion

Virtual addresses of vmcore_info and os_info members are
wrongly passed to copy_oldmem_kernel(), while the function
expects physical

s390/dump: fix old lowcore virtual vs physical address confusion

Virtual addresses of vmcore_info and os_info members are
wrongly passed to copy_oldmem_kernel(), while the function
expects physical address of the source. Instead, __pa()
macro should have been applied.

Yet, use of __pa() macro could be somehow confusing, since
copy_oldmem_kernel() may treat the source as an offset, not
as a direct physical address (that depens from the oldmem
availability and location).

Fix the virtual vs physical address confusion and make the
way the old lowcore is read consistent across all sources.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

Merge tag 'v5.16' into next

Sync up with mainline to bring in the latest API changes.

Merge branch 'next' into for-linus

Prepare input updates for 5.17 merge window.

Merge branch 'for-5.17/core' into for-linus

- support for USI style pens (Tero Kristo, Mika Westerberg)
- quirk for devices that need inverted X/Y axes (Alistair Francis)
- small core code cleanups

Merge branch 'for-5.17/core' into for-linus

- support for USI style pens (Tero Kristo, Mika Westerberg)
- quirk for devices that need inverted X/Y axes (Alistair Francis)
- small core code cleanups and deduplication (Benjamin Tissoires)

show more ...

Merge branch 'for-next' into for-linus

Pull 5.17 materials.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to bring drm-misc-next-fixes up to the latest state for
the current release cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not specified in the device tree, this function
returns NULL instead of an error."

This dependency is needed for the Generic Timer Module (a.k.a OSTM)
support for RZ/G2L.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

show more ...

Merge tag 'v5.15' into next

Sync up with the mainline to get the latest APIs and DT bindings.

Merge drm/drm-next into drm-intel-next

Sync up with drm-next to get v5.16-rc2.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Thomas needs the dma_resv_for_each_fence API for i915/ttm async migration
work.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging from drm/drm-next for v5.16-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-fixes into drm-misc-fixes

We need -rc1 to address a breakage in drm/scheduler affecting panfrost.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Add support for ftrace with direct call and ftrace direct call
sample

Merge tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Add support for ftrace with direct call and ftrace direct call
samples.

- Add support for kernel command lines longer than current 896 bytes
and make its length configurable.

- Add support for BEAR enhancement facility to improve last breaking
event instruction tracking.

- Add kprobes sanity checks and testcases to prevent kprobe in the mid
of an instruction.

- Allow concurrent access to /dev/hwc for the CPUMF users.

- Various ftrace / jump label improvements.

- Convert unwinder tests to KUnit.

- Add s390_iommu_aperture kernel parameter to tweak the limits on
concurrently usable DMA mappings.

- Add ap.useirq AP module option which can be used to disable interrupt
use.

- Add add_disk() error handling support to block device drivers.

- Drop arch specific and use generic implementation of strlcpy and
strrchr.

- Several __pa/__va usages fixes.

- Various cio, crypto, pci, kernel doc and other small fixes and
improvements all over the code.

[ Merge fixup as per https://lore.kernel.org/all/YXAqZ%2FEszRisunQw@osiris/ ]

* tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (63 commits)
s390: make command line configurable
s390: support command lines longer than 896 bytes
s390/kexec_file: move kernel image size check
s390/pci: add s390_iommu_aperture kernel parameter
s390/spinlock: remove incorrect kernel doc indicator
s390/string: use generic strlcpy
s390/string: use generic strrchr
s390/ap: function rework based on compiler warning
s390/cio: make ccw_device_dma_* more robust
s390/vfio-ap: s390/crypto: fix all kernel-doc warnings
s390/hmcdrv: fix kernel doc comments
s390/ap: new module option ap.useirq
s390/cpumf: Allow multiple processes to access /dev/hwc
s390/bitops: return true/false (not 1/0) from bool functions
s390: add support for BEAR enhancement facility
s390: introduce nospec_uses_trampoline()
s390: rename last_break to pgm_last_break
s390/ptrace: add last_break member to pt_regs
s390/sclp: sort out physical vs virtual pointers usage
s390/setup: convert start and end initrd pointers to virtual
...

show more ...

s390: support command lines longer than 896 bytes

Currently s390 supports a fixed maximum command line length of 896
bytes. This isn't enough as some installers are trying to pass all
configuration

s390: support command lines longer than 896 bytes

Currently s390 supports a fixed maximum command line length of 896
bytes. This isn't enough as some installers are trying to pass all
configuration data via kernel command line, and even with zfcp alone
it is easy to generate really long command lines. Therefore extend
the command line to 4 kbytes.

In the parm area where the command line is stored there is no indication
of the maximum allowed length, so a new field which contains the maximum
length is added.

The parm area has always been initialized to zero, so with old kernels
this field would read zero. This is important because tools like zipl
could read this field. If it contains a number larger than zero zipl
knows the maximum length that can be stored in the parm area, otherwise
it must assume that it is booting a legacy kernel and only 896 bytes are
available.

The removing of trailing whitespace in head.S is also removed because
code to do this is already present in setup_boot_command_line().

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390: add support for BEAR enhancement facility

The Breaking-Event-Address-Register (BEAR) stores the address of the
last breaking event instruction. Breaking events are usually instructions
that ch

s390: add support for BEAR enhancement facility

The Breaking-Event-Address-Register (BEAR) stores the address of the
last breaking event instruction. Breaking events are usually instructions
that change the program flow - for example branches, and instructions
that modify the address in the PSW like lpswe. This is useful for debugging
wild branches, because one could easily figure out where the wild branch
was originating from.

What is problematic is that lpswe is considered a breaking event, and
therefore overwrites BEAR on kernel exit. The BEAR enhancement facility
adds new instructions that allow to save/restore BEAR and also an lpswey
instruction that doesn't cause a breaking event. So we can save BEAR on
kernel entry and restore it on exit to user space.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390: rename last_break to pgm_last_break

With the upcoming BEAR enhancements last_break isn't really
unique, so rename it to pgm_last_break. This way it should
be more obvious that this is the last

s390: rename last_break to pgm_last_break

With the upcoming BEAR enhancements last_break isn't really
unique, so rename it to pgm_last_break. This way it should
be more obvious that this is the last_break value that is
written by the hardware when a program check occurs.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390: make STACK_FRAME_OVERHEAD available via asm-offsets.h

Make STACK_FRAME_OVERHEAD available via asm-offsets.h. This allows to
add s390 specific asm code to e.g. ftrace samples, without requiring

s390: make STACK_FRAME_OVERHEAD available via asm-offsets.h

Make STACK_FRAME_OVERHEAD available via asm-offsets.h. This allows to
add s390 specific asm code to e.g. ftrace samples, without requiring
to add random header files, which might cause all sort of problems on
other architectures. asm-offsets.h can be assumed to be non-problematic.

Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20211012133802.2460757-3-hca@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

Merge branch 'pruss-fix' into fixes

Merge in a fix for pruss reset issue caused by enabling pruss for am335x.

Merge tag 'v5.15-rc2' into spi-5.15

Linux 5.15-rc2

Merge drm/drm-next into drm-intel-next

Catch-up on 5.15-rc1 and sync with drm-intel-gt-next
to prepare the PXP topic branch.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>